ABSTRACT
PURPOSE: To determine associations between lid wiper microvascular responses, lens fit, and comfort after 1 day of contact lens adaptation by neophytes. METHODS: Functional slitlamp biomicroscopy was used to image the microvascular network of the upper tarsal conjunctiva, lid wiper, and bulbar conjunctiva. Fractal dimension was obtained to represent vessel density. Ultra-high-resolution optical coherence tomography was used to image the lens edge and fitting characteristics, including lens movement and lens-induced conjunctival indentation. Ocular comfort was rated using a 50-point visual analogue scale (VAS). Forty-nine healthy subjects without a history of contact lens wear were recruited. A contact lens was then fitted in the right eye. Imaging was taken at baseline and 6 hr after lens wear. RESULTS: The changes of VAS comfort score were negatively related to the changes of the vessel density in the lid-wiper (R 2 =0.18, P =0.002) and bulbar conjunctiva (R 2 =0.13, P =0.009). However, the changes of VAS were positively related to the changes in vessel density of the tarsal conjunctiva (R 2 =0.11, P =0.02). The changes of ocular microvasculature were not related to the objective metrics of the lens-fitting characteristics ( P >0.05). Similarly, the changes in the VAS comfort score were not related to the objective metrics of the lens-fitting characteristics ( P >0.05). CONCLUSION: Contact lens discomfort seemed to relate to lid wiper microvascular responses rather than fitting characteristics after 1 day of contact lens adaptation by neophytes.
Subject(s)
Contact Lenses, Hydrophilic , Contact Lenses , Conjunctiva/blood supply , Humans , MicrovesselsABSTRACT
PURPOSE: To determine the interaction of contact lenses of different materials with corneal epithelial cells grown in tissue culture. METHODS: Two different corneal epithelial cell lines were grown to confluence in culture media. Two hydrogel contact lenses with and without polyvinylpyrrolidone (PVP) {1-DAY ACUVUE MOIST (1-Day ACUVUE [hydrogel lenses]) and a silicone hydrogel contact lens, AIR OPTIX NIGHT & DAY} were removed from their blister packs, washed in phosphate-buffered saline, and applied to the cells. After exposure for 24 hr at 37°C, lenses were removed, and the corneal cells and supernatants processed. Supernatants from the cell assays were used to quantify the amount of 17 different cytokines that were produced using a multiplex bead assay. Cells were stained to assess amount of cell death (apoptosis or necrosis) or stained to determine the level of mitochondrial activity. Stimulants of necrotic death (latex) or apoptotic death (sorbitol) were used as positive controls. RESULTS: Cells produced cytokines during normal growth. Exposure of cells to the hydrogel lenses resulted in only minimal changes to normal production of cytokines, but latex or sorbitol produced the most change. Exposure of the cells to all three lenses caused 4% to 23% reduction in mitochondrial activity, whereas exposure to the positive controls caused 71% to 98% reduction in mitochondrial activity. Exposure of the corneal epithelial cells to contact lenses produced minimal morphological changes, whereas exposure to latex or sorbitol produced significant changes to the human corneal epithelial cell line. CONCLUSIONS: Exposure of corneal epithelial cells to contact lenses had minimal impact on their physiology. There was no difference in epithelial cell responses to hydrogel with or without PVP compared with the silicone hydrogel contact lens.
