Toward the Coordination Fingerprint of the Edge-Sharing BO4 Tetrahedra.

The K3Sb4BO13 (KSBO) material undergoes an uncommon symmetry increase upon cooling, from triclinic symmetry at room temperature to monoclinic symmetry at low temperature. The first-order phase transition is accompanied by shrinkage of the unit cell, resulting in the transformation of every pair of head-to-tail triangular BO3 groups into one B2O6 unit featuring unique edge-sharing BO4 tetrahedra. This is the first material with B2O6 units formed through temperature lowering and exhibiting a B-O anionic framework composed uniquely of isolated edge-sharing BO4 tetrahedra. Several techniques including single-crystal X-ray diffraction experiments, Raman and 11B magic-angle-spinning NMR spectroscopies, and, for the first time, B K-edge electron energy loss spectroscopy were used to evidence the rare and discrete B2O6 units. The complete transformation of BO3 units into B2O6 units makes the KSBO compound the perfect candidate to extract information about B2O6 units whose signal can be unambiguously assigned.

Layered Quaternary Compounds in the Cu2S-In2S3-Ga2S3 system.

Several new materials with four structure-types (e.g., Cu0.32In1.74Ga0.84S4 (CIGS4), Cu0.65In1.75Ga1.4S5 (CIGS5), Cu1.44In2.77Ga0.76S6 (CIGS6), and Cu1.1In2.49Ga1.8S7 (CIGS7)) have been evidenced in the Cu2S-In2S3-Ga2S3 pseudo-ternary system. All of them present a 2D structure built upon infinite 2/∞[InS2] layers ((InS6) octahedra sharing edges) on which condense on both sides mono-, bi-, or tri-2/∞[MS] layers ((MS4) tetrahedra (M = Cu, In, Ga) sharing corners). (M(Td))n-2(In(Oh))Sn slabs are separated from each other by a van der Waals gap, and subscript n refers to the number of sulfur layers within the building block. These compounds have the propensity to display stacking faults but also polymorphic forms. Their optical gap (ca. 1.7 eV) is quite similar to the one of the Cu(In0.7Ga0.3)S2 chalcopyrite absorbers used in tandem solar cells, and the major charge carriers are holes. This suggests that they might be very attractive for photovoltaic applications in thin film devices but also for photocatalysis.

Impact of Nanostructuration on the Chemical Composition of Nickel Oxide Nanoparticles.

Reduction of the size of a particle down to a few tens of nanometers or below may drastically affect its physical properties. That is well-known for quantum dots. Conversely, many works consider the chemical composition of nanoparticles as invariant upon reduction of their dimension. Here we demonstrate that the chemical composition of a transition-metal oxide, namely, nickel oxide, is drastically affected by its nanostructuration.

Near interface ionic transport in oxygen vacancy stabilized cubic zirconium oxide thin films.

The cubic phase of pure zirconia (ZrO2) is stabilized in dense thin films through a controlled introduction of oxygen vacancies (O defects) by cold-plasma-based sputtering deposition. Here, we show that the cubic crystals present at the film/substrate interface near-region exhibit fast ionic transport, which is superior to what is obtained with similar yttrium-stabilized cubic zirconia thin films.

Controlling the Formation of Nanocavities in Kirkendall Nanoobjects through Sequential Thermal Ex Situ Oxidation and In Situ Reduction Reactions.

Controlling the porosity, the shape, and the morphology of Kirkendall hollow nanostructures is the key factor to tune the properties of these tailor-made nanomaterials which allow in turn broadening their applications. It is shown that by applying a continuous oxidation to copper nanowires following a temperature ramp protocol, one can synthesize cuprous oxide nanotubes containing periodic copper nanoparticles. A further oxidation of such nanoobjects allows obtaining cupric oxide nanotubes with a bamboo-like structure. On the other hand, by applying a sequential oxidation and reduction reactions to copper nanowires, one can synthesize hollow nanoobjects with complex shapes and morphologies that cannot be obtained using the Kirkendall effect alone, such as necklace-like cuprous oxide nanotubes, periodic solid copper nanoparticles or hollow cuprous oxide nanospheres interconnected with single crystal cuprous oxide nanorods, and aligned and periodic hollow nanospheres embedded in a cuprous oxide nanotube. The strategy demonstrated in this study opens new avenues for the engineering of hollow nanostructures with potential applications in gas sensing, catalysis, and energy storage.

