Radiographically Apparent Acetabular Sourcil Landmarks Are Created by Comparable Regions of the Pelvis With Extraarticular Bone Variably Confounding Estimates of Joint Coverage.

BACKGROUND: The severity of hip dysplasia is characterized by radiographic measurements that require user definition of the acetabular sourcil edge, a bony landmark for which the corresponding three-dimensional (3D) anatomy is not well defined in any imaging plane. QUESTIONS/PURPOSES: To use digitally reconstructed radiographs to determine: (1) What 3D anatomy is contributing to the "acetabular sourcil" location used to make lateral center-edge angle (LCEA) and anterior center-edge angle (ACEA) measurements in standing AP and false-profile radiographic views, respectively? (2) How do intraobserver and interobserver agreement in LCEA and ACEA translate into agreement of the 3D anatomy being evaluated? (3) How distinct are regions around the acetabular rim circumference that are evaluated by LCEA and ACEA measurements on radiographs? METHODS: Between January 2018 and May 2019, 72 patients were indicated for periacetabular osteotomy to treat hip dysplasia or acetabular retroversion at our institution. From these patients, a series of 10 patients were identified of the first 12 patients in 2018 who were treated with periacetabular osteotomy, excluding two with missing or low-quality clinical imaging. A second series of 10 patients was identified of the first 11 patients in 2019 who were treated with periacetabular osteotomy and concurrent hip arthroscopy, excluding one who was missing clinical imaging. Pelvis and femoral bone surface models were generated from CT scans of these two series of 10 patients. There were 15 female and five male patients, with a median patient age of 18 years (IQR 17 to 23 years), a preoperative LCEA of 22° (IQR 18° to 24°), and a preoperative ACEA of 23° (IQR 18° to 27°). Exclusion criteria included missing preoperative CT or standard clinical radiographic imaging or severe joint incongruity. To address our first study question, digitally reconstructed radiographs matching each patient's standing AP and false-profile clinical radiographs were created from the segmented CT volumes. A board-certified orthopaedic surgeon and three trained researchers measured LCEA and ACEA on the digitally reconstructed radiographs, and the selected sourcil points were projected back into coordinates in the 3D anatomic space. To address our second study question, intraobserver and interobserver agreement in radiographic coverage angles were related to variations in 3D coordinates of the selected bony anatomy. Lastly, to address our third study question, 3D locations around the acetabular rim identified as contributing to the lateral and anterior sourcil points were summarized across patients in a clockface coordinate system, and statistical analysis of the "time" separating the 3D acetabular contributions of the sourcil edges was performed. RESULTS: The 3D anatomy contributing to the lateral sourcil was a variable length (27 mm [IQR 15 to 34 mm]) span of the laterosuperior acetabular edges, with contributions by the anterior inferior iliac spine in 35% (7 of 20) of hips. The anterior sourcil reflected a 28-mm (IQR 25 to 31 mm) span of bone from the medial ilium (posterior-medial to the anterior-inferior iliac spine and anterior-lateral to the arcuate line) to the anterior and lateral edges of the acetabulum. Interobserver variability was good for LCEA (intraclass correlation coefficient [ICC] 0.82 to 0.83) and moderate to good for ACEA (ICC 0.73 to 0.79), whereas the agreement in identified 3D sourcil locations varied widely (ICC 0.32 to 0.95). The acetabular edge of the 3D anatomy contributing to the anterior sourcil overlapped the circumferential range of the acetabular rim contributing to the lateral sourcil. CONCLUSION: Projection of two-dimensional radiographic landmarks contributing to the diagnosis of structural hip deformity into 3D allowed for the identification of the overlapping bony anatomy contributing to radiographically visible anterior and lateral sourcil edges. CLINICAL RELEVANCE: This work leveraging digitally reconstructed radiographs and 3D pelvis anatomy has found that bone outside the joint contributes to the radiographic appearance of the sourcil and may variably confound estimates of joint coverage. Furthermore, the substantial overlap between the acetabular bone contributing to measurement of the LCEA and ACEA would indicate that these angles measure similar acetabular deformity, and that additional measures are needed to assess anterior coverage independent of lateral coverage.

The Effects of Residual Femoral Deformity on Computed Contact Mechanics in Patients Treated With In Situ Fixation for Slipped Capital Femoral Epiphysis.

