Steering the Reaction Pathway of CO2 Electroreduction by Tuning the Coordination Number of Copper Catalysts.

Cu-based catalysts are optimal for the electroreduction of CO2 to generate hydrocarbon products. However, controlling product distribution remains a challenging topic. The theoretical investigations have revealed that the coordination number (CN) of Cu considerably influences the adsorption energy of *CO intermediates, thereby affecting the reaction pathway. Cu catalysts with different CNs were fabricated by reducing CuO precursors via cyclic voltammetry (Cyc-Cu), potentiostatic electrolysis (Pot-Cu), and pulsed electrolysis (Pul-Cu), respectively. High-CN Cu catalysts predominantly generate C2+ products, while low-CN Cu favors CH4 production. For instance, over the high-CN Pot-Cu, C2+ is the main product, with the Faradaic efficiency (FE) reaching 82.5% and a partial current density (j) of 514.3 mA cm-2. Conversely, the low-CN Pul(3)-Cu favors the production of CH4, achieving the highest FECH4 value of 56.7% with a jCH4 value of 234.4 mA cm-2. In situ X-ray absorption spectroscopy and Raman spectroscopy studies further confirm the different *CO adsorptions over Cu catalysts with different CN, thereby directing the reaction pathway of the CO2RR.

Pregnancy-induced physiological hypertrophic preconditioning attenuates pathological myocardial hypertrophy by activation of FoxO3a.

Previous studies show a woman's pregnancy is correlated with post-reproductive longevity, and nulliparity is associated with higher risk of incident heart failure, suggesting pregnancy likely exerts a cardioprotection. We previously reported a cardioprotective phenomenon termed myocardial hypertrophic preconditioning, but it is unknown whether pregnancy-induced physiological hypertrophic preconditioning (PHP) can also protect the heart against subsequent pathological hypertrophic stress. We aimed to clarify the phenomenon of PHP and its mechanisms. The pluripara mice whose pregnancy-induced physiological hypertrophy regressed and the nulliparous mice underwent angiotensin II (Ang II) infusion or transverse aortic constriction (TAC). Echocardiography, invasive left ventricular hemodynamic measurement and histological analysis were used to evaluate cardiac remodeling and function. Silencing or overexpression of Foxo3 by adeno-associated virus was used to investigate the role of FoxO3a involved in the antihypertrophic effect. Compared with nulliparous mice, pathological cardiac hypertrophy induced by Ang II infusion, or TAC was significantly attenuated and heart failure induced by TAC was markedly improved in mice with PHP. Activation of FoxO3a was significantly enhanced in the hearts of postpartum mice. FoxO3a inhibited myocardial hypertrophy by suppressing signaling pathway of phosphorylated glycogen synthase kinase-3ß (p-GSK3ß)/ß-catenin/Cyclin D1. Silencing or overexpression of Foxo3 attenuated or enhanced the anti-hypertrophic effect of PHP in mice with pathological stimulation. Our findings demonstrate that PHP confers resistance to subsequent hypertrophic stress and slows progression to heart failure through activation of FoxO3a/GSK3ß pathway.

Optimizing Analysis Methods: Rapid and Accurate Determination of Cuaminosulfate Residues with LC-MS/MS Based on Box-Behnken Design Study.

In view of the defects in the previous detection of cuaminosulfate, which only focused on the analysis of copper ions, there is currently no analysis method available to determine the actual state of cuaminosulfate as chelated or bound. In order to investigate the dissipation and terminal residues in soil and watermelon of cuaminosulfate for food safety and environmental risk, a highly effective technique was developed to detect cuaminosulfate residues in watermelon and soil, and field experiments were conducted in China. After single-factor experiments, residual cuaminosulfate in samples was extracted by pure water, purified using a liquid-liquid approach combined with a dispersive solid-phase extraction, and detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). The Box-Behnken design (BBD) study was used to find the optimal solutions for the time of liquid-liquid purification, the amount of extraction solvent, and the amounts of cleanup sorbents for the analytical method. The average recovery of the method was in the range of 80.0% to 101.1%, the average relative standard deviation (RSD) was 5.3-9.9%, and the detection limit was lower than 0.05 mg/kg. The BBD study not only improved the extraction rate of the method, but also saved time and was operated easily. The final residues of cuaminosulfate in watermelon at different sampling intervals were all lower than 0.05 mg/kg under field conditions. The cuaminosulfate in soils dissipated following exponential kinetics, with half-life values in the range of 9.39 to 12.58 days, which varied by different locations. Based on the validated method, food safety residues and soil residues can be determined rapidly and accurately.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene.

