ABSTRACT
Sex and chronological age estimation are crucial in forensic investigations and research on individual identification. Although manual methods for sex and age estimation have been proposed, these processes are labor-intensive, time-consuming, and error-prone. The purpose of this study was to estimate sex and chronological age from panoramic radiographs automatically and robustly using a multi-task deep learning network (ForensicNet). ForensicNet consists of a backbone and both sex and age attention branches to learn anatomical context features of sex and chronological age from panoramic radiographs and enables the multi-task estimation of sex and chronological age in an end-to-end manner. To mitigate bias in the data distribution, our dataset was built using 13,200 images with 100 images for each sex and age range of 15-80 years. The ForensicNet with EfficientNet-B3 exhibited superior estimation performance with mean absolute errors of 2.93 ± 2.61 years and a coefficient of determination of 0.957 for chronological age, and achieved accuracy, specificity, and sensitivity values of 0.992, 0.993, and 0.990, respectively, for sex prediction. The network demonstrated that the proposed sex and age attention branches with a convolutional block attention module significantly improved the estimation performance for both sex and chronological age from panoramic radiographs of elderly patients. Consequently, we expect that ForensicNet will contribute to the automatic and accurate estimation of both sex and chronological age from panoramic radiographs.
Subject(s)
Deep Learning , Radiography, Panoramic , Sex Determination by Skeleton , Humans , Male , Adult , Aged , Female , Adolescent , Middle Aged , Aged, 80 and over , Young Adult , Republic of Korea , Sex Determination by Skeleton/methods , Age Determination by Teeth/methodsABSTRACT
A novel actinobacterial strain, designated AGMB00827T, was isolated from swine faeces. Strain AGMB00827T was obligately anaerobic, Gram-stain-positive, non-motile, non-spore-forming and rod-shaped bacterium. Comparative analyses based on the 16S rRNA gene and whole genome sequence revealed that strain AGMB00827T was affiliated to the genus Collinsella, and was most closely related to Collinsella vaginalis Marseille-P2666T (= KCTC 25056T). Biochemical analysis showed strain AGMB00827T was negative for catalase and oxidase. Interestingly, strain AGMB00827T possessed urease activity, which was determined by traditional methods (API test and Christensen's urea medium), unlike related strains. Furthermore, the major cellular fatty acids (> 10%) of the isolate were C18:1 ω9c, C16:0, C16:0 DMA and C18:2 ω9,12c DMA. Based on the whole genome sequence analysis, the DNA G + C content of strain AGMB00827T was 52.3%, and the genome size and numbers of rRNA and tRNA genes were 1,945,251 bp, 3 and 46, respectively. The average nucleotide identity and digital DNA-DNA hybridization values between strain AGMB00827T and C. vaginalis KCTC 25056 T were 71.0 and 23.2%, respectively. Additionally, the genome analysis revealed that strain AGMB00827T possesses urease gene cluster including ureABC and ureDEFG while the related strains do not have those genes, which is consistent with the urease activity. On the basis of polyphasic taxonomic approach, strain AGMB00827T represents a novel species within the genus Collinsella, for which the name Collinsella urealyticum sp. nov. is proposed. The type strain is AGMB00827T (= KCTC 25287T = GDMCC 1.2724T).
Subject(s)
Fatty Acids , Urease , Animals , Swine , Phylogeny , Urease/genetics , RNA, Ribosomal, 16S/genetics , DNA, Bacterial/genetics , Fatty Acids/analysis , Feces/microbiology , Bacterial Typing Techniques , Sequence Analysis, DNA , Phospholipids/analysisABSTRACT
A Gram-negative, obligate anaerobic, non-motile, non-spore-forming, rod-shaped bacterial strain designated AGMB00274T was isolated from swine faeces. An 16S rRNA gene analysis indicated that strain AGMB00274T belonged to the genus Parabacteroides, with the highest similarity to Parabacteroides johnsonii (P. johnsonii) DSM 18315T (sequence similarity of 94.9%). The genome size of strain AGMB00274T was 4,308,683 bp, with a DNA G+C content of 42.5 mol%. The biochemical analysis of strain AGMB00274T showed that it was positive for gelatin hydrolysis and α-fucosidase, but negative for the acid production from D-glucose, D-mannitol, D-maltose, salicin, glycerol, D-cellobiose, D-mannose, D-melezitose, D-sorbitol, D-trehalose, and negative for α-arabinosidase, glutamic acid decarboxylase, and pyroglutamic acid arylamidase. The dominant cellular fatty acids (> 10%) of the isolate were anteiso-C15: 0 (23.2%), iso-C15: 0 (16.6%), C18: 1 ω9c (16.4%), summed feature 11 (iso-C17: 0 3-OH and/or C18: 2 DMA) (12.5%), and C16: 0 (11.3%). The major respiratory quinones of strain AGMB00274T were MK-9 (55.4%) and MK-10 (44.6%). The major polar lipid was phosphatidylethanolamine. Based on phylogenetic, genetic, physiological, and chemotaxonomic analyses, as a novel species of the genus Parabacteroides, strain AGMB00274T was proposed with the name Parabacteroides faecalis sp. nov. The type strain used was AGMB00274T (= KCTC 25286T = GDMCC 1.2742T).