OBJECTIVE: In situ fixation for treatment of slipped capital femoral epiphysis (SCFE) can stabilize the epiphysis and prevent further joint deformation but often leaves residual deformity that may adversely affect intra-articular contact mechanics. The purpose of this study was to investigate the relationship between residual deformity and contact mechanics in the post-SCFE hip. METHODS: Patient-specific hip models were created for 19 patients with SCFE treated with in situ fixation. For each model, discrete element analysis was used to compute cumulative acetabular and femoral contact stress exposure during a walking gait cycle. Slip severity was evaluated for each patient using the two-dimensional Southwick angle and a novel three-dimensional (3D) assessment of multiplanar femoral deformity (3D slip angle). RESULTS: Of the SCFE cases, 2/7 mild (Southwick angle ≤30 degrees) had peak cumulative femoral exposures equivalent to that of severe (Southwick angle ≥60 degrees) cases. Severe SCFE cases had higher peak ( P = 0.015) and mean ( P = 0.028) femoral contact stress exposure and lower cumulative femoral contact area ( P = 0.003) than mild (Southwick angle ≤30 degrees) SCFE cases. Mean femoral contact stress exposure was also higher in severe SCFE cases than in moderate SCFE cases ( P = 0.027). Acetabular and femoral contact mechanics metrics typically demonstrated stronger correlations with 3D slip angle than two-dimensional Southwick angle. CONCLUSIONS: Increased slip severity adversely impacts intra-articular femoral contact mechanics. Contact mechanics metrics demonstrate higher correlations with 3D slip angle, indicating that this novel measurement may better describe global deformity and its relationship to intra-articular mechanics; however, the modest strength of these correlations may also imply that global impingement-generating deformity is not the primary factor driving contact mechanics in the post-SCFE hip. CLINICAL RELEVANCE: Greater slip severity adversely impacts contact mechanics in the post-SCFE hip. However, focal regions of high contact stress were seen even in mild SCFE deformities, suggesting some type of deformity correction should be considered even for mild slips to alleviate secondary impingement, address focal incongruities, and reduce osteoarthritis development/progression.

Three-dimensional assessment of subchondral arc and hip joint coverage angles in the asymptomatic young adult hip.

The primary objective of this study was to develop a custom algorithm to assess three-dimensional (3D) acetabular coverage of the femoral head based on surface models generated from computed tomography (CT) imaging. The secondary objective was to apply this algorithm to asymptomatic young adult hip joints to assess the regional 3D acetabular coverage variability and understand how these novel 3D metrics relate to traditional two-dimensional (2D) radiographic measurements of coverage. The algorithm developed automatically identifies the lateral- and medial-most edges of the acetabular lunate at one-degree intervals around the acetabular rim based on local radius of curvature. The acetabular edges and the center of a best-fit sphere to the femoral head are then used to compute the mean 3D subchondral arc angles and hip joint coverage angles in five acetabular octants. This algorithm was applied to hip models generated from pelvis/hip CT imaging or abdomen/pelvis CT angiograms of 50 patients between 17 and 25 years of age who had no history of congenital or developmental hip pathology, neuromuscular conditions, or bilateral pelvic and/or femoral fractures. Corresponding 2D acetabular coverage measures of lateral center edge angle (LCEA) and acetabular arc angle (AAA) were assessed on the patients' clinical or digitally reconstructed radiographs. The 3D subchondral arc angle in the superior region (58.0 [54.6-64.8] degrees) was significantly higher (p < 0.001) than all other acetabular subregions. The 3D hip joint coverage angle in the superior region (26.2 [20.7-28.5] degrees) was also significantly higher (p < 0.001) than all other acetabular subregions. 3D superior hip joint coverage angle demonstrated the strongest correlation with 2D LCEA (r = 0.649, p < 0.001), while 3D superior-anterior subchondral arc angle demonstrated the strongest correlation with 2D AAA (r = 0.718, p < 0.001). The 3D coverage metrics in the remaining acetabular regions did not strongly correlate with typical 2D radiographic measures. The discrepancy between standard 2D measures of radiographic acetabular coverage and actual 3D coverage identified on advanced imaging indicates potential discord between anatomic coverage and the standard clinical measures of coverage on 2D imaging. As 2D measurement of acetabular coverage is increasingly used to guide surgical decision-making to address acetabular deformities, this work would suggest that 3D measures of acetabular coverage may be important to help discriminate local coverage deficiencies, avoid inconsistencies resulting from differences in radiographic measurement techniques, and provide a better understanding of acetabular coverage in the hip joint, potentially altering surgical planning and guiding surgical technique.

Altered Ulnar Variance With Full-Body Weight-bearing During Handstands With Upper Extremity Weight-bearing CT.

PURPOSE: Ulnar variance (UV) is a radiographic measurement relating the articular surface heights of the distal radius and ulna. Abnormal UV increases the risk for wrist pathology; however, it only provides a static measurement of an inherently dynamic bony relationship that changes with wrist position and loading. The purpose of this study was to investigate how full-body weight-bearing affects UV using weight-bearing computed tomography (WBCT). METHODS: Ten gymnasts completed two 45-second scans inside a WBCT machine while performing a handstand on a flat platform (H) and parallettes (P). A non-weight-bearing CT scan was collected to match clinical practice (N). Differences in UV between weight-bearing conditions were evaluated separately for dominant and nondominant sides, and then, UV was compared between weight-bearing conditions on pooled dominant/nondominant data. RESULTS: Pooled analyses comparing weight-bearing conditions revealed a significant increase in UV for H versus N (0.58 mm) and P versus N (1.00 mm), but no significant change in UV for H versus P (0.43 mm). Significant differences in UV were detected for H versus N, P versus N, and H versus P for dominant and nondominant extremities. The change from N to H was significantly greater in the dominant versus nondominant side, but greater in the nondominant side from N to P. CONCLUSIONS: Ulnar variance changed with the application of load and position of the wrist. Differences in UV were found between dominant and nondominant extremities. CLINICAL RELEVANCE: Upper extremity loading patterns are affected by hand dominance as defined by a cartwheel and suggest skeletal consequences from repetitive load on a dominantly used wrist. Although statistically significant, subtle changes detected in this investigational study do not necessarily bear clinical significance. Future WBCT research can lead to improved diagnostic measures for wrist pathologies affected by active loading and rotational wrist behavior.

