Design and analysis of a compact micro-ring resonator signal emitter to reduce the uniformity-induced phase distortion and crosstalk in orbital angular momentum (OAM) division multiplexing.

To improve the transmission capacity of an optical system, different multiplexing schemes have been proposed, such as optical time division multiplexing (OTDM), wavelength division multiplexing (WDM), polarization division multiplexing (PolDM), spatial division multiplexing (SDM), etc. One kind of SDM technique to boost the capacity is through modifying the spatial phase structure of an optical beam, which is known as the orbital angular momentum (OAM) division multiplexing. Moreover, the OAM signal emitter can be produced by using mature and high-yield silicon photonic (SiPh) technology, without the need of using bulky optical components or expensive spatial light modulator (SLM). The SiPh-based micro-ring resonator is one of the promising OAM signal emitter candidates, since it is simple, compact and easy to fabricate. However, the device performance is highly subjected to the structural design, and the uniformity-induced phase distortion will significantly degrade the purities of OAM beams; hence, introducing severe OAM signal crosstalk during the OAM division multiplexing. In this work, a compact SiPh-based micro-ring resonator type OAM signal emitter with detailed design parameters is presented and the output signal uniformity issue is comprehensively investigated. Two kinds of the structural optimization are performed by adjusting the angular grating width as well as the grating height. The results indicate that a significant improvement in output OAM beam uniformity can be achieved, with the attenuation factor being improved over 88% at the price of acceptable 4 ∼ 5% coupling efficiency reduction. The variations of the transmission and the uniformity induced by the fabrication error are also analyzed.

Bi-Directional Free-Space Visible Light Communication Supporting Multiple Moveable Clients Using Light Diffusing Optical Fiber.

In this work, we put forward and demonstrate a bi-direction free-space visible light communication (VLC) system supporting multiple moveable receivers (Rxs) using a light-diffusing optical fiber (LDOF). The downlink (DL) signal is launched from a head-end or central office (CO) far away to the LDOF at the client side via a free-space transmission. When the DL signal is launched to the LDOF, which acts as an optical antenna to re-transmit the DL signal to different moveable Rxs. The uplink (UL) signal is sent via the LDOF towards the CO. In a proof-of-concept demonstration, the LDOF is 100 cm long, and the free space VLC transmission between the CO and the LDOF is 100 cm. 210 Mbit/s DL and 850 Mbit/s UL transmissions meet the pre-forward-error-correction bit error rate (pre-FEC BER = 3.8 × 10-3) threshold.

Flexible Data Rate Allocation Using Non-Orthogonal Multiple Access (NOMA) in a Mode Division Multiplexing (MDM) Optical Power Splitter for System-on-Chip Networks.

We put forward and demonstrate a silicon photonics (SiPh)-based mode division multiplexed (MDM) optical power splitter that supports transverse-electric (TE) single-mode, dual-mode, and triple-mode (i.e., TE0, TE1, and TE2). An optical power splitter is needed for optical signal distribution and routing in optical interconnects. However, a traditional optical splitter only divides the power of the input optical signal. This means the same data information is received at all the output ports of the optical splitter. The powers at different output ports may change depending on the splitting ratio of the optical splitter. The main contributions of our proposed optical splitter are: (i) Different data information is received at different output ports of the optical splitter via the utilization of NOMA. By adjusting the power ratios of different channels in the digital domain (i.e., via software control) at the Tx, different channel data information can be received at different output ports of the splitter. It can increase the flexibility of optical signal distribution and routing. (ii) Besides, the proposed optical splitter can support the fundamental TE0 mode and the higher modes TE1, TE2, etc. Supporting mode-division multiplexing and multi-mode operation are important for future optical interconnects since the number of port counts is limited by the chip size. This can significantly increase the capacity besides wavelength division multiplexing (WDM) and spatial division multiplexing (SDM). The integrated SiPh MDM optical power splitter consists of a mode up-conversion section implemented by asymmetric directional couplers (ADCs) and a Y-branch structure for MDM power distribution. Here, we also propose and discuss the use of the Genetic algorithm (GA) for the MDM optical power splitter parameter optimization. Finally, to provide adjustable data rates at different output ports after the MDM optical power splitter, non-orthogonal multiple access-orthogonal frequency division multiplexing (NOMA-OFDM) is also employed. Experimental results validate that, in three modes (TE0, TE1, and TE2), user-1 and user-2 achieve data rates of (user-1: greater than 22 Gbit/s; user-2: greater than 12 Gbit/s) and (user-1: greater than 12 Gbit/s; user-2: 24 Gbit/s), respectively, at power-ratio (PR) = 2.0 or 3.0. Each channel meets the hard-decision forward-error-correction (HD-FEC, i.e., BER = 3.8 × 10-3) threshold. The proposed method allows flexible data rate allocation for multiple users for optical interconnects and system-on-chip networks.

