Effect of enzymatic Maillard reaction conditions on physicochemical properties, nutrition, fatty acids composition and key aroma compounds of fragrant rapeseed oil.

BACKGROUND: A new enzymatic hydrolysis-based process inspired by the Maillard reaction can produce strong flavored, high-value rapeseed oil that meets safety requirements. In the present study, the effect of reaction time (10-30 min) and temperature (130-160 °C) on the physicochemical properties, nutritional status, fatty acids composition and key aroma compounds of fragrant rapeseed oil (FRO) was investigated. RESULTS: An increasing reaction time and temperature substantially decreased the total tocopherol, polyphenol and sterol contents of FRO, but increased benzo[a]pyrene content, as well as the acid and peroxide values, which did not exceed the European Union legislation limit. Among the volatile components, 2,5-dimethyl was the main substance contributing to the barbecue flavor of FRO. The 150 °C for 30 min reaction conditions produced a FRO with a strong, fragrant flavor, with high total tocopherol (560.15 mg kg-1 ), polyphenol (6.82 mg kg-1 ) and sterol (790.65 mg kg-1 ) contents; acceptable acid (1.60 mg g-1 ) and peroxide values (4.78 mg g-1 ); and low benzo[a]pyrene (1.39 mg g-1 ) content. These were the optimal conditions for the enzymatic Maillard reaction, according to the principal component analysis. Furthermore, hierarchical cluster analysis showed that reaction temperature had a stronger effect on FRO than reaction time. CONCLUSION: The optimal enzymatic Maillard reaction conditions for the production of FRO are heating at 150 °C for 30 min. These findings provide new foundations for better understanding the composition and flavor profile of FRO, toward guiding its industrial production. © 2023 Society of Chemical Industry.

Changes in the physicochemical properties and antioxidant capacity of Sichuan hotpot oil.

This study aimed to develop nutritious and healthy Sichuan hotpot oil. Four blended oil formulas were formulated using MATLAB based on the fatty acid composition of four base constituents (beef tallow, mutton tallow, peanut oil, and palm oil). The sensory characteristics, physicochemical properties, nutritional composition, harmful substances, and antioxidant capacity of the oils were analyzed during the boiling process. A blend of 60% beef tallow + 10% mutton tallow + 10% peanut oil + 20% palm oil exhibited a low level of peroxide (0.03 g/100 g) and malondialdehyde (0.04 mg/kg), and high phytosterol content (1028.33 mg/kg), which was the suitable hotpot blending oil. Furthermore, the changes in the physicochemical properties during boring were low, with a high retention rate of phytosterol (94.85%), and the levels of 3,4-benzopyrene (1.12 µg/kg) and 3-monochloropropane-1,2-diol ester (0.67 mg/kg) were both lower than the recommended limits. This study will provide a theoretical basis for the advancement of the hotpot oil industry.

Comparison of Different Extraction Processes on the Physicochemical Properties, Nutritional Components and Antioxidant Ability of Xanthoceras sorbifolia Bunge Kernel Oil.

In this study, we investigated and compared the oil yield, physicochemical properties, fatty acid composition, nutrient content, and antioxidant ability of Xanthoceras sorbifolia Bunge (X. sorbifolia) kernel oils obtained by cold-pressing (CP), hexane extraction (HE), aqueous enzymatic extraction (AEE), and supercritical fluid extraction (SFE). The results indicated that X. sorbifolia oil contained a high percentage of monounsaturated fatty acids (49.31-50.38%), especially oleic acid (30.73-30.98%) and nervonic acid (2.73-3.09%) and that the extraction methods had little effect on the composition and content of fatty acids. X. sorbifolia oil is an excellent source of nervonic acid. Additionally, the HE method resulted in the highest oil yield (98.04%), oxidation stability index (9.20 h), tocopherol content (530.15 mg/kg) and sterol content (2104.07 mg/kg). The DPPH scavenging activity rates of the oil produced by SFE was the highest. Considering the health and nutritional value of oils, HE is a promising method for X. sorbifolia oil processing. According to multiple linear regression analysis, the antioxidant capacity of the oil was negatively correlated with sterol and stearic acid content and positively correlated with linoleic acid, arachidic acid and polyunsaturated fatty acid content. This information is important for improving the nutritional value and industrial production of X. sorbifolia.

