Hydrogen-Deuterium Exchange Dynamics of NISTmAb Measured by Small Angle Neutron Scattering.

Understanding protein dynamics and conformational stability holds great significance in biopharmaceutical research. Hydrogen-deuterium exchange (HDX) is a quantitative methodology used to examine these fundamental properties of proteins. HDX involves measuring the exchange of solvent-accessible hydrogens with deuterium, which yields valuable insights into conformational fluctuations and conformational stability. While mass spectrometry is commonly used to measure HDX on the peptide level, we explore a different approach using small-angle neutron scattering (SANS). In this work, SANS is demonstrated as a complementary and noninvasive HDX method (HDX-SANS). By assessing subtle changes in the tertiary and quaternary structure during the exchange process in deuterated buffer, along with the influence of added electrolytes on protein stability, SANS is validated as a complementary HDX technique. The HDX of a model therapeutic antibody, NISTmAb, an IgG1κ, is monitored by HDX-SANS over many hours using several different formulations, including salts from the Hofmeister series of anions, such as sodium perchlorate, sodium thiocyanate, and sodium sulfate. The impact of these formulation conditions on the thermal stability of NISTmAb is probed by differential scanning calorimetry. The more destabilizing salts led to heightened conformational dynamics in mAb solutions even at temperatures significantly below the denaturation point. HDX-SANS is demonstrated as a sensitive and noninvasive technique for quantifying HDX kinetics directly in mAb solution, providing novel information about mAb conformational fluctuations. Therefore, HDX-SANS holds promise as a potential tool for assessing protein stability in formulation.

Role of Low Molecular Weight Polymers on the Dynamics of Silicon Anodes During Casting.

This work probes the slurry architecture of a high silicon content electrode slurry with and without low molecular weight polymeric dispersants as a function of shear rate to mimic electrode casting conditions for poly(acrylic acid) (PAA) and lithium neutralized poly(acrylic acid) (LiPAA) based electrodes. Rheology coupled ultra-small angle neutron scattering (rheo-USANS) was used to examine the aggregation and agglomeration behavior of each slurry as well as the overall shape of the aggregates. The addition of dispersant has opposing effects on slurries made with PAA or LiPAA binder. With a dispersant, there are fewer aggregates and agglomerates in the PAA based silicon slurries, while LiPAA based silicon slurries become orders of magnitude more aggregated and agglomerated at all shear rates. The reorganization of the PAA and LiPAA binder in the presence of dispersant leads to a more homogeneous slurry and a more heterogeneous slurry, respectively. This reorganization ripples through to the cast electrode architecture and is reflected in the electrochemical cycling of these electrodes.

Structure and dynamics of small polyimide oligomers with silicon as a function of aging.

The effect of UV curing and shearing on the structure and behavior of a polyimide (PI) binder as it disperses silicon particles in a battery electrode slurry was investigated. PI dispersant effectiveness increases with UV curing time, which controls the overall binder molecular weight. The shear force during electrode casting causes higher molecular weight PI to agglomerate, resulting in battery anodes with poorly dispersed Si particles that do not cycle well. It is hypothesized that when PI binder is added above a critical amount, it conformally coats the silicon particles and greatly impedes Li ion transport. There is an "interzonal region" for binder loading where it disperses silicon well and provides a coverage that facilitates Li transport through the anode material and into the silicon particles. These results have implications in ensuring reproducible electrode manufacturing and increasing cell performance by optimizing the PI structure and coordination with the silicon precursor.

Topochemical synthesis of alkali-metal hydroxide layers within double- and triple-layered perovskites.

