ABSTRACT
Organic π-conjugated semiconductors (OCSs) have recently emerged as a promising alternative to traditional inorganic materials for photocatalysis. However, the aggregation of OCSs in photocatalytic aqueous solution caused by self-assembly, which closely relates to the photocatalytic activity, has not yet been studied. Here, the relationship between the aggregation of 4,7-Bis(thiophen-2-yl) benzothiadiazole (TBT) and the photocatalytic activity was systematically investigated by introducing and varying the position of methyl side chains on the two peripheral thiophene units. Experimental and theoretical results indicated that the introduction of -CH3 group at the 3-position of TBT resulted in the smallest size and best crystallinity of aggregates compared to that of TBT, 4- and 5-positions. As a result, TBT-3 exhibited an excellent photocatalytic activity towards H2 evolution, ascribed to the shorten charge carrier transport distance and solid long-range order. These results suggest the important role of aggregation behavior of OCSs for efficient photocatalysis.
ABSTRACT
The synthesis of π-conjugated polymers via an environmentally friendly procedure is generally challenging. Herein, we describe the synthesis of divanillin-based polyazomethines, which are derived from a potentially bio-based monomer. The polymerization is performed in 5 min under microwave irradiation without any metallic catalyst, with water as the only by-product. The vanillin-based polyazomethines were characterized by SEC, TGA, and UV-Vis spectroscopy. Model compounds were designed and characterized by X-ray diffraction and UV-Vis spectroscopy. The structure/properties study of vanillin-based azomethines used as models allowed us to unequivocally confirm the E configuration and to highlight the cross-conjugated nature of divanillin-based polymers.
Subject(s)
Benzaldehydes , Polymers , Benzaldehydes/chemistry , Catalysis , Polymerization , Polymers/chemistryABSTRACT
The presence of excited-states and charge-separated species was identified through UV and visible laser pump and visible/near-infrared probe femtosecond transient absorption spectroscopy in spin coated films of poly[N-9â³-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) nanoparticles and mesoparticles. Optical gain in the mesoparticle films is observed after excitation at both 400 and 610 nm. In the mesoparticle film, charge generation after UV excitation appears after around 50 ps, but little is observed after visible pump excitation. In the nanoparticle film, as for a uniform film of the pure polymer, charge formation was efficiently induced by UV excitation pump, while excitation of the low energetic absorption states (at 610 nm) induces in the nanoparticle film a large optical gain region reducing the charge formation efficiency. It is proposed that the different intermolecular interactions and molecular order within the nanoparticles and mesoparticles are responsible for their markedly different photophysical behavior. These results therefore demonstrate the possibility of a hitherto unexplored route to stimulated emission in a conjugated polymer that has relatively undemanding film preparation requirements.
Subject(s)
Carbazoles/chemistry , Nanoparticles/chemistry , Polymers/chemistry , Sulfur Compounds/chemistry , SemiconductorsABSTRACT
Assembling ultrahigh-molecular-weight (UHMW) block copolymers (BCPs) in rapid time scales is perceived as a grand challenge in polymer science due to slow kinetics. Through surface engineering and identifying a nonvolatile solvent (propylene glycol methyl ether acetate, PGMEA), we showcase the impressive ability of a series of lamellar poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) BCPs to self-assemble directly after spin-coating. In particular, we show the formation of large-period (≈111 nm) lamellar structures from a neat UHMW PS-b-P2VP BCP. The significant influence of solvent-polymer solubility parameters are explored to enhance the polymer chain mobility. After optimization using solvent vapor annealing, increased feature order of ultralarge-period PS-b-P2VP BCP patterns in 1 h is achieved. Isolated metallic and dielectric features are also demonstrated to exemplify the promise that large BCP periods offer for functional applications. The methods described in this article center on industry-compatible patterning schemes, solvents, and deposition techniques. Thus, our straightforward UHMW BCP strategy potentially paves a viable and practical path forward for large-scale integration in various sectors, e.g., photonic band gaps, polarizers, and membranes that demand ultralarge period sizes.
