Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate.

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

Scalable and Consolidated Microbial Platform for Rare Earth Element Leaching and Recovery from Waste Sources.

Chemical methods for the extraction and refinement of technologically critical rare earth elements (REEs) are energy-intensive, hazardous, and environmentally destructive. Current biobased extraction systems rely on extremophilic organisms and generate many of the same detrimental effects as chemical methodologies. The mesophilic methylotrophic bacterium Methylobacterium extorquens AM1 was previously shown to grow using electronic waste by naturally acquiring REEs to power methanol metabolism. Here we show that growth using electronic waste as a sole REE source is scalable up to 10 L with consistent metal yields without the use of harsh acids or high temperatures. The addition of organic acids increases REE leaching in a nonspecific manner. REE-specific bioleaching can be engineered through the overproduction of REE-binding ligands (called lanthanophores) and pyrroloquinoline quinone. REE bioaccumulation increases with the leachate concentration and is highly specific. REEs are stored intracellularly in polyphosphate granules, and genetic engineering to eliminate exopolyphosphatase activity increases metal accumulation, confirming the link between phosphate metabolism and biological REE use. Finally, we report the innate ability of M. extorquens to grow using other complex REE sources, including pulverized smartphones, demonstrating the flexibility and potential for use as a recovery platform for these critical metals.

A density functional theory study on the mechanism of toluene from dimethylcyclopentane catalyzed by the [GaH]2+ active site of Ga-ZSM-5.

The ONIOM (ωb97xd/6-31G(d,p):pm6) method was used to study the reaction mechanism of dimethylcyclopentane to toluene by the [GaH]2+ active site of Ga-ZSM-5. The results showed that the rate-determining step in the dimethylcyclopentane aromatization process is the ring expansion process. Compared to those of methylcyclopentane to benzene (D. D. Zhang, H. Y. Liu, L. X. Ling, H. R. Zhang, R. G. Zhang, P. Liu and B. J. Wang, Phys. Chem. Chem. Phys., 2021, 23, 10988-11003.), the free energy barriers of dimethylcyclopentane to toluene are significantly decreased, indicating that toluene is easier to produce than benzene, which confirmed the experimental results that a higher proportion of toluene than benzene is produced in the MTA process.

Constructing extrinsic oxygen vacancy on the surface of photocatalyst as CO2 and electrons reservoirs to improve photocatalytic CO2 reduction activity.

Constructing own oxygen vacancies in the photocatalysts is a very promising method to improve their photocatalytic CO2 reduction activity. However, some catalysts have excellent stabilities, making it difficult for them to construct their own oxygen vacancies. To simplify the above difficulty of stable photocatalysts, constructing extrinsic oxygen vacancies on their surface as a novel idea is proposed. Here, a stable TiO2 nanosheet is chosen as a research object, we uniformly deposited BiOCl quantum dots on their surface via a simple adsorption-deposition method. It is found that BiOCl quantum dots are able to simultaneously self-transform into defective BiOCl with many oxygen vacancies when the photocatalyst is performed photocatalytic CO2 reduction. These extrinsic oxygen vacancies can act as "CO2 and photo-generated electrons reservoirs" to improve CO2 capture and accelerate the separation of photogenerated electrons and holes. For the above reasons, the modified TiO2 showed obvious enhancement of photocatalytic CO2 reduction compared to pristine TiO2 and BiOCl. This work may open a new avenue to broaden the use of oxygen vacancies in the process of photocatalytic CO2 reduction.

Boosting Low-Temperature CO2 Hydrogenation over Ni-based Catalysts by Tuning Strong Metal-Support Interactions.