Physicochemical properties of rice bran blended oil in deep frying by principal component analysis.

This study aimed to obtain a rice bran blended oil with good quality in deep frying. The thermal stability, nutrients and harmful substances of rice bran oil (RBO) and other four oils (palm oil, PO; cottonseed oil, CO; sunflower oil, SuO; soybean oil, SO) were analyzed. Besides, the blended oil formulas were established by the principal component analysis method, and their physicochemical properties, frying characteristic indicators, nutrients, and harmful substances were compared. The results provided that two suitable blended oil formulas (F1: 50% RBO + 40% PO + 10% CO; F2: 60% RBO + 35% PO + 5% CO) of good frying performance were attained by principal component analysis. The acid value (1.19 mg/g), peroxide value (0.09 meq/kg), residual oil rate (8.07%), 3-MCPD ester reduction content (2.33 mg/kg), benzopyrene concentration content (0.95 µg/kg) and vitamin E consumption rate (67.86%) in F2 were lower than that in F1. Moreover, the oryzanol retention rate (87.84%) of F2 was higher than that of F1. In summary, F2 was more conducive to human health and more suitable than F1 in deep-frying. This information had an important directive on the industrial production of rice bran blend oil. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05472-7.

Multifaceted analysis of the effects of roasting conditions on the flavor of fragrant Camellia oleifera Abel. seed oil.

Fragrant Camellia oleifera Abel. seed oil (FCSO), produced by a roasting process, is popular for its characteristic aroma. This study investigated the effects of various roasting temperatures (90℃, 120℃, 150℃, 180℃) and durations (20 min, 40 min, 60 min) on the flavor of FCSO by physicochemical properties, hazardous substances, sensory evaluation, and flavor analyses. The results showed that FCSO roasted at 120℃/20 min had a reasonable fatty acid composition with a lower acid value (0.16 mg/g), peroxide value (0.13 g/100 g), p-anisidine value (2.27), dibutyl phthalate content (0.04 mg/kg), and higher 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activity (224.51 µmol TE/kg) than other samples. A multivariate analysis of FCSO flavor revealed that the 120℃/20 min group had a higher grassy flavor score (5.3 score) from nonanoic acid and a lower off-flavor score (2.2 score) from 2-methylbutyric acid. The principal component analysis showed that 120℃/20 min could guarantee the best flavor and quality of FCSO. Therefore, this information can guide the preparation of FCSO.

Physicochemical properties and flavor substances analyses of refined beef tallow with dry fractionation treatment.

Dry fractionation represents a significant technique for separation of diverse fractions from beef tallow. The objective of this study was to undertake a systematic investigation of alterations in physicochemical properties, crystallization behavior, thermal properties, and flavor compounds that occur during the beef tallow dry fractionation process. The solid component yielded at 40, 30, and 15 °C were 44.88%, 33.72%, and 13.04% respectively, with an 8.36% liquid content at 15 °C, which was consistent with the characteristics of saturated fatty acids content. The ß - ß' transformation in the dry fractionation process was clearly revealed by X-ray diffraction. Differential scanning calorimetry curves exhibited alterations in exothermic and endothermic peak, as well as enthalpy. Electronic nose identified short-chain compounds, aldehydes, ketones, and nitrogen-containing substances as flavor compounds. Volatile compounds were quantified using HS-SPME-GC-MS. Overall, dry fractionation produces beef tallow fractionated compounds with diverse physicochemical properties and aromatic-active substances, thereby expanding its potential utilization.

Synthesis and Characterization of Emulsifiers Based on the Maillard Reaction and Its Application in Stabilized DHA Algal Oil Nanoemulsions.

