Cost-Effective and Scalable Solar Interface Evaporators Derived from Industry Waste for Efficient Solar Steam Generation.

Interfacial solar steam generation for sustainable and eco-friendly desalination and wastewater treatment has attracted much attention. However, costly raw materials and complex preparation processes pose constant challenges to its wide promotion. Herein, a novel, cost-effective, and scalable strategy is presented for preparing solar interface evaporators using industrial waste as a raw material. Modified polyethylene foam evaporators (M-EPEs) are simply prepared by drilling and then hydrophilic modification of industrial waste (EPE-1). M-EPEs not only retain the strong mechanical properties and thermal insulating properties (0.047 W·m-1·K-1) of EPE-1 but also exhibit superhydrophilicity and strong light absorption (over 90%). M-EPEs achieve a high evaporation rate of 1.497 kg·m-2·h-1 and photothermal efficiency of up to 93.8% under 1 kW·m-2 solar illumination. Moreover, it has excellent stability and salt tolerance. Our work addresses the environmental issues of recycling polyethylene waste and provides a facile and efficient strategy for designing low-cost, large-scale solar interface evaporators for desalination.

Virome of wild rats (Rattus norvegicus) captured far from pig farms in Jiangsu province of China reveals novel porcine circovirus type 2d (PCV2d) sequences.

BACKGROUND: Porcine circovirus type 2 (PCV2) has caused great economic losses in the global pig industry. There have been published records of wild rats acting as the reservoirs of PCV2 (only PCV2a and PCV2b), but almost all of which were related to the PCV2-infected swine herds. RESULTS: In this study, we carried out the detection, amplification, and characterization of novel PCV2 strains in wild rats that were captured far from pig farms. Nested PCR assay demonstrated that the kidney, heart, lung, liver, pancreas, and large and small intestines of rats were screened positive for PCV2. We subsequently sequenced two full genomes of PCV2 in positive sample pools, designated as js2021-Rt001 and js2021-Rt002. Genome sequence analysis indicated that they had the highest similarity to nucleotide sequences of porcine-origin PCV2 isolates in Vietnam. Phylogenetically, js2021-Rt001 and js2021-Rt002 were a part of the PCV2d genotype cluster, which is a predominant genotype circulating worldwide in recent years. The antibody recognition regions, immunodominant decoy epitope, and heparin sulfate binding motif of the two complete genome sequences coincided with those previously reported. CONCLUSIONS: Our research reported the genomic characterization of two novel PCV2 strains (js2021-Rt001 and js2021-Rt002) and provided the first supported evidence that PCV2d could naturally infect wild rats in China. However, whether the newly identified strains have potential for circulating in nature in vertical and horizontal transmission or inter-species jumping between rats and pigs needs further research.

Cost-effective Bi2WO6 for efficient degradation of rhodamine B and tetracycline.

The morphology-controlled synthesis of nanostructured photocatalysts by an environmentally friendly and low-cost method provides a feasible way to realize practical applications of photocatalysts. Herein, Bi2WO6 (BWO) nanophotocatalysts with mulberry shape, sheet-like, and round-cake morphologies have been successfully synthesized through a highly facile solvothermal process by simply adjusting the solvothermal temperature or utilizing selective addition of ethylene glycol as an orientation agent without using strong acids and bases and/or hazardous chemicals. The ratio of ethylene glycol and glacial acetic acid can affect the morphology and oxygen vacancy content of BWO, thereby influencing the photocatalytic performance. The photocatalytic activity of the as-prepared samples was evaluated by degradation of rhodamine B (RhB) and tetracycline under visible-light irradiation. The results indicated that all the BWO samples exhibited morphology-associated photocatalytic activity, and the sheet-like structure of BWO obtained via solvothermal treatment at 120 °C with ethylene glycol and glacial acetic acid ratio of 1:3 achieved the maximum specific surface area and possessed abundant oxygen vacancies, exhibiting outstanding photocatalytic activity for degradation of RhB and tetracycline. The degradation rate of RhB reached 100% within 20 min. To the best of our knowledge, this value is one of the most remarkable values for pristine BWO photocatalysts. Radical capture experiments demonstrated that hydroxyl radicals (·OH) play major roles compared with electrons (e-) and holes (h+) in the photocatalytic degradation process. A possible mechanism for the photocatalytic degradation of pollutants was proposed to better understand the reaction process. We believe that the more economical, efficient and greener methodology can provide guidance to develop highly efficient photocatalysts with favourable morphology and structure. Supplementary Information: The online version contains supplementary material available at 10.1007/s10854-022-09654-z.

Fe3O4/PPy-Coated Superhydrophilic Polymer Porous Foam: A Double Layered Photothermal Material with a Synergistic Light-to-Thermal Conversion Effect toward Desalination.

Solar steam generation has been considered as one of the most promising strategies for production of fresh water using renewable solar energy. Herein, we prepared a polymer porous foam (HPSS) by a facile hydrothermal method. The HPSS presents a superhydrophilic wettability, an interpenetrating macroporous structure, and low thermal conductivity, which can well satisfy the criteria as an ideal candidate for photothermal materials. The HPSS/Fe3O4/PPy (polypyrrole) evaporator, of which a Fe3O4/PPy binary optical system served as a light absorption layer and HPSS was used as a porous substrate, was constructed through in situ growth of Fe3O4 particles followed by interfacial polymerization of PPy on the surface of HPSS. HPSS/Fe3O4/PPy shows an excellent light absorption capacity (92%) and photothermal conversion performance, with the solar energy conversion efficiency reaching up to 94.7% under 1 sun irradiation, which is much higher than that of HPSS/PPy (84.8%) composed of a unitary PPy light absorption layer. Interestingly, the presence of Fe3O4 particles could make directional migration in a magnetic field possible, thus facilitating its recovery as a self-floating solar generator in an open water area. Moreover, the HPSS/Fe3O4/PPy evaporator displays outstanding salt resistance properties and stability in various saline solutions, thus having great potential in practical desalination.