The formation of alkali-metal hydroxide layers within lamellar perovskites has been accomplished by a two-step topochemical reaction strategy. Reductive intercalation of ALaNb2O7 with alkali metal (A = K, Rb) and RbCa2Nb3O10 with Rb leads to A2LaNb2O7 and Rb2Ca2Nb3O10, respectively. Oxidative intercalation with stoichiometric amounts of water vapor, produced by the decomposition of calcium oxalate monohydrate in a sealed ampule, allows the insertion hydroxide species. Compounds of the form (A2OH)LaNb2O7 (A = K, Rb) and (Rb2OH)Ca2Nb3O10 are accessible. X-ray diffraction data indicates a clear layer expansion of almost 3 Å on the insertion of hydroxide relative to that of the parent. Rietveld refinement of neutron diffraction data collected on deuterated samples of (Rb2OD)LaNb2O7 (P4/mmm space group, a = 3.9348(1) Å, c = 14.7950(7) Å) finds that both rubidium and oxygen species reside in cubic sites forming a CsCl-like interlayer structure between niobate perovskite blocks. Hydrogens, attached to the interlayer oxygens, are disordered over a 4-fold site in the x-y plane and have O-H bond distances (0.98 Å) consistent with known hydroxide species. This synthetic approach expands the library of available topochemical reactions, providing a facile method for the construction of alkali-metal hydroxide layers within receptive perovskite hosts.

Understanding the Solution Dynamics and Binding of a PVDF Binder with Silicon, Graphite, and NMC Materials and the Influence on Cycling Performance.

The impact of the binding, solution structure, and solution dynamics of poly(vinylidene fluoride) (PVDF) with silicon on its performance as compared to traditional graphite and Li1.05Ni0.33Mn0.33Co0.33O2 (NMC) electrode materials was explored. Through refractive index (RI) measurements, the concentration of the binder adsorbed on the surface of electrode materials during electrode processing was determined to be less than half of the potentially available material resulting in excessive free binder in solution. Using ultrasmall-angle neutron scattering (USANS) and small-angle neutron scattering (SANS), it was found that PVDF forms a conformal coating over the entirety of the silicon particle. This is in direct contrast to graphite-PVDF and NMC-PVDF slurries, where PVDF only covers part of the graphite surface, and the PVDF chains make a network-like graphite-PVDF structure. Conversely, a thick layer of PVDF covers NMC particles, but the coating is porous, allowing for ion and electronic transport. The homogeneous coating of silicon breaks up percolation pathways, resulting in poor cycling performance of silicon materials as widely reported. These results indicate that the Si-PVDF interactions could be modified from a binder to a dispersant.

Evolution of microscopic heterogeneity and dynamics in choline chloride-based deep eutectic solvents.

Deep eutectic solvents (DESs) are an emerging class of non-aqueous solvents that are potentially scalable, easy to prepare and functionalize for many applications ranging from biomass processing to energy storage technologies. Predictive understanding of the fundamental correlations between local structure and macroscopic properties is needed to exploit the large design space and tunability of DESs for specific applications. Here, we employ a range of computational and experimental techniques that span length-scales from molecular to macroscopic and timescales from picoseconds to seconds to study the evolution of structure and dynamics in model DESs, namely Glyceline and Ethaline, starting from the parent compounds. We show that systematic addition of choline chloride leads to microscopic heterogeneities that alter the primary structural relaxation in glycerol and ethylene glycol and result in new dynamic modes that are strongly correlated to the macroscopic properties of the DES formed.

Probing clustering dynamics between silicon and PAA or LiPAA slurries under processing conditions.

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e. shape) of poly(acrylic acid) (PAA) and lithiated poly(acrylic acid) (LiPAA) based silicon slurries as a function of shear rate, and the resulting slurry homogeneity. These values were measured by small angle neutron scattering (SANS) and rheology coupled ultra-small angle neutron scattering (rheo-USANS) at conditions relevant to battery electrode casting. Different binder solution preparation methods, either a ball mill (BM) process or a planetary centrifugal mixing (PCM) process, dramatically modify the resulting polymer dynamics and organization around a silicon material. This is due to the different energy profiles of mixing where the more violent and higher energy PCM causes extensive breakdown and reformation of the binder, which is now likely in a branched conformation, while the lower energy BM results in simply lower molecular weight linear polymers. The break down and reorganization of the polymer structure affects silicon slurry homogeneity, which affects subsequent electrode architecture.