Patient Age and Hip Morphology Alter Joint Mechanics in Computational Models of Patients With Hip Dysplasia.

BACKGROUND: Older patients (> 30 years) undergoing periacetabular osteotomy (PAO) to delay THA often have inferior patient-reported outcomes than younger adult patients (< 30 years). It is unclear how patient age affects hip morphology, mechanics, or patient-reported outcome scores. QUESTIONS/PURPOSES: (1) Is increased patient age associated with computationally derived elevations in joint contact stresses? (2) Does hip shape affect computationally derived joint contact stresses? (3) Do computationally derived joint contact stresses correlate with visual analog scale (VAS) pain scores evaluated at rest in the clinic at a minimum of 1 year after surgery? METHODS: A minimum of 1 year of clinical followup was required for inclusion. The first 15 patients younger than 30 years of age, and the first 15 patients older than 30 years of age, who underwent PAO for treatment of classic dysplasia (lateral center-edge angle < 25°) who met the minimum followup were selected from a historical database of patients treated by a single surgeon between April 2003 and April 2010. The older cohort consisted of 14 females and one male with a median age of 41 years (range, 31-54 years). The younger cohort consisted of 10 females and five males with a median age of 19 years (range, 12-29 years). Median followup for the older than 30 years versus younger than 30 years cohort was 19 months (range, 12-37 months) versus 24 months (range, 13-38 months). Pre- and postoperative hip models were created from CT scans for discrete element analysis (DEA) contact stress computations. DEA treats contacting articular surfaces as rigid bodies (bones) separated by a bed of compressive springs (cartilage), the deformation of which governs computation of joint contact stresses. This technique greatly simplifies computational complexity compared with other modeling techniques, which permits patient-specific modeling of larger cohorts. Articular surface shape was assessed by total root mean square deviation of each patient's acetabular and femoral cartilage geometry from sphericity. Preoperative and postoperative VAS pain scores evaluated at rest in the clinic were correlated with computed contact stresses. RESULTS: Patients older than 30 years had higher predicted median peak contact stress preoperatively (13 MPa [range, 9-23 MPa; 95% confidence interval {CI}, 11-15 MPa] versus 7 MPa [range, 6-14 MPa; 95% CI, 6-8 MPa], p < 0.001) but not postoperatively (10 MPa [range, 6-18 MPa; 95% CI, 8-12 MPa] versus 8 MPa [range, 6-13 MPa; 95% CI, 7-9 MPa], p = 0.137). Deviation from acetabular sphericity positively correlated with preoperative peak contact stress (R = 0.326, p = 0.002) and was greater in the older cohort (0.9 mm [range, 0.8-1.5 mm; 95% CI, 0.8-1.0 mm] versus 0.8 mm [range, 0.6-0.9 mm; 95% CI, 0.7-0.9 mm], p = 0.014). Peak preoperative contact stress did not correlate with preoperative VAS pain score (R = 0.072, p = 0.229), and no correlation was found between change in peak contact stress and change in VAS score (R = 0.019, p = 0.280). CONCLUSIONS: Patients over the age of 30 years with dysplasia had less spherical acetabula and higher predicted preoperative contact stress than those younger than 30 years of age. Future studies with larger numbers of patients and longer term functional outcomes will be needed to determine the role of altered mechanics in the long-term success of PAO varying with patient age. CLINICAL RELEVANCE: These findings suggest that long-term exposure to abnormal joint loading may have deleterious effects on the hip geometry and may render the joint less amenable to joint preservation procedures. Given the lack of a direct relationship between mechanics and pain, orthopaedic surgeons should be particularly critical when evaluating three-dimensional dysplastic hip morphology in patients older than 30 years of age to ensure beneficial joint reorientation.

Screw fixation of the syndesmosis alters joint contact characteristics in an axially loaded cadaveric model.

BACKGROUND: The purpose of this study was to quantify the effects of rigid syndesmotic fixation on functional talar position and cartilage contact mechanics. METHODS: Twelve below-knee cadaveric specimens with an intact distal syndesmosis were mechanically loaded in four flexion positions (20° plantar flexion, 10° plantar flexion, neutral, 10° dorsiflexion) with zero, one, or two 3.5-mm syndesmotic screws. Rigid clusters of reflective markers were used to track bony movement and ankle-specific pressure sensors were used to measure talar dome and medial/lateral gutter contact mechanics. RESULTS: Screw fixation caused negligible anterior and inferior shifts of the talus within the mortise. Relative to no fixation, mean peak contact pressure decreased by 6%-32% on the talar dome and increased 2.4- to 6.6-fold in the medial and lateral gutters, respectively, depending on ankle position and number of screws. CONCLUSIONS: Two-way ANOVA indicated syndesmotic screw fixation significantly increased contact pressure in the medial/lateral gutters and decreased talar dome contact pressure while minimally altering talar position.

Changes in Joint Contact Mechanics in a Large Quadrupedal Animal Model After Partial Meniscectomy and a Focal Cartilage Injury.

