ABSTRACT
The soft X-ray photoelectron momentum microscopy (PMM) experimental station at the UVSOR Synchrotron Facility has been recently upgraded by additionally guiding vacuum ultraviolet (VUV) light in a normal-incidence configuration. PMM offers a very powerful tool for comprehensive electronic structure analyses in real and momentum spaces. In this work, a VUV beam with variable polarization in the normal-incidence geometry was obtained at the same sample position as the soft X-ray beam from BL6U by branching the VUV beamline BL7U. The valence electronic structure of the Au(111) surface was measured using horizontal and vertical linearly polarized (s-polarized) light excitations from BL7U in addition to horizontal linearly polarized (p-polarized) light excitations from BL6U. Such highly symmetric photoemission geometry with normal incidence offers direct access to atomic orbital information via photon polarization-dependent transition-matrix-element analysis.
ABSTRACT
Chiral crystals and molecules were recently predicted to form an intriguing platform for unconventional orbital physics. Here, we report the observation of chirality-driven orbital textures in the bulk electronic structure of CoSi, a prototype member of the cubic B20 family of chiral crystals. Using circular dichroism in soft x-ray angle-resolved photoemission, we demonstrate the formation of a bulk orbital-angular-momentum texture and monopolelike orbital-momentum locking that depends on crystal handedness. We introduce the intrinsic chiral circular dichroism, icCD, as a differential photoemission observable and a natural probe of chiral electron states. Our findings render chiral crystals promising for spin-orbitronics applications.
ABSTRACT
18-ß-Glycyrrhetinic acid, a major component of licorice, stimulated the proliferation of both dermal papilla cells and outer root sheath cells isolated from human hair follicles. Thus, suggesting that this compound promotes hair growth. Furthermore, this compound inhibited the activity of testosterone 5α-reductase, an enzyme responsible for converting androgen to dihydroandrogen, with an IC50 of 137.1 µM. 18-ß-Glycyrrhetinic acid also suppressed the expression of transforming growth factor-ß1 (TGF-ß1), which shifts the hair cycle from the anagen phase to the telogen phase. It suggested that this compound may prolong the anagen phase. Based on these findings, this compound could be a potentially effective treatment for androgenetic alopecia.
Subject(s)
5-alpha Reductase Inhibitors , Cell Proliferation , Glycyrrhetinic Acid , Hair Follicle , Glycyrrhetinic Acid/pharmacology , Glycyrrhetinic Acid/analogs & derivatives , Humans , Cell Proliferation/drug effects , Hair Follicle/drug effects , Hair Follicle/cytology , 5-alpha Reductase Inhibitors/pharmacology , Cells, Cultured , Hair/growth & development , Hair/drug effects , Transforming Growth Factor beta1/metabolism , Alopecia/drug therapy , 3-Oxo-5-alpha-Steroid 4-Dehydrogenase/metabolism , 3-Oxo-5-alpha-Steroid 4-Dehydrogenase/geneticsABSTRACT
Studies showing that Panax ginseng promotes hair growth have largely been conducted using mice; there are few reports on how P. ginseng affects human hair growth. In particular, little is known about its effect on the telogen to anagen transition. To determine the effect of P. ginseng on human hair growth and the transition from the telogen to the anagen phase. The effects of P. ginseng extract (PGE) and the three major ginsenoside components, Rb1, Rg1, and Re, on the proliferation of human dermal papilla cells (DPCs) and human outer root sheath cells (ORSCs) were investigated. The effects of these compounds on the cell expression of bone morphogenetic protein 4 (BMP4), fibroblast growth factor 18 (FGF18) and Noggin were assessed by real-time PCR. The effect of PGE on hair-shaft elongation was determined in a human hair follicle organ-culture system. PGE and the three ginsenosides stimulated the proliferation of DPCs and ORSCs and suppressed BMP4 expression in DPCs but did not affect FGF18 expression in ORSCs and Noggin expression in DPCs. PGE stimulated hair-shaft growth. PGE and the ginsenosides Rb1, Rg1, and Re stimulate the transition from the telogen phase to anagen phase of the hair cycle by suppressing BMP4 expression in DPCs. These compounds might be useful for promoting the growth of human hair.
