Biochar from co-pyrolysis of biological sludge and sawdust in comparison with the conventional filling media of vertical-flow constructed wetlands for the treatment of domestic-textile wastewater.

A biochar from co-pyrolysis of a mixture of sawdust and biological sludge (70/30, w/w), providing a high environmental compatibility in terms of water leachable polycyclic aromatic hydrocarbons and inorganic elements, together with a remarkable surface area (389 m2/g), was integrated into laboratory-scale vertical-flow constructed wetlands (VF-CWs), planted with Phragmites australis and unplanted. Biochar-filled VF-CWs have been tested for 8 months for the refining of effluents from the tertiary clariflocculation stage of a wastewater treatment plant operating in a mixed domestic-industrial textile context, in comparison with systems filled with gravel. VF-CW influents and effluents were monitored for chemical oxygen demand (COD), nitrogen and phosphorus cycles, and absorbance values at 254 and 420 nm, the latter as rapid and reliable screening parameters of the removal of organic micropollutants containing aromatic moieties and/or chromophores. Biochar-based systems provided a statistically significant improvement in COD (Δ = 22%) and ammonia (Δ = 35%) removal, as well as in the reduction of UV-Vis absorbance values (Δ = 32-34% and Δ = 28% for 254 and 420 nm, respectively), compared to gravel-filled microcosms. The higher removal of organic was mainly attributed to the well-known adsorption properties of biochars, while for nitrogen the biological mechanisms seem to play a predominant role.

Productivity and nutritional and nutraceutical value of strawberry fruits (Fragaria x ananassa Duch.) cultivated under irrigation with treated wastewaters.

BACKGROUND: Agriculture represents a productive sector typically characterized by a high water demand, whereas freshwater (FW) availability is a problem of increasing concern in the world and FW resources are becoming insufficient for sustaining agricultural irrigation. The reuse of treated wastewaters (TWWs) for crop irrigation could be an efficient tool for reducing water shortage. Hence, the present study evaluated the food quality of Fragaria x ananassa (cultivar Camarosa) fruits irrigated with four types of treated wastewaters (TWWs). Strawberries were analysed for yield, sucrose, fructose, glucose, total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and antiradical and antioxidant capacity. In addition, a targeted quantification of the most representative phenolic compounds of strawberry was performed. RESULTS: TWWs complied the Italian ministerial decree 185/2003 for wastewater reuse, with very few exceptions, mainly represented by chloride concentrations (258-643 mg L-1 versus a legal threshold of 250 mg L-1 ). The reuse of TWWs reduced fruit yield (10-26%) compared to irrigation with tap water as a control. Irrigation with TWWs gave also rise to the decrease of total sugars (14-26%), TSP (2-10%) and TMA (29-49%). Individual phenolic acids, flavonols and flavanols were quite stable in response to the irrigation with TWWs, whereas anthocyanidins decreased significantly. CONCLUSION: Although TWWs negatively affected fruit quality, the nutritional and nutraceutical parameters determined in the present study were in line with data previously reported for strawberries purchased in the market or cultivated in research orchards, thus suggesting that the use of TWWs does not prevent the fruit marketability. © 2020 Society of Chemical Industry.

Optimization of a large industrial wastewater treatment plant using a modeling approach: A case study.