The aim of this study was to optimize the formation of sodium caseinate (CS) and gum arabic (GA) complexes through the Maillard reaction and to evaluate their effectiveness in improving the emulsification properties and stability of docosahexaenoic acid (DHA) nanoemulsions. First, the best target polysaccharides were selected, and the best modification conditions were determined using orthogonal experiments. Secondly, the response surface experiments were used to optimize the preparation process of the emulsion. The stability, in vitro digestion characteristics, and rheological characteristics of the emulsion prepared by means of CS-GA were compared with the emulsion prepared using a whey protein isolate (WPI). After the orthogonal test, the optimal modification conditions were determined to be a reaction time of 96 h, a CS-GA mass ratio of 1:2, a reaction temperature of 60 °C, and a degree of grafting of 44.91%. Changes in the infrared (IR), Raman, ultraviolet (UV), and endogenous fluorescence spectra also indicated that the complex structure was modified. The response surface test identified the optimal preparation process as follows: an emulsifier concentration of 5 g/L, an oil-phase concentration of 5 g/L, and a homogenization frequency of five, and the emulsion showed good stability. Therefore, the use of a nanoemulsion as a nanoscale DHA algal oil delivery system is very promising for extending the shelf life and improving the stability of food.

Effects of different oleogelators on the structural properties and composition of iron walnut-oil oleogels.

In this study, we compared the quality of iron walnut oil (IWO) oleogels prepared with different oleogelators, including γ-oryzanol/ß-sitosterol (OZ-PS), γ-oryzanol/triglyceride (OZ-TC), monoglycerides (MGS), beeswax (BW), beeswax-monoglycerides (BW-MGS), and carnauba wax (CW). The physicochemical and component properties, rheological and textural parameters, macroscopic morphologies, and antioxidant capacities of the resulting oleogels were analyzed. In addition, their microscopic properties were analyzed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD) spectroscopy, and polarized light microscopy (PLM). The results showed that the gel structures produced by different oleogelators did not change the fatty acid composition of IWO. In addition, the IWO oleogel prepared with OZ-PS had a more stable network structure, excellent hardness at 4℃ (1116.51 g), better antioxidant capacity (766.50 µmol TE/kg) and higher total phenolic content (14.98 mg/kg) than any other experimental IWO oleogels. Moreover, comprehensive ranking by principal component analysis of numerous characteristics showed that the OZ-PS oleogel (2.533) ranked first among the six oleogels studied. Therefore, the IWO oleogel prepared with OZ-PS is a promising product, and our results provide guidance for the preparation of IWO oleogels, such as to increase their applications in the food industry.

Effects of different amino acid enzymatic preparations on the quality and flavor of fragrant rapeseed oil.

Enzymatically prepared aromatic oils commonly have high purity and aroma quality. However, amino acid type and content vary greatly according to the type of oil, which impacts overall aroma and quality. In this study, the effects of lysine (Lys), arginine (Arg), proline (Pro), and glutamic (Glu) acid on physicochemical indices, nutrients, hazardous substances, fatty acid composition, and flavor during fragrant rapeseed oil (FRO) enzymatic preparation were investigated using the Maillard reaction (MR). In the lysine-treated group, the unsaturated fatty acids (93.16 %), α-tocopherol (183.06 mg/kg), γ-tocopherol (404.37 mg/kg), and δ-tocopherol (12.69 mg/kg) contents were the highest, whereas the acid value (1.27 mg/g) and moisture (0.10 %) and benzo[a]pyrene (1.45 µg/kg) contents were the lowest. Sensory evaluation showed that lysine effectively enhanced FRO flavor by enhancing the nutty/toasted flavor (4.80 scores). Principle component analysis (PCA) showed that the nutty/toasted flavor correlated mainly with 2,6-dimethylpyrazine, 2,5-dimethyl-pyrazine, 2-methyl-pyrazine, and trimethylpyrazine, nutty/toasted flavor strength increased with pyrazine content, which were the highest in the lysine group (24.02 µg/g). This study provides a guide for FRO preparation by adding external MR prerequisites.

Assessment of the Physicochemical Properties of Fragrant Rapeseed Blended Hotpot Oil by Principal Component Analysis.