Subject(s)
Contact Lenses, Hydrophilic , Epithelium, Corneal/cytology , Materials Testing/methods , Apoptosis , Cell Line , Cytokines/biosynthesis , Epithelium, Corneal/growth & development , Epithelium, Corneal/metabolism , Humans , Limbus Corneae/cytology , Limbus Corneae/growth & development , Limbus Corneae/metabolism , Silicones , Tissue Culture TechniquesABSTRACT
SIGNIFICANCE: Albumin deposition on contact lenses could be detrimental to contact lens (CL) wear because this may increase the risk of bacterial binding and reduce comfort. Lysozyme deposition on selected lens materials would reduce albumin deposition on lenses. PURPOSE: This study aims to determine if lysozyme deposition on CLs could act as a barrier against subsequent albumin adsorption, using an in vitro model. METHODS: Six hydrogel CL materials (etafilcon A, polymacon, nelfilcon A, omafilcon A, ocufilcon B, and nesofilcon A) were evaluated. Four CLs of each type were soaked in lysozyme solution for 16 hours at 37°C. Lysozyme-coated lenses were then placed in vials with 1.5 mL of artificial tear solution containing I-labeled albumin for 16 hours at 37°C with shaking. Four uncoated lenses of each type were used as controls. Lenses soaked in radiolabeled albumin were rinsed in a phosphate-buffered saline solution, and radioactive counts were measured directly on lenses using a gamma counter. Albumin uptake on lenses was measured using a calibration curve by plotting radioactive counts versus protein concentration. RESULTS: Results are reported as mean ± SD. Lysozyme-coated etafilcon A lenses exhibited lower levels of deposited albumin than uncoated etafilcon A lenses (58 ± 12 vs. 84 ± 5 ng/lens; P < .05). There were no differences in albumin adsorption between control (uncoated) and lysozyme-coated polymacon (105 ± 10 vs. 110 ± 34 ng/lens), nelfilcon A (51 ± 7 vs. 42 ± 20 ng/lens), omafilcon A (90 ± 20 vs. 80 ± 38 ng/lens), ocufilcon B (87 ± 20 vs. 115 ± 50 ng/lens), and nesofilcon A (170 ± 29 vs. 161 ± 10 ng/lens) lens materials (P > .05). Uncoated nesofilcon A lenses deposited the highest amount of albumin when compared with other uncoated lenses (P < .05). CONCLUSIONS: This study demonstrates that lysozyme deposited onto etafilcon A resists the deposition of albumin, which may potentially be beneficial to CL wearers.
Subject(s)
Albumins/analysis , Contact Lenses, Hydrophilic/microbiology , Hydrogels , Muramidase/pharmacology , Anti-Infective Agents/pharmacology , Eye Infections, Bacterial/prevention & control , HumansABSTRACT
Within a few minutes of wear, contact lenses become rapidly coated with a variety of tear film components, including proteins, lipids, and mucins. Tears have a rich and complex composition, allowing a wide range of interactions and competitive processes, with the first event observed at the interface between a contact lens and tear fluid being protein adsorption. Protein adsorption on hydrogel contact lenses is a complex process involving a variety of factors relating to both the protein in question and the lens material. Among tear proteins, lysozyme is a major protein that has both antibacterial and anti-inflammatory functions. Contact lens materials that have high ionicity and high water content have an increased affinity to accumulate lysozyme during wear, when compared with other soft lens materials, notably silicone hydrogel lenses. This review provides an overview of tear film proteins, with a specific focus on lysozyme, and examines various factors that influence protein deposition on contact lenses. In addition, the impact of lysozyme deposition on various ocular physiological responses and bacterial adhesion to lenses and the interaction of lysozyme with other tear proteins are reviewed. This comprehensive review suggests that deposition of lysozyme on contact lens materials may provide a number of beneficial effects during contact lens wear.
Subject(s)
Contact Lenses, Hydrophilic , Eye Proteins/metabolism , Muramidase/metabolism , Adsorption , Humans , Hydrogel, Polyethylene Glycol Dimethacrylate , Protein Binding , Tears/metabolismABSTRACT
CLINICAL RELEVANCE: A leading reason for patients to abandon their contact lenses is discomfort. Mechanisms and biomarkers for lens discomfort remain to be elucidated. BACKGROUND: Physical stress and tear film interaction are likely factors for lens discomfort. Lipid mediators are generated from polyunsaturated fatty acids. They regulate ocular surface physiology and pathophysiology, are constituents of human tears and may interact with contact lenses. This study set out to determine if hydrogel lenses and silicone hydrogel lenses interact with tear film polyunsaturated fatty acids and polyunsaturated fatty acids-derived mediators. METHODS: In vitro incubations, rat experiments and analysis of worn human lenses assessed polyunsaturated fatty acids and lipid mediator interactions with lenses. Silicone hydrogel and hydrogel lenses were incubated with lipid mediators and polyunsaturated fatty acids up to 24 hours. Rats were fitted with custom silicone hydrogel lenses and basal tears collected. Silicone hydrogel lenses worn for 2 weeks were obtained from 57 human subjects. Tear and lens lipidomes were quantified by mass spectrometry. RESULTS: Silicone hydrogel lenses retained polyunsaturated fatty acids and lipid mediators within 15 minutes in vitro. Lenses contained 90% of total polyunsaturated fatty acids and 83-89% of total monohydroxy fatty acids by 12 hours. Retention correlated with polarity of lipid mediators and lipophilic properties of silicone hydrogel lenses. Polyunsaturated fatty acids and lipid mediators such as lipoxygenase- and cyclooxygenase-derived eicosanoids were present in tears and worn lenses from rats. Worn silicone hydrogel lenses from human subjects established robust and lens-type specific lipidomes with high levels of polyunsaturated fatty acids, lipoxygenase-pathway markers and subject-specific differences in lipoxin A4 and leukotriene B4. CONCLUSION: Worn silicone hydrogel lenses rapidly retain and accumulate tear polyunsaturated fatty acids and lipid mediators. Marked subject and lens type differences in the lipidome may document changes in ocular surface physiology, cell activation or infection that are associated with lens wear. If contact lens discomfort and adverse events induce specific tear and lens fatty acid and lipid mediator profiles warrants further studies.