The objective of this paper is to find the optimum solid retention time (SRT) of a wastewater treatment plant (WWTP), which minimizes operating costs, using a modeling approach with WEST software by MIKE DHI®. For the determination of the kinetic and stoichiometric parameters (used for the correct calibration of the model implemented), respirometric and kinetic batch tests were carried out. Each Oxidation ditch was modeled by a sequence of four aerated activated sludge units (ASUs) and four anoxic ASUs with recirculation. The model is able to simulate the separation efficiency of the secondary settler, which is generally quite low: in fact, the industrial origin of the wastewater induces the formation of small flocs, the dimensions of which can be further reduced by the presence of surface aerators. The nitrification/denitrification process is also accurately predicted. Using data obtained from the model, mass balances at the steady state for COD and N were made and compared to the ones obtained using measured data. After calibration and validation of the model, steady-state simulations were carried out by increasing and decreasing the SRT of the system under two different operational conditions used by the managing company and by evaluating the costs related to the water treatment line and the sludge treatment line for each scenario. It is interesting to note how the total costs are lower in summer than in winter (7.2 €cent/m3 in summer and 8.7 €cent/m3 in winter, in scenario 0). In general, the increase in the SRT led to a decrease in the total management costs. In fact, differences between scenario 0 and the scenario with the lowest total treatment costs (corresponding to an SRT of 11.4 d in winter and 10.0 d in summer) could give rise to total savings of about 44·000€/year in summer and 93·000€/year in winter.

Design and start-up of a constructed wetland as tertiary treatment for landfill leachates.

In this paper, the design and start-up of a constructed wetland (CW) for the tertiary treatment of landfill leachates is presented. The flux is characterized by high salinity, high concentration of nitrogen (almost completely in the form of nitrate) and a biochemical oxygen demand (BOD)/chemical oxygen demand (COD) ratio close to zero. The CW pilot plant suffered from mechanical and hydraulic malfunctions which led to an uneven growth of plants inside the tanks. Despite this, COD has been reduced in the range of 0-30%, reduced forms of N (ammonia and nitrite) are also oxidized and removed by 50-80% and 20-26% on average. Considering the low number of plants and the loading rate, CW pilot plant allowed to remove more than 16 kg of COD, leading to a specific removal of 10 gCOD/d · m2. Moreover, bacterial communities associated to plants were isolated and analyzed in order to evaluate the influence of such communities on phytoremediation. Bulk soil registered the lowest bacterial titers, while plant compartments and rhizospheric soil showed to be more suitable for bacterial colonization. Twenty-five different bacterial genera were observed among the analyzed isolates, with the predominance of Pseudomonas genus.

Fully automated on-line solid phase extraction coupled to liquid chromatography-tandem mass spectrometry for the simultaneous analysis of alkylphenol polyethoxylates and their carboxylic and phenolic metabolites in wastewater samples.

Three different sorbents (i.e. endcapped octadecylsilane, octasilane and styrene-N-vinylpiperidinone co-polymer) were investigated in order to develop an on-line solid phase extraction-liquid chromatographic tandem mass spectrometric method (on-line SPE-LC-MS/MS) for the simultaneous analysis of alkylphenols polyethoxylate (AP(n)EOs, n = 1-8) and corresponding monocarboxylate (AP1ECs) and phenolic (APs) metabolites. The endcapped octadecylsilane was selected due to its full compatibility with a chromatographic approach, which allowed the elution of positively and negatively ionisable compounds in two distinct retention time windows, using a water-acetonitrile-tetrahydrofuran ternary gradient and a pellicular pentafluorophenyl column. On this SPE sorbent, the composition of the loading/clean-up solution was then optimized in order to achieve the best recoveries of target analytes. Under the best experimental conditions, the total analysis time per sample was 25 min and method detection limits (MDLs) were in the sub-nanograms per litre to nanograms per litre range (0.0081-1.0 ng L(-1)) for AP(n)EOs with n = 2-8, AP1ECs and APs, whereas for AP1EOs, an MDL of about 50 ng L(-1) was found. Using the mass-labelled compound spiking technique, the method performance was tested on inlet and outlet wastewater samples from three activated sludge treatment plants managing domestic and industrial sewages of the urban areas and the textile district of Prato and Bisenzio valley (Tuscany, Italy); in most cases, apparent recovery percentages approximately in the ranges of 50-110% and 80-120% were found for inlet and outlet samples, respectively. The on-line SPE-LC-MS/MS analysis of wastewater samples highlighted the presence of target analytes at concentrations ranging from few nanograms per litre to thousands nanograms per litre, depending on the compound and matrix analysed. AP2ECs were also tentatively identified in outlet samples.

