ChatGPT Earns American Board Certification in Hand Surgery.

PURPOSE: Artificial Intelligence (AI), and specifically ChatGPT, has shown potential in healthcare, yet its performance in specialized medical examinations such as the Orthopaedic Surgery In-Training Examination and European Board Hand Surgery diploma has been inconsistent. This study aims to evaluate the capability of ChatGPT-4 to pass the American Hand Surgery Certifying Examination. METHODS: ChatGPT-4 was tested on the 2019 American Society for Surgery of the Hand (ASSH) Self-Assessment Exam. All 200 questions available online (https://onlinecme.assh.org) were retrieved. All media-containing questions were flagged and carefully reviewed. Eight media-containing questions were excluded as they either relied purely on videos or could not be rationalized from the presented information. Descriptive statistics were used to summarize the performance (% correct) of ChatGPT-4. The ASSH report was used to compare ChatGPT-4's performance to that of the 322 physicians who completed the 2019 ASSH self-assessment. RESULTS: ChatGPT-4 answered 192 questions with an overall score of 61.98%. Performance on media-containing questions was 55.56%, while on non-media questions it was 65.83%, with no statistical difference in performance based on media inclusion. Despite scoring below the average physician's performance, ChatGPT-4 outperformed in the 'vascular' section with 81.82%. Its performance was lower in the 'bone and joint' (48.54%) and 'neuromuscular' (56.25%) sections. CONCLUSIONS: ChatGPT-4 achieved a good overall score of 61.98%. This AI language model demonstrates significant capability in processing and answering specialized medical examination questions, albeit with room for improvement in areas requiring complex clinical judgment and nuanced interpretation. ChatGPT-4's proficiency is influenced by the structure and language of the examination, with no replacement for the depth of trained medical specialists. This study underscores the supportive role of AI in medical education and clinical decision-making while highlighting the current limitations in nuanced fields such as hand surgery.

Open reduction and internal fixation of a radius and ulna fracture in a patient with an elbow arthrodesis: a case report.

This case report outlines the effective use of the Titanium Elastic Nail System (TENS) for treating a peri-implant mid-shaft radius and ulna fracture in a patient with previous elbow arthrodesis and rotational full-thickness flap coverage. Given the paucity of literature surrounding this complex problem, we present a minimally - invasive treatment option which facilitated complete fracture healing, demonstrating the TENS's efficacy in complex orthopedic scenarios.

Radiologic anatomic study of the humeral medullary canal.

Hypothesis/Background: Patient-specific implants have become an increasingly researched area to improve surgical outcomes. Patient-specific implants have been suggested to provide advantages for better implant alignment and thus improve surgical outcomes. One such area for application is in the use of intramedullary nails for humeral fracture stabilization. However, the anatomy of the canal is not well defined, especially in a larger scale demographic study. Methods: In this observational cross-sectional study, axial computed tomography scans of 150 humeri were used to measure the cortical thickness and canal width in both coronal and sagittal orientations. Measurements were made at 7 evenly spaced levels along the humerus from the surgical neck to the point immediately superior to the supracondylar ridge. X-rays were used to measure the valgus, recurvatum, and procurvatum angles, along with their associated locations. Demographic data recorded included age, gender, body mass index (BMI), race, and ethnicity. Results: The mean coronal canal widths decreased inferiorly from the surgical neck to midshaft before increasing to the supracondylar fossa. Mean sagittal widths decreased along the complete course of the canal. The ratio of coronal to sagittal canal widths decreased from 1.09 at level 1 to 0.83 at level 5 before increasing to 1.30 at level 7. Females had significantly smaller canal widths and cortex thicknesses in both the sagittal and coronal planes throughout the course of the canal. There were no significant differences in canal widths among ethnicities. Age was positively correlated with the canal width in the coronal and sagittal orientations but was negatively correlated with cortical thickness in all 7 levels. BMI was not significantly correlated with canal width. Conclusion/Discussion: The data included in this study may be used to determine standard widths and measurements of the humerus. However, there are notable patterns or differences in the shape of the medullary canal of the humerus between subgroups. This study is the first to conduct a larger scale demographic investigation comparing the humeral canal characteristics among sex, ethnicity, age, and BMI. These data may serve as a platform to further investigate the course of the medullary canal.

Arthroscopic Saucerization and Repair of a Torn Medial Discoid Meniscus.