Subject(s)
Contact Lenses, Hydrophilic , Silicones , Humans , Animals , Rats , Hydrogels , Contact Lenses, Hydrophilic/adverse effects , Lipids/analysis , Eicosanoids/analysis , Eicosanoids/metabolism , Lipoxygenases/metabolism , Tears/chemistry , Hydrogel, Polyethylene Glycol DimethacrylateABSTRACT
Purpose: Contact lens-induced discomfort (CLD) remains a primary factor in discontinuation or prevention of contact lens wear. Thus, we investigated the role of ocular surface immune cells in subjects with CLD. Methods: Habitual contact lens (CL) wearers with CLD (n = 19; 38 eyes) and without CLD (n = 21; 42 eyes) as determined by the Contact Lens Dry Eye Questionnaire-8 was included in a trial. Enrolled subjects used either of the two types of CL (designated as CL-A or CL-D). Ocular surface cells from the bulbar conjunctiva were obtained by impression cytology. The collected cells were phenotyped using fluorochrome-conjugated antibodies specific for leukocytes (CD45+), neutrophils (CD66b+,High,Low), macrophages (CD163+), T cells (CD3+CD4+, CD3+CD8+), natural killer (NK) cells (CD56+, High, Low), natural killer T (NKT) cells (CD3+CD56+), and gamma delta T (γδT) cells (CD3+γδTCR+) by flow cytometry. Further, corneal dendritic cell density (cDCD) was also determined using in vivo confocal microscopy. Results: Significantly higher proportions of CD45+ cells were observed in subjects with CLD compared to those without CLD. The percentages of CD66bTotal,Low, CD163+, pan T cells, CD4+T cells, CD8+T cells, CD56Total,High,Low (NK) cells, and NKT cells, as well as the CD4/CD8 ratio, were significantly higher in CLD subjects. The proportion of T cells (CD4, CD8, CD4/CD8 ratio, NKT cells) and macrophages exhibited a direct association with discomfort score. The percentages of CD45+, CD66bTotal,Low, CD163+, CD3+, CD56Total,High,Low, and NKT cells and cDCD were significantly higher in CLD subjects wearing CL-D. The percentages of CD66bHigh, CD4+T cells, CD8+T cells, NKT cells, and CD4/CD8 ratio were significantly higher in CLD subjects wearing CL-A. Conclusions: Increased proportions of ocular surface immune cells are observed in CLD, and the lens type could impact the immune cells associated with CLD. Translational Relevance: The association between the proportion of altered ocular surface immune cell subsets and contact lens-induced discomfort underpins the importance of considering immune-related aspects during contact lens development and in the clinical management of ocular surface pain.
Subject(s)
Contact Lenses , Dry Eye Syndromes , Conjunctiva , Contact Lenses/adverse effects , Cornea , Humans , Killer Cells, NaturalABSTRACT
PURPOSE: Lipid deposition on contact lenses (CL) has traditionally been believed to reduce comfort during CL wear. The purpose of this study was to quantify lipid deposition on CL in a group of symptomatic and asymptomatic adapted CL wearers. METHODS: This was a single-masked, randomized clinical trial. Only confirmed symptomatic (comfortable lens wear time (CWT) < 8 h and a noticeable reduction in comfort over the course of the day) and asymptomatic (CWT > 10 h and minimal reduction in comfort over the course of the day) participants were recruited to participate in the study. Participants wore senofilcon A lenses in combination with a polyquaternium-based care solution (OPTI-FREE Replenish). Worn CL samples were collected on Day 14. Deposited lipid amounts from the lenses (including cholesteryl ester, cholesterol and triolein) were quantified using a liquid chromatography-mass spectrometry technique. RESULTS: Lipid deposition was significantly higher in CL extracts of asymptomatic wearers compared to the symptomatic wearers for all lipid types quantified, including cholesteryl ester (2.1 ± 0.6 vs 1.6 ± 0.5 log µg/lens), cholesterol (1.5 ± 0.3 vs 1.1 ± 0.3 log µg/lens) and triolein (0.3 ± 0.2 vs 0.1 ± 0.1 log µg/lens) (all p < 0.002). The amount of cholesteryl ester deposited was greatest (p = 0.0001), followed by cholesterol, then triolein, for both the asymptomatic and symptomatic groups (both p = 0.0001). CONCLUSION: This study demonstrated that the asymptomatic group deposited a significantly greater amount of lipid on their CL. Although lipid levels measured are considered low to trigger any observable clinical deposition, they may influence other clinical outcomes, particularly comfort.
