Wavelength domain spatial frequency modulation imaging: enabling fiber optic delivery and detection.

Spatial frequency modulation imaging (SPIFI) provides a simple architecture for modulating an extended illumination source that is compatible with single pixel imaging. We demonstrate wavelength domain SPIFI (WD-SPIFI) by encoding time-varying spatial frequencies in the spectral domain that can produce enhanced resolution images, like its spatial domain counterpart, spatial domain (SD) SPIFI. However, contrary to SD-SPIFI, WD-SPIFI enables remote delivery by single mode fiber, which can be attractive for applications where free-space imaging is not practical. Finally, we demonstrate a cascaded system incorporating WD-SPIFI in-line with SD-SPIFI enabling single pixel 2D imaging without any beam or sample scanning.

Fluorescent coherent diffractive imaging with accelerating light sheets.

Fluorescence microscopy is a powerful method for producing high fidelity images with high spatial resolution, particularly in the biological sciences. We recently introduced coherent holographic image reconstruction by phase transfer (CHIRPT), a single-pixel imaging method that significantly improves the depth of field in fluorescence microscopy and enables holographic refocusing of fluorescent light. Here we demonstrate that by installing a confocal slit conjugate to the illuminating light sheets used in CHIRPT, out-of-focus light is rejected, thus improving lateral spatial resolution and rejecting noise from out-of-focus fluorescent light. Confocal CHIRPT is demonstrated and fully modeled. Finally, we explore the use of beam shaping and point-spread-function engineering to enable holographic single-lens light-sheet microscopy with single-pixel detection.

Single pixel quantitative phase imaging with spatial frequency projections.

We introduce a new single pixel imaging technique that automatically co-registers quantitative phase and incoherent image modalities through the simultaneous acquisition of identical object spatial frequency information. The technique consists of using a time varying groove density diffraction grating to produce a reference and scan beam. The interference between the beams produce time varying spatial frequencies in the sample. The collected light on a single pixel detector produces a time trace that allows easy recovery of coherent and incoherent contrast mechanisms. We derive theory for the quantitative phase and show excellent agreement with experimental data and numeric model. Additionally, we derive a general theory of single pixel quantitative phase theory that can be applied broadly to general methods that use a sequence of modulated light patterns for single pixel phase imaging.

Superresolved multiphoton microscopy with spatial frequency-modulated imaging.

Superresolved far-field microscopy has emerged as a powerful tool for investigating the structure of objects with resolution well below the diffraction limit of light. Nearly all superresolution imaging techniques reported to date rely on real energy states of fluorescent molecules to circumvent the diffraction limit, preventing superresolved imaging with contrast mechanisms that occur via virtual energy states, including harmonic generation (HG). We report a superresolution technique based on spatial frequency-modulated imaging (SPIFI) that permits superresolved nonlinear microscopy with any contrast mechanism and with single-pixel detection. We show multimodal superresolved images with two-photon excited fluorescence (TPEF) and second-harmonic generation (SHG) from biological and inorganic media. Multiphoton SPIFI (MP-SPIFI) provides spatial resolution up to 2η below the diffraction limit, where η is the highest power of the nonlinear intensity response. MP-SPIFI can be used to provide enhanced resolution in optically thin media and may provide a solution for superresolved imaging deep in scattering media.

Three-dimensional single-pixel imaging of incoherent light with spatiotemporally modulated illumination.

We derive analytic expressions for the three-dimensional coherent transfer function (CTF) and coherent spread function (CSF) for coherent holographic image reconstruction by phase transfer (CHIRPT) microscopy with monochromatic and broadband illumination sources. The 3D CSF and CTF were used to simulate CHIRPT images, and the results show excellent agreement with experimental data. Finally, we show that the formalism presented here for computing the CSF/CTF pair in CHIRPT microscopy can be readily extended to other forms of single-pixel imaging, such as spatial-frequency-modulated imaging.

Simultaneous spatial frequency modulation imaging and micromachining with a femtosecond laser.

A Ti:Al2O3 chirped-pulse amplification system is used to simultaneously image and machine. By combining simultaneous spatial and temporal focusing (SSTF) with spatial frequency modulation for imaging (SPIFI), we are able to decouple the imaging and cutting beams to attain a resolution and a field-of-view that is independent of the cutting beam, while maintaining single-element detection. This setup allows for real-time feedback with the potential for simultaneous nonlinear imaging and imaging through scattering media. The novel SSTF machining platform uses refractive optics that, in general, are prohibitive for energetic, amplified pulses that might otherwise compromise the integrity of the focus as a result of nonlinear effects.

Ultra-large field-of-view two-photon microscopy.

We present a two-photon microscope that images the full extent of murine cortex with an objective-limited spatial resolution across an 8 mm by 10 mm field. The lateral resolution is approximately 1 µm and the maximum scan speed is 5 mm/ms. The scan pathway employs large diameter compound lenses to minimize aberrations and performs near theoretical limits. We demonstrate the special utility of the microscope by recording resting-state vasomotion across both hemispheres of the murine brain through a transcranial window and by imaging histological sections without the need to stitch.