Rational design of low-cost and efficient transition-metal catalysts for low-temperature CO2 activation is significant and poses great challenges. Herein, a strategy via regulating the local electron density of active sites is developed to boost CO2 methanation that normally requires >350 °C for commercial Ni catalysts. An optimal Ni/ZrO2 catalyst affords an excellent low-temperature performance hitherto, with a CO2 conversion of 84.0 %, CH4 selectivity of 98.6 % even at 230 °C and GHSV of 12,000 mL g-1 h-1 for 106 h, reflecting one of the best CO2 methanation performance to date on Ni-based catalysts. Combined a series of in situ spectroscopic characterization studies reveal that re-constructing monoclinic-ZrO2 supported Ni species with abundant oxygen vacancies can facilitate CO2 activation, owing to the enhanced local electron density of Ni induced by the strong metal-support interactions. These findings might be of great aid for construction of robust catalysts with an enhanced performance for CO2 emission abatement and beyond.

Constructing High-Performance Cobalt-Based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors.

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Što 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Mesoporous MgO enriched in Lewis base sites as effective catalysts for efficient CO2 capture.

Capturing CO2 has become increasingly important. However, wide industrial applications of conventional CO2 capture technologies are limited by their slow CO2 sorption and desorption kinetics. Accordingly, this research is designed to overcome the challenge by synthesizing mesoporous MgO nanoparticles (MgO-NPs) with a new method that uses PEG 1500 as a soft template. MgO surface structure is nonstoichiometric due to its distinctive shape; the abundant Lewis base sites provided by oxygen vacancies promote CO2 capture. Adding 2 wt % MgO-NPs to 20 wt % monoethanolamine (MEA) can increase the breakthrough time (the time with 90% CO2 capturing efficiency) by ∼3000% and can increase the CO2 absorption capacity within the breakthrough time by ∼3660%. The data suggest that MgO-NPs can accelerate the rate and increase CO2 desorption capacity by up to ∼8740% and ∼2290% at 90 °C, respectively. Also, the excellent stability of the system within 50 cycles is verified. These findings demonstrate a new strategy to innovate MEA absorbents currently widely used in commercial post-combustion CO2 capture plants.

Visible-light-induced photocatalytic CO2 reduction over zirconium metal organic frameworks modified with different functional groups.

The reduction of CO2 into high value-added chemicals and fuels by a photocatalytic technology can relieve energy shortages and the environmental problems caused by greenhouse effects. In the current work, an amino-functionalized zirconium metal organic framework (Zr-MOF) was covalently modified with different functional groups via the condensation of Zr-MOF with 2-pyridinecarboxaldehyde (PA), salicylaldehyde (SA), benzaldehyde (BA), and trifluoroacetic acid (TA), named Zr-MOF-X (X = PA, SA, BA, and TA), respectively, through the post-synthesis modification. Compared with Zr-MOF and Zr-MOF-TA, the introduction of PA, SA, or BA into the framework of Zr-MOF can not only enhance the visible-light harvesting and CO2 capture, but also accelerate the photogenerated charge separation and transfer, thereby improving the photocatalytic ability of Zr-MOF for CO2 reduction. These results indicate that the modification of Zr-MOF with electron-donating groups can promote the photocatalytic CO2 reduction. Therefore, the current work provides an instructive approach to improve the photocatalytic efficiency of CO2 reduction through the covalent modification of MOFs.

Core-Shell Covalently Linked Graphitic Carbon Nitride-Melamine-Resorcinol-Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO2 Reduction to Methanol.

Photocatalytic reduction of CO2 with light and H2O to form CH3OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmentally unfriendly toxic metals limit their applicability. Here, we report metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C3N4, CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Covalent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt % CN, a CH3OH yield of 0.99 µmol·h-1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with X-ray photoelectron spectroscopy, transmission electron microscopy, and bulk and surface elemental analyses supported the formation of a core-shell structure and the charge transfer in the C-N bond at the CN-MRF interface between the methoxy group in the 2,4-dihydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of the photo-excited internal charge transferred from CN to the hydroxymethylamino group in MRF, whose amino group was the catalytic site for the CO2 photocatalytic reduction to CH3OH. This study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response.

QSAR model and mechanism research on color removal efficiency of dying wastewater by FeCl3 coagulation.

