Targeted Analysis of the Size Distribution of Heavy Chain-Modified Hyaluronan with Solid-State Nanopores.

The glycosaminoglycan hyaluronan (HA) plays important roles in diverse physiological functions where the distribution of its molecular weight (MW) can influence its behavior and is known to change in response to disease conditions. During inflammation, HA undergoes a covalent modification in which heavy chain subunits of the inter-alpha-inhibitor family of proteins are transferred to its structure, forming heavy chain-HA (HC•HA) complexes. While limited assessments of HC•HA have been performed previously, determining the size distribution of its HA component remains a challenge. Here, we describe a selective method for extracting HC•HA from mixtures that yields material amenable to MW analysis with a solid-state nanopore sensor. After demonstrating the approach in vitro, we validate extraction of HC•HA from osteoarthritic human synovial fluid as a model complex biological matrix. Finally, we apply our technique to pathophysiology by measuring the size distributions of HC•HA and total HA in an equine model of synovitis.

A fetal wound healing program after intrauterine bile duct injury may contribute to biliary atresia.

BACKGROUND & AIMS: Biliary atresia (BA) is an obstructive cholangiopathy that initially affects the extrahepatic bile ducts (EHBDs) of neonates. The etiology is uncertain, but evidence points to a prenatal cause. Fetal tissues have increased levels of hyaluronic acid (HA), which plays an integral role in fetal wound healing. The objective of this study was to determine whether a program of fetal wound healing is part of the response to fetal EHBD injury. METHODS: Mouse, rat, sheep, and human EHBD samples were studied at different developmental time points. Models included a fetal sheep model of prenatal hypoxia, human BA EHBD remnants and liver samples taken at the time of the Kasai procedure, EHBDs isolated from neonatal rats and mice, and spheroids and other models generated from primary neonatal mouse cholangiocytes. RESULTS: A wide layer of high molecular weight HA encircling the lumen was characteristic of the normal perinatal but not adult EHBD. This layer, which was surrounded by collagen, expanded in injured ducts in parallel with extensive peribiliary gland hyperplasia, increased mucus production and elevated serum bilirubin levels. BA EHBD remnants similarly showed increased HA centered around ductular structures compared with age-appropriate controls. High molecular weight HA typical of the fetal/neonatal ducts caused increased cholangiocyte spheroid growth, whereas low molecular weight HA induced abnormal epithelial morphology; low molecular weight HA caused matrix swelling in a bile duct-on-a-chip device. CONCLUSION: The fetal/neonatal EHBD, including in human EHBD remnants from Kasai surgeries, demonstrated an injury response with prolonged high levels of HA typical of fetal wound healing. The expanded peri-luminal HA layer may swell and lead to elevated bilirubin levels and obstruction of the EHBD. IMPACT AND IMPLICATIONS: Biliary atresia is a pediatric cholangiopathy associated with high morbidity and mortality rates; although multiple etiologies have been proposed, the fetal response to bile duct damage is largely unknown. This study explores the fetal pathogenesis after extrahepatic bile duct damage, thereby opening a completely new avenue to study therapeutic targets in the context of biliary atresia.

High Sensitivity Extended Nano-Coulter Counter for Detection of Viral Particles and Extracellular Vesicles.

We present a chip-based extended nano-Coulter counter (XnCC) that can detect nanoparticles affinity-selected from biological samples with low concentration limit-of-detection that surpasses existing resistive pulse sensors by 2-3 orders of magnitude. The XnCC was engineered to contain 5 in-plane pores each with an effective diameter of 350 nm placed in parallel and can provide high detection efficiency for single particles translocating both hydrodynamically and electrokinetically through these pores. The XnCC was fabricated in cyclic olefin polymer (COP) via nanoinjection molding to allow for high-scale production. The concentration limit-of-detection of the XnCC was 5.5 × 103 particles/mL, which was a 1,100-fold improvement compared to a single in-plane pore device. The application examples of the XnCC included counting affinity selected SARS-CoV-2 viral particles from saliva samples using an aptamer and pillared microchip; the selection/XnCC assay could distinguish the COVID-19(+) saliva samples from those that were COVID-19(-). In the second example, ovarian cancer extracellular vesicles (EVs) were affinity selected using a pillared chip modified with a MUC16 monoclonal antibody. The affinity selection chip coupled with the XnCC was successful in discriminating between patients with high grade serous ovarian cancer and healthy donors using blood plasma as the input sample.

Methods for isolating and analyzing physiological hyaluronan: a review.