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Lattice Strain Engineering Boosts CO2 Electroreduction to C2+ Products.

Regulating the binding effect between the surface of an electrode material and reaction intermediates is essential in highly efficient CO2 electro-reduction to produce high-value multicarbon (C2+) compounds. Theoretical study reveals that lattice tensile strain in single-component Cu catalysts can reduce the dipole-dipole repulsion between *CO intermediates and promotes *OH adsorption, and the high *CO and *OH coverage decreases the energy barrier for C-C coupling. In this work, Cu catalysts with varying lattice tensile strain were fabricated by electro-reducing CuO precursors with different crystallinity, without adding any extra components. The as-prepared single-component Cu catalysts were used for CO2 electro-reduction, and it is discovered that the lattice tensile strain in Cu could enhance the Faradaic efficiency (FE) of C2+ products effectively. Especially, the as-prepared CuTPA catalyst with high lattice tensile strain achieves a FEC2+ of 90.9% at -1.25 V vs. RHE with a partial current density of 486.1 mA cm-2.

Cooperation of Different Active Sites to Promote CO2 Electroreduction to Multi-carbon Products at Ampere-Level.

Electroreduction of CO2 to C2+ products provides a promising strategy for reaching the goal of carbon neutrality. However, achieving high selectivity of C2+ products at high current density remains a challenge. In this work, we designed and prepared a multi-sites catalyst, in which Pd was atomically dispersed in Cu (Pd-Cu). It was found that the Pd-Cu catalyst had excellent performance for producing C2+ products from CO2 electroreduction. The Faradaic efficiency (FE) of C2+ products could be maintained at approximately 80.8 %, even at a high current density of 0.8 A cm-2 for at least 20 hours. In addition, the FE of C2+ products was above 70 % at 1.4 A cm-2. Experiments and density functional theory (DFT) calculations revealed that the catalyst had three distinct catalytic sites. These three active sites allowed for efficient conversion of CO2, water dissociation, and CO conversion, ultimately leading to high yields of C2+ products.

Ternary Ionic-Liquid-Based Electrolyte Enables Efficient Electro-reduction of CO2 over Bulk Metal Electrodes.

Using bulk metals as catalysts to get high efficiency in electro-reduction of CO2 is ideal but challenging. Here, we report the coupling of bulk metal electrodes and a ternary ionic-liquid-based electrolyte, 1-butyl-3-methylimidazolium tetrafluoroborate/1-dodecyl-3-methylimidazolium tetrafluoroborate/MeCN to realize highly efficient electro-reduction of CO2 to CO. Over various bulk metal electrodes, the ternary electrolyte not only increases the current density but also suppresses the hydrogen evolution reaction to obtain a high Faradaic efficiency (FE) toward CO. FECO could maintain ∼100% over a wide potential range, and metal electrodes showed very high stability in the ternary electrolyte. It is demonstrated that the aggregation behavior of the ternary electrolyte and the arrangement of two kinds of IL cations with different chain lengths in the electrochemical double layer not only increase the wettability to electrode and CO2 adsorption but also extend the diffusion channel of H+, rendering the high current density and FECO.

Adjacent Copper Single Atoms Promote C-C Coupling in Electrochemical CO2 Reduction for the Efficient Conversion of Ethanol.