Coagulation is the most widely used method in the treatment of printing and dying wastewater. To better understand the relationship between the coagulation effect and dye molecular structures, quantitative structure activity relationship (QSAR) analyses were performed to elucidate the factors affecting the coagulation in ferric chloride (FeCl3) coagulation process. First, the coagulation experiments on 38 dye molecules were conducted to determine their color removal rates (Rexp) by FeCl3 under different pH conditions (i.e., pH = 4 and 10). The results showed that the average Rexp of dyes were 41.36% ± 2.40% at pH value of 4 and 55.70% ± 2.83% at pH value of 10. Subsequently, a multiple linear regression (MLR) method was used to construct QSAR models based on Rexp and 42 molecular parameters calculated by Gaussian 09, Materials Studio 7.0 and Multiwfn. The developed QSAR models exhibited excellent stability, reliability, and robustness with values of R2 = 0.7950, 0.8170, Q2INT = 0.6401, 0.7382, Q2EXT = 0.5168, 0.5441, at pH values of 4 and 10, respectively. Through analysis of quantum parameter values, electrostatic adsorption and hydrogen bonding adsorption were primarily responsible for the coagulation process. Therefore, this study could be useful in providing critical information for evaluating the removal efficiency and a feasible way to predict the removal rate of dyes by FeCl3 when no coagulation experiments were conducted.

Theoretical DFT Study on the Mechanisms of CO/CO2 Conversion in Chemical Looping Catalyzed by Calcium Ferrite.

The CO/CO2 conversion mechanism on the calcium ferrite (CFO) surface in chemical looping was explored by a computational study using the density functional theory approach. The CFO catalytic reaction pathway of 2CO + O2 → 2CO2 conversion has been elucidated. Our results show that the Fe center in CFO plays the key role as a catalyst in the CO/CO2 conversion. Two energetically stable spin states of CFO, quintet and septet, serve as the effective catalysts. The presence of the triplet O2 molecule caused the conversion of these two spin-state structures into each other along the catalytic reaction pathway. A double release of CO2 was predicted following this reaction mechanism. The rate-determining step is the formation of the 2CO2-CFO complex (P4) in the quintet state (19.0 kcal/mol). The predicted energy barriers for all the steps suggest that the proposed pathway is plausible.

Application of percarbonate and peroxymonocarbonate in decontamination technologies.

Sodium percarbonate (SPC) and peroxymonocarbonate (PMC) have been widely used in modified Fenton reactions because of their multiple superior features, such as a wide pH range and environmental friendliness. This broad review is intended to provide the fundamental information, status and progress of SPC and PMC based decontamination technologies according to the peer-reviewed papers in the last two decades. Both SPC and PMC can directly decompose various pollutants. The degradation efficiency will be enhanced and the target contaminants will be expanded after the activation of SPC and PMC. The most commonly used catalysts for SPC activation are iron compounds while cobalt compositions are applied to activate PMC in homogenous and heterogeneous catalytical systems. The generation and participation of hydroxyl, superoxide and/or carbonate radicals are involved in the activated SPC and PMC system. The reductive radicals, such as carbon dioxide and hydroxyethyl radicals, can be generated when formic acid or methanol is added in the Fe(II)/SPC system, which can reduce target contaminants. SPC can also be activated by energy, tetraacetylethylenediamine, ozone and buffered alkaline to generate different reactive radicals for pollutant decomposition. The SPC and activated SPC have been assessed for application in-situ chemical oxidation and sludge dewatering treatment. The challenges and prospects of SPC and PMC based decontamination technologies are also addressed in the last section.

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst.

Direct synthesis of dimethyl ether (DME) by CO2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods: co-precipitation, sol-gel, and solid grinding to produce mixed Cu, ZnO, ZrO2 catalysts that were physically mixed with a commercial ferrierite (FER) zeolite. The catalysts were characterized by N2 physisorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption of CO2 (CO2-TPD), temperature programmed desorption of NH3 (NH3-TPD), and temperature programmed H2 reduction (H2-TPR). The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases, higher surface area, and lower reduction temperature are all favorable for catalytic activity. The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Methanol appears to be formed via the bidentate-formate (b-HCOO) species undergoing stepwise hydrogenation, while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.

