Pyrene-Labeled and Quaternized Chitosan: Synthesis, Characterization, and Its Potential Application for Fluorescently Trackable Nucleic Acid Delivery into Cells.

A chitosan derivative (Pyr-CS-HTAP) having pyrene (Pyr) and N-[(2-hydroxyl-3-trimethylammonium)] propyl (HTAP) units conjugated at C6 and C2 positions, respectively, was synthesized and characterized. Dynamic light scattering and scanning electron microscopy revealed that Pyr-CS-HTAP self-assembled into spherical nanoparticles with a hydrodynamic diameter of 211 ± 5 nm and a ζ-potential of +49 mV. The successful binding of Pyr-CS-HTAP with nucleic acid was ascertained by fluorescence resonance energy-transfer analysis and gel electrophoresis. Pyr-CS-HTAP facilitated the cellular uptake of nucleic acid up to 99%. Co-localization analysis using fluorescence microscopy revealed the endosomal escape of the Pyr-CS-HTAP/nucleic acid complexes and the successful release of the nucleic acid cargoes from the polyplexes into the nucleus. It is strongly believed that Pyr-CS-HTAP can potentially be developed into a fluorescently trackable gene delivery system in the future.

Lithium-Templated Formation of Polyhedral Oligomeric Silsesquioxanes (POSS).

A coordination complex, lithium hepta(i-butyl)silsesquioxane trisilanolate (1; Li-T7), a stable intermediate in silsesquioxane (SQ) syntheses, was successfully isolated in 65% yield and found to be highly soluble in nonpolar solvents such as hexane. The structure of Li-T7 was confirmed by NMR, IR spectroscopy, matrix-assisted laser desorption ionization time-of-flight mass spectrometry, electrospray ionization mass spectrometry, and computational simulation, providing detailed elucidation of the intermolecular self-association of the SQ cage with a box-shaped Li6O6 polyhedron through strong coordination bonds. After acid treatment, Li-T7 undergoes lithium-proton cationic exchange, yielding hepta(i-butyl)silsesquioxane trisilanol (2; H-T7) quantitatively. The high yield of H-T7 seems to be influenced by Li-O bonding in the Li-T7 complex that affects the selective formation of hepta(i-butyl)silsesquioxane trisilanolate and the bulky i-butyl groups which may prevent decomposition or SQ cage-rearrangement even at reflux under alkaline conditions. Single-crystal X-ray crystallography confirms the presence of the dumbbell-shaped SQ partial cages through strong intermolecular hydrogen bonds. Interestingly, lowering the polarity of the reaction solution by adding dichloromethane results in formation of the cubic octa(i-butyl)silsesquioxane (3; T8) cage in a good yield (47%), which is isolated by crystallization from the reaction solution.

Thermoresponsive and Active Functional Fiber Mats for Cultured Cell Recovery.

Thermoresponsive and active functional fiber mats were prepared from random copolymer of poly(pentafluorophenyl acrylate-co-N-isopropylacrylamide) (P(PFPA-co-NIPAM)), which was synthesized by a controlled radical polymerization process based on reversible addition-fragmentation chain transfer (RAFT). As reactive sites, pentafluorophenyl ester (PFP) groups were incorporated in the copolymer to allow for a multiple post-polymerization modification. UV-cross-linkable moieties were first introduced by partially reacting PFP groups in the copolymer with ortho-nitrobenzyl (ONB)-protected diamine. Electrospinning the resulting ONB-containing P(PFPA-co-NIPAM), followed by UV-induced cross-linking, yielded stable cross-linked thermoresponsive PNIPAM-based fiber mats. The remaining PFP active groups on the surface of copolymer fiber mats allowed for further conjugation with an H-Gly-Arg-Gly-Asp-Ser-OH (GRGDS) peptide, a well-known cell adhesive peptide sequence that was selected as a model in order to promote cell growth. At 37 °C, fibroblast cells were found to attach, spread, and proliferate well on the GRGDS-immobilized cross-linked (CL) fiber mat, as opposed to those on the GRGDS-immobilized un-cross-linked (UCL) fiber mat. By decreasing the temperature down to 20 °C, i.e. below the lower critical solution temperature (LCST) of thermoresponsive PNIPAM, cultured cells could easily be released from both GRGDS-immobilized CL and UCL fiber mats, whereas no cells were detached from tissue culture polystyrene (TCPS). These results suggest that the thermosensitive and active functional fiber mat obtained in this research represent an attractive and versatile platform for cultured cell recovery, which is beneficial for tissue engineering applications.

