ABSTRACT
In contrast to the passive remote sensing of global CO2 column concentrations (XCO2), active remote sensing with a lidar enables continuous XCO2 measurements throughout the entire atmosphere in daytime and nighttime. The lidar could penetrate most cirrus and is almost unaffected by aerosols. Atmospheric environment monitoring satellite (AEMS, also named DQ-1) aerosol and carbon dioxide detection Lidar (ACDL) is a novel spaceborne lidar that implements a 1572â nm integrated path differential absorption (IPDA) method to measure the global XCO2 for the first time. In this study, special methods have been developed for ACDL data processing and XCO2 retrieval. The CO2 measurement data products of ACDL, including the differential absorption optical depth between the online and offline wavelengths, the integral weighting function, and XCO2, are presented. The results of XCO2 measurements over the period from 1st June 2022 to 30th June 2022 (first month data of ACDL) are analyzed to demonstrate the measurement capabilities of the spaceborne ACDL system.
ABSTRACT
Particulate matter with an aerodynamic diameter of less than 1 µm (PM1.0) can be extremely hazardous to human health, so it is imperative to accurately estimate the spatial and temporal distribution of PM1.0 and analyze the impact of related policies on it. In this study, a stacking generalization model was trained based on aerosol optical depth (AOD) data from satellite observations, combined with related data affecting aerosol concentration such as meteorological data and geographic data. Using this model, the PM1.0 concentration distribution in China during 2016-2019 was estimated, and verified by comparison with ground-based stations. The coefficient of determination (R2) of the model is 0.94, and the root-mean-square error (RMSE) is 8.49 µg/m3, mean absolute error (MAE) is 4.10 µg/m3, proving that the model has a very high performance. Based on the model, this study analyzed the PM1.0 concentration changes during the heating period (November and December) in the regions where the "coal-to-gas" policy was implemented in China, and found that the proposed "coal-to-gas" policy did reduce the PM1.0 concentration in the implemented regions. However, the lack of natural gas due to the unreasonable deployment of the policy in the early stage caused the increase of PM1.0 concentration. This study can provide a reference for the next step of urban air pollution policy development.
Subject(s)
Air Pollutants , Particulate Matter , Particulate Matter/analysis , China , Air Pollutants/analysis , Coal , Environmental Monitoring , Air Pollution/analysis , Aerosols/analysisABSTRACT
CO2 column-weighted dry-air mixing ratio (XCO2) products with high precision and spatial resolution are essential for inverting CO2 fluxes and promoting our understanding of global climate change. Compared with passive remote sensing methods, IPDA LIDAR, as an active remote sensing technique, offers many advantages in measuring XCO2. However, a significant random error in IPDA LIDAR measurements causes XCO2 values calculated directly from LIDAR signals to be unqualified as the final XCO2 products. Hence, we propose an efficient particle filter-based inversion of CO2 for single observation (EPICSO) algorithm to precisely retrieve the XCO2 of every LIDAR observation while preserving the high spatial resolution of LIDAR measurements. The EPICSO algorithm adopts the sliding average results as the first estimate of the local XCO2; subsequently, it estimates the difference between two adjacent XCO2 points and calculates the posterior probability of XCO2 based on particle filter theory. To evaluate the performance of the EPICSO algorithm numerically, we perform an EPICSO to process pseudo-observation data. The simulation results show that the results retrieved by the EPICSO algorithm satisfy the required high precision and that the algorithm is robust to a significant amount of random errors. In addition, we utilize LIDAR observation data from actual experiments in Hebei, China, to validate the performance of the EPICSO algorithm. The results retrieved by the EPICSO algorithm are more consistent with the actual local XCO2 than those of the conventional method, indicating that the EPICSO algorithm is efficient and practical for retrieving XCO2 with high precision and spatial resolution.