Nanotechnologies for Removal of Pharmaceuticals and Personal Care Products from Water and Wastewater. A Review.

The occurrence of pharmaceuticals and other hazardous substances in surface waters and drinking water and the long-term exposure may represent a potential risk for both the environment and human health. Many studies have evidenced that conventional technologies used for wastewater treatment do not completely remove pharmaceuticals and personal care products (PPCPs) residues, which can be detected in receiving waters at concentrations ranging from few ng L(-1) until more than µg L(-1). Nanomaterials are of fundamental importance in the current research efforts to develop more efficient water treatment and remediation systems in place of conventional technologies. This review provides a comprehensive overview of the most relevant works available in literature reporting the use of nanosorbents (nanotubes and zeolites), nanofiltration (NF) and advanced oxidation processes (AOPs) for the removal of PPCPs compounds from water and wastewater. The literature review of laboratory- and pilot-scale studies have shown that nanomaterials are promising tools in environmental cleaning processes and water purification, even if more researches are necessary.

Revamping of a Full-Scale Membrane Plant for Landfill Leachate Pretreatment Using Partial Nitritation.

This paper describes a case study involving a revamping of a full-scale membrane bioreactor that treats landfill leachate and other liquid wastes. The main change was the introduction of nitritation/denitritation in alternating cycles instead of the classic denitrification/nitrification process, together with the installation of fine bubble diffusers, a reduction in the volume of the biological compartment, and an increase in the equalization volume. The most significant results were obtained for the biological compartment, with a decrease in the specific energy consumption of 46.6%. At the same time, the removal efficiency of COD, BOD, and TN substantially remained the same before and after plant revamping, while the removal efficiency of TP increased over the years, reaching an average value of almost 71%. Regarding the ultrafiltration unit, the specific flux (or permeability) was characterized by an increasing trend. At the same time, the specific energy consumption of this section decreased by 9.4%. These results led to the conclusion that the changes introduced with the revamp led to a more stable process, a reduction in membrane fouling, and important energy savings.

Biochar from co-pyrolysis of biological sludge and woody waste followed by chemical and thermal activation: end-of-waste procedure for sludge management and biochar sorption efficiency for anionic and cationic dyes.

Nine biochars were produced by co-pyrolysis of sawdust and biological sludge following the "design of experiment" approach. Two kinds of sludge (both deriving from the treatment of mixed industrial-municipal wastewater) and two types of woody waste were selected as categorical predicting variables, while contact time, pyrolysis temperature, and sludge percentage were used as quantitative variables. Biochars were analysed for their product characteristics and environmental compatibility based on the European Standards (EN 12915-1:2009) for materials intended for water treatment (i.e. ash content, water leachable polycyclic aromatic hydrocarbons (PAHs) and elements), as well as for specific surface area (SSA), using them as response variables of a multivariate partial least square multiple regression, whose results provided interesting insights on the relationships between pyrolysis conditions and biochar characteristics. Biochars produced with sludge and/or providing the highest SSA values (258-370 m2 g-1) were selected to undergo a sustainable chemical treatment using a by-product of the gasification of woody biomass, complying in all cases with European Standards and achieving therefore the end-of-waste status for sewage sludge. The biochar deriving from the highest percentage of sludge (30% by weight) and with the highest SSA (390 m2 g-1) was thermally activated achieving SSA of 460 m2 g-1 and then tested for the sorption of direct yellow 50 and methylene blue in ultrapure water and real wastewater, compared to a commercial activated carbon (AC). The biochar showed Langmuir sorption maxima (Qm) 2-9 times lower than AC, thus highlighting promising sorption performances. Qm for methylene blue in wastewater (28 mg‧g-1) was confirmed by column breakthrough experiments.