The electrochemical CO2 reduction reaction (CO2RR) using renewable electricity is one of the most promising strategies for reaching the goal of carbon neutrality. Multicarbonous (C2+) products have broad applications, and ethanol is a valuable chemical and fuel. Many Cu-based catalysts have been reported to be efficient for the electrocatalytic CO2RR to C2+ products, but they generally offer limited selectivity and current density toward ethanol. Herein, we proposed a silica-mediated hydrogen-bonded organic framework (HOF)-templated approach to preparing ultrahigh-density Cu single-atom catalysts (SACs) on thin-walled N-doped carbon nanotubes (TWN). The content of Cu in the catalysts prepared by this method could be up to 13.35 wt %. It was found that the catalysts showed outstanding performance for the electrochemical CO2RR to ethanol, and the Faradaic efficiency (FE) of ethanol increased with the increase in Cu-N3 site density. The FE of ethanol over the catalysts with 13.35 wt % Cu could reach ∼81.9% with a partial current density of 35.6 mA cm-2 using an H-type cell, which is the best result for electrochemical CO2RR to ethanol to date. In addition, the catalyst could be stably used for more than 25 h. Experimental and density functional theory (DFT) studies revealed that the adjacent Cu-N3 active sites (one Cu atom coordinates with three N) were the active sites for the reaction, and their high density was crucial for the high FE of ethanol because the adjacent Cu-N3 sites with a short distance could promote the C-C coupling synergistically.

Embedding Ru Clusters and Single Atoms into Perovskite Oxide Boosts Nitrogen Fixation and Affords Ultrahigh Ammonia Yield Rate.

Ammonia is a key chemical feedstock worldwide. Compared with the well-known Haber-Bosch method, electrocatalytic nitrogen reduction reaction (ENRR) can eventually consume less energy and have less CO2 emission. In this study, a plasma-enhanced chemical vapor deposition method is used to anchor transition metal element onto 2D conductive material. Among all attempts, Ru single-atom and Ru-cluster-embedded perovskite oxide are discovered with promising electrocatalysis performance for ENRR (NH3 yield rate of up to 137.5 ± 5.8 µg h-1  mgcat -1 and Faradaic efficiency of unexpected 56.9 ± 4.1%), reaching the top record of Ru-based catalysts reported so far. In situ experiments and density functional theory calculations confirm that the existence of Ru clusters can regulate the electronic structure of Ru single atoms and decrease the energy barrier of the first hydrogenation step (*NN to *NNH). Anchoring Ru onto various 2D perovskite oxides (LaMO-Ru, MCr, Mn, Co, or Ni) also show boosted ENRR performance. Not only this study provides an unique strategy toward transition-metal-anchored new 2D conductive materials, but also paves the way for fundamental understanding the correlation between cluster-involved single-atom sites and catalytic performance.

P-Band Intermediate States Mediate Electron Transfer at Confined Nanoscale.

In this Perspective, mainly based on the model of structural water molecules (SWs) as bright color emitters, we briefly summarize the development and theoretical elaboration of P-band intermediate state (PBIS) theory as well as its application in several typical catalytic redox reactions. In addition, with a simple equation (2∫ψ2σ1' + ∫ψ2σ2 + ∫ψ2π = 1), we clearly define how the interface states correlate with the three basic parameters of heterogeneous catalysis (conversion, selectivity, and stability), and what is the dynamic nature of catalytic active sites. Overall, the proposal of SW-dominated PBIS theory establishes an internal physical connection between the decay kinetics of excited electrons and the catalytic reaction kinetics and provides new insights into the physical origin of photoluminescence emission of low-dimensional quantum nanodots and the physical nature of nanoconfinement and nanoconfined catalysis.

Evidence of solvent-mediated proton transfer during H2O2 activation in titanosilicate-catalyzed oxidation systems.

The catalytic performance of titanosilicates involving hydrogen peroxide (H2O2) as the oxidant is strongly influenced by the solvents. Until now, there is still a lack of a universal principle that can guide the choice of a solvent. Herein, the kinetics of H2O2 activation catalyzed by various titanosilicates in different solvents is investigated, and an isokinetic compensation effect is concluded. This indicates that the solvent participates in the H2O2 activation process for the formation of a Ti-OOH species. Additionally, the results of isotopically labeled infrared spectra preliminarily confirm that the solvent acts as the mediator to promote the proton transfer during the H2O2 activation process. The catalytic activities of a series of TS-1 catalysts toward 1-hexene epoxidation are compared, which include Ti(OSi)3OH species with a range of densities but a constant total Ti content. This reveals that the solvent effect is closely related to the Ti active sites of these TS-1 catalysts. Based on these results, a principle for the rational choice of solvent for this catalytic process is proposed. ROH is found to be the mediator for Ti(OSi)4 sites, and methanol, which has a strong proton-donating ability, is the best solvent for these sites. However, for the Ti(OSi)3OH sites, water (H2O) is the mediator, and a weaker hydrogen bonding between H2O molecules promotes proton transfer more effectively. The solvent influences the catalytic performance by perturbing the hydrogen bonds between the H2O molecules, and aprotic acetonitrile, which has a strong ability to break the hydrogen bonding network between H2O molecules, is the best solvent for Ti(OSi)3OH sites. This study provides experimental evidence that the solvent promotes the catalytic performance of titanosilicates by assisting the proton transfer during the catalytic H2O2 activation process, which will pave the way toward the rational choice of solvent for the titanosilicate-catalyzed oxidation systems.