ABSTRACT
This study investigated the fungal community succession and volatile compound dynamics of Harbin dry sausage during a twelve-day fermentation using high-throughput internal transcribed spacer amplicon sequencing and headspace solid-phase microextraction gas chromatography-mass spectrometry. Aspergillus pseudoglaucus was found to be the primary species in the sausages during fermentation, whereas Lasiodiplodia theobromae, Alternaria alternata, Aspergillus caesiellus, and Trichosporon asahii were also prevalent. Additionally, a total of 72 volatile compounds were identified in the dry sausages, of which 24 key compounds (odor activity value > 1) dominated flavor development, including 3 aldehydes, 1 ketone, 4 alcohols, 9 esters, 4 alkenes, and 3 other compounds. Furthermore, correlation analysis suggested that most of the core fungi were positively correlated with the key volatile compounds, particularly A. pseudoglaucus, Aspergillus gracilis, Trichosporon caseorum, Debaryomyces hansenii, and T. asahii. Our findings provide novel insights into the fungal ecology and flavor development of Harbin dry sausages.
Subject(s)
Fungi/isolation & purification , Mycobiome , Volatile Organic Compounds/chemistry , Animals , Fermentation , Flavoring Agents/chemistry , Flavoring Agents/metabolism , Food Microbiology , Fungi/classification , Fungi/genetics , Fungi/metabolism , Gas Chromatography-Mass Spectrometry , Meat Products/microbiology , Swine , Volatile Organic Compounds/metabolismABSTRACT
For high-precision measurements of the CO2 column concentration in the atmosphere with airborne integrated path differential absorption (IPDA) Lidar, the exact distance of the Lidar beam to the scattering surface, that is, the length of the column, must be measured accurately. For the high-precision inversion of the column length, we propose a set of methods on the basis of the actual conditions, including autocorrelation detection, adaptive filtering, Gaussian decomposition, and optimized Levenberg-Marquardt fitting based on the generalized Gaussian distribution. Then, based on the information of a pair of laser pulses, we use the direct adjustment method of unequal precision to eliminate the error in the distance measurement. Further, the effect of atmospheric delay on distance measurements is considered, leading to further correction of the inversion results. At last, an airborne experiment was carried out in a sea area near Qinhuangdao, China on March 14, 2019. The results showed that the ranging accuracy can reach 0.9066 m, which achieved an excellent ranging accuracy on 1.57-µm IPDA Lidar and met the requirement for high-precision CO2 column length inversion.
ABSTRACT
The gastrointestinal tract (GIT) plays a key role in regulating nutrient metabolism and appetite responses. This study aimed to identify changes in the GIT that are important in the development of diet related obesity and diabetes. GIT samples were obtained from C57BL/6J male mice chronically fed a control diet or a high sucrose diet (HSD) and analysed for changes in gene, protein and metabolite levels. In HSD mice, GIT expression levels of fat oxidation genes were reduced, and increased de novo lipogenesis was evident in ileum. Gene expression levels of the putative sugar sensor, slc5a4a and slc5a4b, and fat sensor, cd36, were downregulated in the small intestines of HSD mice. In HSD mice, there was also evidence of bacterial overgrowth and a lipopolysaccharide activated inflammatory pathway involving inducible nitric oxide synthase (iNOS). In Caco-2 cells, sucrose significantly increased the expression levels of the nos2, iNOS and nitric oxide (NO) gas levels. In conclusion, sucrose fed induced obesity/diabetes is associated with changes in GI macronutrient sensing, appetite regulation and nutrient metabolism and intestinal microflora. These may be important drivers, and thus therapeutic targets, of diet-related metabolic disease.