Effect of Wastewater on the Composition of Bacterial Microbiota of Phragmites australis Used in Constructed Wetlands for Phytodepuration.

Phytodepuration occurs in the plant-mediated remediation processes exploited to remove pollutants from wastewater, and Phragmites australis is one of the most used plants. This goal is achieved using constructed wetlands (CW), which are engineered systems designed to mimic the natural processes of pollutants removal. The aim of this work was to characterize the bacterial communities associated to P. australis, soils, and permeates of the CW of Calice (Prato, Italy), to evaluate the possible effect of wastewaters on the CW bacterial communities, through a next-generation sequencing-based approach. A total of 122 samples were collected from different tissues of P. australis (i.e., roots, aerial parts, and stem), soil (i.e., rhizospheric and bulk soil), and permeates, and analyzed. All samples were collected during five sampling campaigns, with the first one performed before the activation of the plant. Obtained results highlighted a specific microbiota of P. australis, conserved among the different plant tissues and during time, showing a lower alpha diversity than the other samples and not influenced by the more complex and variable environmental (soils and permeates) bacterial communities. These data suggest that P. australis is able to select and maintain a defined microbiota, a capacity that could allow the plant to survive in hostile environments, such as that of CW.

Closing the loop in a constructed wetland for the improvement of metal removal: the use of Phragmites australis biomass harvested from the system as biosorbent.

Among the numerous clean-up techniques for water treatment, sorption methods are widely used for the removal of trace metals. Phragmites australis is a macrophyte commonly used in constructed wetlands for water purification, and in the last decades, its use as biosorbent has attracted increasing attention. In view of a circularly economy approach, this study investigated improvement of trace metal removal by recycling the biomass of P. australis colonizing a constructed wetland, which operates as post-treatment of effluent wastewater from an activated sludge plant serving the textile industrial district of Prato (Italy). After the annual mowing of the reed plants, the biomass was dried and blended to derive a sustainable and eco-friendly biosorbent and its sorption capacity for Fe, Cu, and Zn was investigated comparing the batch system with the easier-to-handle column technique. The possibility of regeneration and reuse of the biosorbent was also evaluated. The biomaterial showed an interesting sorption capacity for Cu, Fe, and Zn, both in batch and in column experiments, especially for Fe ions. The immobilization of the biosorbent in column filters induced some improvement in the removal efficiency, and, in addition, this operation mode has the advantage of being much more suitable for practical applications than the batch process.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection.

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time. Statistically significant models were obtained in most cases with fitting and cross-validation coefficients in the ranges of 0.681-0.998 and 0.514-0.967, respectively. After optimization, the analysis of target analytes was performed in a single chromatographic run, adopting a mixed acquisition mode based on scheduled acquisition windows comprising both single polarity and continuous polarity switching. For most investigated analytes the method provided detection limits in the sub-ng/L to low ng/L range, meeting for macrolides the sensitivity requested by the "Watch List" 2018/840/EU. The optimized method was applied to the direct injection analysis of PhCs and TPs in four wastewater treatment plant (WWTP) effluents and surface water (SW) samples collected in the receiving water bodies. Absolute values of matrix effect were found to be far higher than 20% for most target analytes in most samples. Seventeen PhCs and two TPs were quantified in at least one sample, at the wide concentration range of about 1-3200 ng/L. The most occurring PhCs in both WWTP effluents and SWs were levofloxacin (202-1239 and 100-830 ng/L), furosemide (865-3234 and 230-880 ng/L), ketoprofen (295-1104 and 270-490 ng/L), and ibuprofen (886-3232 and 690-1440 ng/L).

Antibacterial activity of bacteria isolated from Phragmites australis against multidrug-resistant human pathogens.