Subject(s)
Ginsenosides , Panax , Humans , Animals , Mice , Ginsenosides/pharmacology , Bone Morphogenetic Protein 4 , Cell Proliferation , Hair , Plant Extracts/pharmacologyABSTRACT
A number of synthetic methodologies and applications of carbon quantum dots (CQDs) have been reported since they were first discovered nearly two decades ago. Unlike metal-based or semiconductor-based (e. g., metal chalcogenides) quantum dots (MSQDs), CQDs have the unique feature of being prepared through a variety of synthetic protocols, which are typically understood from considerations of reaction models and photoluminescence mechanisms. Consequently, this brief review article describes quantum dots, in general, and CQDs, in particular, from various viewpoints: (i) their definition, (ii) their photophysical properties, and (iii) the superiority of CQDs over MSQDs. Where possible, comparisons are made between CQDs and MSQDs. First, however, the review begins with a general brief description of quantum dots (QDs) as nanomaterials (sizes≤10â nm), followed by a short description of MSQDs and CQDs. Described subsequently are the various top-down and bottom-up approaches to synthesize CQDs followed by their distinctive photophysical properties (emission spectra; quantum yields, Φs).
ABSTRACT
Constraints on light sources that use mercury (arc lamps) are evolving with the establishment of the Minamata Convention, which has led to the proliferation of LEDs. However, no LED light source emits intense ultraviolet radiation at wavelengths below 300 nm for photolytic applications. Thus, it is necessary to develop suitable UV light sources for the decontamination of wastewater and water sterilization processing. Herein, we explore various substitute gases (e.g., N2, Ar, He and SF6) to replace mercury, which is commonly employed in arc lamps, using an EL (electroluminescence) quartz assembly platform similar to microwave-discharge electrodeless lamps. Although nitrogen is an inexpensive and safe gas, it cannot generate significant UV radiation in the UVC region of 200-300 nm. This problem in the Hg-free light source was resolved by mixing a very small quantity of sulfur hexafluoride (SF6) as an additive filler gas in a nitrogen-, argon- or helium-filled assembly. The low-pressure mercury lamp consisting of Hg/Ar filler gases is ca. 25% more efficient than the novel N2/SF6 lamp toward the photolytic decomposition of Rhodamine-B (RhB) dye-contaminated wastewater (1.66 × 10-4 mM min-1versus 1.22 × 10-4 mM min-1). Nonetheless, the latter has proven far more efficient than an LED source emitting 365 nm radiation (0.057 × 10-4 mM min-1). The addition of TiO2 to RhB-contaminated wastewater demonstrated that this Hg-free N2/SF6 light source is as efficient as the corresponding Hg/Ar electroluminescent lamp toward the photocatalytic decomposition of the RhB dye pollutant.
ABSTRACT
The LitR/CarH protein family transcriptional regulator is a new type of photoreceptor based on the function of adenosyl B12 (AdoB12) as a light-sensitive ligand. Here, we studied a semi-conserved histidine residue (His132) in the light-sensing (AdoB12-binding) domain at the C-terminus of LitR from a thermophilic Gram-negative bacterium, Thermus thermophilus HB27. The in vivo mutation of His132 within LitR caused a reduction in the rate of carotenoid production in response to illumination. BIAcore analysis revealed that the illuminated-LitRH132A possesses high DNA-binding activity compared to the wild-type protein. The subunit structure analysis showed that LitRH132A performed an incomplete subunit dissociation. The ability of LitRH132A to associate with AdoB12 was reduced compared with that of the wild-type protein in an equilibration dialysis experiment. Overall, these results suggest that His132 of LitR is involved in the association with AdoB12 as well as the light-sensitive DNA-binding activity based on oligomer dissociation.