A discoid meniscus is a congenital abnormality that usually affects the lateral meniscus, leading to instability and increased risk of tearing. A discoid medial meniscus is an extremely rare pathology that is seldom described in literature. In this report, we present the technique of operative treatment of a symptomatic, torn discoid medial meniscus. The meniscus is saucerized to 6-8 mm of stable rim, and the inside-out technique is used as the modality of meniscal fixation. Although a discoid medial meniscus is an uncommon finding, all treating surgeons should be aware of the possibility during surgical intervention.

Decreased Complication Rate Using Partially Threaded Compared With Fully Threaded Compression Screws in 4 Corner Arthrodesis: A Retrospective Study.

BACKGROUND: Scapho-lunate advanced collapse (SLAC) and scaphoid nonunion advanced collapse (SNAC) of the wrist are the most common types of wrist arthritis. We compared the union rate and complication profile of patients with SLAC and SNAC wrist undergoing 4 corner arthrodesis with partially threaded or fully threaded headless compression screws. METHODS: A single-center retrospective review was conducted to identify all patients treated for SLAC and SNAC with 4 corner fusion using headless compression screws from 2016 to 2021. A total of 33 patients undergoing surgery on 35 wrists were identified and included in the study. Demographics, comorbidities, complication profile, and radiographs were collected and compared between groups. RESULTS: One hundred percent (16/16) of partially threaded and 84.2% (16/19) of fully threaded screws demonstrated union by minimum 10-week follow-up. The total complication rate (avascular necrosis of lunate, screw loosening, etc.) was 31.4%; 52.6% of wrists implanted with fully threaded screws experienced complications compared with a 6.3% complication rate with partially threaded screws. The difference was statistically significant between the 2 groups (P = .004). CONCLUSIONS: Four corner arthrodesis using antegrade compression screws is an effective, reproducible method to achieve fusion in the wrist. The use of fully threaded screws was associated with more complications than with partially threaded screws, although union rate was not significantly different. Future studies with larger sample sizes would be useful to fully elucidate differences between these 2 constructs.

Treatment, Return to Play, and Performance Following Meniscus Surgery.

PURPOSE OF REVIEW: The standard of care in meniscal tear management is constantly evolving, especially for athletes and high-demand patients. Meniscus repairs, meniscus transplants, and partial meniscectomies are commonly performed, and rehabilitation methods following these operations are becoming more sophisticated. The ultimate goal of these procedures is returning patients to full activity with minimal risks. Return to play should be systematic, pathology dependent, and individualized to an athlete's needs, expectations, and level of play. This article provides a review of the current treatment modalities of meniscus tears, the rehabilitation protocols following each modality, and the return to play criteria that must be met before releasing the player to competition. In addition, it overviews articles that describe performance outcomes of patients that have undergone meniscus surgery. RECENT FINDINGS: Current research shows high return to play rates for athletes that undergo meniscus surgery and describes effective rehabilitation protocols to facilitate recovery. There is an increased emphasis on meniscus preservation in recent literature. In addition, meniscus allograft transplantation has demonstrated its efficacy as a salvage procedure and has become a stronger consideration in the athlete with meniscus pathology. No standardized return to play protocol can be applied uniformly to all kinds of meniscal surgeries, and two athletes with the same pathology cannot be expected to follow identical paths towards full recovery. A multidisciplinary approach to care should be provided to the patients, and in the case of patients with high levels of athleticism, the road to recovery starts even before the injury itself.

Union Following Biological and Rigid Fixations of Distal Tibia Extra-articular Fractures.

BACKGROUND: Distal tibia fractures are among the most common bony injuries, with a significant rate of nonunion and delayed union. There are multiple methods for the management of distal tibia fractures. Among the plating methods, there are bridge plating and compression plating techniques. There is still a lack of evidence about whether one method has a higher rate of union than the other. The present study aimed to assess the union rate of extra-articular distal tibia fractures using biological fixation with bridge plating and rigid fixation with compression plating. METHODS: This retrospective analysis was performed on 41 adult patients with distal tibia fractures. The subjects were divided into two groups based on the fixation method, namely bridge plating and compression plating. Baseline characteristics, fracture characteristics, and union status were analyzed and compared in this study. RESULTS: Baseline and fracture characteristics were similar between the groups. Only higher translation in any planes was noted in the bridge plating group (2.80±3.04 mm; P<0.001). As for union status, the rates of the union during 3 months and delayed/no union were similar between the two groups (P=0.18). During a 6-month follow-up, 92% and 93.8% of the patients achieved union in the bridge plating and compression plating groups, respectively. CONCLUSION: Rates of delayed union and nonunion are similar regarding extra-articular distal tibia fractures treated with either bridge plating or compression plating.