Genome-Wide Identification of PAP1 Direct Targets in Regulating Seed Anthocyanin Biosynthesis in Arabidopsis.

Anthocyanins are widespread water-soluble pigments in the plant kingdom. Anthocyanin accumulation is activated by the MYB-bHLH-WD40 (MBW) protein complex. In Arabidopsis, the R2R3-MYB transcription factor PAP1 activates anthocyanin biosynthesis. While prior research primarily focused on seedlings, seeds received limited attention. This study explores PAP1's genome-wide target genes in anthocyanin biosynthesis in seeds. Our findings confirm that PAP1 is a positive regulator of anthocyanin biosynthesis in Arabidopsis seeds. PAP1 significantly increased anthocyanin content in developing and mature seeds in Arabidopsis. Transcriptome analysis at 12 days after pollination reveals the upregulation of numerous genes involved in anthocyanin accumulation in 35S:PAP1 developing seeds. Chromatin immunoprecipitation and dual luciferase reporter assays demonstrate PAP1's direct promotion of ten key genes and indirect upregulation of TT8, TTG1, and eight key genes during seed maturation, thus enhancing seed anthocyanin accumulation. These findings enhance our understanding of PAP1's novel role in regulating anthocyanin accumulation in Arabidopsis seeds.

Selective Hydrodeoxygenation of Aromatics to Cyclohexanols over Ru Single Atoms Supported on CeO2.

Cyclohexanols are widely used chemicals, which are mainly produced by oxidation of fossil feedstocks. Selective hydrodeoxygenation of lignin derivatives has great potential for producing these chemicals but is challenging to obtain high yields. Here, we report that CeO2-supported Ru single-atom catalysts (SACs) enabled the hydrogenation of the benzene ring and catalyzed etheric C-O(R) bond cleavage without changing the C-O(H) bond, which could afford 99.9% yields of cyclohexanols. As far as we know, this is the first to report that SACs catalyze hydrogenation of the aromatic ring. The reaction mechanism was studied by control experiments and density functional theory calculations. In the catalysts, the Ru-O-Ce sites were formed and one Ru atom was coordinated with about four O atoms. These catalytic sites could realize both the hydrogenation and deoxygenation reactions efficiently, and thus desired cyclohexanols were generated. This work pioneers the single-atom catalysis in aromatic transformation and provides a novel route for synthesis of cyclohexanols.

Green Carbon Science: Efficient Carbon Resource Processing, Utilization, and Recycling towards Carbon Neutrality.

Green carbon science is defined as the "study and optimization of the transformation of carbon-containing compounds and the relevant processes involved in the entire carbon cycle from carbon resource processing, carbon energy utilization, CO2 fixation, and carbon recycling to utilize carbon resources efficiently and minimize the net CO2 emission."[1] Green carbon science is related closely to carbon neutrality, and relevant fields have developed quickly in the last decade. In this Minireview, we propose the concept of carbon energy index, and the recent progress in petroleum refining, and the production of liquid fuels, chemicals, and materials using coal, methane, CO2 , biomass, and waste plastics is highlighted in combination with green carbon science. An outlook for these important fields is provided in the final section.

Green Carbon Science: Keeping the Pace in Practice.

The concept of green carbon science is to promote the goal of achieving carbon neutrality, the importance and urgency of which have been well-recognized and received worldwide attention. Carbon neutrality has become the focus of research work in many fields, and correspondingly, a growing number of papers and publications have been published over the last few years. However, since carbon neutralization is a real problem that urgently requires technical solutions, the transition from fundamental research to practical applications must be accelerated. A number of research teams are bold in putting things into practice and blazing new trails. This Review summarizes the recent technological developments within the framework of green carbon science, focusing on conducted pilot tests, industrial demonstrations, and commercial applications beyond the laboratory stage.