Subject(s)
Bacterial Proteins/genetics , DNA-Binding Proteins/genetics , Histidine/genetics , Photoreceptors, Microbial/genetics , Thermus thermophilus/genetics , Thermus thermophilus/physiology , Amino Acid Sequence/genetics , Gene Expression Regulation, Bacterial , Light , Mutation/genetics , Promoter Regions, Genetic/genetics , Sequence Alignment , Transcription, Genetic/geneticsABSTRACT
UNLABELLED: The LitR/CarH family of proteins is a light-sensitive MerR family of transcriptional regulators that contain an adenosyl B12 (coenzyme B12 or AdoB12)-binding domain at the C terminus. The genes encoding these proteins are found in phylogenetically diverse bacterial genera; however, the biochemical properties of these proteins from Gram-positive bacteria remain poorly understood. We performed genetic and biochemical analyses of a homolog of the LitR protein from Bacillus megaterium QM B1551, a Gram-positive endospore-forming soil bacterium. Carotenoid production was induced by illumination in this bacterium. In vivo analysis demonstrated that LitR plays a central role in light-inducible carotenoid production and serves as a negative regulator of the light-inducible transcription of crt and litR itself. Biochemical evidence showed that LitR in complex with AdoB12 binds to the promoter regions of litR and the crt operon in a light-sensitive manner. In vitro transcription experiments demonstrated that AdoB12-LitR inhibited the specific transcription of the crt promoter generated by a σ(A)-containing RNA polymerase holoenzyme under dark conditions. Collectively, these data indicate that the AdoB12-LitR complex serves as a photoreceptor with DNA-binding activity in B. megaterium QM B1551 and that its function as a transcriptional repressor is fundamental to the light-induced carotenoid production. IMPORTANCE: Members of the LitR/CarH family are AdoB12-based photosensors involved in light-inducible carotenoid production in nonphototrophic Gram-negative bacteria. Our study revealed that Bacillus LitR in complex with AdoB12 also serves as a transcriptional regulator with a photosensory function, which indicates that the LitR/CarH family is generally involved in the light-inducible carotenoid production of nonphototrophic bacteria.
Subject(s)
Bacillus megaterium/metabolism , Bacterial Proteins/metabolism , Carotenoids/metabolism , Cobamides/metabolism , Gene Expression Regulation, Bacterial/physiology , Amino Acid Sequence , Bacillus megaterium/genetics , Base Sequence , Binding Sites , Cobamides/chemistry , DNA Footprinting , Deoxyribonuclease I/metabolism , Light , Molecular Sequence Data , Promoter Regions, Genetic , Protein BindingABSTRACT
A 1D metallic surface state was created on an anisotropic InSb(001) surface covered with Bi. Angle-resolved photoelectron spectroscopy (ARPES) showed a 1D Fermi contour with almost no 2D distortion. Close to the Fermi level (E_{F}), the angle-integrated photoelectron spectra showed power-law scaling with the binding energy and temperature. The ARPES plot above E_{F}, obtained thanks to a thermally broadened Fermi edge at room temperature, showed a 1D state with continuous metallic dispersion across E_{F} and power-law intensity suppression around E_{F}. These results strongly suggest a Tomonaga-Luttinger liquid on the Bi/InSb(001) surface.
Subject(s)
Antimony/chemistry , Bismuth/chemistry , Indium/chemistry , Models, Chemical , Alloys/chemistry , Anisotropy , Photoelectron SpectroscopyABSTRACT
Cobalamin (Cbl) (synonym, vitamin B12) is the cobalt-containing cofactor produced only by some prokaryotes. Streptomyces is an effective Cbl producer. To study the role of Cbl production in Streptomyces, a knockout mutant for Cbl biosynthesis (cob) was generated in Streptomyces coelicolor A3 (2). The growth of the mutant was similar to that of the wild type in a rich medium, but inhibited in minimal medium, suggesting the involvement of Cbl in some step of primary metabolism. Methionine synthesis catalyzed by MetH, the Cbl-dependent methionine synthase, is a candidate. However, supplementing the minimal medium with methionine did not rescue the growth of the cob mutant, indicating that the availability of Cbl affects another primary function. Transcriptional analysis confirmed that the mutant induced metE encoding an alternative Cbl-independent methionine synthase, probably due to the Cbl-dependent riboswitch mechanism. The cob mutant produced low levels of pigment antibiotics and formed fewer aerial mycelium and spores in a rich medium, suggesting that a Cbl-dependent mechanism controls development. A similar developmental defect was observed for a knockout mutant for SCO4800, encoding the putative Cbl-dependent isobutyryl-CoA mutase (Icm) small subunit. Since the knockout of the Icm large subunit (SCO5415) did not affect the developmental phenotype, SCO4800 likely regulates development independently from SCO5415. Effective Cbl production is fundamental to the diverse functions underlying the complex developmental life cycle of S. coelicolor A3 (2).