In this study, a nutritious, healthy Chongqing hotpot oil with excellent flavor was blended while considering nutrition, flavor, and health aspects. Four blended hotpot oils prepared from fragrant rapeseed, palm, sesame, and chicken oils were analyzed to determine their physicochemical properties, antioxidant capacities, levels of harmful substances, and nutritional compositions, and their sensory qualities were evaluated. Principal component analysis was performed to identify the best hotpot oil (10% chicken oil + 20% palm oil + 10% sesame oil + 60% fragrant rapeseed oil), which exhibited good antioxidant capacity (Oxidation Stability Index: 7.95 h; 2,2-diphenyl-1-picrylhydrazyl: 168.6 µmol/kg, 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate): 116.7 µmol/kg, and ferric-reducing/antioxidant power: 63.9 µmol/kg), a high sensory score (7.7/10), stable physicochemical properties (acid value: 0.27 mg/g and peroxide value: 0.01 g/100 g), and high tocopherol (54.22%), and phytosterol retention (98.52%) after boiling for 8 h. Although the 3,4-benzopyrene content of this hotpot oil exceeded the EU standard after boiling for 7 h, the increase in the amount of harmful substances was the lowest.

Optimization of Composite Decolorizer Efficacy Based on Decolorization Efficiency, Toxicity, and Nutritional Value of Rice Bran Oil.

This study compared the effect of five different adsorbents (activated clay, activated carbon, attapulgite clay, bentonite, diatomite) on the levels of nutrients, harmful substance retention, and decolorization in rice bran oil. Among the adsorbents tested, activated carbon displayed the highest decolorization efficiency (82.90%) and adsorption effect on 3,4-benzopyrene (BaP, 89.53%) and 3-monochloropropane-1,2-diol ester (41.55%), whereas activated clay had the highest oryzanol retention percentages (85.98%) and affordability. Activated carbon and activated clay were therefore selected as composite decolorizing agents. Based on single-factor and Box-Behnken response surface tests, the optimal conditions for decolorization efficiency (97.08%), oryzanol retention (89.62%), sterol retention (90.16%), vitamin E retention (79.91%), and benzo(a)pyrene adsorption percentages (95.98%) were determined to be achieved by using a 5% (w/w) composite decolorant (activated clay:activated carbon=5:1), at a temperature of 116℃, with an incubation time of 33 min. This study provides evidence to support the efficacy of compound decolorants, which may have practical use in large-scale industrial applications of edible oil decolorization during refinement.

High-oleic rapeseed oil quality indicators and endogenous antioxidant substances under different processing methods.

This study exposed high-oleic rapeseed oil (HORO) to different pretreatment (microwave or roasting) and processing methods to investigate (cold pressing, hexane extraction, subcritical butane extraction, and aqueous enzymatic extraction) the effects of processing technologies on HORO parameters associated with its physicochemical properties, endogenous antioxidant substances, and antioxidant capacity. The oil yield of various processing technologies was between 35.4% and 59.7%, and the fatty acid composition did not significantly differ. Hierarchical clustering and principal component analyses were used for evaluation. The results revealed that the microwave pretreatment-hexane extraction (M-HE) method resulted in significantly higher levels of tocopherols (688.4 mg/kg), polyphenols (1007.76 mg/kg), and phytosterols (1810.6 mg/kg) in HORO, implying strong free radical scavenging capacity (DPPH-oil: 79.63, DPPH-nonpolar: 71.42, DPPH-polar: 6.65, FRAP: 55.4, ABTS: 3043.7 µmol TE/kg). Hence, M-HE is a promising method for producing HORO with a higher stability and nutritional value.

Effects of roasting and deodorisation on 3-monochloropropane-1, 2-diol esters, 3, 4-benzopyrene and trans fatty acids in peanut oil.

Hazardous substances are readily produced during roasting and deodorisation in the preparation of peanut oil. The aim of this work was to investigate the variation of 3-monochloropropane-1, 2-diol ester (3-MCPDE), 3, 4-benzopyrene (BaP) and trans fatty acid (TFA) contents in the roasting and deodorisation segments of peanut oil production process. Roasting temperatures and durations significantly affected the contaminants contents in peanut oil; they increased significantly at a roasting temperature >210°C and time >60 min. In the deodorisation segment, the BaP and TFA contents were over the standard limits at a deodorisation temperature >210°C and time >140 min. Analysis showed that 3-MCPDE was significantly correlated with the formation of C18:2T (r = 0.979) and there was a linear relationship between BaP and C18:1T (Y = 0.509 C18:1T). This information will provide guidance for the precise and appropriate processing of peanut oil.