Electron Transfer in Microemulsion-Based Electrolytes.

The use of flowing electrochemical reactors, for example, in redox flow batteries and in various electrosynthesis processes, is increasing. This technology has the potential to be of central significance in the increased deployment of renewable electricity for carbon-neutral processes. A key element of optimizing efficiency of electrochemical reactors is the combination of high solution conductivity and reagent solubility. Here, we show a substantial rate of charge transfer for an electrochemical reaction occurring in a microemulsion containing electroactive material is loaded inside the nonpolar (toluene) subphase of the microemulsion. The measured rate constant translates to an exchange current density comparable to that in redox flow batteries. The rate could be controlled by the surfactant, which maintains partitioning of reactants and products by forming an interfacial region with ions in the aqueous phase in close proximity. The hypothesized mechanism is evocative of membrane-bound enzymatic reactions. Achieving sufficient rates of electrochemical reaction is the product of an effort designed to establish a reaction condition that meets the requirements of electrochemical reactors using microemulsions to realize a separation of conducting and reactive elements of the solution, opening a door to the broad use of microemulsions to effect controlled electrochemical reactions as steps in more complex processes.

Liquid Structure and Transport Properties of the Deep Eutectic Solvent Ethaline.

A range of techniques including physical property measurements, neutron scattering experiments, ab initio molecular dynamics, and classical molecular dynamics simulations are used to probe the structural, thermodynamic, and transport properties of a deep eutectic solvent comprised of a 1:2 molar ratio of choline chloride and ethylene glycol. This mixture, known as Ethaline, has many desirable properties for use in a range of applications, and therefore, understanding its liquid structure and transport properties is of interest. Simulation results are able to capture experimental densities, diffusivities, viscosities, and structure factors extremely well. The solvation environment is dynamic and dominated by different hydrogen bonding interactions. Dynamic heterogeneities resulting from hydrogen bonding interactions are quantified. Rotational dynamics of molecular dipole moments of choline and ethylene glycol are computed and found to exhibit a fast and slow mode.

Hierarchical assembly in PLA-PEO-PLA hydrogels with crystalline domains and effect of block stereochemistry.

Understanding the development of microstructure (e.g., structures with length scales roughly 0.5-500 µm) in hydrogels is crucial for their use in several biomedical applications. We utilize ultra-small-angle neutron scattering (USANS) and confocal microscopy to explore microstructure of poly(lactide)-poly(ethylene oxide)-poly(lactide) (PLA-PEO-PLA) triblock copolymer hydrogels with varying l/d-lactide ratio. We have previously found that these polymers self-assemble on the nanoscale into micelles. Here, we observe large-scale structures with diverse morphologies, including highly porous self-similar networks with characteristic sizes spanning approximately 120 nm-200 µm. These structural features give rise to power-law scattering indicative of fractal structures in USANS. Mass fractal and surface fractal structures are found for gels with l/d ratios of 80/20 and 50/50, respectively. Confocal microscopy shows microscale water-filled channels and pores that are more clearly evident in gels with a higher fraction of l-lactide in the PLA block as compared to the 50/50 hydrogels. Tuning block stereochemistry may provide a means of controlling the self-assembly and structural evolution at both the nanoscale and microscale, impacting application of these materials in tissue engineering and drug delivery.

AGES: Automated Gas Environment System for in situ neutron powder diffraction.