Subject(s)
Contact Lenses, Hydrophilic , Contact Lenses , Humans , Lipids , Single-Blind MethodABSTRACT
PURPOSE: The deposition profile of cholesteryl ester on the surface and throughout the matrix of silicone hydrogel contact lens (CL) materials was determined under conditions that mimic a daily wear regimen. METHODS: In this in vitro study, four SiHy CL materials (senofilcon C, lotrafilcon B, comfilcon A and samfilcon A) were incubated in an artificial tear solution (ATS) for up to 30 days. CL incubation was alternated between the ATS (16 hours) and a multipurpose care regimen (8 hours). The ATS included fluorescently tagged cholesteryl ester (5-cholesten-3ß-ol 6-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]caproate; CE-NBD) and confocal laser scanning microscopy visualized the distribution of the lipid through the CLs. RESULTS: The distribution of CE-NBD was homogenous from the anterior to posterior surface in senofilcon C and comfilcon A, at all time points. For lotrafilcon B and samfilcon A, CE-NBD localization was heterogeneous, with greater amounts on the surfaces on Day 1 and Day 14 compared to the lens matrix; however, differences in concentration between the surface and bulk diminished by Day 30. CONCLUSION: The distribution of the non-polar lipid CE-NBD varied with lens material chemistry. While some lens materials deposited the lipid primarily on the surface after 16 hours of exposure, all materials exhibited a homogenous distribution after one month.
ABSTRACT
Purpose: This study investigated kinetic lipid uptake to four silicone hydrogel (SiHy) lenses over a period of four weeks, using an in-vitro radiolabel method. Methods: Four contemporary monthly replacement SiHy lenses (lotrafilcon B, senofilcon C, comfilcon A, samfilcon A) were incubated in three different solutions: 1) An artificial tear solution (ATS) containing 14C-labeled phosphatidylcholine (PC), 2) an ATS containing 14C-cholesteryl oleate (CO) and 3) an ATS containing four 14C-radiolabeled lipids (PC, phosphatidylethanolamine, CO, and cholesterol (total lipid)). After 16 hours, lipids were extracted twice from the lenses with chloroform:methanol and the radioactive counts determined the lipid quantities to simulate 1 day of wear. OPTI-FREE PureMoist (Alcon) was used to clean and disinfect the remaining lenses daily and the lipid quantities were further determined after 2 weeks and 4 weeks. Results: The amount of total lipid increased for all lenses over time (p < .01). After four weeks, total lipid accumulated was 20.26 ± 0.15 µg/lens for senofilcon C, which was significantly higher (p < .01) than all other lens materials (samfilcon A - 17.84 ± 0.21; comfilcon A - 16.65 ± 0.12; lotrafilcon B - 7.41 ± 0.56 µg/lens). CO was highest on lotrafilcon B (1.26 ± 0.13 µg/lens) and senofilcon C attracted the most PC (3.95 ± 0.12 µg/lens) compared to the other materials. Conclusion: The amount of both polar and non-polar lipid deposition on monthly replacement SiHy lenses increased over 4 weeks, with significant differences being seen between lens materials.