Acute mechanical damage and the resulting joint contact abnormalities are central to the initiation and progression of post-traumatic osteoarthritis (PTOA). Study of PTOA is typically performed in vivo with replicate animals using artificially induced injury features. The goal of this work was to measure changes in a joint contact stress in the knee of a large quadruped after creation of a clinically realistic overload injury and a focal cartilage defect. Whole-joint overload was achieved by excising a 5-mm wedge of the anterior medial meniscus. Focal cartilage defects were created using a custom pneumatic impact gun specifically developed and mechanically characterized for this work. To evaluate the effect of these injuries on joint contact mechanics, Tekscan (Tekscan, Inc., South Boston, MA) measurements were obtained pre-operatively, postmeniscectomy, and postimpact (1.2-J) in a nonrandomized group of axially loaded cadaveric sheep knees. Postmeniscectomy, peak contact stress in the medial compartment is increased by 71% (p = 0.03) and contact area is decreased by 35% (p = 0.001); the center of pressure (CoP) shifted toward the cruciate ligaments in both the medial (p = 0.004) and lateral (p = 0.03) compartments. The creation of a cartilage defect did not significantly change any aspect of contact mechanics measured in the meniscectomized knee. This work characterizes the mechanical environment present in a quadrupedal animal knee joint after two methods to reproducibly induce joint injury features that lead to PTOA.

The effect of glenoid component version and humeral polyethylene liner rotation on subluxation and impingement in reverse shoulder arthroplasty.

BACKGROUND: A previously validated finite element modeling approach was used to determine how changes in glenoid component version and polyethylene liner rotation within the humeral component affect the arm abduction angle at which impingement between the inferior glenoid and the polyethylene liner occurs as well as the amount of subluxation generated by that impingement. MATERIALS AND METHODS: Five glenoid component versions (5° anteversion; neutral; 5°, 10°, and 20° retroversion) and 7 polyethylene liner rotations (20° and 10° anterior; neutral; 10°, 20°, 30°, and 40° posterior) were considered, resulting in 35 different clinically representative models. The humerus was internally and externally rotated and extended and flexed, and the resulting impingement and subluxation were measured. To further analyze more global trends and to identify implantations least prone to subluxation, polyethylene liner rotation was additionally varied in coarser 30° increments across the entire 360° range. RESULTS: All subluxation caused by impingement occurred during external rotation and extension, and external rotation produced nearly 10-fold more subluxation than extension. Neutral glenoid component version was associated with the least amount of subluxation for all polyethylene liner rotations. Posteriorly rotated polyethylene liners, which place the thick inferior region of the component away from the scapula, produced the least amount of subluxation. The 90° and 120° posterior liner rotations produced no subluxation, whereas the 30° and 60° anterior liner rotations produced the greatest amount of subluxation. CONCLUSION: These results indicate that rotating modern radially asymmetric humeral polyethylene liners posteriorly can reduce the risk of subluxation leading to dislocation and increase external rotation range of motion.

Delayed administration of recombinant human parathyroid hormone improves early biomechanical strength in a rat rotator cuff repair model.

BACKGROUND: Despite advances in intraoperative techniques, rotator cuff repairs frequently do not heal. Recombinant human parathyroid hormone (rhPTH) has been shown to improve healing at the tendon-to-bone interface in an established acute rat rotator cuff repair model. We hypothesized that administration of rhPTH beginning on postoperative day 7 would result in improved early load to failure after acute rotator cuff repair in an established rat model. METHODS: Acute rotator cuff repairs were performed in 108 male Sprague-Dawley rats. Fifty-four rats received daily injections of rhPTH beginning on postoperative day 7 until euthanasia or a maximum of 12 weeks postoperatively. The remaining 54 rats received no injections and served as the control group. Animals were euthanized at 2 and 16 weeks postoperatively and evaluated by gross inspection, biomechanical testing, and histologic analysis. RESULTS: At 2 weeks postoperatively, rats treated with rhPTH demonstrated significantly higher load to failure than controls (10.9 vs. 5.2 N; P = .003). No difference in load to failure was found between the 2 groups at 16 weeks postoperatively, although control repairs more frequently failed at the tendon-to-bone interface (45.5% vs. 22.7%; P = .111). Blood vessel density appeared equivalent between the 2 groups at both time points, but increased intracellular and extracellular vascular endothelial growth factor expression was noted in the rhPTH-treated group at 2 weeks. CONCLUSIONS: Delayed daily administration of rhPTH resulted in increased early load to failure and equivalent blood vessel density in an acute rotator cuff repair model.

Injury risk to extraosseous knee vasculature during osteotomies: a cadaveric study with CT and dissection analysis.

