ABSTRACT
LiNi0.8Mn0.1Co0.1O2 with high nickel content plays a critical role in enabling lithium metal batteries (LMBs) to achieve high specific energy density, making them a prominent choice for electric vehicles (EVs). However, ensuring the long-term cycling stability of the cathode electrolyte interfaces (CEIs), particularly at fast-charge conditions, remains an unsolved challenge. The decay mechanism associated with CEIs and electrolytes in LMB at high current densities is still not fully understood. To address this issue, in situ Fourier transform infrared (FTIR) is employed to observe the dynamic process of formation/disappearance/regeneration of CEIs during charge and discharge cycles. These dynamic processes further exacerbate the instability of CEIs as current density increases, leading to rupture and dissolution of CEIs and subsequent deterioration in battery performance because of continuous electrolyte reactions. Additionally, the dynamic changes occurring within individual components of CEIs at different cycling stages and various current densities are also discussed. The results demonstrate that excellent capacity retention at small current density is attributed to enrichment of inorganic compounds (Li2CO3, LiF, etc.) and rendering better stability and smaller expansion of CEIs. The key to achieving excellent electrochemical performance at high current densities lies on protecting CEIs, mainly inorganic components.
ABSTRACT
MnCo2O4 is regarded as a good electrode material for supercapacitor due to its high specific capacity and good structural stability. However, its poor electrical conductivity limits its wide-range applications. To solve this issue, we integrated the MnCo2O4 with Ni3S4, which has a good electrical conductivity, and synthesized a MnCo2O4/Ni3S4 nanocomposite using a two-step hydrothermal process. Comparing with individual MnCo2O4 and Ni3S4, the MnCo2O4/Ni3S4 nanocomposite showed a higher specific capacity and a better cycling stability as the electrode for the supercapacitor. The specific capacity value of the MnCo2O4/Ni3S4 electrode was 904.7 C g-1 at 1 A g-1 with a potential window of 0-0.55 V. A hybrid supercapacitor (HSC), assembled using MnCo2O4/Ni3S4 and active carbon as the cathode and anode, respectively, showed a capacitance of 116.4 F g-1 at 1 A g-1, and a high energy density of 50.7 Wh kg-1 at 405.8 W kg-1. Long-term electrochemical stability tests showed an obvious increase of the HSC's capacitance after 5500 charge/discharge cycles, reached a maximum value of â¼162.7% of its initial value after 25,000 cycles, and then remained a stable value up to 64,000 cycles. Simultaneously, its energy density was increased to 54.2 Wh kg-1 at 380.3 W kg-1 after 64,000 cycles.