Subject(s)
Animal Feed , Animal Nutritional Physiological Phenomena/genetics , Dietary Sucrose/administration & dosage , Gastrointestinal Tract/metabolism , Lipid Metabolism/genetics , Animals , Biomarkers , Body Weights and Measures , Eating , Gastrointestinal Microbiome , Gene Expression Regulation , Humans , Intestine, Small , Lipopolysaccharides , Male , Mice , Nitric Oxide/metabolism , Real-Time Polymerase Chain ReactionABSTRACT
Atmospheric CO2 plays an important role in controlling climate change and its effect on the carbon cycle. However, detailed information on the dynamics of CO2 vertical mixing remains lacking, which hinders the accurate understanding of certain key features of the carbon cycle. Differential absorption lidar (DIAL) is a promising technology for CO2 detection due to its characteristics of high precision, high time resolution, and high spatial resolution. Ground-based CO2-DIAL can provide the continuous observations of the vertical profile of CO2 concentration, which can be highly significant to gaining deeper insights into the rectification effect of CO2, the ratio of respiration photosynthesis, and the CO2 dome in urban areas. A set of ground-based CO2-DIAL systems were developed by our team and highly accurate long-term laboratory experiments were conducted. Nonetheless, the performance suffered from low signal-to-noise ratio (SNR) in field explorations because of decreasing aerosol concentrations with increasing altitude and surrounding interference according to the results of our experiments in Wuhan and Huainan. The concentration of atmospheric CO2 is derived from the difference of signals between on-line and off-line wavelengths; thus, low SNR will cause the superimposition of the final inversion error. In such a situation, an efficient and accurate denoising algorithm is critical for a ground-based CO2-DIAL system, particularly in field experiments. In this study, a method based on lifting wavelet transform (LWT) for CO2-DIAL signal denoising was proposed. This method, which is an improvement of the traditional wavelet transform, can select different predictive and update functions according to the characteristics of lidar signals, thereby making it suitable for the signal denoising of CO2-DIAL. Experiment analyses were conducted to evaluate the denoising effect of LWT. For comparison, ensemble empirical mode decomposition denoising was also performed on the same lidar signal. In addition, this study calculated the coefficient of variation (CV) at the same altitude among multiple original signals within 10 min and then performed the same calculation on the denoised signal. Finally, high-quality signal of ground-based CO2-DIAL was obtained using the LWT denoising method. The differential absorption optical depths of the denoised signals obtained via LWT were calculated, and the profile distribution information of CO2 concentration was acquired during field detection by using our developed CO2-DIAL systems.
ABSTRACT
The increase of greenhouse gas is one of the most important factors leading to global climate change. Differential absorption lidar (DIAL) is considered to be the tool with the most potential to measure CO2 remotely. However, it is difficult to obtain accurate CO2 retrievals and determine carbon fluxes with the traditional dual-wavelength differential absorption inversion method, which is characterized by a low signal-to-noise ratio (SNR). Therefore, a multi-wavelength differential absorption inversion framework is proposed in this work. Based on the measurement of the absorption optical depths (ODs) of a single line at 30 different wavelengths, we tried to minimize the differences between the simulated and measured absorption ODs through an iterative process, which consisted of forward simulation and reverse inversion processes. The retrievals are determined when an optimal solution is obtained. The simulation experiments show that the precision of the nonuniform sampling wavelength method is better than that of the dual-wavelength method. The precision of the proposed method was improved by more than 60% for an SNR of 30-40 dB compared to the traditional method. Furthermore, the average error of this method is about 1/9th the traditional method.
ABSTRACT
High-accuracy on-line wavelength stabilization is required for differential absorption lidar (DIAL), which is ideal for precisely measuring atmospheric CO(2) concentration. Using a difference-frequency laser, we developed a ground-based 1.57-µm pulsed DIAL for performing atmospheric CO(2) measurements. Owing to the system complexity, lacking phase, and intensity instability, the stabilization method was divided into two parts-wavelength calibration and locking-based on saturated absorption. After obtaining the on-line laser position, accuracy verification using statistical theory and locking stabilization using a one-dimensional template matching method, namely least-squares matching (LSM), were adopted to achieve wavelength locking. The resulting system is capable of generating a stable wavelength.
ABSTRACT
The accurate estimation of deposits adhering on insulators is of great significance to prevent pollution flashovers which cause huge costs worldwide. Researchers have developed sensors using different technologies to monitor insulator contamination on a fine time scale. However, there is lack of analysis of these data to reveal spatial and temporal characteristics of insulator contamination, and as a result the scheduling of periodical maintenance of power facilities is highly dependent on personal experience. Owing to the deployment of novel sensors, daily Equivalent Salt Deposit Density (ESDD) observations of over two years were collected and analyzed for the first time. Results from 16 sites distributed in four regions of Hubei demonstrated that spatial heterogeneity can be seen at both the fine and coarse geographical scales, suggesting that current polluted area maps are necessary but are not sufficient conditions to guide the maintenance of power facilities. Both the local emission and the regional air pollution condition exert evident influences on deposit accumulation. A relationship between ESDD and PM10 was revealed by using regression analysis, proving that air pollution exerts influence on pollution accumulations on insulators. Moreover, the seasonality of ESDD was discovered for the first time by means of time series analysis, which could help engineers select appropriate times to clean the contamination. Besides, the trend component shows that the ESDD increases in a negative exponential fashion with the accumulation date (ESDD = a - b × exp(-time)) at a long time scale in real environments.