Quantitative determination of pyriproxyfen and its metabolite residues in bee products of China using a modified QuEChERS approach with UPLC-MS/MS.

Given the key role of bees as indicators for environmental assessment, residues in bees and bee products have attracted great interest. In this regard, an improved, highly sensitive method for quantifying the insecticide pyriproxyfen and its four metabolites (4'-OH-Pyr, DPH-Pyr, 2-OH-PY, 4'-OH-POP) in honeybees, larvae, and bee products (honey, pollen, royal jelly and wax) should be established. For this purpose, we used ultra-performance liquid chromatography coupled with triple-quadrupole mass spectrometry for rapid quantification (≤5 min). Recoveries for various matrices ranged from 73.77% to 114.97%, with satisfactory intra-day and inter-day precision (relative standard deviations of 0.03-8.61% and 0.10-7.25%, respectively). The results demonstrated excellent linearity (R2 > 0.9903) with a limit of quantification of 1 µg/kg for six different matrices. We collected and analyzed 597 samples (honey, bees and wax) from four major beekeeping areas in China. Only 47 of these samples contained residues of pyriproxyfen and two of its metabolites (2-OH-PY, 4'-OH-Pyr), and high levels of contamination were found in bee samples (2-739 µg/kg), with substantive accumulation in wax (levels were 9.49% higher than in other samples). The result demonstrate that the method provides a reliable and convenient means of monitoring pyriproxyfen and its metabolites in bee products for better product quality, human health, and international commercial competition and also lays a foundation for risk assessment of potential pyriproxyfen contamination in China.

Hierarchical Metal-Polymer Hybrids for Enhanced CO2 Electroreduction.

The design of catalysts with high activity, selectivity, and stability is key to the electroreduction of CO2 . Herein, we report the synthesis of 3D hierarchical metal/polymer-carbon paper (M/polymer-CP) electrodes by in situ electrosynthesis. The 3D polymer layer on CP (polymer-CP) was first prepared by in situ electropolymerization, then a 3D metal layer was decorated on the polymer-CP to produce the M/polymer-CP electrode. Electrodes with different metals (e.g. Cu, Pd, Zn, Sn) and various polymers could be prepared by this method. The electrodes could efficiently reduce CO2 to desired products, such as C2 H4 , CO, and HCOOH, depending on the metal used. For example, C2 H4 could be formed with a Faradaic efficiency of 59.4 % and a current density of 30.2 mA cm-2 by using a very stable Cu/PANI-CP electrode in an H-type cell. Control experiments and theoretical calculations showed that the 3D hierarchical structure of the metals and in situ formation of the electrodes are critical for the excellent performance.

[Safety of two ventilator weaning strategies after high-frequency oscillatory ventilation in preterm infants with respiratory distress syndrome: a prospective randomized controlled trial].

OBJECTIVE: To study the safety of two ventilator weaning strategies after high-frequency oscillatory ventilation (HFOV) for the treatment of neonatal respiratory distress syndrome (NRDS) in preterm infants. METHODS: A prospective randomized controlled trial was conducted for 101 preterm infants with NRDS, with a gestational age of ≤32+6 weeks or a birth weight of ≤1 500 g, who were admitted to the neonatal intensive care unit of Xiamen Maternal and Child Health Hospital from January 1, 2019 to June 30, 2020. The infants underwent HFOV as the preferred treatment. The infants were randomly divided into an observation group (50 infants with direct weaning from HFOV) and a control group (51 infants with weaning after HFOV was switched to conventional mechanical ventilation). The two groups were compared in terms of failure rate of ventilator weaning within 72 hours, changes in blood gas parameters at 2 hours before weaning and at 2 and 24 hours after weaning, respiratory support therapy, incidence rates of complications, and outcome at discharge. RESULTS: There was no significant difference in the failure rate of ventilator weaning within 72 hours (8% vs 14%, P > 0.05). The observation group had a significantly shorter duration of mechanical ventilation than the control group [(64±39) hours vs (88±69) hours, P < 0.05]. There were no significant differences between the two groups in the duration of mechanical ventilation, total oxygen supply time, blood gas parameters before and after ventilator weaning, incidence rates of complications, and outcome at discharge (P > 0.05). CONCLUSIONS: For preterm infants with NRDS, the strategy of weaning directly from HFOV is safe and reliable and can reduce the duration of invasive mechanical ventilation, and therefore, it holds promise for clinical application.