The carbohydrate hyaluronan (or hyaluronic acid, HA) is found in all human tissues and biofluids where it has wide-ranging functions in health and disease that are dictated by both its abundance and size. Consequently, hyaluronan evaluation in physiological samples has significant translational potential. Although the analytical tools and techniques for probing other biomolecules such as proteins and nucleic acids have become standard approaches in biochemistry, those available for investigating hyaluronan are less well established. In this review, we survey methods related to the assessment of native hyaluronan in biological specimens, including protocols for separating it from biological matrices and technologies for determining its concentration and molecular weight.

Solid-state nanopore analysis of human genomic DNA shows unaltered global 5-hydroxymethylcytosine content associated with early-stage breast cancer.

5-Hydroxymethylcytosine (5hmC), the first oxidized form of the well-known epigenetic modification 5-methylcytosine, is an independent regulator of gene expression and therefore a potential marker for disease. Here, we report on methods developed for a selective solid-state nanopore assay that enable direct analysis of global 5hmC content in human tissue. We first describe protocols for preparing genomic DNA derived from both healthy breast tissue and stage 1 breast tumor tissue and then use our approach to probe the net abundance of the modified base in each cohort. Then, we employ empirical data to adjust for the impact of nanopore diameter on the quantification. Correcting for variations in nanopore diameter among the devices used for analysis reveals no detectable difference in global 5hmC content between healthy and tumor tissue. These results suggest that 5hmC changes may not be associated with early-stage breast cancer and instead are a downstream consequence of the disease.

Simple and Efficient Room-Temperature Release of Biotinylated Nucleic Acids from Streptavidin and Its Application to Selective Molecular Detection.

The biotin-streptavidin bond is the strongest noncovalent bond in nature and is thus used extensively in biotechnology applications. However, the difficulty of releasing the bond without high temperatures or corrosive solutions can be a barrier to applications involving nucleic acids and other delicate substrates. Here, room-temperature phenol is employed to release biotin-tagged DNA constructs from streptavidin rapidly and efficiently. It is demonstrated that synthetic biotinylated DNA can be recovered at yields approaching 100% from both solution-phase and bead-bound streptavidin with as little as 12% (v/v) phenol, leaving the biotin tag active and reusable after extraction. As an application of this recovery method, biotinylated DNA fragments are isolated from a mixed solution to provide selectivity for solid-state nanopore detection.

Wafer-scale fabrication of fused silica chips for low-noise recording of resistive pulses through nanopores.

This paper presents a maskless method to manufacture fused silica chips for low-noise resistive-pulse sensing. The fabrication includes wafer-scale density modification of fused silica with a femtosecond-pulsed laser, low-pressure chemical vapor deposition (LPVCD) of silicon nitride (SiN x ) and accelerated chemical wet etching of the laser-exposed regions. This procedure leads to a freestanding SiN x window, which is permanently attached to a fused silica support chip and the resulting chips are robust towards Piranha cleaning at ∼80 °C. After parallel chip manufacturing, we created a single nanopore in each chip by focused helium-ion beam or by controlled breakdown. Compared to silicon chips, the resulting fused silica nanopore chips resulted in a four-fold improvement of both the signal-to-noise ratio and the capture rate for signals from the translocation of IgG1 proteins at a recording bandwidth of 50 kHz. At a bandwidth of ∼1 MHz, the noise from the fused silica nanopore chips was three- to six-fold reduced compared to silicon chips. In contrast to silicon chips, fused silica chips showed no laser-induced current noise-a significant benefit for experiments that strive to combine nanopore-based electrical and optical measurements.

Solid-State Nanopore Analysis of Diverse DNA Base Modifications Using a Modular Enzymatic Labeling Process.

Many regulated epigenetic elements and base lesions found in genomic DNA can both directly impact gene expression and play a role in disease processes. However, due to their noncanonical nature, they are challenging to assess with conventional technologies. Here, we present a new approach for the targeted detection of diverse modified bases in DNA. We first use enzymatic components of the DNA base excision repair pathway to install an individual affinity label at each location of a selected modified base with high yield. We then probe the resulting material with a solid-state nanopore assay capable of discriminating labeled DNA from unlabeled DNA. The technique features exceptional modularity via selection of targeting enzymes, which we establish through the detection of four DNA base elements: uracil, 8-oxoguanine, T:G mismatch, and the methyladenine analog 1,N6-ethenoadenine. Our results demonstrate the potential for a quantitative nanopore assessment of a broad range of base modifications.

Solid-state nanopore analysis of alcohol-soluble molecules.

