Wet-priming extracorporeal membrane oxygenation device maintains sterility for up to 35 days of follow-up.

In emergency cases, rapid extracorporeal membrane oxygenation (ECMO) device initialization is able to drastically reduce the incidence of patient morbidity and/or mortality. Pre-assembled and ready-to-use ECMO circuits might save up to 30-60 critical minutes in patient management. Six ECMO circuits (Oxygenator D905 EOS with REVOLUTION™ pump and Sorin PTS) were assembled in the operating room in standard conditions and then placed at 37°C for 35 days in order to evaluate possible contamination and ingrowth of micro-organisms. Every 7 days after ECMO circuit assembly and wet-priming, samples of priming fluid were analyzed to verify the presence/absence of possible common contaminants (Enterobacteriaceae, Staphylococcus aureus and fungi). Moreover, two supplementary circuits, used as positive controls, were deliberately inoculated with a known concentration of a Escherichia coli strain and prime samplings carried out at different time-points to determine bacterial growth rate. Sterility was maintained in the ECMO circuits for up to 35 days.

Analysis of the molecular mobility of collagen and elastin in safe, atheromatous and aneurysmal aortas.

AIM OF THE STUDY: In this study, we propose to use a thermal technique, Differential Scanning Calorimetry (DSC) to follow the evolution of elastin and collagen in safe and pathological cardiovascular tissues. PATIENTS AND METHODS: The first part of this study deals with the analysis of the elastin network and associated proteins during ageing (from children to old persons) in aortic walls. The second part is devoted to the characterization of the collagenic phase in aneurysms. In both cases, physical data are correlated with biochemical analyses. RESULTS AND CONCLUSION: For old persons aortas with atheromatous stades, elastin and associated proteins are found to interpenetrate to form a homogenous phase. Abdominal aortic aneurysms (AAA) are characterized by structural alterations of the aortic wall resulting from the degradation of elastic fibers and an increase of collagen/elastin ratio. Notable modifications are evidenced between collagen from control tissue and collagen from AAA, particularly concerning the thermal denaturation. Biochemical and thermal results are compatible with the increase of new collagen deposition and/or impairment of the collagen phase stability in the extracellular matrix of AAAs.

Can Heart Valve Decellularization Be Standardized? A Review of the Parameters Used for the Quality Control of Decellularization Processes.

When a tissue or an organ is considered, the attention inevitably falls on the complex and delicate mechanisms regulating the correct interaction of billions of cells that populate it. However, the most critical component for the functionality of specific tissue or organ is not the cell, but the cell-secreted three-dimensional structure known as the extracellular matrix (ECM). Without the presence of an adequate ECM, there would be no optimal support and stimuli for the cellular component to replicate, communicate and interact properly, thus compromising cell dynamics and behaviour and contributing to the loss of tissue-specific cellular phenotype and functions. The limitations of the current bioprosthetic implantable medical devices have led researchers to explore tissue engineering constructs, predominantly using animal tissues as a potentially unlimited source of materials. The high homology of the protein sequences that compose the mammalian ECM, can be exploited to convert a soft animal tissue into a human autologous functional and long-lasting prosthesis ensuring the viability of the cells and maintaining the proper biomechanical function. Decellularization has been shown to be a highly promising technique to generate tissue-specific ECM-derived products for multiple applications, although it might comprise very complex processes that involve the simultaneous use of chemical, biochemical, physical and enzymatic protocols. Several different approaches have been reported in the literature for the treatment of bone, cartilage, adipose, dermal, neural and cardiovascular tissues, as well as skeletal muscle, tendons and gastrointestinal tract matrices. However, most of these reports refer to experimental data. This paper reviews the most common and latest decellularization approaches that have been adopted in cardiovascular tissue engineering. The efficacy of cells removal was specifically reviewed and discussed, together with the parameters that could be used as quality control markers for the evaluation of the effectiveness of decellularization and tissue biocompatibility. The purpose was to provide a panel of parameters that can be shared and taken into consideration by the scientific community to achieve more efficient, comparable, and reliable experimental research results and a faster technology transfer to the market.

Isolation of intact aortic valve scaffolds for heart-valve bioprostheses: extracellular matrix structure, prevention from calcification, and cell repopulation features.