ABSTRACT
An approach providing cation-selective poly-(3,4-ethylenedioxythiophene)(PEDOT):polyelectrolyte-mixed conductors is presented in this communication based on the structural modification of this ambivalent (ionic and electronic conductive) polymer complex. First, an 18-crown-6 moiety is integrated into the styrene sulfonate monomer structure as a specific metal cation scavenger particularly targeting K+ versus Na+ detection. This newly functionalized monomer is characterized by 1 H NMR titration to evaluate the ion selectivity. Aqueous PEDOT dispersion inks containing the polymeric ion-selective moieties are designed and their electrical and electrochemical properties analyzed. These biocompatible inks are the first proof-of-concept step towards ion selectivity in view of their interfacing with biological cells and microorgans of interest in the field of biosensors and physiology.
Subject(s)
Polymers/chemistry , Potassium/chemistry , Electric Conductivity , Ions/chemistry , Molecular Structure , Polymers/chemical synthesisABSTRACT
New inorganic pigments with intense and saturated coloration have been prepared by a solid-state route and exhibit a large color scale from magenta to yellow. Indeed, yellow and magenta are two of the three subtractive model's colors with wide application in printing or displays as e-book readers. To develop yellow and magenta hue, we focused on cobalt- and nickel-based orthophosphates thanks to the chemical stability, low density, low price, and easy preparation of such a pigment class. All of these orthophosphates crystallize with the well-known olivine-type structure (orthorhombic Pnma space group) where transition metals are stabilized in a distorted octahedral site. This paper deals with the optical absorption properties of various orthophosphates, the correlations with structural features, and their colorimetric parameters (in L*a*b* color space). The LiCo1- xMg xPO4 series show near-magenta color with tunable luminosity, while the LiNiPO4 compound exhibits a frank yellow coloration. Co2+ (4T1) and Ni2+ (4A2) chromophore ions occupy a more or less distorted octahedral site, leading to tuning of the intensity of the d-d electronic transitions in the visible and near-IR ranges and providing a subtractive color scale; i.e., a LiCo1- xNi xPO4 solid solution possesses a very rich panel of colors between the two yellow and magenta extremes. It is worth noting that the crystal-field splitting and B Racah parameter have been estimated in a first approximation on the basis of the Tanabe-Sugano diagram and lead to the conclusion of a slightly higher crystal-field splitting of around 0.9 eV for Ni2+ ions and similar ß covalent parameters, despite the same crystallographic sites of both of these transition metals.
ABSTRACT
3-Miktoarm star terpolymer architecture (3µ-ABC), consisting of three dissimilar polymer chains, A, B, and C connected at a junction point, provides a unique opportunity in the design of complex nanoscale patterns such as Archimedean tilings that are not accessible from linear ABC terpolymers. In this work, the synthesis and the self-assembly of 3-miktoarm star terpolymers, namely, polystyrene-arm-poly(2-vinylpyridine)-arm-polyisoprene (3µ-SPI) into Archimedean tiling patterns is described. Several 3µ-SPI terpolymers are produced via a mid-functional PS-b-P2VP, synthesized by sequential anionic polymerization, using a 1,1-diphenylethylene bearing a tert-butyldimethylsilyl-protected hydroxyl functionality as a core molecule. PI arms with different sizes are then linked to the deprotected hydroxyl function of the core molecule via a Steglich esterification. Solvent-annealed 3µ-SPI thin films exhibit nanoscale prisms arranged into a (4.6.12) Archimedean tiling pattern. Depending on the size of the low etch-resistant PI arm and the solvent selected to promote the self-assembly of 3µ-SPI thin films, the voided columns occupy the square or decagonal sites of the (4.6.12) pattern. The use of this (4.6.12) tiling produced for the first time from self-assembled 3µ-ABC thin films can be a promising route to build 2D photonic crystals having complete photonic band gaps, where the light propagation is completely prohibited.