Current status of group B Streptococcus infection in neonates: a multicenter prospective study. / 新生儿Bæ—é“¾çƒèŒæ„ŸæŸ“çŽ°çŠ¶çš„å¤šä¸­å¿ƒå‰çž»æ€§ç ”ç©¶.

OBJECTIVES: To investigate the incidence of maternal group B Streptococcus (GBS) colonization and neonatal early-onset GBS disease (GBS-EOD), and to study the factors associated with the development of GBS-EOD in the offspring of pregnant women with GBS colonization. METHODS: A total of 16 384 pregnant women and 16 634 neonates delivered by them were enrolled prospectively who had medical records in Xiamen Maternal and Child Care Hospital, Beijing Obstetrics and Gynecology Hospital of Capital Medical University, and Zhangzhou Zhengxing Hospital from May 1, 2019 to April 30, 2020. Unified GBS screening time, culture method, and indication for intrapartum antibiotic prophylaxis (IAP) were adopted in the three hospitals. The incidence rates of maternal GBS colonization and neonatal GBS-EOD were investigated. A multivariate logistic regression analysis was used to identify the factors associated with the development of GBS-EOD in the offspring of pregnant women with GBS colonization. RESULTS: In these three hospitals, the positive rate of GBS culture among the pregnant women in late pregnancy was 11.29% (1 850/16 384), and the incidence rate of neonatal GBS-EOD was 0.96‰ (16/16 634). The admission rate of live infants born to the GBS-positive pregnant women was higher than that of those born to the GBS-negative ones (P<0.05). The live infants born to the GBS-positive pregnant women had a higher incidence rate of GBS-EOD than those born to the GBS-negative ones [6.38‰ (12/1 881) vs 0.27‰ (4/14 725), P<0.05]. The multivariate logistic regression analysis showed that placental swabs positive for GBS and positive GBS in neonatal gastric juice at birth were independent predictive factors for the development of GBS-EOD (P<0.05), while adequate IAP was a protective factor (P<0.05) in the offspring of pregnant women with GBS colonization. CONCLUSIONS: GBS colonization of pregnant women in late pregnancy has adverse effects on their offspring. It is important to determine prenatal GBS colonization status of pregnant women and administer with adequate IAP based on the indications of IAP to reduce the incidence of neonatal GBS-EOD. Citation.

Etiological serotype and genotype distributions and clinical characteristics of group B streptococcus-inducing invasive disease among infants in South China.

BACKGROUND: Group B streptococcus (GBS)-induced invasive disease is a major cause of illness and death among infants aged under 90 days in China; however, invasive GBS infection remains unknown in China. We aimed to describe the serotype and genotype distributions of early-onset disease (EOD) and late-onset disease (LOD), and to show the clinical correlations among various GBS serotypes and genotypes obtained from infants with invasive GBS infections. METHODS: Between June 1, 2016 and June 1, 2018, 84 GBS strains were collected from patients younger than 90 days at seven Chinese hospitals. Clinical data were retrospectively reviewed. GBS serotyping was conducted and multi-locus sequence typing was performed. RESULTS: Serotypes Ia, Ib, II, III, and V were detected. Serotype III (60.71%) was the most common, followed by Ia (16.67%) and Ib (14.29%). Intrapartum temperature ≥ 37.5 °C, chorioamnionitis, and mortality were noted in 28.57, 42.86, and 28.57% of patients with serotype Ia, respectively, and these rates were higher than those in patients with serotypes Ib and III (P = 0.041, P = 0.031, and P = 0.023, respectively). The incidence of respiratory distress was lower (P = 0.039) while that of purulent meningitis was higher (P = 0.026) in the serotype III group. Eighteen sequence types were detected among isolates, and ST17 [42.86% (36/84)] was the most prevalent. CONCLUSIONS: GBS isolates belonging to serotypes Ia, Ib, and III are common in southern mainland China, and ST17 is highly prevalent. Differences were found in the clinical manifestations of invasive GBS disease induced by serotypes Ia and III.