ABSTRACT
The International Union of Pure and Applied Chemistry (IUPAC) has a long tradition of supporting the compilation of chemical data and their evaluation through direct projects, nomenclature and terminology work, and partnerships with international scientific bodies, government agencies and other organizations. The IUPAC Interdivisional Subcommittee on Critical Evaluation of Data (ISCED) has been established to provide guidance on issues related to the evaluation of chemical data. In this first report we define the general principles of the evaluation of scientific data and describe best practices and approaches to data evaluation in chemistry.
ABSTRACT
Solution radical homopolymerization of isobornyl acrylate (iBoA) under starved-feed higher temperature conditions unexpectedly leads to polymer product with low dispersity (<1.3) compared to the polymerization of butyl acrylate (BA) under identical conditions. Both backbiting and ß-scission reactions occur, as the poly(iBoA) product contains close to 100% terminal double bond (TDB) functionality. However, the addition of monomer to the midchain radicals formed by backbiting is sterically hindered, greatly reducing both short and long-chain branching. The poly(iBoA) macromonomer functions as an excellent addition-fragmentation agent, not only lowering dispersity but also providing a means to efficiently produce blocky acrylate copolymers through sequential monomer feeding in the starved-feed semibatch process.
Subject(s)
Acrylates , Polymers , Camphanes , PolymerizationABSTRACT
Pulsed-laser polymerization combined with polymer analysis by NMR and size-exclusion chromatography is used to study the radical copolymerization kinetics of isoprene (IP) with glycidyl methacrylate (GMA). The copolymer is characterized by a close-to-alternating microstructure, with the addition of IP leading to a significant decrease in the composition-averaged propagation rate coefficient. A rigorous fitting strategy is developed to fit a mixed penultimate model to the data, with the selectivity of the IP, but not the GMA, macroradical dependent on the penultimate unit.
Subject(s)
Butadienes/chemistry , Epoxy Compounds/chemistry , Hemiterpenes/chemistry , Methacrylates/chemistry , Pentanes/chemistry , Polymerization , Chromatography, Gel , Kinetics , Magnetic Resonance SpectroscopyABSTRACT
Three process variations are developed to synthesize dextran-bovine serum albumin (BSA) model conjugate through the Maillard reaction and a Schiff base-Amadori solid phase rearrangement mechanism at 90 °C. The influences of lyophilization pH and dextran:BSA molar ratio on the reaction are investigated, with the highest yields achieved by absorbing heat evenly and continuously removing the water by-product under vacuum. Lyophilizing at pH 7.8 provides higher yields than materials lyophilized at pH 5.9, a result attributed to higher reactivity of deprotonated amine at pH 7.8. The purified dextran-BSA conjugate solution is heated to above the BSA denaturation temperature (80 °C) at pH 5.2 to form nanogels with a hydrodynamic diameter of 195-400 nm, with the size dependent on the conjugate composition estimated by bicinchoninic acid protein and glycoprotein carbohydrate assays.
Subject(s)
Dextrans , Serum Albumin, Bovine , Dextrans/chemistry , Kinetics , Maillard Reaction , Nanogels , Serum Albumin, Bovine/chemistryABSTRACT
The synthetic polymer industry is transitioning from the use of organic solvents to aqueous media in order to reduce environmental impact. However, with radical polymerization kinetics affected by hydrogen-bonding solvents, there is limited information regarding the use of water as a solvent for sparingly soluble monomers. Thus, in this paper, the radical polymerization of methyl acrylate (MA) and N-tert-butylacrylamide (t-BuAAm) is studied in water and ethanol (EtOH), as the copolymer product is of commercial interest. A series of semi-batch reactions are conducted under a range of operating conditions (i.e., reaction temperature, solvent-to-monomer ratio, and comonomer composition) to demonstrate that the copolymer can be successfully synthesized without significant drifts in product molar masses or composition. The experiments provide additional data to probe the influence of the solvent on the polymerization rate and copolymer properties, as the low monomer concentration maintained under starved-feed operation leads to a solvent-to-monomer ratio different from that in a batch system. A model that captures the influence of backbiting and solvent effects on rate, previously developed and tested against batch polymerizations, also provides an excellent description of semi-batch operation, validating the set of mechanisms and kinetic coefficients developed to represent the system.