BACKGROUND: Realignment osteotomies about the knee may be performed as distal femoral or proximal tibial osteotomies; both may be performed either on the medial or lateral sides of the knee, in closing- or opening-wedge fashion. Although rare, injury to neurovascular structures may occur, and the proximity of the vascular structures to the osteotomy saw cuts has been incompletely characterized. QUESTIONS/PURPOSES: We performed a cadaver study to assess the risk of vascular injury in patients undergoing realignment osteotomies by (1) quantifying the distances between osteotomy saw cuts and blood vessels using three-dimensional CT reconstruction after distal femoral and proximal tibial osteotomies; and (2) qualitatively describing the small- and medium-sized vasculature around the knee, to provide the link between the CT analysis and wedge incision measures, and better show the potential extraosseous supply to the regions investigated. METHODS: Twelve human cadaveric knees were injected with a latex and barium sulfate suspension into the superficial femoral artery. Each specimen underwent CT to evaluate vascular perfusion and was randomized to either a lateral opening-wedge distal femoral osteotomy and medial opening-wedge proximal tibial osteotomy group, or a medial closing-wedge distal femoral osteotomy and lateral closing-wedge proximal tibial osteotomy group. Postoperatively, knees underwent CT in extension to measure the shortest distance between the osteotomies and the popliteal artery, anterior and posterior tibial arteries, and genicular arteries. Vessels between 5 mm and 10 mm from the osteotomy cut were considered in a zone of moderate risk for damage, while vessels less than 5 mm from the cut were considered in a zone of high risk for damage. Vessels more than 10 mm from the cut were not considered to be at risk. Subsequently, knees underwent dissection and chemical débridement to qualitatively describe the smaller vessels. This part of the study added visual information and gave a comprehensive overview of the vessels at risk. RESULTS: All variations of the osteotomies put at least one artery at risk. The popliteal artery was found in a risk zone for injury in two specimens during closing-wedge distal femoral osteotomy (median distance, 11.6 mm; range, 5.2-14.6 mm). The superior lateral genicular artery was in a risk zone in all the specimens during opening-wedge distal femoral osteotomy (median distance, 3.0 mm; range, 0.7-6.5 mm), and in five specimens during closing-wedge distal femoral osteotomy (median distance, 4.5 mm; range, 1.3-11.2 mm). A concomitant risk for superior medial genicular artery injury was observed in five specimens during opening-wedge distal femoral osteotomy (median distance, 8.7 mm; range, 0.8-13.9 mm) and in four specimens during closing-wedge distal femoral osteotomy (median distance, 4.1; range, 0.5-41.7 mm). The popliteal artery was in a risk zone in four specimens during opening-wedge proximal tibial osteotomy (median distance, 9.6 mm; range, 6.6-12.9 mm), and in three specimens during closing wedge proximal tibial osteotomy (median distance, 9.6 mm; range, 4.4-11 mm). The inferior medial genicular artery could be classified at risk in five specimens during opening-wedge proximal tibial osteotomy (median distance, 2.1 mm; range, 0.3-32 mm) and in five specimens during closing-wedge proximal tibial osteotomy (median distance, 5.8 mm; range, 1.4-13 mm). Furthermore, the inferior lateral genicular artery was found in a risk zone in two specimens of closing-wedge proximal tibial osteotomies (median distance, 17.4 mm; range, 8-23.3 mm). There were no differences between opening-wedge and closing-wedge distal femoral osteotomies and proximal tibial osteotomies in the vessels at risk during the procedure. After chemical débridement, knees showed abundant vascularization of the distal femur and lateral tibia, whereas the medial tibia contained few arteries. CONCLUSIONS: With the numbers available, we found that none of the osteotomy techniques performed was safer than any other in terms of the proximity of the major arterial structures and some vessels appear to be at relatively high risk during these procedures. CLINICAL RELEVANCE: This study clarifies that the genicular arteries on the opposite side of the surgical field, which cannot be seen and protected during the procedure, can be at risk of injury, particularly when the cortical hinge is compromised. Additional studies are necessary to address the potential risk of the dissection needed for plate placement and injuries related to drilling and screw placement during osteotomies around the knee.

Mechanical tradeoffs associated with glenosphere lateralization in reverse shoulder arthroplasty.

BACKGROUND: Scapular notching in reverse shoulder arthroplasty occurs in up to 97% of patients. Notching is associated with decreased strength and reduced motion and may lead to long-term failure due to polyethylene wear. Many implant systems lateralize the glenosphere to address scapular notching, but the mechanical tradeoffs of lateralization have not been rigorously evaluated. We hypothesized that lateralization would decrease bony impingement but also decrease the mechanical advantage of the deltoid. METHODS: Finite element models were created using the same implants with different amounts of glenoid lateralization: 5 mm of medialization to replicate glenoid erosion, as well as 2.5, 5, 7.5, and 10 mm of lateralization. Tests were performed with static and dynamic scapulae for motion in either the coronal or scapular plane. The angle of impingement between the scapula and the humeral polyethylene was recorded, as was the deltoid force required to elevate the arm. RESULTS: Increasing lateralization decreased impingement while increasing the deltoid force required to elevate the arm. Differences were found between the static and dynamic scapulae, with the dynamic scapula model having increased humeral adduction before impinging. The impingement angle was also substantially affected by the bony prominences on the inferior scapula, showing how individual bony anatomy can affect impingement. CONCLUSION: Lateralization is effective in increasing impingement-free range of motion but also increases the deltoid force required to perform identical tasks. In addition, impingement is determined by scapular motion, which should be included in all shoulder models.

Implications of using simplified finite element meshes to identify material parameters of articular cartilage.