Subject(s)
Bacteroidetes , Phylogeny , Animals , Bacterial Typing Techniques , DNA, Bacterial/genetics , Fatty Acids/chemistry , Feces/microbiology , Phospholipids/chemistry , RNA, Ribosomal, 16S/genetics , Sequence Analysis, DNA , Swine/microbiology , Vitamin K 2/chemistry , Bacteroidetes/classification , Bacteroidetes/isolation & purificationABSTRACT
The purpose of this study was to automatically classify the three-dimensional (3D) positional relationship between an impacted mandibular third molar (M3) and the inferior alveolar canal (MC) using a distance-aware network in cone-beam CT (CBCT) images. We developed a network consisting of cascaded stages of segmentation and classification for the buccal-lingual relationship between the M3 and the MC. The M3 and the MC were simultaneously segmented using Dense121 U-Net in the segmentation stage, and their buccal-lingual relationship was automatically classified using a 3D distance-aware network with the multichannel inputs of the original CBCT image and the signed distance map (SDM) generated from the segmentation in the classification stage. The Dense121 U-Net achieved the highest average precision of 0.87, 0.96, and 0.94 in the segmentation of the M3, the MC, and both together, respectively. The 3D distance-aware classification network of the Dense121 U-Net with the input of both the CBCT image and the SDM showed the highest performance of accuracy, sensitivity, specificity, and area under the receiver operating characteristic curve, each of which had a value of 1.00. The SDM generated from the segmentation mask significantly contributed to increasing the accuracy of the classification network. The proposed distance-aware network demonstrated high accuracy in the automatic classification of the 3D positional relationship between the M3 and the MC by learning anatomical and geometrical information from the CBCT images.
Subject(s)
Mandibular Canal , Molar, Third , Humans , Molar, Third/diagnostic imaging , Mandible/diagnostic imaging , Molar , Tongue , Cone-Beam Computed Tomography/methodsABSTRACT
BACKGROUND: The purpose of this study was to compare the segmentation performances of the 2D, 2.5D, and 3D networks for maxillary sinuses (MSs) and lesions inside the maxillary sinus (MSL) with variations in sizes, shapes, and locations in cone beam CT (CBCT) images under the same constraint of memory capacity. METHODS: The 2D, 2.5D, and 3D networks were compared comprehensively for the segmentation of the MS and MSL in CBCT images under the same constraint of memory capacity. MSLs were obtained by subtracting the prediction of the air region of the maxillary sinus (MSA) from that of the MS. RESULTS: The 2.5D network showed the highest segmentation performances for the MS and MSA compared to the 2D and 3D networks. The performances of the Jaccard coefficient, Dice similarity coefficient, precision, and recall by the 2.5D network of U-net + + reached 0.947, 0.973, 0.974, and 0.971 for the MS, respectively, and 0.787, 0.875, 0.897, and 0.858 for the MSL, respectively. CONCLUSIONS: The 2.5D segmentation network demonstrated superior segmentation performance for various MSLs with an ensemble learning approach of combining the predictions from three orthogonal planes.