High fluxes available at modern neutron and synchrotron sources have opened up a wide variety of in situ and operando studies of real processes using scattering techniques. This has allowed the user community to follow chemistry in the beam, which often requires high temperatures, gas flow, etc. In this paper, we describe an integrated gas handling system for the general-purpose powder diffraction beamline Powgen at the Spallation Neutron Source. The Automated Gas Environment System (AGES) allows control of both gas flow and temperature (room temperature to 850 °C), while measuring the partial pressure of oxygen and following the effluent gas by mass spectrometry, concurrent with neutron powder diffraction, in order to follow the structural evolution of materials under these conditions. The versatility of AGES is illustrated by two examples of experiments conducted with the system. In solid oxide fuel cell electrode materials, oxygen transport pathways in double perovskites PrBaCo2O5+δ and NdBaCo2O5+δ were elucidated by neutron diffraction measurements under atmosphere with oxygen partial pressures (pO2) of 10-1 to 10-4 (achieved using mixtures of nitrogen and oxygen) and temperatures from 575 to 850 °C. In another example, the potential oxygen storage material La1-xSrxFeO3 was measured under alternating flows of 15% CH4 in N2 and air (20% O2 in N2) at temperatures from 135 to 835 °C. From the oxygen stoichiometry, the optimal composition for oxygen storage was determined.

Shear Thickening Electrolyte Built from Sterically Stabilized Colloidal Particles.

We present a method to prepare shear thickening electrolytes consisting of silica nanoparticles in conventional liquid electrolytes with limited flocculation. These electrolytes rapidly and reversibly stiffen to solidlike behaviors in the presence of external shear or high impact, which is promising for improved lithium ion battery safety, especially in electric vehicles. However, in initial chemistries the silica nanoparticles aggregate and/or sediment in solution over time. Here, we demonstrate steric stabilization of silica colloids in conventional liquid electrolyte via surface-tethered PMMA brushes, synthesized via surface-initiated atom transfer radical polymerization. The PMMA increases the magnitude of the shear thickening response, compared to the uncoated particles, from 0.311 to 2.25 Pa s. Ultrasmall-angle neutron scattering revealed a reduction in aggregation of PMMA-coated silica nanoparticles compared to bare silica nanoparticles in solution under shear and at rest, suggesting good stabilization. Conductivity tests of shear thickening electrolytes (30 wt % solids in electrolyte) at rest were performed with interdigitated electrodes positioned near the meniscus of electrolytes over the course of 24 h to track supernatant formation. Conductivity of electrolytes with bare silica increased from 10.1 to 11.6 mS cm-1 over 24 h due to flocculation. In contrast, conductivity of electrolytes with PMMA-coated silica remained stable at 6.1 mS cm-1 over the same time period, suggesting good colloid stability.

CF4 on carbon nanotubes: physisorption on grooves and external surfaces.

We present the combined results of a computer simulation and adsorption isotherm investigation of CF4 films on purified HiPco nanotubes. The experimental measurements found two substeps in the adsorption data. The specific surface area of the sample and the coverage dependence of the isosteric heat of adsorption of the films were determined from the measurements. The simulations, conducted for homogeneous bundles of close-ended tubes, also found two substeps in the first layer data: one corresponding to adsorption on the grooves and a second one, at higher pressures, corresponding to adsorption on the outside surface of the tubes. Our computer simulations are in very good agreement with the experimental data.

Isosteric heat of argon adsorbed on single-walled carbon nanotubes prepared by laser ablation.

We have measured 21 adsorption isotherms for argon on single-walled carbon nanotubes produced by laser ablation. We explored temperatures between 40 and 153 K to obtain the coverage dependence of the isosteric heat of adsorption for films in the first and second layers. Our data are compared to results obtained in computer simulation studies and to data obtained in previous experimental investigations of this system.

Adsorption of xenon on purified HiPco single walled carbon nanotubes.

We have measured adsorption of xenon on purified HiPco single-walled carbon nanotubes (SWNTs) for coverages in the first layer. We compare the results on this substrate to those our group obtained in earlier measurements on lower purity arc-discharge produced nanotubes. To obtain an estimate for the binding energy of Xe, we measured five low-coverage isotherms for temperatures between 220 and 260 K. We determined a value of 256 meV for the binding energy; this value is 9% lower than the value we found for arc discharge nanotubes and is 1.59 times the value found for this quantity on planar graphite. We have measured five full monolayer isotherms between 150 and 175 K. We have used these data to obtain the coverage dependence of the isosteric heat. The experimental values obtained are compared with previously published computer simulation results for this quantity.