Subject(s)
Gene Expression Regulation, Fungal , Streptomyces coelicolor/growth & development , Streptomyces coelicolor/metabolism , Vitamin B 12/biosynthesis , Culture Media/chemistry , Gene Expression Profiling , Gene Knockout Techniques , Streptomyces coelicolor/geneticsABSTRACT
LdrP (TT_P0055) (LitR-dependent regulatory protein) is one of the four cAMP receptor protein (CRP)/FNR family transcriptional regulators retained by the extremely thermophilic bacterium Thermus thermophilus. Previously, we reported that LdrP served as a positive regulator for the light-induced transcription of crtB, a carotenoid biosynthesis gene encoded on the megaplasmid of this organism. Here, we showed that LdrP also functions as an activator of the expression of genes clustered around the crtB gene under the control of LitR, an adenosyl B12-bound light-sensitive regulator. Transcriptome analysis revealed the existence of 19 LitR-dependent genes on the megaplasmid. S1 nuclease protection assay confirmed that the promoters preceding TT_P0044 (P44), TT_P0049 (P49) and TT_P0070 (P70) were activated upon illumination in the WT strain. An ldrP mutant lost the ability to activate P44, P49 and P70, whilst disruption of litR resulted in constitutive transcription from these promoters irrespective of illumination, indicating that these genes were photo-dependently regulated by LdrP and LitR. An in vitro transcription experiment demonstrated that LdrP directly activated mRNA synthesis from P44 and P70 by the Thermus RNA polymerase holocomplex. The present evidence indicated that LdrP was the positive regulator essential for the transcription of the T. thermophilus light-inducible cluster encoded on the megaplasmid.
Subject(s)
Gene Expression Regulation, Bacterial/radiation effects , Light , Plasmids , Thermus thermophilus/genetics , Thermus thermophilus/radiation effects , Transcription Factors/metabolism , Gene Expression Profiling , Gene Knockout Techniques , Molecular Sequence Data , Multigene Family , Promoter Regions, Genetic , Sequence Analysis, DNA , Transcription, Genetic , Transcriptional ActivationABSTRACT
Bismuth produces different types of ordered superstructures on the InAs(100) surface, depending on the growth procedure and coverage. The (2 × 1) phase forms at completion of one Bi monolayer and consists of a uniformly oriented array of parallel lines of Bi dimers. Scanning tunneling and core level spectroscopies demonstrate its metallic character, in contrast with the semiconducting properties expected on the basis of the electron counting principle. The weak electronic coupling among neighboring lines gives rise to quasi one-dimensional Bi-derived bands with open contours at the Fermi level. Spin- and angle-resolved photoelectron spectroscopy reveals a giant Rashba splitting of these bands, in good agreement with ab initio electronic structure calculations. The very high density of the dimer lines, the metallic and quasi one-dimensional band dispersion and the Rashba-like spin texture make the Bi/InAs(100)-(2 × 1) phase an intriguing system, where novel transport regimes can be studied.
ABSTRACT
Fermi surfaces of transition metals, which describe all thermodynamical and transport quantities of solids, often fail to be modeled by one-electron mean-field theory due to strong correlations among the valence electrons. In addition, relativistic spin-orbit coupling pronounced in heavier elements lifts the degeneracy of the energy bands and further modifies the Fermi surface. Palladium and rhodium, two 4d metals attributed to show significant spin-orbit coupling and electron correlations, are ideal for a systematic and fundamental study of the two fundamental physical phenomena and their interplay in the electronic structure. In this study, we explored the Fermi surface of the 4d noble metals palladium and rhodium obtained via high-resolution constant initial state momentum microscopy. The complete 3D-Fermi surfaces of palladium and rhodium were tomographically mapped using soft X-ray photon energies from 34 eV up to 660 eV. To fully capture the orbital angular momentum of states across the Fermi surface, the Fermi surface tomography was performed using p- and s- polarized light. Applicability and limitations of the nearly-free electron final state model in photoemission are discussed using a complex band structure model supported by experimental evidence. The significance of spin-orbit coupling and electron correlations across the Fermi surfaces will be discussed within the context of the photoemission results. State-of-the-art fully relativistic Korringa-Kohn-Rostoker (KKR) calculations within the one-step model of photoemission are used to support the experimental results.