ABSTRACT
The cationic degradable polymer poly(lactic acid) choline iodide ester methacrylate, poly(PLA4ChMA), can be used to flocculate particles and dewater sediments from tailings ponds and wastewater. A suitable bioaccessibility method is required to characterize the interactions of this novel flocculant in the human gastrointestinal system. To this end, a physiologically based extraction test (PBET) was modified to evaluate the bioaccessibility of flocculants. Bioaccessibility (bioaccessible fraction) is a measure of the solubility of a contaminant in gastrointestinal fluids and that may be available for systemic absorption. The flocculants poly(PLA4ChMA), SNF C3276, and FLOPAM A3338 were tested at a solid-to-liquid ratio of 1:200 in the absence and presence of kaolin clay, which is used as a model sediment compound. Bioaccessible fractions were characterized by proton nuclear magnetic resonance spectroscopy and estimated by gravimetry. The bioaccessibility of poly(PLA4ChMA) in gastric and intestinal PBET solutions decreases from 78% to 100%, respectively, in the absence of kaolin to approximately 0% with kaolin, indicating that poly(PLA4ChMA) remains adsorbed onto the clay surface throughout the PBET, a result confirmed by thermogravimetric analysis. The bioaccessibility of cationic SNF C3276 and anionic FLOPAM A3338 in gastric solution is approximately 76% and 26%, respectively, and is not affected by the presence of kaolin. However, in intestinal solutions, the bioaccessibility of SNF C3276 and FLOPAM A3338 (60-85% in the absence of kaolin) changes to 0% and 100%, respectively, in the presence of kaolin. These results, interpreted in terms of solution pH and surface charge, demonstrate that interactions with kaolin influence the solubility of flocculants and must be considered in the evaluation of bioaccessibility. In future works, such bioaccessibility methods can be applied to assess the human-health safety of using flocculants in wastewater treatments.
Subject(s)
Wastewater , Water Purification , Humans , Kaolin , Clay , PolyestersABSTRACT
The propagation kinetics and copolymerization behavior of the biorenewable monomer γ-methyl-α-methylene-γ-butyrolactone (MeMBL) are studied using the pulsed laser polymerization (PLP)/size exclusion chromatography (SEC) technique. The propagation rate coefficient for MeMBL is 15% higher than that of its structural analogue, methyl methacrylate (MMA), with a similar activation energy of 21.8 kJ·mol(-1). When compared to MMA, MeMBL is preferentially incorporated into copolymers when reacted with styrene (ST), MMA, and n-butyl acrylate (BA); the monomer reactivity ratios fit from bulk MeMBL/ST, MeMBL/MMA, and MeMBL/BA copolymerizations are r(MeMBL) = 0.80 ± 0.04 and r(ST) = 0.34 ± 0.04, r(MeMBL) = 3.0 ± 0.3 and r(MMA) = 0.33 ± 0.01, and r(MeMBL) = 7.0 ± 2.0 and r(BA) = 0.16 ± 0.03, respectively. In all cases, no significant variation with temperature was found between 50 and 90 °C. The implicit penultimate unit effect (IPUE) model was found to adequately fit the composition-averaged copolymerization propagation rate coefficient, k(p,cop), for the three systems.