The objective of this work was to determine the effects of using simplified finite element (FE) mesh geometry in the process of performing reverse iterative fitting to estimate cartilage material parameters from in situ indentation testing. Six bovine tibial osteochondral explants were indented with sequential 5 % step-strains followed by a 600 s hold while relaxation force was measured. Three sets of porous viscohyperelastic material parameters were estimated for each specimen using reverse iterative fitting of the indentation test with (1) 2D axisymmetric, (2) 3D idealized, and (3) 3D specimen-specific FE meshes. Variable material parameters were identified using the three different meshes, and there were no systematic differences, correlation to basic geometric features, nor distinct patterns of variation based on the type of mesh used. Implementing the three material parameter sets in a separate 3D FE model of 40 % compressive strain produced differences in von Mises stresses and pore pressures up to 25 % and 50 %, respectively. Accurate material parameters are crucial in any FE model, and parameter differences influenced by idealized assumptions in initial material property determination have the potential to alter subsequent FE models in unpredictable ways and hinder the interpretation of their results.

Persistently elevated joint contact stress after periacetabular osteotomy is associated with joint failure at minimum 10-year follow-up.

Periacetabular osteotomy (PAO) is a common treatment for prearthritic hip dysplasia. The goal of this investigation was to determine if computationally assessed hip contact mechanics are associated with joint failure at minimum 10-year follow-up. One hundred patients with hip dysplasia (125 hips) completed patient-reported outcomes an average of 13.8 years (range 10.0-18.0 years) after PAO. 63/125 hips were classified as having failed: 26 converted to total hip arthroplasty (THA) and 37 with significant disability indicated by modified Harris Hip Score (mHHS) ≤ 70. Differences in discrete element analysis-computed contact mechanics were compared between (1) preserved and failed hips, (2) preserved hips and hips that failed by THA, and (3) preserved hips and hips that failed by mHHS ≤ 70. Failed hips had significantly higher preoperative contact stress and exposure metrics (p < 0.001-0.009) than preserved hips. Failed hips also had significantly higher postoperative peak contact stress (p = 0.018), higher mean contact stress (p < 0.001), and smaller contact area (p = 0.044). When assessed based on type of failure, hips that failed by THA had significantly higher postoperative contact stress and exposure metrics than preserved hips (p < 0.001-0.020). In hips that failed by mHHS ≤ 70, mean postoperative contact stress exposure was significantly higher compared to preserved hips (p = 0.043). Despite improved radiographic measures of dysplasia after PAO, pathologic joint contact mechanics can persist and predict treatment failure at minimum 10 years after surgery. Operative and nonoperative techniques specifically intended to reduce harmful contact mechanics in dysplastic hips may have the potential to further improve clinical outcomes after PAO.

A New Method for Creating Impact-Induced Intra-Articular Fractures in a Rabbit Model Induces Severe Post-Traumatic Osteoarthritis.

OBJECTIVES: The objective of this work was to develop a model of intra-articular fracture (IAF) in a rabbit and document the speed and severity of degenerative joint changes after fracture fixation. METHODS: With Institutional Animal Care & Use Committee approval, impact-induced IAFs were created in the distal tibia of 16 New Zealand White rabbits. Fractures were fixed with a plate and screws. Pain and function were monitored at regular postoperative intervals with limb loading analysis. Twelve or 26 weeks after fracture, animals were euthanized for histological assessment of cartilage degeneration and micro-computed tomography analysis of bone histomorphometry. RESULTS: Eleven animals successfully completed the study. Maximum foot force in the fractured limb was 41% ± 21% lower than preoperative values ( P = 0.006) 12 weeks after fracture and remained 25% ± 13% lower ( P = 0.081) after 26 weeks. Cortical bone mineral density in micro-computed tomography images was 34% ± 13% lower 12 weeks after fracture ( P < 0.001) and remained (42% ± 8%) lower 26 weeks after fracture ( P < 0.001). Twelve weeks after fracture, Mankin scores of cartilage degeneration were significantly higher in the medial talus ( P = 0.007), lateral talus ( P < 0.001), medial tibia ( P = 0.017), and lateral tibia ( P = 0.002) of the fractured limb compared with the uninjured contralateral limb. Average Mankin scores in the talus increased from 12 to 26 weeks (5.9 ± 0.9 to 9.4 ± 0.4; P < 0.001 lateral; 5.4 ± 1.8 to 7.8 ± 2.0; P = 0.043 medial), indicating substantial and progressive joint degeneration. CONCLUSIONS: The ankle joint of the New Zealand White rabbit provides the smallest available model of impact-induced IAF that can be treated with clinically relevant techniques and replicates key features of healing and degeneration found in human patients.

Incorporating patient-specific hip orientation from weightbearing computed tomography affects discrete element analysis-computed regional joint contact mechanics in individuals treated with periacetabular osteotomy for hip dysplasia.