ABSTRACT
Kitasamycin (KM), a broad-spectrum macrolide antibiotic, has implications for growth performance and residue in animals and humans. This study aimed to explore the effects of different KM doses on intramuscular fat accumulation, cecal microflora, and short-chain fatty acids (SCFAs) using a growing-finishing pig model. Forty-two pigs were divided into three groups: control, subtherapeutic KM (50 mg/kg, KM50), and therapeutic KM (200 mg/kg, KM200) diets over 8 weeks. KM50 led to increased back fat thickness, fat content in the longissimus dorsi muscle (LM), and elevated plasma total cholesterol (TC) levels (p < 0.05), supported by upregulated lipid synthesis gene expression (Acc1, Fas, Scd1) (p < 0.05) in the LM. KM50 altered cecal microflora, reducing Lactobacillus spp. and Bifidobacterium spp. abundance, while increasing SCFA concentrations (acetic acid, propionic acid, total SCFAs) (p < 0.05). KM200 had minimal effects on intestinal weight and density, with increased apparent digestibility of nutrients. These findings highlight the dose-dependent impact of KM on intramuscular fat deposition. Subtherapeutic KM induced ectopic fat deposition, emphasizing potential risks in disease treatment for humans and animals.
ABSTRACT
Chromosome rearrangements may distort 3D chromatin architectures and thus change gene regulation, yet how 3D chromatin structures evolve in insects is largely unknown. Here, we obtain chromosome-level genomes for four butterfly species, Graphium cloanthus, Graphium sarpedon, Graphium eurypylus with 2n = 30, 40, and 60, respectively, and Papilio bianor with 2n = 60. Together with large-scale Hi-C data, we find that inter-chromosome rearrangements very rarely disrupted the pre-existing 3D chromatin structure of ancestral chromosomes. However, some intra-chromosome rearrangements changed 3D chromatin structures compared to the ancestral configuration. We find that new TADs and subTADs have emerged across the rearrangement sites where their adjacent compartments exhibit uniform types. Two intra-chromosome rearrangements altered Rel and lft regulation, potentially contributing to wing patterning differentiation and host plant choice. Notably, butterflies exhibited chromatin loops between Hox gene cluster ANT-C and BX-C, unlike Drosophila. Our CRISPR-Cas9 experiments in butterflies confirm that knocking out the CTCF binding site of the loops in BX-C affected the phenotypes regulated by Antp in ANT-C, resulting in legless larva. Our results reveal evolutionary patterns of insect 3D chromatin structures and provide evidence that 3D chromatin structure changes can play important roles in the evolution of traits.
Subject(s)
Butterflies , Chromatin , Evolution, Molecular , Genome, Insect , Animals , Butterflies/genetics , Chromatin/metabolism , Chromatin/genetics , Gene Rearrangement/genetics , Chromosomes, Insect/genetics , Insect Proteins/genetics , Insect Proteins/metabolism , CCCTC-Binding Factor/metabolism , CCCTC-Binding Factor/geneticsABSTRACT
Functional studies of long noncoding RNAs (lncRNAs) have been hindered by the lack of methods to assess their evolution. Here we present lncRNA Homology Explorer (lncHOME), a computational pipeline that identifies a unique class of long noncoding RNAs (lncRNAs) with conserved genomic locations and patterns of RNA-binding protein (RBP) binding sites (coPARSE-lncRNAs). Remarkably, several hundred human coPARSE-lncRNAs can be evolutionarily traced to zebrafish. Using CRISPR-Cas12a knockout and rescue assays, we found that knocking out many human coPARSE-lncRNAs led to cell proliferation defects, which were subsequently rescued by predicted zebrafish homologs. Knocking down coPARSE-lncRNAs in zebrafish embryos caused severe developmental delays that were rescued by human homologs. Furthermore, we verified that human, mouse and zebrafish coPARSE-lncRNA homologs tend to bind similar RBPs with their conserved functions relying on specific RBP-binding sites. Overall, our study demonstrates a comprehensive approach for studying the functional conservation of lncRNAs and implicates numerous lncRNAs in regulating vertebrate physiology.