Background: Rising number of multidrug-resistant human pathogens demands novel antibiotics: to this aim, unexplored natural sources are investigated to find new compounds. In this context, bacteria associated to medicinal plants, including Phragmites australis, might represent an important source of antimicrobial compounds. Materials & methods: In the present work, 21 bacterial endophytes isolated from P. australis roots were tested, by cross-streaking, for their inhibitory activity against 36 multidrug-resistant pathogens isolated from food, clinical patients and hospitals. Results & conclusion: Seven endophytes, belonging to Pseudomonas and Stenotrophomonas, were able to inhibit the growth of most of the target strains. In conclusion, this preliminary work could pave the way for the discovery of new antibiotics against superbugs.

Lay abstract In the present work, 21 bacteria associated to Phragmites australis roots were tested for their inhibitory activity against 36 human pathogens isolated from food, clinical patients and/or hospitals, which have the ability to escape several commonly used antibiotics. Seven out of 21 bacteria associated to P. australis were able to inhibit the growth of most of target pathogens. This preliminary work could pave the way to the discovery of new antimicrobial compounds active against bacterial pathogens that cannot be killed using several antibiotics.

Improving the efficiency of wastewater treatment plants: Bio-removal of heavy-metals and pharmaceuticals by Azolla filiculoides and Lemna minuta.

In this study, we investigated the removal of Fe(III), Cr(VI), Al(III), diclofenac, and levofloxacin from treated wastewater in the presence of the free-floating plants Azolla filiculoides and Lemna minuta, to understand whether these species can be effectively used in a surface flow constructed wetland as wastewater refining treatment. Fe and Al were selected owing to their wide use as coagulant agents in wastewater treatment plants for promoting clariflocculation processes, whilst Cr was chosen due to its common use in industry. Diclofenac and levofloxacin, two molecules belonging to the most widely used pharmaceutical classes in the world, were studied as representative anti-inflammatory drugs and antibiotics, respectively. The study was performed at laboratory scale, exposing the plants separately to each individual contaminant at the concentrations of 5 mg L-1 for the metals (i.e. 2.5-5 times higher than the European limits concerning discharge into surface water), and 1 µg L-1 for the pharmaceuticals (concentration levels commonly found in wastewater). Depending on the plant species and contaminant tested, the range of different effects observed included low toxicity (i.e. Cr, Fe and diclofenac in L. minuta) and even a stimulatory effect on plant growth (i.e. for A. filiculoides with Al and for L. minuta with Al and levofloxacin). Moreover, both species proved to be very effective in the removal of Fe, Al and levofloxacin, with A. filiculoides showing the best performance (removal efficiency of 92%, 96%, and 60%, respectively), whereas for Cr and diclofenac the removal was always less than 10%. The higher removal capacity of A. filiculoides compared to L. minuta can be attributed to its superior tolerance of the contaminants, probably in turn related to the presence of nitrogen-fixing microorganism in its fronds.

Temporal Evolution of Bacterial Endophytes Associated to the Roots of Phragmites australis Exploited in Phytodepuration of Wastewater.

Improvement of industrial productions through more environment-friendly processes is a hot topic. In particular, land and marine environment pollution is a main concern, considering that recalcitrant compounds can be spread and persist for a long time. In this context, an efficient and cost-effective treatment of wastewater derived from industrial applications is crucial. Phytodepuration has been considered as a possible solution and it is based on the use of plants and their associated microorganisms to remove and/or transform pollutants. In this work we investigated the culturable microbiota of Phragmites australis roots, sampled from the constructed wetlands (CWs) pilot plant in the G.I.D.A. SpA wastewater treatment plant (WWTP) of Calice (Prato, Tuscany, Italy) before and after the CW activation in order to check how the influx of wastewater might affect the resident bacterial community. P. australis specimens were sampled and a panel of 294 culturable bacteria were isolated and characterized. This allowed to identify the dynamics of the microbiota composition triggered by the presence of wastewater. 27 out of 37 bacterial genera detected were exclusively associated to wastewater, and Pseudomonas was constantly the most represented genus. Moreover, isolates were assayed for their resistance against eight different antibiotics and synthetic wastewater (SWW). Data obtained revealed the presence of resistant phenotypes, including multi-drug resistant bacteria, and a general trend regarding the temporal evolution of resistance patterns: indeed, a direct correlation linking the appearance of antibiotic- and SWW-resistance with the time of exposure to wastewater was observed. In particular, nine isolates showed an interesting behavior since their growth was positively affected by the highest concentrations of SWW. Noteworthy, this study is among the few investigating the P. australis microbiota prior to the plant activation.