Computational models of the hip often omit patient-specific functional orientation when placing imaging-derived bony geometry into anatomic landmark-based coordinate systems for application of joint loading schemes. The purpose of this study was to determine if this omission meaningfully alters computed contact mechanics. Discrete element analysis models were created from non-weightbearing (NWB) clinical CT scans of 10 hip dysplasia patients (11 hips) and oriented in the International Society of Biomechanics (ISB) coordinate system (NWB-ISB). Three additional models were generated for each hip by adding patient-specific stance information obtained via weightbearing CT (WBCT) to each ISB-oriented model: (1) patient-specific sagittal tilt added (WBCT-sagittal), (2) coronal and axial rotation from optical motion capture added to (1; WBCT-combo), and (3) WBCT-derived axial, sagittal, and coronal rotation added to (1; WBCT-original). Identical gait cycle loading was applied to all models for a given hip, and computed contact stress and contact area were compared between model initialization techniques. Addition of sagittal tilt did not significantly change whole-joint peak (p = 0.922) or mean (p = 0.871) contact stress or contact area (p = 0.638). Inclusion of motion-captured coronal and axial rotation (WBCT-combo) decreased peak contact stress (p = 0.014) and slightly increased average contact area (p = 0.071) from WBCT-sagittal models. Including all WBCT-derived rotations (WBCT-original) further reduced computed peak contact stress (p = 0.001) and significantly increased contact area (p = 0.001). Variably significant differences (p = 0.001-1.0) in patient-specific acetabular subregion mechanics indicate the importance of functional orientation incorporation for modeling applications in which local contact mechanics are of interest.

Activation of Heme Metabolism Promotes Tissue Health After Intraarticular Injury or Surgical Exposure.

Posttraumatic osteoarthritis (PTOA) is a well-recognized public health burden without any disease modifying treatment. This occurs despite noted advances in surgical care in the past 50 years. Mitochondrial oxidative damage pathways initiate PTOA after severe injuries like intraarticular fracture that often require surgery and contribute to PTOA after less severe injuries that may or may not require surgery like meniscal injuries. When considering the mitochondrial and redox environment of the injured joint, we hypothesized that activation of heme metabolism, previously associated with healing in many settings, would cause prototypic mitochondrial reprogramming effects in cartilage ideally suited for use at the time of injury repair. Activation of heme metabolism can be accomplished through the gasotransmitter carbon monoxide (CO), which activates hemeoxygenase-1 (HO1) and subsequent heme metabolism. In this study, we employed unique carbon monoxide (CO)-containing foam (COF) to stimulate heme metabolism and restore chondrocyte oxygen metabolism in vitro and in vivo . Doxycycline-inducible, chondrocyte-specific HO1 overexpressing transgenic mice show similar mitochondrial reprogramming after induction compared to COF. CO is retained at least 24 h after COF injection into stifle joints and induces sustained increases in heme metabolism. Lastly, intraarticular injection of COF causes key redox outcomes without any adverse safety outcomes in rabbit stifle joints ex vivo and in vivo . We propose that activation of heme metabolism is an ideal adjuvant to trauma care that replenishes chondrocyte mitochondrial metabolism and restores redox homeostasis.

Maximizing safety in screw placement for posterior facet fixation in calcaneus fractures: a cadaveric radio-anatomical study.

BACKGROUND: Successful screw fixation of reduced posterior facet fragments to the unexposed, nondisplaced sustentaculum tali avoids breaching the subtalar joint or disrupting surrounding soft tissue structures. Safe passage for screw fixation through this narrow bony corridor has not been rigorously defined. METHODS: Computed tomography scans of 8 cadaveric feet were digitally reconstructed in 3-D; 3.5-mm-diameter screws were simulated, aiming at the center of the sustentaculum tali from 5 locations (0%, 25%, 50%, 75%, and 100%) along the posterolateral facet joint. The range of entry points, screw paths trajectories, and screw lengths that did not breach the subtalar joint or the medial calcaneal cortex were evaluated. RESULTS: To prevent violation of the subtalar joint or the medial calcaneal cortex while reaching the center of the sustentaculum tali, screws must be inserted at least 5 mm below the joint line. Screw placement 15 ± 1 mm below the posterior facet measured perpendicular to the joint line provided the widest safe corridor with the trajectory of the ranges from 6 to 36 degrees parallel to the joint depending on the location along the posterior facet and 20 ± 2 degrees perpendicular to the joint at all locations. The average maximal length of screws placed at the ideal entry points ranged from 44 to 46 mm, longest at the 100% location and shortest at the 25% location. CONCLUSIONS: Operative guidelines facilitating instrumentation into the sustentaculum tali have been defined applying to most calcanei, assuming the fractures are well reduced: screws, approximately 40 mm in length, should be started 15 mm below the posterior facet measured perpendicular to the joint line and aimed 20 degrees perpendicular to the joint line toward the joint and 6 to 36 degrees anteversion parallel to the joint line increasing at each position from anterior to posterior. CLINICAL RELEVANCE: The operative guidelines described in this study may assist surgeons in the placement of screws for the fixation of posterior facet fragments to the sustentaculum tali.

Tripod index: a new radiographic parameter assessing foot alignment.