Microencapsulation of menthol by crosslinked chitosan via porous glass membrane emulsification technique and their controlled release properties.

Chitosan-encapsulated menthol microcapsules were successfully prepared in an oil-in-water (o/w) emulsion using the Shirasu Porous Glass (SPG) membrane emulsification technique and high-speed dispersion technique for preparing a mixed o/w emulsion. The size of the menthol-loaded chitosan microcapsules was strongly depended on the average pore size of the SPG membrane and the amount of menthol loading in the dispersed phase. The membrane pore size of 5.2 µm was suitable for a viscous dispersed phase containing light mineral oil. The average diameter of emulsion droplets of 28.3 µm was obtained. Increasing the menthol loading in the dispersion phase from 5% to 10% w/w of chitosan decreased the emulsion droplet size with a broad size distribution. The crosslinked microcapsule size and size distribution of mixed emulsion droplets decreased with the increasing crosslinking time. The menthol release was a diffusion control which depended on the proportion of amino group in chitosan-to-tripolyphosphate molar ratio and crosslinking time. This work also demonstrated that hydrophilicity/hydrophobicity of the continuous phase and dispersion phase controlled SPG membrane emulsification efficiency and quality of the resulting emulsion droplets.

Surface-grafted poly(acrylic acid) brushes as a precursor layer for biosensing applications: effect of graft density and swellability on the detection efficiency.

Carboxyl groups along poly(acrylic acid) (PAA) brushes attached to the surface of a gold-coated substrate served as the precursor moieties for the covalent immobilization of amino-functionalized biotin or bovine serum albumin (BSA) to form a sensing probe for streptavidin (SA) or anti-BSA detection, respectively. Surface-grafted PAA brushes were obtained by acid hydrolysis of poly(tert-butyl acrylate) brushes, formerly prepared by surface-initiated atom transfer radical polymerization of tert-butyl acrylate. As determined by surface plasmon resonance, the PAA brushes immobilized with functionalized biotin or BSA probes not only showed good binding with the designated target analytes but also maintained a high resistance to nonspecific protein adsorption, especially those PAA brushes with a high surface graft density. Although the probe binding capacity can be raised as a function of the graft density of the PAA brushes or the amount of carboxyl groups along the PAA chains, the accessibility of the target analyte to the immobilized probe was limited at the high graft density of the PAA brushes. The effect was far more apparent for the BSA-anti-BSA probe-analyte pair than for the much smaller biotin-SA probe-analyte pair. The impact of the swellability of the PAA brushes, as tailored by the degree of carboxyl group activation, on both the sensing probe immobilization and analyte detection was also addressed. This investigation demonstrated that PAA brushes having a defined graft density have a promising potential as a precursor layer for biosensing applications.

Development of a novel antifouling platform for biosensing probe immobilization from methacryloyloxyethyl phosphorylcholine-containing copolymer brushes.

The immobilization of thiol-terminated poly[(methacrylic acid)-ran-(2-methacryloyloxyethyl phosphorylcholine)] (PMAMPC-SH) brushes on gold-coated surface plasmon resonance (SPR) chips was performed using the "grafting to" approach via self-assembly formation. The copolymer brushes provide both functionalizability and antifouling characteristics, desirable features mandatorily required for the development of an effective platform for probe immobilization in biosensing applications. The carboxyl groups from the methacrylic acid (MA) units were employed for attaching active biomolecules that can act as sensing probes for biospecific detection of target molecules, whereas the 2-methacryloyloxyethyl phosphorylcholine (MPC) units were introduced to suppress unwanted nonspecific adsorption. The detection efficiency of the biotin-immobilized PMAMPC brushes with the target molecule, avidin (AVD), was evaluated in blood plasma in comparison with the conventional 2D monolayer of 11-mercaptoundecanoic acid (MUA) and homopolymer brushes of poly(methacrylic acid) (PMA) also immobilized with biotin using the SPR technique. Copolymer brushes with 79 mol % MPC composition and a molecular weight of 49.3 kDa yielded the platform for probe immobilization with the best performance considering its high S/N ratio as compared with platforms based on MUA and PMA brushes. In addition, the detection limit for detecting AVD in blood plasma solution was found to be 1.5 nM (equivalent to 100 ng/mL). The results have demonstrated the potential for using these newly developed surface-attached PMAMPC brushes for probe immobilization and subsequent detection of designated target molecules in complex matrices such as blood plasma and clinical samples.