Optimization and validation of a method based on QuEChERS extraction and liquid chromatographic-tandem mass spectrometric analysis for the determination of perfluoroalkyl acids in strawberry and olive fruits, as model crops with different matrix characteristics.

A QuEChERS method was optimized and validated for the LC-MS/MS analysis of perfluoro-n-pentanoic acid (PFPeA), perfluoro-1-butanesulfonic acid (PFBuS), perfluoro-n-hexanoic acid (PFHxA), perfluoro-n-heptanoic acid (PFHpA), perfluoro-1-hexanesulfonic acid (PFHxS), perfluoro-n-octanoic acid (PFOA), perfluoro-n-nonanoic acid (PFNA), perfluoro-1-octanesulfonic acid (PFOS) and perfluoro-n-decanoic acid (PFDA) in freeze-dried strawberry and olive, as model fruits characterized by very different chemical compositions. The method was evaluated for apparent recovery, intra-day and inter-day precision, matrix effect and recovery. The method optimized for strawberry provided for most compounds absolute values of matrix effect (|ME%|) ≤ 11%, except for PFHxA, which showed a signal suppression of 22%. The extraction efficiency was tested at the spike levels 500-5000 pg/g d.w. for PFPeA, PFBuS, and PFHxA, and 100-1000 pg/g d.w. for the other target analytes, evidencing as a whole recoveries in the range of 65-89%. For olive fruits, due to their high fat content, an ultrasound-assisted extraction was necessary to obtain an efficient sample disgregation so as to increase the extraction yield and its precision. Moreover, a d-SPE clean-up with GCB allowed to achieve |ME%| ≤ 8% (except for PFBuS, which showed a signal enhancement of 19%) and recoveries calculated at the aforementioned spike levels were in the range 75-97%. The two methods provided very good linearity (R2 ≥ 0.9984) from 10,000 pg/g down to compound specific quantification limits, which were included in the ranges of 2.9-393 pg/g and 2.6-127 pg/g for strawberry and olive fruit, respectively. The methods were applied to the analysis of PFAAs in strawberry and olive fruits commercially available in two Italian supermarkets, as well as obtained under irrigation with various treated wastewaters (TWWs), evidencing in both cases a higher PFAAs occurrence in olives than in strawberry. However, PFAAs concentrations determined in the investigated fruit matrixes were quite low, being their sum 1.9 ng/g d.w. in the worst case (i.e. olive fruits grown under irrigation with TWWs).

Physicochemical properties and sorption capacities of sawdust-based biochars and commercial activated carbons towards ethoxylated alkylphenols and their phenolic metabolites in effluent wastewater from a textile district.