We report on a modified solid-state nanopore measurement scheme to probe alcohol-soluble proteins. Taking advantage of the intrinsic alcohol solubility of LiCl as an electrolyte, we show that the devices can be operated in azeotropic mixtures of ethanol and water. We first characterize nanopore conductivity across a range of ethanol content as a function of both nanopore diameter and salt concentration, showing ionic response that can be understood through established models. Then, as a demonstration of resistive-pulse sensing, we measure and interpret electrical translocations of zeins, a class of alcohol-soluble maize protein.

Solid-state nanopore localization by controlled breakdown of selectively thinned membranes.

We demonstrate precise positioning of nanopores fabricated by controlled breakdown (CBD) on solid-state membranes by spatially varying the electric field strength with localized membrane thinning. We show 100 × 100 nm2 precision in standard SiN x membranes (30-100 nm thick) after selective thinning by as little as 25% with a helium ion beam. Control over nanopore position is achieved through the strong dependence of the electric field-driven CBD mechanism on membrane thickness. Confinement of pore formation to the thinned region of the membrane is confirmed by TEM imaging and by analysis of DNA translocations. These results enhance the functionality of CBD as a fabrication approach and enable the production of advanced nanopore devices for single-molecule sensing applications.

Sequence-Specific Recognition of MicroRNAs and Other Short Nucleic Acids with Solid-State Nanopores.

The detection and quantification of short nucleic acid sequences has many potential applications in studying biological processes, monitoring disease initiation and progression, and evaluating environmental systems, but is challenging by nature. We present here an assay based on the solid-state nanopore platform for the identification of specific sequences in solution. We demonstrate that hybridization of a target nucleic acid with a synthetic probe molecule enables discrimination between duplex and single-stranded molecules with high efficacy. Our approach requires limited preparation of samples and yields an unambiguous translocation event rate enhancement that can be used to determine the presence and abundance of a single sequence within a background of nontarget oligonucleotides.

Nanopore Analysis of Single-Stranded Binding Protein Interactions with DNA.

We study the binding of E. coli single-stranded binding protein (SSB) to single-stranded DNA (ssDNA) using a solid-state nanopore assay. We find that saturated nucleoprotein complexes can be distinguished easily from free SSB, ssDNA, or double-stranded DNA individually and demonstrate that the high affinity of SSB for ssDNA can be exploited to achieve high-fidelity differentiation from duplex molecules in a mixture. We then study nucleoprotein filament formation by systematically varying the amount of SSB relative to ssDNA. We observe a concomitant shift in the mean amplitude of electrical events that is consistent with weakly cooperative binding. Finally, we compare circular and linearized ssDNA saturated with SSB and use the results to infer structural details of the nucleoprotein complex.

Controlled translocation of DNA through nanopores in carbon nano-, silicon-nitride- and lipid-coated membranes.

We investigated experimentally and theoretically the translocation forces when a charged polymer is threaded through a solid-state nanopore and found distinct dependencies on the nanopore diameter as well as on the nano membrane material chemistry. For this purpose we utilized dedicated optical tweezers force mechanics capable of probing the insertion of negatively charged double-stranded DNA inside a helium-ion drilled nanopore. We found that both the diameter of the nanopore and the membrane material itself have significant influences on the electroosmotic flow through the nanopore and thus on the threading force. Compared to a bare silicon-nitride membrane, the threading of DNA through only 3 nm thin carbon nano membranes as well as lipid bilayer-coated nanopores increased the threading force by 15% or 85%, respectively. This finding was quantitatively described by our recently developed theoretical model that also incorporates hydrodynamic slip effects on the translocating DNA molecule and the force dependence on the membrane thickness. The additional measurements presented in this paper further support our model.

Hydrodynamic slip on DNA observed by optical tweezers-controlled translocation experiments with solid-state and lipid-coated nanopores.

We use optical tweezers to investigate the threading force on a single dsDNA molecule inside silicon-nitride nanopores between 6 and 70 nm in diameter, as well as lipid-coated solid-state nanopores. We observe a strong increase of the threading force for decreasing nanopore size that can be attributed to a significant reduction in the electroosmotic flow (EOF), which opposes the electrophoresis. Additionally, we show that the EOF can also be reduced by coating the nanopore wall with an electrically neutral lipid bilayer, resulting in an 85% increase in threading force. All experimental findings can be described by a quantitative theoretical model that incorporates a hydrodynamic slip effect on the DNA surface with a slip length of 0.5 nm.

Selective detection and quantification of modified DNA with solid-state nanopores.

We demonstrate a solid-state nanopore assay for the unambiguous discrimination and quantification of modified DNA. Individual streptavidin proteins are employed as high-affinity tags for DNA containing a single biotin moiety. We establish that the rate of translocation events corresponds directly to relative concentration of protein-DNA complexes and use the selectivity of our approach to quantify modified oligonucleotides from among a background of unmodified DNA in solution.