Subject(s)
Hemiterpenes/chemistry , Latex/chemistry , Nanostructures/chemistry , Polystyrenes/chemistry , Polyvinyls/chemistry , Molecular StructureABSTRACT
The fabrication of organic solar cells from aqueous dispersions of photoactive nanoparticles has recently attracted the interest of the photovoltaic community, since these dispersions offer an eco-friendly solution for the fabrication of solar cells, avoiding the use of toxic solvents. In this work, aqueous dispersions of pure poly[n-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) and [6,6]-phenyl-C71 -butyric acid methyl ester (PC71 BM) nanoparticles, as well as of composite PC71 BM:PCDTBT nanoparticles, are prepared using the nanoprecipitation postpolymerization method. These dispersions are subsequently used to form the active layer of organic photovoltaic cells. Thin films of PC71 BM and PCDTBT are obtained by spray deposition of the nanoparticles' dispersions, and are characterized using a combination of spectroscopic and microscopic techniques. Photovoltaics that incorporate these active layers are fabricated thereafter. The impact of the annealing temperature and of the composition of the active layer on the efficiency of the solar cells is studied.
Subject(s)
Butyric Acid/chemistry , Carbazoles/chemistry , Electric Power Supplies , Nanoparticles/chemistry , Polymers/chemistry , Solar Energy , Sulfur Compounds/chemistry , Water/chemistryABSTRACT
Nanotemplates derived from the self-assembly of AB-type block copolymers provide an elegant route to achieve well-defined metallic dot arrays, even if the variety of pattern symmetries is restricted due to the limited number of structures offered by microphase separated diblock copolymers. A strategy that relies on the use of complex network structures accessible through the self-assembly of linear ABC-type terpolymers is presented for the formation of metallic nanodots arrays with "outside-the-box" symmetries. Patterned templates formed by the cubic Q214 and orthorhombic O70 network structures are used as excellent platforms to build well-ordered gold nanodot arrays with unique p3m1 and p2 symmetries, respectively. A simple yet efficient blending strategy is used to tune the critical dimensions of the p3m1 pattern while laterally ordered gold nanodot arrays are also demonstrated through a directed self-assembly approach. Such highly ordered gold nanodots with tunable particle dimensions and array periods, enabling the control of their plasmonic responses, are attractive probes for biological imaging.
Subject(s)
Gold/chemistry , Metal Nanoparticles/chemistry , Polymers/chemistryABSTRACT
The synthesis and self-assembly in thin-film configuration of linear ABC triblock terpolymer chains consisting of polystyrene (PS), poly(2-vinylpyridine) (P2VP), and polyisoprene (PI) are described. For that purpose, a hydroxyl-terminated PS-b-P2VP (45 kg mol-1 ) building block and a carboxyl-terminated PI (9 kg mol-1 ) are first separately prepared by anionic polymerization, and then are coupled via a Steglich esterification reaction. This quantitative and metal-free catalyst synthesis route reveals to be very interesting since functionalization and purification steps are straightforward, and well-defined terpolymers are produced. A solvent vapor annealing (SVA) process is used to promote the self-assembly of frustrated PS-b-P2VP-b-PI chains into a thin-film core-shell double gyroid (Q230 , space group: Ia3¯d) structure. As terraces are formed within PS-b-P2VP-b-PI thin films during the SVA process under a CHCl3 vapor, different plane orientations of the Q230 structure ((211), (110), (111), and (100)) are observed at the polymer-air interface depending on the film thickness.