Plane wave analysis of coherent holographic image reconstruction by phase transfer (CHIRPT).

Fluorescent imaging plays a critical role in a myriad of scientific endeavors, particularly in the biological sciences. Three-dimensional imaging of fluorescent intensity often requires serial data acquisition, that is, voxel-by-voxel collection of fluorescent light emitted throughout the specimen with a nonimaging single-element detector. While nonimaging fluorescence detection offers some measure of scattering robustness, the rate at which dynamic specimens can be imaged is severely limited. Other fluorescent imaging techniques utilize imaging detection to enhance collection rates. A notable example is light-sheet fluorescence microscopy, also known as selective-plane illumination microscopy, which illuminates a large region within the specimen and collects emitted fluorescent light at an angle either perpendicular or oblique to the illumination light sheet. Unfortunately, scattering of the emitted fluorescent light can cause blurring of the collected images in highly turbid biological media. We recently introduced an imaging technique called coherent holographic image reconstruction by phase transfer (CHIRPT) that combines light-sheet-like illumination with nonimaging fluorescent light detection. By combining the speed of light-sheet illumination with the scattering robustness of nonimaging detection, CHIRPT is poised to have a dramatic impact on biological imaging, particularly for in vivo preparations. Here we present the mathematical formalism for CHIRPT imaging under spatially coherent illumination and present experimental data that verifies the theoretical model.

Differential Multiphoton Laser Scanning Microscopy.

Multifocal multiphoton microscopy (MMM) in the biological and medical sciences has become an important tool for obtaining high resolution images at video rates. While current implementations of MMM achieve very high frame rates, they are limited in their applicability to essentially those biological samples that exhibit little or no scattering. In this paper, we report on a method for MMM in which imaging detection is not necessary (single element point detection is implemented), and is therefore fully compatible for use in imaging through scattering media. Further, we demonstrate that this method leads to a new type of MMM wherein it is possible to simultaneously obtain multiple images and view differences in excitation parameters in a single shot.

Photon counting, censor corrections, and lifetime imaging for improved detection in two-photon microscopy.

We present a high-speed photon counter for use with two-photon microscopy. Counting pulses of photocurrent, as opposed to analog integration, maximizes the signal-to-noise ratio so long as the uncertainty in the count does not exceed the gain-noise of the photodetector. Our system extends this improvement through an estimate of the count that corrects for the censored period after detection of an emission event. The same system can be rapidly reconfigured in software for fluorescence lifetime imaging, which we illustrate by distinguishing between two spectrally similar fluorophores in an in vivo model of microstroke.

Optimizing the fluorescent yield in two-photon laser scanning microscopy with dispersion compensation.

A challenge for nonlinear imaging in living tissue is to maximize the total fluorescent yield from each fluorophore. We investigated the emission rates of three fluorophores-rhodamine B, a red fluorescent protein, and CdSe quantum dots-while manipulating the phase of the laser excitation pulse at the focus. In all cases a transform-limited pulse maximized the total yield to insure the highest signal-to-noise ratio. Further, we find evidence of fluorescence antibleaching in quantum dot samples.

Blind frequency-resolved optical-gating pulse characterization for quantitative differential multiphoton microscopy.

We use a unique multifocal multiphoton microscope to directly characterize the pulse in the focal plane of a high-NA objective using second-harmonic generation frequency-resolved optical gating (FROG). Because of the nature of the optical setup, femtosecond laser pulses of orthogonal polarization states are generated in the focal plane, each acquiring a different spectral dispersion. By applying an additional constraint on the phase extraction algorithm, we simultaneously extract both the gate and probe pulses from a single spectrogram with a FROG error of 0.016.

Single-pixel fluorescent diffraction tomography.

Optical diffraction tomography (ODT) is an indispensable tool for studying objects in three dimensions. Until now, ODT has been limited to coherent light because spatial phase information is required to solve the inverse scattering problem. We introduce a method that enables ODT to be applied to imaging incoherent contrast mechanisms such as fluorescent emission. Our strategy mimics the coherent scattering process with two spatially coherent illumination beams. The interferometric illumination pattern encodes spatial phase in temporal variations of the fluorescent emission, thereby allowing incoherent fluorescent emission to mimic the behavior of coherent illumination. The temporal variations permit recovery of the spatial distribution of fluorescent emission with an inverse scattering model. Simulations and experiments demonstrate isotropic resolution in the 3D reconstruction of a fluorescent object.

Harmonic optical tomography of nonlinear structures.