Membrane thickness dependence of nanopore formation with a focused helium ion beam.

Solid-state nanopores are emerging as a valuable tool for the detection and characterization of individual biomolecules. Central to their success is the realization of fabrication strategies that are both rapid and flexible in their ability to achieve diverse device dimensions. In this paper, we demonstrate the membrane thickness dependence of solid-state nanopore formation with a focused helium ion beam. We vary membrane thickness in situ and show that the rate of pore expansion follows a reproducible trend under all investigated membrane conditions. We show that this trend shifts to lower ion dose for thin membranes in a manner that can be described quantitatively, allowing devices of arbitrary dimension to be realized. Finally, we demonstrate that thin, small-diameter nanopores formed with our approach can be utilized for high signal-to-noise ratio resistive pulse sensing of DNA.

Improving the Performance of Selective Solid-State Nanopore Sensing Using a Polyhistidine-Tagged Monovalent Streptavidin.

Solid-state (SS-) nanopore sensing has gained tremendous attention in recent years, but it has been constrained by its intrinsic lack of selectivity. To address this, we previously established a novel SS-nanopore assay that produces translocation signals only when a target biotinylated nucleic acid fragment binds to monovalent streptavidin (MS), a protein variant with a single high-affinity biotin-binding domain. While this approach has enabled selective quantification of diverse nucleic acid biomarkers, sensitivity enhancements are needed to improve the detection of low-abundance translational targets. Because the translocation dynamics that determine assay efficacy are largely governed by constituent charge characteristics, we here incorporate a polyhistidine-tagged MS (hMS) to alter the component detectability. We investigate the effects of buffer pH, salt concentration, and SS-nanopore diameter on the performance with the alternate reagent, achieve significant improvements in measurement sensitivity and selectivity, and expand the range of device dimensions viable for the assay. We used this improvement to detect as little as 1 nM miRNA spiked into human plasma. Overall, our findings improve the potential for broader applications of SS-nanopores in the quantitative analyses of molecular biomarkers.

Detection and identification of single ribonucleotide monophosphates using a dual in-plane nanopore sensor made in a thermoplastic via replication.

We report the generation of ∼8 nm dual in-plane pores fabricated in a thermoplastic via nanoimprint lithography (NIL). These pores were connected in series with nanochannels, one of which served as a flight tube to allow the identification of single molecules based on their molecular-dependent apparent mobilities (i.e., dual in-plane nanopore sensor). Two different thermoplastics were investigated including poly(methyl methacrylate), PMMA, and cyclic olefin polymer, COP, as the substrate for the sensor both of which were sealed using a low glass transition cover plate (cyclic olefin co-polymer, COC) that could be thermally fusion bonded to the PMMA or COP substrate at a temperature minimizing nanostructure deformation. Unique to these dual in-plane nanopore sensors was two pores flanking each side of the nanometer flight tube (50 × 50 nm, width × depth) that was 10 µm in length. The utility of this dual in-plane nanopore sensor was evaluated to not only detect, but also identify single ribonucleotide monophosphates (rNMPs) by using the travel time (time-of-flight, ToF), the resistive pulse event amplitude, and the dwell time. In spite of the relatively large size of these in-plane pores (∼8 nm effective diameter), we could detect via resistive pulse sensing (RPS) single rNMP molecules at a mass load of 3.9 fg, which was ascribed to the unique structural features of the nanofluidic network and the use of a thermoplastic with low relative dielectric constants, which resulted in a low RMS noise level in the open pore current. Our data indicated that the identification accuracy of individual rNMPs was high, which was ascribed to an improved chromatographic contribution to the nano-electrophoresis apparent mobility. With the ToF data only, the identification accuracy was 98.3%. However, when incorporating the resistive pulse sensing event amplitude and dwell time in conjunction with the ToF and analyzed via principal component analysis (PCA), the identification accuracy reached 100%. These findings pave the way for the realization of a novel chip-based single-molecule RNA sequencing technology.

In situ thickness assessment during ion milling of a free-standing membrane using transmission helium ion microscopy.

We describe a novel method for in situ measurement of the local thickness of a freely suspended solid-state membrane after thinning with a focused helium ion beam. The technique utilizes a custom stage for the helium ion microscope that allows the secondary electron detector used for normal imaging to collect information from ions transmitted through the sample. We find that relative brightness in the transmission image scales directly with the membrane thickness as determined by atomic force microscopy measurements.