Plasma nano-modification of poly(ethylene terephthalate) fabric for pigment adhesion enhancement.

Poly(ethylene terephthalate) (PET) fabrics were modified by treating with radio frequency (RF) plasma of different gases, including argon (Ar), nitrogen (N2), oxygen (O2) and sulfur hexafluoride (SF6), under varied power (50-150 watt) and time period (0.5-20 min). Observations indicated that plasma has affected the morphology and roughness of PET fiber surface in the nano-scale level. After plasma treatment, test patterns were printed by inkjet printer directly onto the sample surface. The enhancement of color printing performance on PET fabric by plasma treatment was evaluated by color spectroscopy. The surface nano-modified PET fabrics by Ar, N2, O2, and SF6 plasmas all exhibited enhanced color yield. AFM, SEM, FTIR-ATR and XPS results suggested that the improved pigment color yield was neither clearly contributed by the wettability of the fabrics nor the polar group induced onto the fiber surfaces but rather mainly by the alteration of surface roughness.

Amphiphilic quaternized chitosan: Synthesis, characterization, and anti-cariogenic biofilm property.

Hydrophobized chitosan derivatives, hexyl chitosan (HCS), dodecyl chitosan (DCS), and phthaloyl chitosan (PhCS) of approximately 30 and 50% degree of substitution (%DS) reacted with glycidyltrimethylammonium chloride (GTMAC) to incorporate hydrophilic positively charged groups of N-[(2-hydroxyl-3-trimethylammonium)propyl] and yielded amphiphilic quaternized chitosan derivatives. They can assemble into spherical nanoparticles with a hydrodynamic diameter of ~100-300 nm and positive ζ-potential values (+15 to +56). Their anti-biofilm efficacy was evaluated against the dental caries pathogen, Streptococcus mutans. Among all derivatives, the one having 30%DS of hexyl group and prepared by reacting with 1 mol equivalent of GTMAC (H30CS-GTMAC) showed the best performance in terms of its aqueous solubility, the lowest minimum inhibitory concentration (138 µg/mL) and the minimum bactericidal concentration (275 µg/mL) which are superior to the unmodified chitosan. Its equivalent anti-biofilm efficacy to that of chlorhexidine suggests that it can be a greener antibacterial agent for oral care formulations.

Amphiphilic Chitosan Bearing Double Palmitoyl Chains and Quaternary Ammonium Moieties as a Nanocarrier for Plasmid DNA.

Amphiphilic chitosan, bPalm-CS-HTAP, having N-(2-((2,3-bis(palmitoyloxy)propyl)amino)-2-oxoethyl) (bPalm) groups as double hydrophobic tails and O-[(2-hydroxyl-3-trimethylammonium)] propyl (HTAP) groups as hydrophilic heads was synthesized and evaluated for its self-assembly properties and potential as a gene carrier. The degree of bis-palmitoyl group substitution (DS bPalm) and the degree of quaternization (DQ) were approximately 2 and 56%, respectively. bPalm-CS-HTAP was found to assemble into nanosized spherical particles with a hydrodynamic diameter (D H) of 265.5 ± 7.40 nm (PDI = 0.5) and a surface charge potential of 40.1 ± 0.04 mV. bPalm-CS-HTAP condensed the plasmid pVAX1.CoV2RBDme completely at a bPalm-CS-HTAP:pDNA ratio of 2:1. The self-assembled bPalm-CS-HTAP/pDNA complexes could enter HEK 293A and CHO cells and enabled gene expression at negligible cytotoxicity compared to commercial PEI (20 kDa). These results suggested that bPalm-CS-HTAP can be used as a promising nonviral gene carrier.

Enhanced adsorptive composite foams for copper (II) removal utilising bio-renewable polyisoprene-functionalised carbon derived from coconut shell waste.