Subject(s)
RNA, Long Noncoding , Humans , Animals , Mice , RNA, Long Noncoding/genetics , RNA, Long Noncoding/metabolism , Zebrafish/genetics , Genomics , GenomeABSTRACT
The frequency and severity of hot drought will increase in the future due to impact of climate change and human activities, threatening the sustainability of terrestrial ecosystems and human societies. Hot drought is a typical type of drought event, high vapor pressure deficit (VPD) and low soil moisture (SM) are its main characteristics of hot drought, with increasing water stress on vegetation and exacerbating hydrological drought and ecosystem risks. However, our understanding of the effects of high VPD and low SM on vegetation productivity is limited, because these two variables are strongly coupled and influenced by other climatic drivers. The southwestern United States experienced one of the most severe hot drought events on record in 2020. In this study, we used SM and gross primary productivity (GPP) datasets from Soil Moisture Active and Passive (SMAP), as well as VPD and other meteorological datasets from gridMET. We decoupled the effects of different meteorological factors on GPP at monthly and daily scales using partial correlation analysis, partial least squares regression, and binning methods. We found that SM anomalies contribute more to GPP anomalies than VPD anomalies at monthly and daily scales. Especially at the daily scale, as the decoupled SM anomalies increased, the GPP anomalies increased. However, there is no significant change in GPP anomalies as VPD increases. For all the vegetation types and arid zones, SM dominated the variation in GPP, followed by VPD or maximum temperature. At the flux tower scale, decoupled soil water content (SWC) also dominated changes in GPP, compared to VPD. In the next century, hot drought will occur frequently in dryland regions, where GPP is one of the highest uncertainties in terrestrial ecosystems. Our study has important implications for identifying the strong coupling of meteorological factors and their impact on vegetation under climate change.
ABSTRACT
Poor emulsification of myofibrillar proteins (MPs) limits the production of meat protein emulsion-type products, and it is related to the myosin self-assembles in low-salt settings. The effect of high-intensity ultrasound (HIU) pretreatment combined with non-enzymatic glycation on MP-stabilized emulsions in low-salt settings was investigated in this study, and the potential mechanism was revealed. The results indicated that, compared to using either HIU or glycation treatment alone, HIU pretreatment in combination with glycation significantly improves the physical stability of emulsions while increasing the distribution uniformity and reducing the droplet particle size from 18.05 µm to 2.54 µm (P < 0.05). Correspondingly, the emulsion prepared using this approach exhibited a relatively high absolute zeta potential (-23.58 mV) and a high interfacial protein content (38.78 %) (P < 0.05), promoting molecular rearrangement and forming a continuous and stable interfacial layer. HIU pretreatment combined with glycation could offer reinforced electrostatic repulsion and steric hindrance to depolymerize self-assembled filamentous polymers, thus enhancing the stability of droplets. Additionally, the thermal sensitivity of the glycated MPs pretreated by HIU was remarkably reduced, thus improving the thermal stability of the corresponding emulsions.
Subject(s)
Maillard Reaction , Polymers , Emulsions , Osmolar Concentration , Particle SizeABSTRACT
The low thermal stability of myofibrillar proteins (MPs) is a technological barrier to them being applied in beverage formulas. In this study, we investigated the effect of high-intensity ultrasound (HIU) pretreatment combined with glycation on the thermal stability, structural characteristics, and in vitro digestion behavior of MPs in water. The results indicated that HIU pretreatment combined with glycation significantly inhibited thermal aggregation and reduced the particle size of MPs compared to using either HIU or glycation treatments individually. The grafting of dextran (DX) shielded the sulfhydryl (-SH) and hydrophobic groups and inhibited disulfide bond cross-linking and hydrophobic association. Moreover, HIU pretreatment facilitated the shielding effect of glycation by destroying the filamentous myosin structure and exposing the internal -SH and hydrophobic groups as well as the grafting sites, maximally inhibiting thermal aggregation. In addition, the smaller protein particles and more flexible structure caused by HIU pretreatment combined with glycation increased their binding affinity toward protease. Overall, these findings can promote the technological development of modulating the MP structure-digestion for formulating novel meat protein-based products.