A versatile Y shaped DNA nanostructure for simple, rapid and one-step detection of mycotoxins.

A versatile Y shaped DNA nanostructure has been developed for simple, rapid and one-step simultaneous detection aflatoxin B1 (AFB1) and ochratoxin A (OTA). Y shaped duplex DNA arms was formed with two DNA tweezer at the ends. The aptamer sequence at the third end can bind to its target mycotoxins with strong affinity and then release the two DNA fragments. The released DNA fragments can open the DNA tweezers at the ends of Y shaped DNA arm. The amounts of AFB1 and OTA can be quantitative detection through the recovery of the fluorescent intensities. This strategy is simple and rapid with self-powered DNA hybridization reaction to control the "open" of Y shaped DNA tweezers. Furthermore, it can be finished in 60 min with only one-step of operation. The linear range of AFB1 was from 0.5 to 200 ng/mL (R2 = 0.995) and linear relationship of OTA was obtained from 4 to 300 ng/mL (R2 = 0.990). It also has been successfully applied for mycotoxins detection in real food samples. Importantly, the target mycotoxins can be extended to others by simply replacing the corresponding aptamer sequences.

Expanding known viral diversity in plants: virome of 161 species alongside an ancient canal.

BACKGROUND: Since viral metagenomic approach was applied to discover plant viruses for the first time in 2006, many plant viruses had been identified from cultivated and non-cultivated plants. These previous researches exposed that the viral communities (virome) of plants have still largely uncharacterized. Here, we investigated the virome in 161 species belonging to 38 plant orders found in a riverside ecosystem. RESULTS: We identified 245 distinct plant-associated virus genomes (88 DNA and 157 RNA viruses) belonging to 27 known viral families, orders, or unclassified virus groups. Some viral genomes were sufficiently divergent to comprise new species, genera, families, or even orders. Some groups of viruses were detected that currently are only known to infect organisms other than plants. It indicates a wider host range for members of these clades than previously recognized theoretically. We cannot rule out that some viruses could be from plant contaminating organisms, although some methods were taken to get rid of them as much as possible. The same viral species could be found in different plants and co-infections were common. CONCLUSIONS: Our data describe a complex viral community within a single plant ecosystem and expand our understanding of plant-associated viral diversity and their possible host ranges.

High-Performance Salt-Rejecting and Cost-Effective Superhydrophilic Porous Monolithic Polymer Foam for Solar Steam Generation.

Direct solar desalination with excellent solar photothermal efficiency, lower cost, and extended generator device lifetime is beneficial to increase potable water supplies. To address fundamental challenges in direct solar desalination, herein, we present a new and facile method for the scalable fabrication of the polymer porous foam (VMP) as salt-resistant photothermal materials, which was synthesized through a one-step hydrothermal method using styrene and 1-vinyl-3-ethylimidazolium tetrafluoroborate as monomers and N,N'-methylenebisacrylamide as the cross-linking agent. The as-resulted VMP shows excellent mechanical properties which could have a compression strain of 30%, resulting in its superior processability for practical operation. In addition, by taking advantage of its inherent low density, well-controlled porous structure (porosity is 73.81%), and extremely low thermal conductivity (0.03204 W m-1 K-1), the VMP exhibits an excellent solar evaporation property, and the solar photothermal efficiency can reach more than 88% under 1 kW m-2 irradiation. Moreover, the introduction of ionic liquid moiety (imidazolium tetrafluoroborate) into VMP results in its interesting superhydrophilic wettability, which can accelerate water transportation (wetting in 5s) and resolve the crystalline salt within 1.13 h. In addition, the interconnected macropores of the VMP, as water channels, can replenish the vaporized brine on the surface to prevent salt from adhering. The VMP shows a salt-resistant performance, for example, its solar evaporation efficiency remains nearly unchanged after 6 h duration under 1 sun irradiation. Based on its simple and cost-effective manufacturing process, excellent solar photothermal efficiency, and salt resistance, our VMP may be a promising candidate as photothermal materials for practical desalination from seawater and other wastewater.

Facile and Scalable Fabrication of Surface-Modified Sponge for Efficient Solar Steam Generation.

Solar steam generation is a highly promising technology for harvesting solar energy and desalination. Here, a new solar steam generation system is introduced based on a surface-modified polyurethane sponge with bilayered structures for efficient solar steam generation. The top layer, coated with polydimethylsiloxane-modified graphite powder, serves as light-to-heat conversion layer with a broad optical absorption, whereas the lower part of the sponge acts as a thermal insulator with a low thermal conductivity in the wet state (0.13882 W m-1 K-1 ). In addition, the strong hydrophobic wettability of the top layer (water contact angle: 148°) enables self-floating behavior on water, which is beneficial for practical applications. The results show that compared with a silver-nanoparticle-doped sponge and an acid-etched sponge doped with silver nanoparticles the graphite-modified sponge (GS) exhibits the highest evaporation efficiency of 73.3 % under 1 kW m2 irradiation, which is 2.6 times that of pure water and far higher than that of untreated polyurethane sponge (36.0 %). The GS shows excellent stability, and its evaporation efficiency remains unchanged even after immersion in water for one month. Based on its cost-efficient, simple, and scalable manufacturing process, excellent mechanical stability, and high recyclability, the GS shows great potential as an efficient photothermal material for a wide range of large-scale applications such as solar steam generation, light absorption, heat localization, and seawater desalination.