A bio -renewable polyisoprene obtained from Hevea Brasiliensis was used to produce functionalised carbon composite foam as an adsorbent for heavy metal ions. Functionalised carbon materials (C-SO3H, C-COOH, or C-NH2) derived from coconut shell waste were prepared via a hydrothermal treatment. Scanning electron microscopy images showed that the functionalised carbon particles had spherical shapes with rough surfaces. X-ray photoelectron spectroscopy confirmed that the functional groups were successfully functionalised over the carbon surface. The foaming process allowed for the addition of carbon (up to seven parts per hundred of rubber) to the high ammonia natural rubber latex. The composite foams had open pore structures with good dispersion of the functionalised carbon. The foam performance on copper ion adsorption has been investigated with regard to their functional group and adsorption conditions. The carbon foams achieved maximum Cu(II) adsorption at 56.5 [Formula: see text] for C-SO3H, 55.7 [Formula: see text] for C-COOH, and 41.9 [Formula: see text] for C-NH2, and the adsorption behaviour followed a pseudo-second order kinetics model.

Synthesis of ZnO/SiO2-modified starch-graft-polyacrylate superabsorbent polymer for agricultural application.

A bio-based superabsorbent polymer (SAP) for agricultural application was synthesized from modified starch (MS) to enhance its antibacterial property and biodegradability. The starch was modified by zinc oxide and tetraethyl orthosilicate via a sol-gel reaction under an acidic condition. Structural and morphological examinations were used to confirm the modification. The MS showed a good antibacterial activity against Staphylococcus aureus and Escherichia coli with 61.9 % and 99.9 % reduction in viable cells, respectively, after a 1 h exposure. The MS was then graft copolymerized with potassium acrylate monomer to synthesize a new MS-g-polyacrylate (PA) SAP. The grafting reaction was confirmed and the main factors for agricultural applications along with its biodegradation and antibacterial properties were achieved. The MS-g-PA SAP exhibited an excellent reusability and biodegradation. Importantly, the MS-g-PA SAP did not impose growth inhibition of mung bean (Vigna radiata), but provided some transient drought relief.

Sequential post-polymerization modification of a pentafluorophenyl ester-containing homopolymer: a convenient route to effective pH-responsive nanocarriers for anticancer drugs.

Recently, pH-responsive polymeric micelles have gained significant attention as effective carriers for anti-cancer drug delivery. Herein, pH-responsive polymeric micelles were constructed by a simple post-polymerization modification of a single homopolymer, poly(pentafluorophenyl acrylate) (PPFPA). The PPFPA was first subjected to modification with 1-amino-2-propanol yielding the amphiphilic copolymer of poly(pentafluorophenyl acrylate)-ran-poly(N-(2-hydroxypropyl acrylamide)). A series of amphiphilic random copolymers of different compositions could self-assemble into spherical micelles with a unimodal size distribution in aqueous solution. Then, 1-(3-aminopropyl)imidazole (API), a reagent to introduce charge conversional entities, was reacted with the remaining PPFPA segment in the micellar core resulting in API-modified micelles which can encapsulate doxorubicin (DOX), a hydrophobic anti-cancer drug. As monitored by dynamic light scattering, the API-modified micelles underwent disintegration upon pH switching from 7.4 to 5.0, presumably due to imidazolyl group protonation. This pH-responsiveness of the API-modified micelles was responsible for the faster and greater in vitro DOX release in an acidic environment than neutral pH. Cellular uptake studies revealed that the developed carriers were internalized into MDA-MB-231 cells within 30 min via endocytosis and exhibited cytotoxicity in a dose-dependent manner.

Norbornene-Functionalized Plant Oils for Biobased Thermoset Films and Binders of Silicon-Graphite Composite Electrodes.

We herein report the functionalization of plant oil with norbornene (NB) and subsequent polymerization to prepare biobased thermoset films and biobased binders for silicon/mesocarbon microbead (MCMB) composite electrodes for use in lithium-ion batteries. A series of NB-functionalized plant oils were prepared as biobased thermoset films via ring-opening metathesis polymerization (ROMP) in the presence of a second-generation Grubbs catalyst with tunable thermomechanical properties. Increasing the catalyst loading and cross-linking agent increased cross-link density, storage modulus (E'), and glass transition temperature (T g), while the numbers of unreacted or oligomeric components in the films were reduced. High number of NB rings per triglyceride in the plant oil encouraged monomer incorporation to form a polymer network, therefore accounting for the high T g and E' values. Furthermore, the NB-functionalized plant oil and 2,5-norbornadiene (NBD) were copolymerized as bioderived binders for silicone/MCMB composite electrodes of lithium-ion batteries via ROMP during electrode preparation. Cell performance investigation showed that the silicone/MCMB composite electrode bearing the NBD-cross-linked NB-functionalized plant oil binder exhibited a higher C-rate and cycle-life performance than that using a conventional poly(vinylidene fluoride) (PVDF) binder. Finally, the electrode based on the bioderived binder exhibited a high specific charge capacity of 620 mA h g-1 at 0.5 C.

