Associations between occupational therapy students' academic performance and their study approaches and perceptions of the learning environment.

BACKGROUND: Relationships between students' academic performance and their employed study approaches have been studied extensively. However, research using study approaches and learning environment factors as concurrent predictors of academic performance is sparse. There is a need to disentangle the potentially interrelated influences of individual and contextual factors on students' academic performance. OBJECTIVE: This study aimed to increase the understanding of the associations between occupational therapy students' academic performance, and their approaches to studying, perceptions of the learning environment, and sociodemographic characteristics. METHOD: A cross-sectional study was designed, and 174 first-year students completed the Approaches and Study Skills Inventory for Students and the Course Experience Questionnaire, in addition to background information. Data on grades were collected from the data registries of each education institution, and associations were analyzed by multiple linear regression. RESULTS: None of the learning environment scales were associated with grades. Adjusting for all variables, better exam results were associated with being female (ß = 0.22, p < 0.01) and having higher scores on strategic approach (ß = 0.31, p < 0.001) and lower scores on surface approach (ß = -0.20, p < 0.01). CONCLUSION: The study suggests that students with a desire for obtaining good grades ought to use strategic study behaviors and avoid using surface approach behaviors. While it is important to ensure good quality of the learning environment for a variety of reasons, the learning environment did not contribute significantly to explain the students' academic performance.

Efficient, designable, and broad-bandwidth optical extinction via aspect-ratio-tailored silver nanodisks.

Subwavelength resonators, ranging from single atoms to metallic nanoparticles, typically exhibit a narrow-bandwidth response to optical excitations. We computationally design and experimentally synthesize tailored distributions of silver nanodisks to extinguish light over broad and varied frequency windows. We show that metallic nanodisks are 2-10x more efficient in absorbing and scattering light than common structures, and can approach fundamental limits to broadband scattering for subwavelength particles. We measure broadband extinction per volume that closely approaches theoretical predictions over three representative visible-range wavelength windows, confirming the high efficiency of nanodisks and demonstrating the collective power of computational design and experimental precision for developing new photonics technologies.

Design of diamond microcavities for single photon frequency down-conversion.

We propose monolithic diamond cavities that can be used to convert color-center Fock-state single photons from emission wavelengths to telecommunication bands. We present a detailed theoretical description of the conversion process, analyzing important practical concerns such as nonlinear phase shifts and frequency mismatch. Our analysis predicts sustainable power requirements (≲ 1 W) for a chipscale nonlinear device with high conversion efficiencies.

Robust topology optimization of three-dimensional photonic-crystal band-gap structures.

We perform full 3D topology optimization (in which "every voxel" of the unit cell is a degree of freedom) of photonic-crystal structures in order to find optimal omnidirectional band gaps for various symmetry groups, including fcc (including diamond), bcc, and simple-cubic lattices. Even without imposing the constraints of any fabrication process, the resulting optimal gaps are only slightly larger than previous hand designs, suggesting that current photonic crystals are nearly optimal in this respect. However, optimization can discover new structures, e.g. a new fcc structure with the same symmetry but slightly larger gap than the well known inverse opal, which may offer new degrees of freedom to future fabrication technologies. Furthermore, our band-gap optimization is an illustration of a computational approach to 3D dispersion engineering which is applicable to many other problems in optics, based on a novel semidefinite-program formulation for nonconvex eigenvalue optimization combined with other techniques such as a simple approach to impose symmetry constraints. We also demonstrate a technique for robust topology optimization, in which some uncertainty is included in each voxel and we optimize the worst-case gap, and we show that the resulting band gaps have increased robustness to systematic fabrication errors.

Fundamental limits to extinction by metallic nanoparticles.

We show that there are shape-independent upper bounds to the extinction cross section per unit volume of dilute, randomly arranged nanoparticles, given only material permittivity. Underlying the limits are restrictive sum rules that constrain the distribution of quasistatic eigenvalues. Surprisingly, optimally designed spheroids, with only a single quasistatic degree of freedom, reach the upper bounds for four permittivity values. Away from these permittivities, we demonstrate computationally optimized structures that surpass spheroids and approach the fundamental limits.