Subject(s)
Butadienes/chemistry , Hemiterpenes/chemistry , Nanostructures/chemistry , Pentanes/chemistry , Polystyrenes/chemistry , Polyvinyls/chemistry , Butadienes/chemical synthesis , Hemiterpenes/chemical synthesis , Particle Size , Pentanes/chemical synthesis , Polymers/chemical synthesis , Polymers/chemistry , Polystyrenes/chemical synthesis , Polyvinyls/chemical synthesisABSTRACT
Photovoltaic generation has stepped up within the last decade from outsider status to one of the important contributors of the ongoing energy transition, with about 1.7% of world electricity provided by solar cells. Progress in materials and production processes has played an important part in this development. Yet, there are many challenges before photovoltaics could provide clean, abundant, and cheap energy. Here, we review this research direction, with a focus on the results obtained within a Japan-French cooperation program, NextPV, working on promising solar cell technologies. The cooperation was focused on efficient photovoltaic devices, such as multijunction, ultrathin, intermediate band, and hot-carrier solar cells, and on printable solar cell materials such as colloidal quantum dots.
ABSTRACT
Laterally ordered nanorings with a periodicity of 38 nm are produced from the directed self-assembly of poly(1,1-dimethylsilacyclobutane)-block-polystyrene-block-poly(methyl methacrylate) thin films on topographically patterned substrates. Such nanoscale arrays with vertically oriented rings are highly desired in technological applications including memory using magnetic recording, metamaterial, waveguide, etc.
ABSTRACT
The directed self-assembly of diblock copolymer chains (poly(1,1-dimethyl silacyclobutane)-block-polystyrene, PDMSB-b-PS) into a thin film double gyroid structure is described. A decrease of the kinetics of a typical double-wave pattern formation is reported within the 3D-nanostructure when the film thickness on mesas is lower than the gyroid unit cell. However, optimization of the solvent-vapor annealing process results in very large grains (over 10 µm²) with specific orientation (i.e., parallel to the air substrate) and direction (i.e., along the groove direction) of the characteristic (211) plane, demonstrated by templating sub-100-nm-thick PDMSB-b-PS films.
ABSTRACT
A major issue that inhibits the large-scale fabrication of organic solar modules is the use of chlorinated solvents considered to be toxic and hazardous. In this work, composite particles of poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole] (PCDTBT) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) were obtained in water from a versatile and a ready-to-market methodology based on postpolymerization miniemulsification. Depending on the experimental conditions, size-controlled particles comprising both the electron donor and the electron acceptor were obtained and characterized using transmission electron microscopy (TEM), atomic force microscopy (AFM), small-angle neutron scattering (SANS), UV-visible absorption, and fluorescence spectroscopy. Intimate mixing of the two components was definitely asserted through PCDTBT fluorescence quenching in the composite nanoparticles. The water-based inks were used for the preparation of photovoltaic active layers that were subsequently integrated into organic solar cells.
ABSTRACT
We present a computational approach to model hole transport in an amorphous semiconducting fluorene-triphenylamine copolymer (TFB), which is based on the combination of molecular dynamics to predict the morphology of the oligomeric system and Kinetic Monte Carlo (KMC), parameterized with quantum chemistry calculations, to simulate hole transport. Carrying out a systematic comparison with available experimental results, we discuss the role that different transport parameters play in the KMC simulation and in particular the dynamic nature of positional and energetic disorder on the temperature and electric field dependence of charge mobility. It emerges that a semi-quantitative agreement with experiments is found only when the dynamic nature of the disorder is taken into account. This study establishes a clear link between microscopic quantities and macroscopic hole mobility for TFB and provides substantial evidence of the importance of incorporating fluctuations, at the molecular level, to obtain results that are in good agreement with temperature and electric field-dependent experimental mobilities. Our work makes a step forward towards the application of nanoscale theoretical schemes as a tool for predictive material screening.
ABSTRACT
Well-defined single-ion diblock copolymers consisting of a Li-ion conductive poly(styrenesulfonyllithium(trifluoromethylsulfonyl)imide) (PSLiTFSI) block associated with a glassy polystyrene (PS) block have been synthesized via reversible addition fragmentation chain transfer polymerization. Conductivity anisotropy ratio up to 1000 has been achieved from PS-b-PSLiTFSI thin films by comparing Li-ion conductivities of out-of-plane (aligned) and in-plane (antialigned) cylinder morphologies at 40 °C. Blending of PS-b-PSLiTFSI thin films with poly(ethylene oxide) homopolymer (hPEO) enables a substantial improvement of Li-ion transport within aligned cylindrical domains, since hPEO, preferentially located in PSLiTFSI domains, is an excellent lithium-solvating material. Results are also compared with unblended and blended PSLiTFSI homopolymer (hPSLiTFSI) homologues, which reveals that ionic conductivity is improved when thin films are nanostructured.