Characteristics and Antioxidant Activity of Walnut Oil Using Various Pretreatment and Processing Technologies.

This study was the first time the effects of pretreatment technology (microwave roasting, MR; oven roasting, OR; steaming roasting, SR) and processing technology (screw pressing, SP; aqueous enzymatic extraction, AEE; subcritical butane extraction, SBE) on the quality (physicochemical properties, phytochemical content, and antioxidant ability) of walnut oil were systematically compared. The results showed that the roasting pretreatment would reduce the lipid yield of walnut oil and SBE (59.53−61.19%) was the processing method with the highest yield. SR-AEE oil provided higher acid value (2.49 mg/g) and peroxide value (4.16 mmol/kg), while MR-SP oil had the highest content of polyunsaturated fatty acid (73.69%), total tocopherol (419.85 mg/kg) and total phenolic compounds (TPC, 13.12 mg/kg). The DPPH-polar and ABTS free radicals' scavenging abilities were accorded with SBE > AEE > SP. SBE is the recommended process for improving the extraction yield and antioxidant ability of walnut oil. Hierarchical cluster analysis showed that processing technology had a greater impact on walnut oil than pretreatment technology. In addition, multiple linear regression revealed C18:0, δ-tocopherol and TPC had positive effects on the antioxidant ability of walnut oil, while C18:1n-9, C18:3n-3 and γ-tocopherol were negatively correlated with antioxidant activity. Thus, this a promising implication for walnut oil production.

Evaluation of Chemical Properties of Commercial Extra Virgin Olive Oil in China.

The aim of the study was to investigate the chemical properties of the most popular commercial extra virgin olive oils (EVOOs) in China. A total of 14 EVOO samples were collected and evaluated, and significant differences were observed with respect to physicochemical properties, fatty acid composition, minor components, and the oxidation stability index (OSI). The results showed that the chemical properties of EVOOs were significantly affected by different producing areas. The oleic acid (C18:1) content (average value: 77.80%), squalene content (average value: 6052.28 mg/kg), and OSI (average value: 9.90 h) of the Spanish olive oil were higher than those of the other oils investigated, while the total phenolic content (average value: 308.34 mg/kg) was the lowest. Greek EVOOs had the lowest total sterol content (average value: 1023.48 mg/kg) and OSI (average value: 4.22 h). The C18:1 content (66.42%) and squalene content (3173.42 mg/kg) of the EVOO from China were lower than those of the other oils, while the palmitic acid (C16:0, 16.82%), linoleic acid (C18:2, 12.18%), total phenolic (553.17 mg/kg), and total sterol content (1904.77 mg/kg) were higher than those of the other olive oils. The EVOOs of the various countries could be distinguished by hierarchical cluster analysis (HCA). In addition, multiple linear regression (MLR) analyses between the OSI and chemical properties revealed that squalene (R = 0.729) and the unsaturation determined by the specific UV adsorption at 232 nm (K232, R = -0.300) were the main factors to affecting the EVOO oxidation stability.

Comparative Analysis of Rapeseed Oils Prepared by Three Different Methods.

Flavoured rapeseed oils prepared using traditional technologies (oils A and B) and a fragrant rapeseed oil obtained using an enzymatic Maillard reaction (oil C) were analysed to show that oil C featured basic indicators and a fatty acid composition similar to those of traditional oils while exhibiting a higher comprehensive sensory evaluation score. Volatile component, odour activity value (OAV), and relative odour activity value (ROAV) analyses revealed that oil C had an elevated content of pyrazines (20.83%) and aldehydes (38.15%), which resulted in stronger charred and caramel flavours. The aroma of oil C was directly impacted by 3-methylbutyraldehyde (OAV > 1) and was modified by 3-methylthiopropionaldehyde and nonanal (RAOV > 1 in both cases). Thus, the developed technology was found to be well suited for the production of novel and safe fragrant rapeseed oil.