Exploration of in-fiber nanostructures from capillary instability.

A new class of multi-material fiber that incorporates micrometer-thickness concentric-cylindrical sheets of glass into polymer matrix has emerged. The ultimate lower limit of feature size and recent observation of interesting instability phenomenon in fiber system motivate us to examine fluid instabilities during the complicated thermal drawing fabrication processing. In this paper, from the perspective of a single instability mechanism, classical Plateau-Rayleigh instabilities in the form of radial fluctuation, we explore the stability of various microstructures (such as shells and filaments) in our composite fibers. The attained uniform structures are consistent with theoretical analysis. Furthermore, a viscous materials map is established from calculations and agrees well with various identified materials. These results not only shed insights into other forms of fluid instabilities, but also provide guidance to achieve more diverse nanostructures (such as filaments, wires, and particles) in the microstructured fibers.

Enzyme induction by oral testosterone.

Six normal male volunteers ingested a dose of 400 mg free testosterone daily as tablets over 21 days. By the end of treatment intravenous antipyrine half-life had decreased significantly from 8.0 +/- 2.7 to 5.7 +/- 2.6 hr. The subjects eliminated testosterone from serum more rapidly on the twenty-first day of testosterone ingestion than on the first day. Serum albumin, bilirubin, prothrombin, alanine-amino-transferase, and alkaline phosphatases were unchanged during the experiment. It is concluded that oral testosterone treatment induces the hepatic drug-metabolizing system including that of testosterone.

PIP: The effects of high doses of testosterone on liver function was studied in 6 healthy males. Intravenous antipyrine elimination was used as the primary parameter of liver function. The subjects received 400 mg testosterone orally for 20 days. The half-life of antipyrine decreased from a mean of 8 + or -2.7 to 5.7 + or -2.6 hours by the end of treatment. Excretion of testosterone was significantly (p greater than .0005) higher on Day 21 of the experiment than on Day 1. Treatment had no apparent effect on serum levels of albumin, bilirubin, prothrombin, alanine-amino-transferase, and alkaline phosphatases. It is concluded that orally administered testosterone induces its own enzymatic metabolism.

Population structure, parasitism, and survivorship of sexual and autodiploid parthenogenetic Campeloma limum.

Two theories for the maintenance of sexual reproduction, the Red Queen hypothesis and mutation accumulation, suggest that the dispersal rates of sexuals and asexuals may determine the elimination or persistence of asexuals. Under higher dispersal rates of asexuals, asexuals may temporarily escape virulent parasites and reduce the effects of deleterious mutations. In the present study, I examine the population structure, parasite loads, and juvenile survivorship of Campeloma limum sexuals and autodiploid parthenogens from the southeastern U.S. Atlantic coastal plain. Using mtDNA sequence variation, it is shown that parthenogenetic haplotypes with limited sequence divergence are geographically widespread throughout this region and there is no significant population differentiation over a broad geographical scale. Sexual C. limum populations show significant mtDNA differentiation among and within river drainages and there is significant isolation by distance. These patterns are consistent with a recent origin and range expansion of parthenogens. Prevalence of infection by digenetic trematodes is significantly higher in autodiploid parthenogens, and the variance of prevalence is also higher in autodiploid parthenogens. I argue that the latter pattern indicates that unparasitized parthenogens have temporarily escaped these virulent parasites, but recolonization of these populations by trematodes results in high infection levels (> 40%), possibly due to reduced variation in resistance genes. I also examined whether the survivorship of juvenile sexuals and parthenogens varied under different stress levels. Sexual juveniles had twofold higher survivorship in all environments. Compared to polyploid parthenogens, autodiploid parthenogens may be less buffered against the effects of deleterious recessive alleles. I propose that the combined effects of higher parasitism and reduced juvenile survivorship of these autodiploid parthenogens accounts for the spatial distribution of sexual and parthenogenetic C. limum in the Atlantic coastal plain. Parthenogens may persist by higher dispersal rates into marginal habitats where there is a temporary escape from digenetic trematodes and competition with sexuals.