Subject(s)
Electric Conductivity , Electrolytes/chemistry , Lithium/chemistry , Polymers/chemistry , Anisotropy , Chromatography, Gel , Ions , Microscopy, Atomic Force , Proton Magnetic Resonance Spectroscopy , Solvents/chemistry , TemperatureABSTRACT
Laterally ordered sub-10 nm features are produced from the directed self-assembly of poly(1,1-dimethyl silacyclo-butane)-block-poly(methyl methacrylate) (PDMSB-b-PMMA) thin films on sinusoidal azobenzene-containing patterns. The use of sinusoidal surface relief grating enables the formation of very large grain areas (over several µm(2) ) consisting of out-of-plane PMMA cylinders.
ABSTRACT
The preparation of magnetic inks stable over time made of L10-ordered FePt nanoparticles, thiol-ended poly(ethylene glycol) methyl ether (mPEO-SH) compatibilizing macromolecules and asymmetric polystyrene-block-poly(ethylene oxide) copolymers (BCP) as a subsequent self-organizing medium was optimized. It was demonstrated that the use of sacrificial MgO shells as physical barriers during the annealing stage for getting the L10-ordered state makes easier and more efficient the anchoring of compatibilizing PEO macromolecules onto the nanoparticles surface. L10-FePt grafted nanoparticles have shown a good colloidal stability and affinity with the PEO domains of the BCP leading to L10-FePt/BCP composite thin layers with individual magnetic dots dispersed in the BCP matrix.
ABSTRACT
The synthesis and formulation of organic semiconductors for the emerging technology of organic electronics requires the use of preparative methods and solvents being environment friendly. Today most of the active layer materials for the organic photovoltaic devices and modules are using chlorinated solvents, which are toxic and hazardous. In this work, the synthesis of poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2',1',3'-benzothiadiazole] (PCDTBT) in propan-1-ol is presented as the dispersant continuous phase in the presence of poly(vinylpyrrolidone) used as stabilizer. Suzuki-Miyaura polycondensation of 9-(9-heptadecanyl)-9H-carbazole-2,7-diboronic acid bis(pinacol) ester and 4,7-bis(2-bromo-5-thienyl)-2,1,3-benzothiadiazole in alcohol dispersion yields colloidally stable nanoparticles of PCDTBT with particles size of 330-1300 nm, depending on the stabilizer concentration. Other reaction parameters are also discussed such as the amount of base or Pd catalyst.
Subject(s)
Nanoparticles/chemistry , Polymers/chemical synthesis , 1-Propanol/chemistry , Polymerization , Semiconductors , Thiadiazoles/chemistryABSTRACT
Organic conducting polymers are promising electrode materials for printable organic electronics. One of the most studied conducting polymers is PEDOT: PSS, which is sufficiently conductive and transparent, but which shows some drawbacks, such as hygroscopicity and acidity. A new approach to stabilize PEDOT in aqueous dispersions involves the replacement of PSS with a basic polyanion based on a polystyrene backbone with (trifluoromethylsulfonyl)imide (TSFI) side groups. The PEDOT: PSTFSIK dispersions were obtained by oxidative polymerization of EDOT in an aqueous PSTFSIK solution and were characterized with regard to their composition, morphology, doping, rheological behavior, and optoelectronic performance. The PEDOT: PSTFSIK dispersions showed excellent printability and good optoelectronic performance (238â Ohm sq(-1) at 91% transmittance, σ>260â S cm(-1)) and were successfully integrated as flexible electrodes in OLED and OPV devices.