Subject(s)
4-Butyrolactone/analogs & derivatives , Green Chemistry Technology/methods , Methylmethacrylate/chemistry , Polymers/chemical synthesis , Styrene/chemistry , 4-Butyrolactone/chemical synthesis , Acrylates/chemistry , Chromatography, Gel , Free Radicals , Kinetics , Lasers , Models, Chemical , Polymerization , Temperature , Thermodynamics , ViscosityABSTRACT
Propagation rate coefficients (k(p) ) for 2-hydroxyethyl acrylate (HEA) have been determined by pulsed-laser polymerization (PLP) combined with size-exclusion chromatography (SEC) between 20 and 60 °C using pulse repetition rates of 50 and 100 Hz. The success of PLP-SEC under these conditions suggests that HEA is not subjected to the intramolecular chain transfer to polymer (backbiting) reactions dominant for other acrylates; (13) C NMR analysis shows that the quaternary carbon observed in PLP-generated poly(butyl acrylate) (pBA) samples is not observed in pHEA. These results are related to H-bonding in the system, as it is shown that the introduction of H-bonding by addition of n-butanol to BA suppresses backbiting, and the disruption of H-bonding by addition of dimethylformamide to HEA leads to an increased level of backbiting.
Subject(s)
Acrylates/chemistry , Polymers/chemistry , Hydrogen Bonding , Molecular Structure , Polymerization , Polymers/chemical synthesisABSTRACT
The use of copper tubing as both the reactor and as a catalyst source is demonstrated for continuous controlled radical polymerization of methyl acrylate at ambient temperature and at low solvent content of 30%. The high surface area provided by the copper walls mediates the reaction via the single electron transfer-living radical polymerization (SET-LRP) mechanism. The polymerizations proceeded quickly, reaching 67% conversion at a residence time of 16 min. Ligand concentration could also be reduced without a sharp drop in polymerization rate, demonstrating the potential for decreased raw material and post-process purification costs. Chain extension experiments conducted using synthesized polymer showed high livingness. The combination of living polymer produced at high polymerization rates at ambient temperature and low volatile organic solvent content demonstrate the potential of a copper reactor for scale up of SET-LRP.
Subject(s)
Acrylates/chemistry , Copper/chemistry , Catalysis , Free Radicals/chemistry , Polymerization , TemperatureABSTRACT
Poly(lactic acid) choline iodide ester methacrylate, poly(PLA4ChMA), is a cationic degradable polymer that can flocculate particles and dewater oil sands from tailings ponds. This novel material has yet to be characterized in terms of environmental and human health. If ingested, this substance may become bioaccessible. The bioaccessibility (bioaccessible fraction) of an ingested contaminant is a measure of the portion of an ingested dose that solubilizes and may be available for systemic absorption. In the present study, the partially degraded flocculant and its degradation products, modelled using lactic acid and choline chloride, were subjected to a modified physiologically based extraction test (PBET). Bioaccessible fractions were estimated by proton nuclear magnetic resonance (1H-NMR) spectroscopy and by high-performance liquid chromatography (HPLC). The measured bioaccessibility of lactic acid in gastric solution containing choline chloride is â¼100% but slightly dropped to 94% in intestinal solution at a solid-to-liquid ratio of 1:200. The partially degraded poly(PLA4ChMA) did not degrade further during the PBET and is not solubilized (i.e., 0% bioaccessibility) in the gastric phase but is fully solubilized (i.e., 100% bioaccessibility) in the intestinal phase. At the end of PBET intestinal digestion, the molar ratio of lactic acid to choline chloride in the presence of degraded poly(PLA4ChMA) was 2, approximately the same as in the initial solution. Thus, lactic acid and choline chloride are solubilized to the same extents in both gastric and intestinal solutions. Results suggest that HPLC can be used to directly estimate the bioaccessibility of lactic acid, whereas 1H - NMR may be used to indirectly quantify the bioaccessibility of both lactic acid and choline chloride by determining their molar ratio in PBET extracts. In future works, these findings may be applied to the estimation of risks from exposure to poly(PLA4ChMA) as well as to the remediation of contaminants flocculated by poly(PLA4ChMA) in tailings ponds and in other wastewaters.
ABSTRACT
A penultimate model of acrylate polymerization has been proposed to account for reduced reactivity of radicals formed by monomer addition to midchain radicals. New expressions derived for polymerization rate, number-average degree of polymerization and branching level are used for a comparative analysis of the penultimate and terminal models. The penultimate model has been also implemented into the simulation program PREDICI to conduct a comparative analysis of time dependencies of conversion, cumulative number-degree of polymerization and cumulative branching levels calculated for the different models. The calculations show that, depending on radical reactivity ratio s(i) and monomer concentrations, the predictions from the penultimate model significantly deviate from those of the terminal model.