Substituted salicylanilides as inhibitors of two-component regulatory systems in bacteria.

A new class of inhibitors of the two-component regulatory systems (TCS) of bacteria was discovered based on the salicylanilide screening hits, closantel (1) and tetrachlorosalicylanilide (9). A systematic SAR study versus a model TCS, KinA/Spo0F, demonstrated the importance of electron-attracting substituents in the salicyloyl ring and hydrophobic groups in the anilide moiety for optimal activity. In addition, derivatives 8 and 16, containing the 2, 3-dihydroxybenzanilide structural motif, were potent inhibitors of the autophosphorylation of the KinA kinase, with IC50s of 2.8 and 6. 3 µM, respectively. Compound 8 also inhibited the TCS mediating vancomycin resistance (VanS/VanR) in a genetically engineered Enterococcus faecalis cell line at concentrations subinhibitory for growth. Closantel (1), tetrachlorosalicylanilide (9), and several related derivatives (2, 7, 10, 11, 20) had antibacterial activity against the drug-resistant organisms, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium (VREF).

Brooding and the evolution of parthenogenesis: strategy models and evidence from aquatic invertebrates.

Developmental defects are expected to be common and severe in the early evolution of parthenogenesis, and they could help to explain the predominance of sexual forms of reproduction. It is difficult, however, to see how such defects might explain the ecological and phylogenetic correlates of sex. Here we suggest that internally fertilized animals that brood their young may be more susceptible to invasion by parthenogenetic mutants. The reason is that brooders could establish 'selective arenas' in which developmentally defective embryos are competitively displaced. Brooders could also selectively abort defective embryos, and replace them with minimal cost. Consistent with these ideas, we found a striking association between brooding and parthenogenesis in aquatic invertebrates. For example, in the Cnidaria and Mollusca, parthenogenesis is significantly more common in lineages that retain their young through the early stages of development. Hence brooding and ecological factors (such as escape from parasites) might combine to explain the initial spread, long-term persistence, and phylogenetic distribution of parthenogenetic reproduction.

The modified model cavity method for assessing antibacterial properties of dental restorative materials.

A new in vitro method for assessing the antibacterial properties of dental restorative materials is described with ratios of test material/culture medium volume aiming to simulate conditions around a restoration in vivo. Antibacterial activity is determined by the reduction in optical density of the test culture relative to controls. The method was used for assessment of the antibacterial activity of five dental materials of different composition against five oral bacteria. Release of zinc and fluoride from these materials was also measured and correlated with antibacterial activity. There was a general trend toward greater antibacterial activity with increased zinc release, while fluoride release had a significant effect on only one organism. While all the materials, when freshly mixed, were strongly toxic to three out of the five bacteria studied, much of this activity was lost after the materials had set.

Direct assay for testosterone in saliva: relationship with a direct serum free testosterone assay.

A direct non-extraction radioimmunoassay for salivary testosterone is described using a modified commercial kit procedure that is in use for total serum testosterone (T). Serum free testosterone was also measured by direct radioimmunoassay. A significant correlation (r = 0.83, p less than 0.01, n = 194) was obtained between salivary and serum free testosterone in matched serum and saliva samples over a wide range of concentrations. Within- and between-batch precision for the salivary testosterone method was 11% and 18%, respectively at a concentration of 170 pmol/l. Recovery of added T was 89% +/- 15% (mean +/- 2 SD) dilution of high samples showed parallelism. Salivary testosterone measured by direct radioimmunoassay offers a simple cheaper alternative to serum free testosterone measurement with the additional advantages of a stress-free non-invasive sampling procedure.

The effect of petal-size manipulation on pollen removal, seed set, and insect-visitor behavior in Campanula americana.