Evaluation of natural goethite on the removal of arsenate and selenite from water.

Elevated arsenic and selenium concentrations in water cause health problems to both humans and wildlife. Natural and anthropogenic activities have caused contamination of these elements in waters worldwide, making the development of efficient cost-effective methods in their removal essential. In this work, removal of arsenate and selenite from water by adsorption onto a natural goethite (α-FeOOH) sample was studied at varying conditions. The data was then compared with other arsenate, selenite/goethite adsorption systems as much of literature shows discrepancies due to varying adsorption conditions. Characterization of the goethite was completed using inductively coupled plasma mass spectrometry, X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller surface area analysis. Pseudo-first order (PFO) and pseudo-second order (PSO) kinetic models were applied; including comparisons of different regression methods. Various adsorption isotherm models were applied to determine the best fitting model and to compare adsorption capacitates with other works. Desorption/leaching of arsenate and selenite was studied though the addition of phosphate and hydroxyl ions. Langmuir isotherm modeling resulted in maximum adsorption capacities of 6.204 and 7.740 mg/g for arsenate and selenite adsorption, respectively. The PSO model applied with a non-linear regression resulted in the best kinetic fits for both adsorption and desorption of arsenate and selenite. Adsorption decreased with increasing pH. Phosphate induced desorption resulted in the highest percentage of arsenate and selenite desorbed, while hydroxide induced resulted in the fastest desorption kinetics.

Thermodynamics of NaHCO3 decomposition during Na2CO3-based CO2 capture.

Amine-basedcarbon-capture technologies have been shown to be energetically expensive and to cause significant environmental and epidemiological impacts due to their volatility. Bicarbonate formation from carbon dioxide's reaction with water has been suggested as an effective alternative for capturing CO2; however, the thermodynamics of this reaction are not well understood. This study experimentally determined the equilibrium constant of sodium bicarbonate (NaHCO3) decomposition to sodium, water, and carbon dioxide; the study also compared the equilibrium constant to theoretical calculations. Using a combination of experimentation and thermodynamic relationships, the unitless equilibrium constants of the forward and reverse reactions were calculated accurately (error <±9% and <±4%, respectively). Equilibrium data were calculated using enthalpy and entropy values of each component of NaHCO3 decomposition at temperatures ranging from 25 to 155°C respectively. These results offer more data essential to optimizing NaHCO3 use in environmentally friendly next-generation CO2-capture technologies.

Application of mass spectrometry in the characterization of chemicals in coal-derived liquids.

Coal-derived liquids (CDLs) are primarily generated from pyrolysis, carbonization, gasification, direct liquefaction, low-temperature extraction, thermal dissolution, and mild oxidation. CDLs are important feedstocks for producing value-added chemicals and clean liquid fuels as well as high performance carbon materials. Accordingly, the compositional characterization of chemicals in CDLs at the molecular level with advanced analytical techniques is significant for the efficient utilization of CDLs. Although reviews on advancements have been rarely reported, great progress has been achieved in this area by using gas chromatography/mass spectrometry (GC/MS), two-dimensional GC-time of flight mass spectrometry (GC × GC-TOFMS), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). This review focuses on characterizing hydrocarbon, oxygen-containing, nitrogen-containing, sulfur-containing, and halogen-containing chemicals in various CDLs with these three mass spectrometry techniques. Small molecular (< 500 u), volatile and semi-volatile, and less polar chemicals in CDLs have been identified with GC/MS and GC × GC-TOFMS. By equipped with two-dimensional GC, GC × GC-TOFMS can achieve a clearly chromatographic separation of complex chemicals in CDLs without prior fractionation, and thus can overcome the disadvantages of co-elution and serious peak overlap in GC/MS analysis, providing much more compositional information. With ultrahigh resolving power and mass accuracy, FT-ICR MS reveals a huge number of compositionally distinct compounds assigned to various chemical classes in CDLs. It shows excellent performance in resolving and characterizing higher-molecular, less volatile, and polar chemicals that cannot be detected by GC/MS and GC × GC-TOFMS. The application of GC × GC-TOFMS and FT-ICR MS to chemical characterization of CDLs is not as prevalent as that of petroleum and largely remains to be developed in many respects. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 36:543-579, 2017.