Modulation of Defects in Semiconductors by Facile and Controllable Reduction: The Case of p-type CuCrO2 Nanoparticles.

Optical and electrical characteristics of solid materials are well-known to be intimately related to the presence of intrinsic or extrinsic defects. Hence, the control of defects in semiconductors is of great importance to achieve specific properties, for example, transparency and conductivity. Herein, a facile and controllable reduction method for modulating the defects is proposed and used for the case of p-type delafossite CuCrO2 nanoparticles. The optical absorption in the infrared region of the CuCrO2 material can then be fine-tuned via the continuous reduction of nonstoichiometric Cu(II), naturally stabilized in small amounts. This reduction modifies the concentration of positive charge carriers in the material, and thus the conductive and reflective properties, as well as the flat band potential. Indeed, this controllable reduction methodology provides a novel strategy to modulate the (opto-) electronic characteristics of semiconductors.

Fluorescent carboxylic and phosphonic acids: comparative photophysics from solution to organic nanoparticles.

Phosphonic and carboxylic fluorescent nanoparticles have been fabricated by direct reprecipitation in water. Their fluorescence properties strongly differ from those of the corresponding esters where strong H-bonding formation is prohibited. Comparative experiments between the two acid derivatives, differing only in their acid functions while keeping the same alkyl chain, have evidenced the peculiar behavior of the phosphonic acid derivative compared to its carboxylic analog. A dramatic emission quenching for the phosphonic acid in aprotic toluene could be observed while a fivefold increase in the fluorescence signal was observed for molecules assembled as nanoparticles. Such properties have been attributed on the theoretical basis to the formation of folded conformers in solution, leading to deactivation of the radiative excited state through intramolecular H-bonding. These studies evidence for the first time through time-resolved fluorescence measurements the stronger H-donating character of phosphonic acids compared to the carboxylic ones, and provide information on the degree of structural heterogeneity within the nanoparticles. They should pave the way for the rational fabrication of chelating acid fluorophores, able to complex metal oxides to yield stiff hybrid magnetofluorescent nanoparticles which are attracting considerable attention in the growing fields of bimodal imaging and vectorization applications.

Design of metastable oxychalcogenide phases by topochemical (de)intercalation of sulfur in La2O2S2.

Designing and synthesising new metastable compounds is a major challenge of today's material science. While exploration of metastable oxides has seen decades-long advancement thanks to the topochemical deintercalation of oxygen as recently spotlighted with the discovery of nickelate superconductor, such unique synthetic pathway has not yet been found for chalcogenide compounds. Here we combine an original soft chemistry approach, structure prediction calculations and advanced electron microscopy techniques to demonstrate the topochemical deintercalation/reintercalation of sulfur in a layered oxychalcogenide leading to the design of novel metastable phases. We demonstrate that La2O2S2 may react with monovalent metals to produce sulfur-deintercalated metastable phases La2O2S1.5 and oA-La2O2S whose lamellar structures were predicted thanks to an evolutionary structure-prediction algorithm. This study paves the way to unexplored topochemistry of mobile chalcogen anions.

The 2C putative helicase of echovirus 30 adopts a hexameric ring-shaped structure.

The 2C protein, which is an essential ATPase and one of the most conserved proteins across the Picornaviridae family, is an emerging antiviral target for which structural and functional characterization remain elusive. Based on a distant relationship to helicases of small DNA viruses, piconavirus 2C proteins have been predicted to unwind double-stranded RNAs. Here, a terminally extended variant of the 2C protein from echovirus 30 has been studied by means of enzymatic activity assays, transmission electron microscopy, atomic force microscopy and dynamic light scattering. The transmission electron-microscopy technique showed the existence of ring-shaped particles with ∼12 nm external diameter. Image analysis revealed that these particles were hexameric and resembled those formed by superfamily 3 DNA virus helicases.