We investigated the effect of petal-size variation in tall bellflower, Campanula americana, on pollen removal rates, seed set, and pollinator behavior. Pollen removal, seed set, and the behavior of two bee visitors (Bombus and Halictus) were assessed in flowers that had 0%, 50%, or 100% of their petal lobes removed. Pollen removal rates did not differ significantly among the three treatment groups, probably due to the presence of an ineffective ("ugly") pollinator (Halictus), which quickly removed pollen from completely reduced flowers. Seed set was significantly positively correlated with petal size. Bumblebees discriminated against reduced flowers, thereby lowering pollen movement to reduced flowers. Halictid bees rarely contacted stigmatic surfaces and thus pollen delivery to reduced flowers was limited. The presence of an ugly pollinator probably obscured the effect of petal reduction on pollen receipt, thus masking the impact of attractive structures on male fitness. Given the positive relationship between seed set and petal size, we caution against ascribing expenditure on attractive structures exclusively to male function. In plants with many olules, expenditure on attractive structures may affect seed set.

Clinical Pharmacogenetics Implementation Consortium (CPIC) guidelines for ivacaftor therapy in the context of CFTR genotype.

Cystic fibrosis (CF) is a life-shortening disease arising as a consequence of mutations within the CFTR gene. Novel therapeutics for CF are emerging that target CF transmembrane conductance regulator protein (CFTR) defects resulting from specific CFTR variants. Ivacaftor is a drug that potentiates CFTR gating function and is specifically indicated for CF patients with a particular CFTR variant, G551D-CFTR (rs75527207). Here, we provide therapeutic recommendations for ivacaftor based on preemptive CFTR genotype results.

Clinical Pharmacogenetics Implementation Consortium (CPIC) guidelines for IFNL3 (IL28B) genotype and PEG interferon-α-based regimens.

Pegylated interferon-α (PEG-IFN-α or PEG-IFN 2a and 2b)- and ribavirin (RBV)-based regimens are the mainstay for treatment of hepatitis C virus (HCV) genotype 1. IFNL3 (IL28B) genotype is the strongest baseline predictor of response to PEG-IFN-α and RBV therapy in previously untreated patients and can be used by patients and clinicians as part of the shared decision-making process for initiating treatment for HCV infection. We provide information regarding the clinical use of PEG-IFN-α- and RBV-containing regimens based on IFNL3 genotype.

The clinical pharmacogenetics implementation consortium guideline for SLCO1B1 and simvastatin-induced myopathy: 2014 update.

Simvastatin is among the most commonly used prescription medications for cholesterol reduction. A single coding single-nucleotide polymorphism, rs4149056T>C, in SLCO1B1 increases systemic exposure to simvastatin and the risk of muscle toxicity. We summarize evidence from the literature supporting this association and provide therapeutic recommendations for simvastatin based on SLCO1B1 genotype. This article is an update to the 2012 Clinical Pharmacogenetics Implementation Consortium guideline for SLCO1B1 and simvastatin-induced myopathy.

Casimir forces on a silicon micromechanical chip.

Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices. Nevertheless, utilization of Casimir forces on the chip level remains a major challenge because all experiments so far require an external object to be manually positioned close to the mechanical element. Here by integrating a force-sensing micromechanical beam and an electrostatic actuator on a single chip, we demonstrate the Casimir effect between two micromachined silicon components on the same substrate. A high degree of parallelism between the two near-planar interacting surfaces can be achieved because they are defined in a single lithographic step. Apart from providing a compact platform for Casimir force measurements, this scheme also opens the possibility of tailoring the Casimir force using lithographically defined components of non-conventional shapes.

The clinical pharmacogenomics implementation consortium: CPIC guideline for SLCO1B1 and simvastatin-induced myopathy.

Cholesterol reduction from statin therapy has been one of the greatest public health successes in modern medicine. Simvastatin is among the most commonly used prescription medications. A non-synonymous coding single-nucleotide polymorphism (SNP), rs4149056, in SLCO1B1 markedly increases systemic exposure to simvastatin and the risk of muscle toxicity. This guideline explores the relationship between rs4149056 (c.521T>C, p.V174A) and clinical outcome for all statins. The strength of the evidence is high for myopathy with simvastatin. We limit our recommendations accordingly.