Subject(s)
Cholesterol Esters/metabolism , Cholesterol/metabolism , Contact Lenses, Hydrophilic , Phosphatidylcholines/metabolism , Phosphatidylethanolamines/metabolism , Tears/metabolism , Lipid Metabolism/physiology , Silicones/metabolismABSTRACT
Purpose: During contact lens wear, the amount of lysozyme deposited on contact lenses varies depending on the lens material. The binding of lysozyme to some contact lens materials may result in a conformational change that denatures the protein to an inactive form. This investigation evaluated the effect that denatured lysozyme has on human corneal epithelial cells (HCECs) by measuring cell viability and the release of inflammatory cytokines. Methods: HCECs were exposed to lysozyme that was denatured to various activity levels. After 24-hour exposure to the lysozyme (1.9 mg/mL) in growth media, the cells were evaluated for cell viability using confocal microscopy. The metabolic activity of the cells was determined using an alamarBlue assay. Cell supernatants were analyzed for inflammatory cytokines. Results: Using confocal microscopy, there was no detectable change in the viability of the HCECs after exposure to the denatured lysozyme. However, using alamarBlue, a decrease in the metabolic activity of the HCECs exposed to denatured lysozyme was detected. HCECs exposed to lysozyme that was 67%, 47%, and 22% active showed a reduction in metabolic activity when compared with native (100% active) lysozyme and the media controls (P < 0.05). Exposure to the denatured lysozyme also caused an increase in the release of inflammatory cytokines (P < 0.05) from the HCECs. Conclusions: The results of this study show that denatured lysozyme can have a detrimental effect on HCECs. Both a reduction in metabolic activity and an increase in the release of inflammatory cytokines occurred after HCEC exposure to denatured lysozyme.
Subject(s)
Epithelium, Corneal/drug effects , Muramidase/pharmacology , Protein Denaturation , Cell Line , Cell Survival/drug effects , Cytokines/metabolism , Epithelium, Corneal/metabolism , Humans , Microscopy, Confocal , Muramidase/chemistry , Protein RefoldingABSTRACT
PURPOSE: To determine and compare the levels of surface versus bulk active lysozyme deposited on several commercially available hydrogel contact lens materials. METHODS: Hydrogel contact lens materials [polymacon, omafilcon A, nelfilcon A, nesofilcon A, ocufilcon and etafilcon A with polyvinylpyrrolidone (PVP)] were incubated in an artificial tear solution for 16â¯h. Total activity was determined using a standard turbidity assay. The surface activity of the deposited lysozyme was determined using a modified turbidity assay. The amount of active lysozyme present within the bulk of the lens material was calculated by determining the difference between the total and surface active lysozyme. RESULTS: The etafilcon A materials showed the highest amount of total lysozyme activity (519⯱â¯8⯵g/lens, average of Moist and Define), followed by the ocufilcon material (200⯱â¯5⯵g/lens) and these two were significantly different from each other (pâ¯<â¯0.05). The amount of surface active lysozyme on etafilcon and ocufilcon lens materials was significantly higher than that found on all other lenses (pâ¯<â¯0.05). There was no active lysozyme quantified in the bulk of the nelfilcon material, as all of the active lysozyme was found on the surface (1.7⯱â¯0.3⯵g/lens). In contrast, no active lysozyme was quantified on the surface of polymacon, with all of the active lysozyme found in the bulk of the lens material (0.6⯱â¯0.6⯵g/lens). CONCLUSIONS: The surface and bulk activity of lysozyme deposited on contact lenses is material dependent. Lysozyme deposited on ionic, high water content lens materials such as etafilcon A show significantly higher surface and bulk activity than many other hydrogel lens materials.
ABSTRACT
The purpose of this study was to investigate the early and selective uptake of lysozyme and the location of deposited lysozyme on contemporary hydrogel contact lens (CL) materials after exposure to an artificial tear solution (ATS) for 16 h. Seven different hydrogel CL materials [polymacon, omafilcon A, nelfilcon A, nesofilcon A, ocufilcon B, etafilcon A (Acuvue Moist), and etafilcon A (Acuvue Define)] were incubated in an ATS for various times. Total protein deposition was determined using a modified Bradford technique. Lysozyme, lactoferrin, and albumin deposition on CLs were determined using 125I-radiolabeling method. A confocal laser scanning microscopy (CLSM) technique was utilized to map the location of lysozyme uptake in an asymmetric environment. All lens materials had significant amounts of lysozyme after 1 min of exposure to ATS. After 16 h of incubation, higher levels of total protein deposited on the two etafilcon A-based lenses (Moist and Define), followed by ocufilcon B and both were significantly higher than all other CLs tested (p = 0.0001). The two etafilcon A materials (Moist and Define) also deposited the highest amounts of lysozyme (514.8 ± 28.4 and 527.1 ± 14.7 µg/lens respectively) when compared to other test CLs (p = 0.0001). The CLSM technique revealed that the non-ionic CLs tended to have symmetric distribution of lysozyme throughout the lens materials, while the ionic CLs had an asymmetric distribution, with the highest concentration of lysozyme on and near the exposed surface. The quantity and nature of proteins deposited on CLs varies, depending upon the chemical composition of the material. Among the various lenses tested, etafilcon A deposited the highest amount of total protein, most of it represented by lysozyme, which was largely located near the surface of the lens.