ABSTRACT
The photoelectron momentum microscope (PMM) in operation at BL6U, an undulator-based soft x-ray beamline at the UVSOR Synchrotron Facility, offers a new approach for µm-scale momentum-resolved photoelectron spectroscopy (MRPES). A key feature of the PMM is that it can very effectively reduce radiation-induced damage by directly projecting a single photoelectron constant energy contour in reciprocal space with a radius of a few Å-1 or real space with a radius of a few 100 µm onto a two-dimensional detector. This approach was applied to three-dimensional valence band structure E(k) and E(r) measurements ("stereography") as functions of photon energy (hν), its polarization (e), detection position (r), and temperature (T). In this study, we described some examples of possible measurement techniques using a soft x-ray PMM. We successfully applied this stereography technique to µm-scale MRPES to selectively visualize the single-domain band structure of twinned face-centered-cubic Ir thin films grown on Al2O3(0001) substrates. The photon energy dependence of the photoelectron intensity on the Au(111) surface state was measured in detail within the bulk Fermi surface. By changing the temperature of 1T-TaS2, we clarified the variations in the valence band dispersion associated with chiral charge-density-wave phase transitions. Finally, PMMs for valence band stereography with various electron analyzers were compared, and the advantages of each were discussed.
ABSTRACT
The Achlioptas process, a percolation algorithm on random network, shows a rapid second-order phase transition referred to as explosive percolation. To obtain the transition point and critical exponent ß for percolations on a random network, especially for bond percolations, we propose a new scaling analysis that is independent of the system size. The transition point and critical exponent ß are estimated for the product-rule (PR) and da Costa-Dorogovtsev-Goltsev-Mendes (dCDGM) (m=2) models of the Achlioptas process, as well as for the Erdos-Rényi (ER) model, which is a classical model in which the analytic values are known. The validity of the scaling analysis is confirmed, especially for the transition point. The estimations of ß are also consistent with previously reported values for the ER and dCDGM(2) models, whereas the ß estimation for the PR model deviates somewhat. By introducing a parameter representing the maximum cluster size, we develop an extrapolation scheme for the critical exponent ß from the simulation just at the transition point in order to obtain a more accurate value. The estimated value of ß is improved compared with that obtained by the scaling analysis for the ER model and is also consistent with the ß value obtained for the dCDGM(2) model, whereas its deviation from the previously reported value is larger for the PR model. We discuss the accuracy of the present estimations and draw conclusions about their reliability.
ABSTRACT
Suppression of heavy metal elution from municipal solid waste incineration (MSWI) fly ash by cement or geopolymer solidification was studied. When these approaches are implemented, however, the volume of the solidified body increases as a consequence of the solidifying agent addition. Considering that residual landfill disposal capacity is decreasing in the long term, a novel method to suppress the elution of heavy metals from MSWI fly ash without decreasing the disposal capacity is needed. We studied four different water repellents and the results indicated that heavy metal elution can easily be suppressed by impregnating the incineration fly ash with commercially available silane oligomers, alkyl alkoxysilane compounds, and water repellents like fatty acids.