ABSTRACT
n-Butyl acrylate (BA) starved-feed solution semibatch experiments with varying final polymer content and monomer feed times were carried out at 138 °C. A full mechanistic model of the system implemented in Predici includes intermolecular chain transfer to polymer and macromonomer propagation as well as backbiting, chain scission, and midchain radical propagation and termination. The importance of macromonomer propagation under these conditions of industrial interest is illustrated by experiment and simulation, with the macromonomer reaction responsible for the significant increase in polymer weight-average molecular weight ($\overline M _{\rm w}$) with time. Rate coefficients for macromonomer propagation (k(mac) ) and ß-scission (k(ß) ) of k(mac) /k(p) = 0.55 and k(ß) = 12 s(-1) (with k(p) the rate coefficient for BA chain-end propagation) provide a good representation of experimental $\overline M _{\rm w}$ and macromonomer end group data at 138 °C.
ABSTRACT
2-Hydroxyethyl methacrylate (HEMA) is an important component of many acrylic resins used in coatings formulations, as the functionality ensures that the chains participate in the cross-linking reactions required to form the final product. Hence, the knowledge of their radical copolymerization kinetic coefficients is vital for both process and recipe improvements. The pulsed laser polymerization (PLP) technique is paired with size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) to provide kinetic coefficients for the copolymerization of HEMA with butyl methacrylate (BMA) in various solvents. The choice of solvent has a significant impact on both copolymer composition and on the composition-averaged propagation rate coefficient (kp,cop). Compared to the bulk system, both n-butanol and dimethylformamide reduce the relative reactivity of HEMA during copolymerization, while xylene as a solvent enhances HEMA reactivity. The magnitude of the solvent effect varies with monomer concentration, as shown by a systematic study of monomer/solvent mixtures containing 50 vol%, 20 vol%, and 10 vol% monomer. The observed behavior is related to the influence of hydrogen bonding on monomer reactivity, with the experimental results fit using the terminal model of radical copolymerization to provide estimates of reactivity ratios and kp,HEMA.
ABSTRACT
The radical copolymerization of butyl acrylate (BA) and 2-hydroxyethyl acrylate (HEA) was investigated under batch and semi-batch operations, with a focus on the influence of hydrogen-bonding on acrylate backbiting. The effect of hydrogen bonding on HEA to BA relative incorporation rates during copolymerization, previously seen in low-conversion kinetic studies, was also observed under high-conversion semi-batch conditions. However, overall reaction rates (as indicated by free monomer concentrations), polymer molar masses, and branching levels did not vary as copolymer HEA content was increased from 0 to 40 wt % in the semi-batch system. In contrast, introduction of a H-bonding solvent, n-pentanol, led to an observable decrease in branching levels, and branching levels were also reduced in batch (co)polymerizations with HEA. These differences can be attributed to the low levels of unreacted HEA in the starved-feed semi-batch system.
ABSTRACT
We synthesized hydrolytically degradable cationic polymers by micellar radical polymerization of a short-chain polyester macromonomer, polycaprolactone choline iodide ester methacrylate (PCL2ChMA) with two polyester units, and used them to flocculate oil sands mature fine tailings (MFT). We evaluated the flocculation performance of the homopolymer and copolymers with 30 mol % acrylamide (AM) by measuring initial settling rate (ISR), supernatant turbidity, and capillary suction time (CST) of the sediments. Flocculants made with trimethylaminoethyl methacrylate chloride (TMAEMC), the monomer corresponding to PCLnChMA with n = 0, have improved performance over poly(PCL2ChMA) at equivalent loadings due to their higher charge density per gram of polymer. However, MFT sediments flocculated using the PCL2ChMA-based polymers are easier to dewater (up to an 85% reduction in CST) after accelerated hydrolytic degradation of the polyester side chains. This study demonstrates the potential of designing cationic polymers that effectively flocculate oil sands tailings ponds, and also further dewater the resulting solids through polymer degradation.