ABSTRACT
It remains intriguing whether macromolecular isomerism, along with competing molecular interactions, could be leveraged to create unconventional phase structures and generate considerable phase complexity in soft matter. Herein, we report the synthesis, assembly, and phase behaviors of a series of precisely defined regioisomeric Janus nanograins with distinct core symmetry. They are named B2DB2 where B stands for iso-butyl-functionalized polyhedral oligomeric silsesquioxanes (POSS) and D stands for dihydroxyl-functionalized POSS. While BPOSS prefers crystallization with a flat interface, DPOSS prefers to phase-separate from BPOSS. In solution, they form 2D crystals owing to strong BPOSS crystallization. In bulk, the subtle competition between crystallization and phase separation is strongly influenced by the core symmetry, leading to distinct phase structures and transition behaviors. The phase complexity was understood based on their symmetry, molecular packing, and free energy profiles. The results demonstrate that regioisomerism could indeed generate profound phase complexity.
ABSTRACT
RNA excited states represent a class of high-energy-level and thus low-populated conformational states of RNAs that are sequestered within the free energy landscape until being activated by cellular cues. In recent years, there has been growing interest in structural and functional studies of these transient states, but the rational design of excited states remains unexplored. Here we developed a method to design small hairpin RNAs with predefined excited states that exchange with ground states through base pair reshuffling, and verified these transient states by combining NMR relaxation dispersion technique and imino chemical shift prediction. Using van't Hoff analysis and accelerated molecular dynamics simulations, a mechanism of multi-step sequential transition has been revealed. The efforts made in this study will expand the scope of RNA rational design, and also contribute towards improved predictions of RNA secondary structure.
Subject(s)
Molecular Dynamics Simulation , RNA , Base Pairing , Magnetic Resonance Spectroscopy , Nuclear Magnetic Resonance, Biomolecular/methods , RNA/geneticsABSTRACT
The poor water solubility of myofibrillar proteins (MPs) limits their application in food industry, and is directly related to the molecular behavior associated with myosin assembly into filaments. This study aims to explore the effect of high-intensity ultrasound (HIU) combined with nonenzymatic glycation on the solubility, structural characteristics, and filament-forming behavior of MPs in low ionic strength media. The results showed that the HIU (200-400 W) application could promote the subsequent glycation reaction between MPs and dextran (DX) and interfere with the electrostatic balance between myosin rods, suppressing the formation of filamentous myosin polymers. Glycated MPs pretreated by 400 W HIU had the highest solubility, which corresponded to the smallest particle size, highest zeta potential, and optimum storage stability (P < 0.05). Structure analysis and microscopic morphology observations suggested that the loss of the MP superhelix and the depolymerization of filamentous polymers were the main mechanisms for MP solubilization. In conclusion, HIU combined with glycation can effectively improve the water solubility of MPs by destroying or suppressing the assembly of myosin molecules.
Subject(s)
Dextrans , Myosins , Myosins/chemistry , Proteins , Solubility , Water/chemistryABSTRACT
Filamentous myosin is a self-assembling polymer that prevents myofibrillar proteins (MPs) from functioning in low ionic strength media. This study was aimed at investigating if glycation has the potential to improve the solubility of MPs in water. MPs were conjugated with monosaccharides, oligosaccharides, and polysaccharides under wet reaction conditions at 37 °C. The conjugation was verified by SDS-PAGE, FT-IR and amino acid analyses. MPs conjugated with dextran (DX) exhibited a higher solubility and dispersion stability in water, which corresponded to smaller particle size and more uniform distribution (P < 0.05). According to secondary and tertiary structure analyses, the loss of α-helix structures and unfolding of the MPs appear to be the main reasons for MP solubilization. Additionally, according to the zeta-potential, confocal laser scanning microscopy, and atomic force microscopy observation results, glycation can provide electrostatic repulsion or steric hindrance to disintegrate existing filamentous myosin aggregates and inhibit further self-assembly behavior.