Subject(s)
Metals, Heavy , Refuse Disposal , Carbon , Coal Ash , Incineration , Metals, Heavy/analysis , Particulate Matter , Solid Waste , WaterABSTRACT
Carbon quantum dots (CQDs; luminescent carbon nanoparticles, size < 10 nm) have attracted much attention with respect to their eco-friendliness and multi-functionality. The solvent-dependent photoluminescence of CQDs has been well investigated to optimize the synthesis process and homogeneous dispersion. Although some alkan-1-ol solvents, such as ethanol, have been well utilized empirically as good solvents when synthesizing highly photoluminescent CQDs, the role of alkan-1-ol solvents, particularly long-chain alkan-1-ols (e.g., 1-nonanol, 1-decanol), has not yet been clarified. Herein, we demonstrate a method for the synthesis of strongly yellow emitting CQDs using solvothermal treatment and elucidate the role of alkan-1-ol solvents in the photoluminescence of CQDs. These CQDs have been characterized using theoretical calculations, ex situ morphological observations using transmission electron microscopy (TEM) and dynamic light scattering (DLS), and 500 MHz 1H nuclear magnetic resonance (NMR) and 13C NMR spectroscopy. A comparative study of alkan-1-ol solvents suggests a mechanism for the agglomeration and aggregation of carbon precursors, intermediates, and CQDs, which is expected to lead to further synthesis studies on highly luminescent CQDs.
ABSTRACT
The peculiar metallic electronic states observed in the Kondo insulator, samarium hexaboride (SmB6), has stimulated considerable attention among those studying non-trivial electronic phenomena. However, experimental studies of these states have led to controversial conclusions mainly due to the difficulty and inhomogeneity of the SmB6 crystal surface. Here, we show the detailed electronic structure of SmB6 with angle-resolved photoelectron spectroscopy measurements of the three-fold (111) surface where only two inequivalent time-reversal-invariant momenta (TRIM) exist. We observe the metallic two-dimensional state was dispersed across the bulk Kondo gap. Its helical in-plane spin polarisation around the surface TRIM indicates that SmB6 is topologically non-trivial, according to the topological classification theory for weakly correlated systems. Based on these results, we propose a simple picture of the controversial topological classification of SmB6.
ABSTRACT
A rapid, simple technique combining disk solid-phase extraction and handheld X-ray fluorescence (XRF) spectrometry was developed for the on-site determination of As, Se, and Cr(VI) in drinking water. For the preconcentration of As, Se, and Cr(VI), a 50-mL aqueous sample was adjusted to pH 4, followed by passage through a Ti-loaded anion-exchange disk (Ti-AED). Both sides of the Ti-AED were coated with an adhesive cellophane tape prior to drying using a cordless hair iron, followed by a handheld XRF measurement. The Ti-AED adsorbed As(III), As(V), Se(IV), Se(VI), and Cr(VI) in water without requiring oxidation and reduction. The detection limits of As, Se, and Cr(VI) were all 1.0 µg L-1. Good recoveries were obtained by measuring certified reference materials, and spiking natural mineral water with As, Se, and Cr(VI). As the proposed method does not require a power supply or toxic reagents in any analytical step, it is suitable for the on-site determination of toxic elements in drinking water.
Subject(s)
Arsenic/analysis , Chromium/analysis , Drinking Water/analysis , Selenium/analysis , Water Pollutants, Chemical/analysis , Adsorption , Drinking Water/standards , Ion Exchange , Limit of Detection , Membranes, Artificial , Solid Phase Extraction , Spectrometry, X-Ray Emission , Titanium/chemistryABSTRACT
A synergistic effect between strong electron correlation and spin-orbit interaction has been theoretically predicted to realize new topological states of quantum matter on Kondo insulators (KIs), so-called topological Kondo insulators (TKIs). One TKI candidate has been experimentally observed on the KI SmB6(001), and the origin of the surface states (SS) and the topological order of SmB6 has been actively discussed. Here, we show a metallic SS on the clean surface of another TKI candidate YbB12(001) using angle-resolved photoelectron spectroscopy. The SS shows temperature-dependent reconstruction corresponding to the Kondo effect observed for bulk states. Despite the low-temperature insulating bulk, the reconstructed SS with c-f hybridization is metallic, forming a closed Fermi contour surrounding on the surface Brillouin zone and agreeing with the theoretically expected behaviour for SS on TKIs. These results demonstrate the temperature-dependent holistic reconstruction of two-dimensional states localized on KIs surface driven by the Kondo effect.