ABSTRACT
A new alkoxyamine based on a highly thermally stable nitroxide is used for the controlled polymerization of styrene and butyl acrylate at temperatures up to 200 °C. High monomer conversions are reached in a few minutes with a linear increase in polymer chain-length with conversion, a final dispersity (D) of â¼1.2, and successful chain-extension of the resulting material. The alkoxyamine concentration was altered to target various chain lengths, with autopolymerization dictating the polymerization rate of styrene regardless of alkoxyamine concentration. Controlled polymerization of methacrylate monomers and acrylic acid was successful with the addition of styrene. The new material opens the possibility to increase the range of specialty products made for applications in coatings, inks, overprint varnishes, and adhesives.
ABSTRACT
The radical copolymerization kinetics of methyl methacrylate (MMA) and poly-ϵ-caprolactone macromonomer functionalized with a vinyl end group (HEMA-CL(n)) is studied using a pulsed-laser technique. The reactivity ratios for this system are near unity, while a linear relationship between k(p,cop), the copolymer-averaged propagation rate coefficient, and the composition of macromonomer in the feed (0-80 wt% range) is determined. At 50 wt% macromonomer in the feed, a 1.67 ± 0.02 and 1.64 ± 0.06 increase in k(p,cop)/k(p,MMA) is determined for HEMA-CL3 and HEMA-CL2, respectively. These macromonomers are adopted to synthesize nanoparticles (NPs) in the range of 100-150 nm through batch emulsion free radical polymerization (BEP) to produce partially degradable drug delivery carriers. The produced NPs are tested in 4T1 cell line and show excellent characteristics as carriers: they do not affect cell proliferation, and a relevant number of NPs, thousands per cell, are internalized.
Subject(s)
Methacrylates/chemistry , Methylmethacrylate/chemistry , Nanoparticles/chemistry , Polyesters/chemistry , Animals , Cell Line , Cell Proliferation/drug effects , Drug Carriers , Humans , Kinetics , Methacrylates/administration & dosage , Methylmethacrylate/administration & dosage , Mice , Nanoparticles/administration & dosage , Polymerization , Polymers/administration & dosage , Polymers/chemistryABSTRACT
The critical chain length (jcrit) in dispersion polymerization is systematically investigated utilizing low molecular weight poly(methyl methacrylate) oligomers synthesized by catalytic chain transfer polymerization. The solubility of these oligomers in methanol/water media of different compositions and at different temperatures has been visually determined. The results show that the solubility of the oligomers increases with increasing methanol fraction and increasing temperature. The constructed solubility map allows for an estimate of jcrit as a function of these important polymerization parameters. Furthermore, it is found that the value of jcrit changes with the concentration of the oligomers in the methanol/water medium, an important consideration for understanding the nucleation stage of a dispersion polymerization. The obtained results have been successfully correlated to earlier data reported on the dispersion polymerization of methyl methacrylate.
ABSTRACT
The free-radical copolymerization propagation kinetics of vinyl acetate (VAc) and methyl methacrylate (MMA) at 50 degrees C were investigated through an experimental study combined with a computational analysis based on quantum chemistry. Copolymer composition data, obtained using pulsed laser polymerization followed by size exclusion chromatography (PLP-SEC) and proton nuclear magnetic resonance (NMR), were well represented by the terminal model using monomer reactivity ratios obtained with the computational approach (r(VAc) = 0.001 and r(MMA) = 27.9). Concerning the composition-averaged copolymerization propagation rate coefficient k(p,cop), the differences between the terminal model and the implicit penultimate unit effect (IPUE) model (s(MMA) = 0.544 and s(VAc) = 0.173) are small for VAc/MMA, with the terminal model sufficient to describe the experimental k(p,cop) data measured by PLP-SEC. Monomer and radical charge distributions determined computationally are used to explain the reactivity exhibited by the VAc/MMA system.
ABSTRACT
UNLABELLED: Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. ELECTRONIC SUPPLEMENTARY MATERIAL: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.