BACKGROUND: No single radiographic measurement takes into account complete foot alignment. We have created the Tripod Index (TI) to allow assessment of complex foot deformities using a standing anteroposterior (AP) radiograph of the foot. We hypothesized that TI would demonstrate good intraobserver and interobserver reliability and correlate with currently accepted radiographic parameters, in both flatfoot and cavovarus foot deformities. METHODS: Three groups of patients were studied: 26 patients (30 feet) with flatfoot, 29 patients (30 feet) with cavovarus foot, and 51 patients (60 feet) without foot deformity as controls. Weight-bearing radiographs were obtained: foot AP with a hemispherical marker around the heel plus standard lateral and hindfoot alignment views. Radiographic measurements were made by 2 blinded investigators. Statistical analysis included intraclass correlation coefficients (ICCs), correlation of the TI with existing radiographic measurements using Pearson coefficients, and comparison between patient groups using analysis of variance. RESULTS: Intraobserver and interobserver ICCs of TI (0.99 and 0.98, respectively) were excellent. In the flatfoot group, TI significantly correlated with AP talonavicular coverage angle (r = 0.43), medial cuneiform-fifth metatarsal height (r = -0.59), coronal plane hindfoot alignment (r = 0.53), and clinical hindfoot alignment (r = 0.39). In the cavovarus foot group, TI correlated significantly with AP talonavicular coverage angle (r = 0.77), calcaneal pitch angle (r = 0.39), medial cuneiform-fifth metatarsal height (r = -0.65), coronal plane hindfoot alignment (r = 0.55), and clinical hindfoot alignment (r = 0.61). Statistically significant differences between flatfoot-control and cavovarus foot-control were found in TI, AP talonavicular coverage angle, lateral talo-first metatarsal angle, calcaneal pitch angle, medial cuneiform-fifth metatarsal height, coronal plane hindfoot alignment, and clinical assessment of hindfoot alignment (all with P < .001). CONCLUSION: The TI was demonstrated to be a valid and reliable radiographic measurement to quantify the magnitude of complex foot deformities when evaluating flatfoot and cavovarus foot. CLINICAL RELEVANCE: The TI may be helpful as an integrated assessment of complex foot deformities. Further clinical studies are recommended. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Finite Element Model-Computed Mechanical Behavior of Femurs with Metastatic Disease Varies Between Physiologic and Idealized Loading Simulations.

Background and objectives: Femurs affected by metastatic bone disease (MBD) frequently undergo surgery to prevent impending pathologic fractures due to clinician-perceived increases in fracture risk. Finite element (FE) models can provide more objective assessments of fracture risk. However, FE models of femurs with MBD have implemented strain- and strength-based estimates of fracture risk under a wide variety of loading configurations, and "physiologic" loading models typically simulate a single abductor force. Due to these variations, it is currently difficult to interpret mechanical fracture risk results across studies of femoral MBD. Our aims were to evaluate (1) differences in mechanical behavior between idealized loading configurations and those incorporating physiologic muscle forces, and (2) differences in the rankings of mechanical behavior between different loading configurations, in FE simulations to predict fracture risk in femurs with MBD. Methods: We evaluated 9 different patient-specific FE loading simulations for a cohort of 54 MBD femurs: strain outcome simulations-physiologic (normal walking [NW], stair ascent [SA], stumbling), and joint contact only (NW contact force, excluding muscle forces); strength outcome simulations-physiologic (NW, SA), joint contact only, offset torsion, and sideways fall. Tensile principal strain and femur strength were compared between simulations using statistical analyses. Results: Tensile principal strain was 26% higher (R 2 = 0.719, P < .001) and femur strength was 4% lower (R 2 = 0.984, P < .001) in simulations excluding physiologic muscle forces. Rankings of the mechanical predictions were correlated between the strain outcome simulations (ρ = 0.723 to 0.990, P < .001), and between strength outcome simulations (ρ = 0.524 to 0.984, P < .001). Conclusions: Overall, simulations incorporating physiologic muscle forces affected local strain outcomes more than global strength outcomes. Absolute values of strain and strength computed using idealized (no muscle forces) and physiologic loading configurations should be used within the appropriate context when interpreting fracture risk in femurs with MBD.

Joint contact stress improves in dysplastic hips after periacetabular osteotomy but remains higher than in normal hips.

AIM: The purpose of this study was to use computational modeling to determine if surgical correction of hip dysplasia restores hip contact mechanics to those of asymptomatic, radiographically normal hips. METHODS: Discrete element analysis (DEA) was used to compute joint contact stresses during the stance phase of normal walking gait for 10 individuals with radiographically normal, asymptomatic hips and 10 age- and weight-matched patients with acetabular dysplasia who underwent periacetabular osteotomy (PAO). RESULTS: Mean and peak contact stresses were higher (p < 0.001 and p = 0.036, respectively) in the dysplastic hips than in the matched normal hips. PAO normalised standard radiographic measurements and medialised the location of computed contact stress within the joint. Mean contact stress computed in dysplastic hips throughout the stance phase of gait (median 5.5 MPa, [IQR 3.9-6.1 MPa]) did not significantly decrease after PAO (3.7 MPa, [IQR 3.2-4.8]; p = 0.109) and remained significantly (p < 0.001) elevated compared to radiographically normal hips (2.4 MPa, [IQR 2.2-2.8 MPa]). Peak contact stress demonstrated a similar trend. Joint contact area during the stance phase of gait in the dysplastic hips increased significantly (p = 0.036) after PAO from 395 mm2 (IQR 378-496 mm2) to 595 mm2 (IQR 474-660 mm2), but remained significantly smaller (p = 0.001) than that for radiographically normal hips (median 1120 mm2, IQR 853-1444 mm2). CONCLUSIONS: While contact mechanics in dysplastic hips more closely resembled those of normal hips after PAO, the elevated contact stresses and smaller contact areas remaining after PAO indicate ongoing mechanical abnormalities should be expected even after radiographically successful surgical correction.