Three biochars were produced using sawdust from waste biomass, via a simple pyrolysis thermal conversion at 450, 650, and 850 °C (BC450, BC650, and BC850), without any activation process. These materials, together with vegetal and mineral commercial activated carbons (VAC and MAC), were characterized for their elemental composition, Brunauer-Emmett-Teller surface area, t-plot microporosity and Barrett-Joyner-Halenda mesoporosity. Moreover, iodine, phenol and methylene blue porosity indexes were measured. The materials were also evaluated for their pH of the point of zero charge, as well as near-surface chemical composition and surface functionality by means of X-ray photoelectron and Fourier-transform infrared spectroscopy. Ash content, water-extractable metals and polycyclic aromatic hydrocarbons (PAHs) were also determined. BC650 showed a much higher surface area (319 m2 g-1) compared to BC450 (102 m2 g-1), as well as an increase in aromatization and the residual presence of functional polar groups. BC850 exhibited a loss of polar and aromatic groups, with the dominance of graphitic carbon and the highest value of surface area (419 m2 g-1). Biochars comply with the EN 12915-1/2009 limits for metal and PAH release in water treatment. Biochars and MAC were tested using Langmuir and Freundlich isotherms for the sorption in real effluent wastewater of a mixture of 14 branched ethoxylated 4-t-octyl and 4-nonylphenols, as well as 4-t-octyl and 4-nonylphenol, the latter representing persistent, endocrine disrupting contaminants, widespread in the effluents from wastewater treatment plants and listed as priority/priority hazardous substances in the Directive 2013/39/EU. Biochars showed a lower sorption efficiency compared to MAC. The best performance was found for BC650 towards the alkylphenols (9-13 times less efficient than the MAC). Considering the lower market price of biochar compared to MAC (estimated as at least 16 times less expensive by a small market survey), the former can be considered more competitive than the latter.

Removal efficiency and mass balance of polycyclic aromatic hydrocarbons, phthalates, ethoxylated alkylphenols and alkylphenols in a mixed textile-domestic wastewater treatment plant.

In this work the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), mono and diethoxylate alkylphenols (AP1-2EOs) and alkylphenols (APs) have been investigated during a two-weeks period in a facility treating mixed textile-domestic wastewater (Prato, Italy). The wastewater treatment plant (WWTP) consists of primary sedimentation, activated sludge biological oxidation, secondary sedimentation, clariflocculation and ozonation. The sludge is treated within the facility by thickening, dewatering and final incineration, thus providing the almost quantitative removal of the adsorbed micropollutants. Naphthalene (50%), di(2-ethylhexyl) phthalate (74%) and branched 4-nonylphenols (59%) were the individual main representative compounds of each class in the influent wastewater, which showed concentration ranges of 5.6-66, 85-290 and 21-133µg/L for PAHs, PAEs and APs+AP1-2EOs, respectively. The WWTP efficiently removed PAHs, PAEs and APs+AP1-2EOs, providing effluent concentrations of 0.075-0.16ng/L 0.38-9.9µg/L and 0.53-1.4µg/L. All targeted priority and priority-hazardous micropollutants showed effluent concentrations in line with the European environmental quality standards (EQS), even though for di(2-ethylhexyl) phthalate and benzo(a)pyrene after correction for the dilution factor of the recipient. The WWTP performance was evaluated by mass balance, verifying its accuracy by monitoring Pb and Cd as conservative species. The biological treatment sections provided mass losses of 85.5%, 74.5% and 56.8% for APs+AP1-2EOs, PAEs and PAHs, highlighting efficient biotransformation performances of the activated sludge process. However, for the more volatile PAHs (e.g. naphthalene), a significant contribution of stripping cannot be excluded. A remarkable mass loss was also determined in the ozonation stage for PAEs (72.9%) and especially PAHs (97.0%), whereas a lower efficiency was observed for APs+AP1-2EOs (41.3%). The whole plant allowed for obtaining an almost quantitative removal (96.7-98.4%) for all targeted compounds.

Long-Term Performance of a Full-Scale Membrane Plant for Landfill Leachate Pretreatment: A Case Study.