CO oxidative coupling to dimethyl oxalate over Pd-Me (Me = Cu, Al) catalysts: a combined DFT and kinetic study.

CO oxidative coupling to dimethyl oxalate (DMO) on Pd(111), Pd-Cu(111) and Pd-Al(111) surfaces was systematically investigated by means of density functional theory (DFT) together with periodic slab models and micro-kinetic modeling. The binding energy results show that Cu and Al can be fine substrates to stably support Pd. The favorable pathway for DMO synthesis on these catalysts starts from the formation of two COOCH3 intermediates, followed by the coupling to each other, and the catalytic activity follows the trend of Pd-Al(111) > Pd(111) > Pd-Cu(111). Additionally, the formation of DMO is far favorable than that of dimethyl carbonate (DMC) on these catalysts. The results were further demonstrated by micro-kinetic modeling. Therefore, Pd-Al bimetallic catalysts can be applied in practice to effectively enhance the catalytic performance and greatly reduce the cost. This study can help with fine-tuning and designing of high-efficient and low-cost Pd-based bimetallic catalysts.

Application of Ag/AgBr/GdVO4 composite photocatalyst in wastewater treatment.

Ag/AgBr/GdVO4 composite photocatalysts were designed and synthesized in this paper. The physical and chemical structures, as well as optical properties of the synthesized composite were investigated via XRD, XPS, TEM, and UV-vis. It is found that the composite showed a ternary heterojunction structure of Ag, AgBr and GdVO4. Meanwhile, it has a high intensity of light current, indicating its high separation efficiency of electron and hole. Photocatalytic oxidation of rhodamine B (RhB) under visible light irradiation was performed to investigate the activity of the Ag/AgBr/GdVO4 composite. Result indicates that it shows excellent photocatalytic activity. Under visible light irradiation for 12min, about 80% of RhB (30µmol/L) was degraded. The degradation rate is estimated to be 0.253 min-1, which is three times higher than that of pure AgBr. The high photoactivity can be ascribed to the synergetic effect of AgBr, GdVO4, and Ag nanoparticle in separation of electron-hole pairs.

Synthesis of methanol from CO2 hydrogenation promoted by dissociative adsorption of hydrogen on a Ga3Ni5(221) surface.

Catalytic carbon dioxide (CO2) hydrogenation to liquid fuels including methanol (CH3OH) has attracted great attention in recent years. In this work, density functional theory (DFT) calculations have been employed to study the reaction mechanisms of CO2 hydrogenation to CH3OH on Ga3Ni5(221) surfaces. The results show that all intermediates except for the O atom prefer to adsorb on Ni sites, and dissociative adsorption of hydrogen (H2) on the Ga3Ni5(221) surface is almost barrierless and highly exothermic, favoring CO2 hydrogenation. Moreover, the presence of Ga indeed enhances the dissociative adsorption of H2, and this is verified by the projected density of states (PDOS) analysis. Importantly, three possible reaction pathways based on formate (HCOO) and hydrocarboxyl (COOH) formations and reverse water gas shift (rWGS) with carbon monoxide (CO) hydrogenation have been discussed. It is found that CO2 reduction to CH3OH in these pathways prefers to occur entirely via the Langmuir-Hinshelwood (L-H) mechanism. COOH generation is the most favorable pathway because the HCOO and rWGS with CO hydrogenation pathways have high energy barriers and the resulting HCOOH intermediate in the HCOO pathway is unstable. In the COOH reaction pathway, CO2 is firstly hydrogenated to trans-COOH, followed by the formation of COH via three isomers of COHOH, its hydrogenation to trans-HCOH, and then the production of CH3OH via a CH2OH intermediate.