Wideband and Channel Switchable Mode Division Multiplexing (MDM) Optical Power Divider Supporting 7.682 Tbit/s for On-Chip Optical Interconnects.

Silicon photonics (SiPh) are considered a promising technology for increasing interconnect speed and capacity while decreasing power consumption. Mode division multiplexing (MDM) enables signals to be transmitted in different orthogonal modes in a single waveguide core. Wideband MDM components simultaneously supporting wavelength division multiplexing (WDM) and orthogonal frequency-division multiplexing (OFDM) can significantly increase the transmission capacity for optical interconnects. In this work, we propose, fabricate and demonstrate a wideband and channel switchable MDM optical power divider on an SOI platform, supporting single, dual and triple modes. The switchable MDM power divider consists of two parts. The first part is a cascaded Mach-Zehnder interferometer (MZI) for switching the data from their original TE0, TE1 and TE2 modes to different modes among themselves. After the target modes are identified, mode up-conversion and Y-branch are utilized in the second part for the MDM power division. Here, 48 WDM wavelength channels carrying OFDM data are successfully switched and power divided. An aggregated capacity of 7.682 Tbit/s is achieved, satisfying the pre-forward error correction (pre-FEC) threshold (bit-error-rate, BER = 3.8 × 10-3). Although up to three MDM modes are presented in the proof-of-concept demonstration here, the proposed scheme can be scaled to higher order modes operation.

Design Consideration, Numerical and Experimental Analyses of Mode-Division-Multiplexed (MDM) Silicon Photonics Integrated Circuit with Sharp Bends.

Due to the popularity of different high bandwidth applications, it is becoming increasingly difficult to satisfy the huge data capacity requirements, since the traditional electrical interconnects suffer significantly from limited bandwidth and huge power consumption. Silicon photonics (SiPh) is one of the important technologies for increasing interconnect capacity and decreasing power consumption. Mode-division multiplexing (MDM) allows signals to be transmitted simultaneously, at different modes, in a single waveguide. Wavelength-division multiplexing (WDM), non-orthogonal multiple access (NOMA) and orthogonal-frequency-division multiplexing (OFDM) can also be utilized to further increase the optical interconnect capacity. In SiPh integrated circuits, waveguide bends are usually inevitable. However, for an MDM system with a multimode bus waveguide, the modal fields will become asymmetric when the waveguide bend is sharp. This will introduce inter-mode coupling and inter-mode crosstalk. One simple approach to achieve sharp bends in multimode bus waveguide is to use a Euler curve. Although it has been reported in the literature that sharp bends based on a Euler curve allow high performance and low inter-mode crosstalk multimode transmissions, we discover, by simulation and experiment, that the transmission performance between two Euler bends is length dependent, particularly when the bends are sharp. We investigate the length dependency of the straight multimode bus waveguide between two Euler bends. High transmission performance can be achieved by a proper design of the waveguide length, width, and bend radius. By using the optimized MDM bus waveguide length with sharp Euler bends, proof-of-concept NOMA-OFDM experimental transmissions, supporting two MDM modes and two NOMA users, are performed.

Using lighting design tool to simplify the visible light positioning plan and reduce the deep learning loading.

We put forward and transform the commercially available lighting design software into an indoor visible light positioning (VLP) design tool. The proposed scheme can work well with different deep learning methods for reducing the loading of training data set collection. The indoor VLP models under evaluation include second order regression, fully-connected neural-network (FC-NN), and convolutional neural-network (CNN). Experimental results show that the similar positioning accuracy can be obtained when the indoor VLP models are trained with experimentally acquired data set or trained with software obtained data set. Hence, the proposed method can reduce the training loading for the indoor VLP.

2.805 Gbit/s high-bandwidth phosphor white light visible light communication utilizing an InGaN/GaN semipolar blue micro-LED.

We propose and implement a high-bandwidth white-light visible light communication (VLC) system accomplishing data rate of 2.805 Gbit/s utilizing a semipolar blue micro-LED. The system uses an InGaN/GaN semipolar (20-21) blue micro-LED to excite yellow phosphor film for high-speed VLC. The packaged 30 µm 2 × 4 blue micro-LED array has an electrical-to-optical (EO) bandwidth of 1042.5 MHz and a peak wavelength of 447 nm. The EO bandwidth of the white-light VLC system is 849 MHz. Bit error rate (BER) of 2.709 × 10-3 meeting the pre-forward error correction (FEC) threshold is accomplished by employing a bit and power loaded orthogonal frequency division multiplexing (OFDM) signal. The proposed white-light VLC system employs simple and inexpensive yellow phosphor film for white-light conversion, complex color conversion material is not needed. Besides, no optical blue filter is employed in the white-light VLC system. The fabrication of the InGaN/GaN semipolar (20-21) blue micro-LED is discussed, and its characteristics are also evaluated.