Anion identification using silsesquioxane cages.

Anthracene-conjugated octameric silsesquioxane (AnSQ) cages, prepared via Heck coupling between octavinylsilsesquioxane (OVS) and 9-bromoanthracene, thermodynamically display intramolecular excimer emissions. More importantly, these hosts are sensitive to each anionic guest, thereby resulting in change of anthracene excimer formation, displaying the solvent-dependent fluorescence and allowing us to distinguish up to four ions such as F-, OH-, CN- and PO4 3- by fluorescence spectroscopy. Depending on the solvent polarity, for example, both F- and CN- quenched the fluorescence emission intensity in THF, but only F- could enhance the fluorescence in all other solvents. The presence of PO4 3- results in fluorescence enhancements in high polarity solvents such as DMSO, DMF, and acetone, while OH- induces enhancements only in low polarity solvents (e.g. DCM and toluene). A picture of the anion recognizing ability of AnSQ was obtained through principal component analysis (PCA) with NMR and FTIR confirming the presence of host-guest interactions. Computational modeling studies demonstrate the conformation of host-guest complexation and also the change of excimer formation. Detection of F-, CN- and OH- by AnSQ hosts in THF is noticeable with the naked eye, as indicated by strong color changes arising from charge transfer complex formation upon anion addition.

Alternating bioactivity of multilayer thin films assembled from charged derivatives of chitosan.

Charged derivatives of chitosan, N-sulfofurfuryl chitosan (SFC) and N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC) were prepared by reductive alkylation of amino groups of chitosan (CHI) using 5-formyl-2-furansulfonic acid, sodium salt (FFSA) as a reagent and ring opening of glycidyltrimethylammonium chloride (GTMAC) by amino groups of chitosan, respectively. The chemical structures of the charged derivatives were verified by (1)H NMR and FTIR analyses. Multilayer assembly of SFC, HTACC, CHI and the selected oppositely charged polyelectrolytes was monitored by a quartz crystal microbalance (QCM). Stratification of the multilayer film fabricated on plasma-treated poly(ethylene terephthalate) (treated PET) substrate was demonstrated by water contact angle data. The coverage of the assembled films was characterized by AFM and ATR-FTIR analyses. The bioactivity of the deposited multilayer film on the treated PET substrate was tested against selected proteins having a distinctive size and charge. This research strongly suggests that both SFC and HTACC are potential candidates for altering the surface bioactivity of materials.

Polymer brushes in nanopores surrounded by silicon-supported tris(trimethylsiloxy)silyl monolayers.

A chemically grafted tris(trimethylsiloxy)silyl (tris(TMS)) monolayer on a silicon oxide substrate was used as a template for creating nanoclusters of polymer brushes. Polymer brushes were synthesized by surface-initiated polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and tert-butyl methacrylate (t-BMA) via atom transfer radical polymerization (ATRP) from alpha-bromoester groups tethered to the residual silanol groups on the silicon surface after generating a range of tris(TMS) coverage. CuBr/bpy and CuBr/PMDETA were used as the catalytic system for PMPC and Pt-BMA synthesis, respectively. The percentage of tris(TMS) coverage significantly influenced the thickness and morphology of the polymer brushes. Protrusions representing self-aggregation of PMPC brushes in nanopores as visualized by AFM analysis evidently suggested that PMPC brushes were distributed nanoscopically on the surface. The protrusion size and surface roughness corresponded quite well with the graft density of PMPC brushes. The fact that Pt-BMA brushes grown from nanopores were almost featureless implies that self-aggregation of PMPC brushes is truly a consequence of phase incompatibility between hydrophilic PMPC brushes and hydrophobic tris(TMS). The anti-fouling characteristic of PMPC brushes, inferred from plasma protein adsorption, was subsequently varied by controlling the surface coverage ratio between PMPC brushes and tris(TMS).