Second-harmonic generation microscopy is a valuable label-free modality for imaging non-centrosymmetric structures and has important biomedical applications from live-cell imaging to cancer diagnosis. Conventional second-harmonic generation microscopy measures intensity signals that originate from tightly focused laser beams, preventing researchers from solving the scattering inverse problem for second-order nonlinear materials. Here, we present harmonic optical tomography (HOT) as a novel modality for imaging microscopic, nonlinear and inhomogeneous objects. The HOT principle of operation relies on inter-ferometrically measuring the complex harmonic field and using a scattering inverse model to reconstruct the three-dimensional distribution of harmonophores. HOT enables strong axial sectioning via the momentum conservation of spatially and temporally broadband fields. We illustrate the HOT operation with experiments and reconstructions on a beta-barium borate crystal and various biological specimens. Although our results involve second-order nonlinear materials, we show that this approach applies to any coherent nonlinear process.

Fourier computed tomographic imaging of two dimensional fluorescent objects.

We introduce a new form of tomographic imaging that is particularly advantageous for a new class of super-resolution optical imaging methods. Our tomographic method, Fourier Computed Tomography (FCT), operates in a conjugate domain relative to conventional computed tomography techniques. FCT is the first optical tomography method that records complex projections of the object spatial frequency distribution. From these spatial frequency projections, the spatial slice theorem is derived, which is used to build a tomographic imaging reconstruction algorithm. FCT enables enhancement of spatial frequency support along a single spatial direction to be isotropic in the entire transverse spatial frequency domain.

Characterization of a High Efficiency, Ultrashort Pulse Shaper Incorporating a Reflective 4096-Element Spatial Light Modulator.

We demonstrate pulse shaping via arbitrary phase modulation with a reflective, 1×4096 element, liquid crystal spatial light modulator (SLM). The unique construction of this device provides a very high efficiency when the device is used for phase modulation only in a prism based pulse shaper, namely 85%. We also present a single shot characterization of the SLM in the spatial domain and a single shot characterization of the pulse shaper in the spectral domain. These characterization methods provide a detailed picture of how the SLM modifies the spectral phase of an ultrashort pulse.

Modified Roller Tube Method for Precisely Localized and Repetitive Intermittent Imaging During Long-term Culture of Brain Slices in an Enclosed System.

Cultured rodent brain slices are useful for studying the cellular and molecular behavior of neurons and glia in an environment that maintains many of their normal in vivo interactions. Slices obtained from a variety of transgenic mouse lines or use of viral vectors for expression of fluorescently tagged proteins or reporters in wild type brain slices allow for high-resolution imaging by fluorescence microscopy. Although several methods have been developed for imaging brain slices, combining slice culture with the ability to perform repetitive high-resolution imaging of specific cells in live slices over long time periods has posed problems. This is especially true when viral vectors are used for expression of exogenous proteins since this is best done in a closed system to protect users and prevent cross contamination. Simple modifications made to the roller tube brain slice culture method that allow for repetitive high-resolution imaging of slices over many weeks in an enclosed system are reported. Culturing slices on photoetched coverslips permits the use of fiducial marks to rapidly and precisely reposition the stage to image the identical field over time before and after different treatments. Examples are shown for the use of this method combined with specific neuronal staining and expression to observe changes in hippocampal slice architecture, viral-mediated neuronal expression of fluorescent proteins, and the development of cofilin pathology, which was previously observed in the hippocampus of Alzheimer's disease (AD) in response to slice treatment with oligomers of amyloid-ß (Aß) peptide.

A pragmatic guide to multiphoton microscope design.

Multiphoton microscopy has emerged as a ubiquitous tool for studying microscopic structure and function across a broad range of disciplines. As such, the intent of this paper is to present a comprehensive resource for the construction and performance evaluation of a multiphoton microscope that will be understandable to the broad range of scientific fields that presently exploit, or wish to begin exploiting, this powerful technology. With this in mind, we have developed a guide to aid in the design of a multiphoton microscope. We discuss source selection, optical management of dispersion, image-relay systems with scan optics, objective-lens selection, single-element light-collection theory, photon-counting detection, image rendering, and finally, an illustrated guide for building an example microscope.

Eliminating the scattering ambiguity in multifocal, multimodal, multiphoton imaging systems.

In this work we present how to entirely remove the scattering ambiguity present in existing multiphoton multifocal systems. This is achieved through the development and implementation of single-element detection systems that incorporate high-speed photon-counting electronics. These systems can be used to image entire volumes in the time it takes to perform a single transverse scan (four depths simultaneously at a rate of 30 Hz). In addition, this capability is further exploited to accomplish single-element detection of multiple modalities (two photon excited fluorescence and second harmonic generation) and to perform efficient image deconvolution. Finally, we demonstrate a new system that promises to significantly simplify this promising technology.

Remote focusing for programmable multi-layer differential multiphoton microscopy.

We present the application of remote focusing to multiphoton laser scanning microscopy and utilize this technology to demonstrate simultaneous, programmable multi-layer imaging. Remote focusing is used to independently control the axial location of multiple focal planes that can be simultaneously imaged with single element detection. This facilitates volumetric multiphoton imaging in scattering specimens and can be practically scaled to a large number of focal planes. Further, it is demonstrated that the remote focusing control can be synchronized with the lateral scan directions, enabling imaging in orthogonal scan planes.