Indomethacin nanoparticles for applications in liquid ocular formulations.

UNLABELLED: Studies in recent years have consistently shown that polymeric drug nanocarriers can be used in drug release and drug delivery systems to treat eye disorders. To achieve effective control over drug delivery, it is of crucial importance what kind of polymer and which method for drug inclusion in the nanoscale carrier we choose and what conditions are needed for the performance of this process. OBJECTIVE: The aim of this study was to produce poly(vinyl acetate) nanoparticles with indomethacin incorporated in them, assess the effect of time for dialysis of the residual monomer and initiator on the degree of incorporation of indomethacin in the nanoparticles and on the kinetics of its release, to include them in ophtalmic formulations. MATERIALS AND METHODS: Poly(vinyl acetate) nanoparticles with indomethacin were obtained by emulsion radical polymerization of vinyl acetate in the presence of indomethacin (in situ inclusion) and the absence of emulsifier. To release the residual monomer and initiator (ammonium persulfate) the obtained latexes were dialysed for 6, 9, 18 and 23 hours and then the nanoparticles were freeze-dried. Structural analysis was performed by transmission electronic microscopy, infrared spectroscopy, differential thermal analysis and thermogravimetry. Release of indomethacin was observed using ultraviolet spectroscopy. RESULTS: We proved the delayed release of indomethacin from the poly(vinyl acetate) nanocarrier and the lack of chemical interaction between the polymer and indomethacin. After 9-hour dialysis the initiator and the residual vinyl acetate were removed from the nanoparticles, while the entrapped indomethacin kept therapeutic concentrations. CONCLUSIONS: Dialysis for more than 6 and no more than 9 hours is recommended to remove the residual monomer and initiator when preparing indomethacin nanoparticles by in situ radical emulsion polymerization of vinyl acetate, for inclusion in liquid ocular formulations.

Synthesis and application of vinylpyridine containing ion-imprinted copolymer gel microbeads for Cu(II) solid-phase extraction.

The influence of polymer matrix on the extraction efficiency for Cu(II) and selectivity against metal ions such as Ni(II), Cd(II), Pb(II) of Cu(II) imprinted copolymer gels was described. The functional monomers investigated include the weakly basic 4-vinylpyridine (4-VP) and its mixure with the acidic and hydrogen binding methacrylic acid. Copolymer gels were prepared by dispersion cross-linking copolymerization using Cu(II)-4-(2-pyridylazo)resorcinol complex, Cu(II), or 4-(2-pyridylazo)resorcinol as templates. The chemical structure and morphology of the Cu(II)-imprinted microbeads are defined using elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. Extraction efficiencies of newly synthesized sorbents were studied by batch procedure. The prepared copolymer gel with 4-VP as monomer and Cu(II)-4-(2-pyridylazo)resorcinol complex has higher capacity and selectivity toward Cu(II) than the copolymer gels prepared using the mixture of methacrylic acid and 4-VP. This new sorbent can be used as an effective SPE material for the highly selective preconcentration and separation of Cu(II) in sea water samples. It shows high mechanical and chemical stability.

Photoactive chitosan switching on bone-like apatite deposition.

The work was focused on the synthesis and characterization of the chitosan-g-fluorescein (CHFL) conjugate polymer as a biocompatible amphiphilic water-soluble photosensitizer, able to stimulate hydroxyapatite deposition upon visible light irradiation. Fluorescein (FL) grafting to chitosan (CH) chains was confirmed by UV-vis analysis of water solutions of FL and CHFL and by Fourier transform infrared spectroscopy (FTIR-ATR) analysis of CHFL and CH. Smooth CHFL cast films with 4 microm thickness were obtained by solvent casting. Continuous exposure to visible light for 7 days was found to activate the deposition of calcium phosphate crystals from a conventional simulated body fluid (SBF 1.0x) on the surface of CHFL cast films. EDX and FTIR-ATR analyses confirmed the apatite nature of the deposited calcium phosphate crystals. CHFL films preincubated in SBF (1.0x) solution under visible light irradiation and in the dark for 7 days were found to support the in vitro adhesion and proliferation of MG63 osteoblast-like cells (MTT viability test; 1-3 days culture time). On the other hand, the mineralization ability of MG63 osteoblast-like cells was significantly improved on CHFL films preincubated under visible light exposure (alkaline phosphatase activity (ALP) test for 1, 3, 7, and 14 days). The use of photoactive biocompatible conjugate polymer, such as CHFL, may lead to new therapeutic options in the field of bone/dental repair, exploiting the photoexcitation mechanism as a tool for biomineralization.

Chaperone-like effect of polyzwitterions on the interaction of C1q with IgG.