Cascade post-polymerization modification of single pentafluorophenyl ester-bearing homopolymer as a facile route to redox-responsive nanogels.

Poly(pentafluorophenyl methacrylate) (PPFPMA) was first subjected to post-polymerization modification with oligo(ethylene glycol) methyl ether amine (OEG-NH2) and yielded poly(pentafluorophenyl methacrylate)-co-poly(oligo(ethylene glycol methacrylamide)), PPFPMA-co-POEGMAM. These amphiphilic random copolymers can self-assemble into micellar nanoparticles in water having sizes less than 100nm. By tandemly reacting the pentafluorophenyl (PFP) groups in the copolymeric nanoparticles with a dithiol crosslinker, cystamine, redox-responsive nanogels can be formed. The last step of post functionalization with isopropylamine was introduced in order to remove the remaining PFP groups in the nanogels. Stepwise post functionalization can be monitored by FTIR and 19F NMR spectroscopy. Release of a model hydrophobic drug, nile red (NR) from the nanogels, simultaneously encapsulated during micelles formation, can be accelerated in the presence of glutathione (GSH) especially at 37°C. Results from cytocompatibility evaluation suggested that these developed redox-responsive nanogels strongly possessed a potential for applications in controlled delivery.

Silsesquioxane cages as fluoride sensors.

Pyrene functionalized silsesquioxane cages (PySQ) not only provide significant fluorescence from pyrene-pyrene excimers with a very large Stokes shift (Δλ = 143 nm, 69 930 cm-1) in DMSO but also exhibit fluoride capture results coincidentally with a π-π* fluorescence enhancement. On the other hand, PySQ-F- in THF significantly exhibits π-π* fluorescence quenching and a color change can be observed with the naked eye from light yellow to deep orange by forming a charge-transfer (CT) complex among the pyrenyl rings. Moreover, PySQ selectively captures F- with a response time of <2 min and with a very low detection limit (1.61 ppb), while 19F NMR is used to confirm encapsulation of F- with Δδ = 19 ppm.

Encapsulated eucalyptus oil in ionically cross-linked alginate microcapsules and its controlled release.

Sodium alginate microcapsules containing eucalyptus oil were prepared by oil-in-water emulsification via Shirasu porous glass (SPG) membrane and cross-linked by calcium chloride (CaCl2). SPG membrane pore size of 5.2µm was used to control the size of eucalyptus oil microdroplets. Effects of sodium alginate, having a mannuronic acid/guluronic acid (M/G) ratio of 1.13, eucalyptus oil and CaCl2 amounts on microdroplet sizes and size distribution were elucidated. Increasing sodium alginate amounts from 0.1 to 0.5% (wv(-1)) sodium alginate, the average droplets size increased from 42.2±2.0 to 48.5±0.6µm, with CVs of 16.5±2.2 and 30.2±4.5%, respectively. CaCl2 successfully gave narrower size distribution of cross-linked eucalyptus oil microcapsules. The optimum conditions for preparing the microcapsules, oil loading efficiency, and controlled release of the encapsulated eucalyptus oil from the microcapsules as a function of time at 40°C were investigated. Release model for the oil from microcapsules fitted Ritger-Peppas model with non-Fickian transport mechanism.

Quaternized chitosan particles as ion exchange supports for label-free DNA detection using PNA probe and MALDI-TOF mass spectrometry.

Quaternized chitosan particles are introduced as anion-exchanged captures to be used with a conformationally constrained pyrrolidinyl peptide nucleic acid (acpcPNA) and MALDI-TOF mass spectrometry for DNA sequence analysis. Methylated chitosan (MC) and methylated N-benzyl chitosan (MBzC) particles were obtained by heterogeneous chemical modification of ionically cross-linked chitosan particles via direct methylation and reductive benzylation/methylation, respectively. N,N,N-trimethylchitosan (TMC) and N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC) particles were prepared by ionic cross-linking of quaternized chitosan derivatives, homogeneously modified from chitosan, namely TMC and HTACC, respectively. The particles formed had a size in a sub-micrometer range and possessed positive charge. Investigation by MALDI-TOF mass spectrometry suggested that some quaternized particles in combination with acpcPNA were capable of detecting a single mismatched base out of 9-14 base DNA sequences. Potential application of this technique for the detection of wild-type and mutant K-ras DNA, a gene that mutation is associated with certain cancers, has also been demonstrated.