Extracellular matrix (ECM) scaffolds isolated from valvulated conduits can be useful in developing durable bioprostheses by tissue engineering provided that anatomical shape, architecture, and mechanical properties are preserved. As evidenced by SEM, intact scaffolds were derived from porcine aortic valves by the combined use of Triton X-100 and cholate (TRI-COL) or N-cetylpyridinium (CPC) and subsequent nucleic acid removal by nuclease. Both treatments were effective in removing most cells and all the cytomembranes, with preservation of (1) endothelium basal membranes, (2) ECM texture, including the D-periodical interaction of small proteoglycans with normally D-banded collagen fibrils, and (3) mechanical properties of the treated valves. Ultrastructural features agreed with DNA, hexosamine, and uronic acid biochemical estimations. Calcification potential, assessed by a 6-week rat subdermal model, was significantly reduced by TRI-COL/nuclease treatment. This was not true for CPC only, despite better proteoglycan preservation, suggesting that nucleic acids also are involved in calcification onset. Human fibroblasts, used to repopulate TRI-COL samples, formed mono- or multilayers on surfaces, and groups of cells also were scattered within the valve leaflet framework. A biocompatible scaffolds of this kind holds promise for production of durable valve bioprostheses that will be able to undergo probable turnover and/or remodeling by repopulating recipient cells.

First quantitative assay of alpha-Gal in soft tissues: presence and distribution of the epitope before and after cell removal from xenogeneic heart valves.

Decellularized xenograft heart valves might be the ideal scaffolds for tissue engineered heart valves as the alternative to the currently used biological and mechanical prostheses. However, removal of the alpha-Gal epitope is a prerequisite to avoid hyperacute rejection of untreated xenograft material. The aim of this study was to develop an ELISA soft-tissue assay for alpha-Gal quantification in xenograft heart valves before and after a detergent-based (TriCol) or equivalent cell removal procedure. Leaflets from porcine valves were enzymatically digested to expose the epitope and reacted with the alpha-Gal monoclonal antibody M86 for its recognition. Rabbit erythrocytes were used as a reference for the quantification of alpha-Gal. Native aortic and pulmonary leaflets exhibited different epitope concentration: 4.33×10(11) vs. 7.12×10(11)/10 mg wet tissue (p<0.0001). Sampling of selected zones in native valves revealed a different alpha-Gal distribution within and among different leaflets. The pattern was consistent with immunofluorescence analysis and was unrelated to microvessel density distribution. After TriCol treatment alpha-Gal was no longer detectable in both pulmonary and aortic decellularized valves, confirming the ability of this method to remove both cells and alpha-Gal antigen. These results hold promise for a reliable quantitative evaluation of alpha-Gal in decellularized valves obtained from xenograft material for tissues engineering purposes. Additionally, this method is applicable to further evaluate currently used xenograft bioprostheses.

Copper retention, calcium release and ultrastructural evidence indicate specific Cuprolinic Blue uptake and peculiar modifications in mineralizing aortic valves.

Previously, reactions with copper phthalocyanines at 0.05 M critical electrolyte concentration were found to cause demineralization in calcifying porcine aortic valves after subdermal implantation in rat, as well as simultaneous visualization of peculiar phthalocyanine-positive layers around cells and cell-derived matrix vesicles. In the present investigation, an appraisal was made of the mechanism and specificity of reactions with Cuprolinic Blue by comparing quantitatively calcium release and copper retention by calcified aortic valves reacted with this phthalocyanine under different critical electrolyte concentration conditions, and the corresponding ultrastructural patterns. It was found that (i) decalcifying properties are inversely proportional to salt molarity; (ii) reactivity to Cuprolinic Blue is critical electrolyte concentration-dependent, since the greatest copper retention occurred in 0.05 M critical electrolyte concentration Cuprolinic Blue-reacted samples, the only ones that also exhibited phthalocyanine-positive layers; (iii) the appearance of phthalocyanine-positive layers depends on Cuprolinic Blue uptake, revealing pericellular clustering of calcium-binding, anionic molecules; and (iv) minor Cuprolinic Blue uptake occurs by residual proteoglycans which still remain in the extracellular matrix after 6-week-long subdermal implantation. The present results indicate that this method is appropriate for the study of mineralized tissues and illustrate peculiar tissue modifications occurring at least in the experimental conditions used here.