Subject(s)
Contact Lenses, Hydrophilic , Drug Carriers/chemistry , Hydrogel, Polyethylene Glycol Dimethacrylate/chemistry , Muramidase/chemistry , Muramidase/metabolism , Drug Carriers/metabolism , Protein TransportABSTRACT
Biomaterials used in the ocular environment should exhibit specific tribological behavior to avoid discomfort and stress-induced epithelial damage during blinking. In this study, two macromolecules that are commonly employed as ocular biomaterials, namely, poly(vinylpyrrolidone) (PVP) and hyaluronan (HA), are compared with two known model glycoproteins, namely bovine submaxillary mucin (BSM) and α1-acid glycoprotein (AGP), with regard to their nonfouling efficiency, wettability, and tribological properties when freely present in the lubricant, enabling spontaneous adsorption, and when chemisorbed under low contact pressures. Chemisorbed coatings were prepared by means of photochemically triggered nitrene insertion reactions. BSM and AGP provided boundary lubrication when spontaneously adsorbed in a hydrophobic contact with a coefficient of friction (CoF) of â¼0.03-0.04. PVP and HA were found to be excellent boundary lubricants when chemisorbed (CoF ≤ 0.01). Notably, high-molecular-weight PVP generated thick adlayers, typically around 14 nm, and was able to reduce the CoF below 0.005 when slid against a BSM-coated poly(dimethylsiloxane) pin in a tearlike fluid.
Subject(s)
Friction , Adsorption , Animals , Cattle , Lubricants , Lubrication , Mucins , Surface PropertiesABSTRACT
PURPOSE: To analyze quantitatively the alterations in the microvascular network of the upper tarsal conjunctiva, lid wiper, and bulbar conjunctiva relative to ocular discomfort after contact lens wear. DESIGN: A prospective, crossover clinical study. METHODS: Functional slit-lamp biomicroscopy was used to image the microvascular network of the upper tarsal conjunctiva, lid wiper, and bulbar conjunctiva. The microvascular network was automatically segmented, and fractal analyses were performed to yield the fractal dimension (Dbox) that represented vessel density. Sixteen healthy subjects (9 female and 7 male) with an average age of 35.5 ± 6.7 years (mean ± standard deviation) were recruited. The right eye was imaged at 9 AM and 3 PM at the first visit (day 1) when the subject was not wearing contact lenses. During the second visit (day 2), the right eye was fitted with a contact lens for 6 hours. Microvascular imaging was performed before (at 9 AM) and after lens wear (at 3 PM). Ocular comfort was rated using a 50-point visual analog scale before and after 6 hours of lens wear, and its relationships with microvascular parameters were analyzed. RESULTS: There were no significant differences in Dbox among the upper tarsal conjunctiva, lid wiper, and bulbar conjunctiva among the measurements at 9 AM (day 1 and day 2) and 3 PM (day 1) when the subjects were not wearing the lenses (P > .05), whereas after 6 hours of lens wear, the microvascular network densities were increased in all 3 of these locations. Dbox of the lid wiper increased from 1.411 ± 0.116 to 1.548 ± 0.079 after 6 hours of contact lens wear (P < .01). Dbox of the tarsal conjunctiva was 1.731 ± 0.026 at baseline and increased to 1.740 ± 0.030 (P < .05). Dbox of the bulbar conjunctiva increased from 1.587 ± 0.059 to 1.632 ± 0.060 (P < .001). The decrease in ocular discomfort was strongly related to the Dbox change in the lid wiper (r = 0.61, P < .05). There were no correlations between the changes of ocular comfort and the microvascular network densities of either the tarsal or bulbar conjunctivas (P > .05). CONCLUSIONS: This study is the first to show that the microvascular network of the lid wiper can be quantitatively analyzed in contact lens wearers. The microvascular responses of the lid wiper were significantly correlated with contact lens discomfort.