The amphiphilic polyzwitterion (PZ) poly(ethylene oxide-b-N,N-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate), zwitterionic surfactant (ZS) n-dodecyl-N,N-dimethyl-3-ammonium-1-propanesulfonate, and zwitterionic monomer (ZM) N,N-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate were analyzed for their suggested chaperone-like effect on the interaction of C1q and IgG. Our results proved that the PZ retarded the C1q interaction with IgG, demonstrating a specific protein-folding helper effect. The ZS enhanced this interaction, when the ZS concentration was lower than the critical micelle concentration (CMC), and retarded it, when the ZS concentration was above the CMC. The ZM, with no self-assembling ability, did not influence this interaction. These results support the hypothesis of a hydrophobic interaction between Pts and hydrophobic domains of partly denatured protein molecules. The amphiphilic self-assemblies, formed by polyzwitterionic macromolecules or zwitterionic surfactants, have the ability to transform the hydrophobic domains of the protein molecules into hydrophilic ones, covering them with their hydrophilic parts.

Autoantigenicity of human C1q is associated with increased hydrophobicity due to conformational transitions in the globular heads.

We analyzed the structural features of C1q that underlie its autoantigenicity by means of a model system using the amphiphilic polyzwitterion (PZ), poly(ethylene oxide-b-N,N-dimethyl(methacryloyloxyethyl) ammonium propanesulfonate) in the process of C1q immobilization. The source of anti-C1q autoantibodies was human sera from patients with Lupus Nephritis (LN). Both analyzed concentrations of PZ, 25 mM and 50 mM, were found to be applicable for inducing conformational transitions which resulted in increased recognition of C1q and the globular domain of its B polypeptide chain, designated ghB, by the LN autoantibodies. The registered conformational transitions displayed a hydrophobic enhancement of the protein microenvironment due to the presence of hydrophobic binding sites in ghB which consequently affected the autoantigenicity of the whole C1q molecule.

Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury.

Metal ion-imprinted polymer particles have been prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as cross-linking agent and 2,2'-azobisisobutyronitrile as initiator, in the presence of Hg(II)-1-(2-thiazolylazo)-2-naphthol complex. The separation and preconcentration characteristics of the Hg-ion-imprinted microbeads for inorganic mercury have been investigated by batch procedure. The optimal pH value for the quantitative sorption is 7. The adsorbed inorganic mercury is easily eluted by 2 mL 4M HNO(3). The adsorption capacity of the newly synthesized Hg ion-imprinted microbeads is 32.0 micromol g(-1) for dry copolymer. The selectivity of the copolymer toward inorganic mercury (Hg(II)) ion is confirmed through the comparison of the competitive adsorptions of Cd(II), Co(II), Cu(II), Ni(II), Pb(II), Zn(II)) and high values of the selectivity and distribution coefficients have been calculated. Experiments performed for selective determination of inorganic mercury in mineral and sea waters showed that the interfering matrix does not influence the extraction efficiency of Hg ion-imprinted microbeads. The detection limit for inorganic mercury is 0.006 microg L(-1) (3 sigma), determined by cold vapor atomic adsorption spectrometry. The relative standard deviation varied in the range 5-9 % at 0.02-1 microg L(-1) Hg levels. The new Hg-ion-imprinted microbeads have been tested and applied for the speciation of Hg in river and mineral waters: inorganic mercury has been determined selectively in nondigested sample, while total mercury e.g. sum of inorganic and methylmercury, has been determined in digested sample.

Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads.

Ion-imprinted polymer (IIP) particles are prepared by copolymerization of methacrylic acid as monomer, trimethylolpropane trimethacrylate as crosslinking agent and 2,2'-azo-bis-isobutyronitrile as initiator in the presence of Cu(II), a Cu(II)-4-(2-pyridylazo)resorcinol (Cu(II)-PAR) complex, and PAR only. A batch procedure is used for the determination of the characteristics of the Cu(II) solid phase extraction from the IIP produced. The results obtained show that the Cu(II)-PAR IIP has the greatest adsorption capacity (37.4 micromol g(-1) of dry copolymer) among the IIPs investigated. The optimal pH value for the quantitative preconcentration is 7, and full desorption is achieved by 1 M HNO(3). The selectivity coefficients (S(Cu/Me)) for Me=Ni(II), Co(II) are 45.0 and 38.5, respectively. It is established that Cu(II)-PAR IIPs can be used repeatedly without a considerable adsorption capacity loss. The determination of Cu(II) ions in seawater shows that the interfering matrix does not influence the preconcentration and selectivity values of the Cu(II)-PAR IIPs. The detection and quantification limits are 0.001 micromol L(-1) (3sigma) and 0.003 micromol L(-1) (6sigma), respectively.

Self-assembly, antipolyelectrolyte effect, and nonbiofouling properties of polyzwitterions.

An explanation of the unique nonbiofouling properties of polyzwitterions (PZ) is proposed [in this paper, the term "polyzwitterion" is preferred to "polybetain"]. The existence of an osmotic component of the driving force of the antipolyelectrolyte effect (APE) and the parameters governing this phenomenon are quantitatively established. The correlation between this effect, which is specific of PZ only, and the PZ nonbiofouling properties is grounded.