This paper presents a case study describing a full-scale membrane bioreactor (MBR) for the pretreatment of landfill leachates. The treatment train includes an aerated equalization tank, a denitrification tank, an oxidation/nitrification tank, and two ultrafiltration units. The plant has worked continuously since 2008 treating landfill leachates at a flux of 2⁻11 L·h-1·m-2. The old train of membranes worked in these conditions for more than seven years prior to being damaged and replaced. The permeability (K) of the membrane varied between 30 and 80 L·h-1·m-2·bar-1 during the years of operation. In 2010, after two years of operation, the oxidation/nitrification tank was changed to work in alternate cycles of aerated and anoxic conditions, in order to improve the denitrification process. The MBR, working at a mean sludge retention time of 144 days and with mixed liquor suspended solids of 17 g/L, achieved high removal rates of conventional contaminants, with more than 98% for Biochemical Oxygen Demand, 96% for ammonium, and 75% for Chemical Oxygen Demand (COD). From the COD balance, half the COD entering was determined to be biologically oxidized into carbon dioxide, while another 24% remains in the sludge. In order to obtain these results, the company used 5.2 KWh·m-3, while spending 0.79 €·m-3.

Determination of phthalate diesters and monoesters in human milk and infant formula by fat extraction, size-exclusion chromatography clean-up and gas chromatography-mass spectrometry detection.

A sensitive and reliable analytical method was developed for the simultaneous determination of five phthalate diesters and corresponding monoesters in human milk samples and infant formulas. The method involved a liquid-liquid extraction with a CH2Cl2/CH3OH/NaCl 30% 2/1/0.5 (v/v/v) mixture, the clean-up of the extract by size-exclusion chromatography (swelling and elution solvent: cyclohexane/ethyl acetate 9/1v/v), the derivatization of monoesters by trimethylsilyl-diazomethane and instrumental analysis by gas chromatography coupled with mass spectrometry. Recovery was in the range of 83-115% and precision was found between 9% and 21%. For phthalate diesters, method detection limits (MDLs) ranged from hundreds of ng/kg to 4.2µg/kg on a fresh weight milk (f.w.) basis, depending on blank contribution evaluated in matrix. Lower MDLs (0.03-0.8µg/kg f.w.) were achieved for corresponding monoesters. The proposed method was applied to the determination of target compounds in nine human milk samples and four infant formulas, confirming their presence in all samples. However, a generally higher contamination was assessed in artificial milk than in breast milk samples.

Applicability of the direct injection liquid chromatographic tandem mass spectrometric analytical approach to the sub-ngL-1 determination of perfluoro-alkyl acids in waste, surface, ground and drinking water samples.

The applicability of a direct injection UHPLC-MS/MS method for the analysis of several perfluoroalkyl acids (PFAAs) in a wide range of water matrices was investigated. The method is based on the direct injection of 100µL of centrifuged water sample, without any other sample treatment. Very good method detection limits (0.014-0.44ngL-1) and excellent intra and inter-day precision (RSD% values in the range 1.8-4.4% and 2.7-5.7%, respectively) were achieved, with a total analysis time of 20min per sample. A high number of samples - i.e. 8 drinking waters (DW), 12 ground waters (GW), 13 surface waters (SW), 8 influents and 11 effluents of wastewater treatment plants (WWTPIN and WWTPOUT) were processed and the extent of matrix effect (ME) was calculated, highlighting the strong prevalence of |ME| < 20%. The occurrence of |ME| > 50% was occasionally observed only for perfluorooctanesulphonic and perfluorodecanoic acids. Linear discriminant analysis highlighted the great contribution of the sample origin (i.e. DW, GW, SW, WWTPIN and WWTPOUT) to the ME. Partial least square regression (PLS) and leave-one-out cross-validation were performed in order to interpret and predict the signal suppression or enhancement phenomena as a function of physicochemical parameters of water samples (i.e. conductivity, hardness and chemical oxygen demand) and background chromatographic area. The PLS approach resulted only in an approximate screening, due to the low prediction power of the PLS models. However, for most analytes in most samples, the fitted and cross-validated values were such as to correctly distinguish between | ME | higher than 20% or below this limit. PFAAs in the aforementioned water samples were quantified by means of the standard addition method, highlighting their occurrence mainly in WWTP influents and effluents, at concentrations as high as one hundred of µgL-1.