Subject(s)
Maxillary Sinus , Spiral Cone-Beam Computed Tomography , Humans , Cone-Beam Computed Tomography/methods , Image Processing, Computer-Assisted/methods , Maxillary Sinus/diagnostic imaging , Deep Learning , Sinus Floor AugmentationABSTRACT
BACKGROUND: This study aimed to develop evidence-based clinical imaging guidelines to assess the proper implant location following implant surgery and identify potential complications during follow-up. METHODS: The guideline development process employed an adaptation methodology in accordance with the Korean clinical imaging guidelines (K-CIG). Core (Ovid-Medline, Ovid-Embase, National Guideline Clearinghouse, and Guideline International Network) and domestic databases (KoreaMed, KMbase, and KoMGI) were searched used to retrieve guidelines, and two reviewers analyzed the retrieved articles. The articles were included in this review using well-established inclusion criteria. RESULTS: Our online search identified 66 articles, of which 3 were selected for the development of the guidelines. Consequently, based on these three guidelines, we formulated distinct recommendations regarding the appropriate imaging modalities that should be used following implant placement. CONCLUSIONS: Conventional imaging (e.g., periapical or panoramic radiography) should be the first choice for assessing the implant following its placement and osseointegration. The metal artifacts in Cone Beam Computed Tomography (CBCT) should be considered. However, CBCT is recommended for patients with sensory abnormalities following dental implant surgery to evaluate and identify the underlying cause of implant complications and to determine the appropriate treatment.
Subject(s)
Cone-Beam Computed Tomography/methods , Dental Implants , Radiography, Panoramic/methods , Evidence-Based Dentistry , Humans , Osseointegration , Practice Guidelines as TopicABSTRACT
BACKGROUND: The purpose of this study was to analyze the correlation between spatial resolution and ball distortion rate of panoramic radiography and to elucidate the minimum criterion for ball distortion rate, which is very relevant to clinical readability. METHODS: Horizontal and vertical spatial resolution and ball distortion rates were calculated in the same position, such as the incisor, premolar, molar, and temporomandibular joint area with various object depths corresponding to 48 mm. Three devices were evaluated. A region showing spatial resolution above the reference standard was selected, and the ball distortion rate corresponding to the same region was divided into horizontal and vertical phantom groups. The mean and standard deviation of the obtained ball distortion rates were calculated. Student's t-test was used to statistically analyze the mean difference in ball distortion rates between vertical and horizontal phantom groups. RESULTS: In all devices, the horizontal line pair phantom, but not the vertical line pair phantom, was readable in all areas measured at the line pair value of at least 1.88 lp/mm. The line pair value tended to be higher toward the center and lower toward the outside. The ball distortion rate tended to decrease closer to the center and increased further away. In addition, ball distortion rates could not be measured at some areas as they were not recognized as balls due to the high degree of distortion at the outermost and innermost sides. The number of balls satisfying the reference value using the horizontal line pair phantom was 102 (mean of ball distortion rates, 20.98; standard deviation, 15.25). The number of balls satisfying the reference value using the vertical line pair phantom was 49 (mean of ball distortion rates, 16.33; standard deviation, 14.25). However, mean ball distortion rate was not significantly different between the two groups. CONCLUSIONS: Image layer of panoramic radiography could be evaluated by the spatial resolution using horizontal and vertical line pair phantoms and by assessing ball distortion rates through a ball-type panorama phantom. A ball distortion rate of 20% could be used as a threshold to evaluate the image layer of panoramic radiography.
Subject(s)
Incisor/diagnostic imaging , Molar/diagnostic imaging , Radiography, Panoramic/instrumentation , Temporomandibular Joint/diagnostic imaging , Humans , Phantoms, Imaging , Radiographic Image Interpretation, Computer-Assisted/methodsABSTRACT
The purpose of this study was to develop a quantitative AR-assisted free-hand orthognathic surgery method using electromagnetic (EM) tracking and skin-attached dynamic reference. The authors proposed a novel, simplified, and convenient workflow for augmented reality (AR)-assisted orthognathic surgery based on optical marker-less tracking, a comfortable display, and a non-invasive, skin-attached dynamic reference frame. The 2 registrations between the physical (EM tracking) and CT image spaces and between the physical and AR camera spaces, essential processes in AR-assisted surgery, were pre-operatively performed using the registration body complex and 3D depth camera. The intraoperative model of the maxillary bone segment (MBS) was superimposed on the real patient image with the simulated goal model on a flat-panel display, and the MBS was freely handled for repositioning with respect to the skin-attached dynamic reference tool (SRT) with quantitative visualization of landmarks of interest using only EM tracking. To evaluate the accuracy of AR-assisted Le Fort I surgery, the MBS of the phantom was simulated and repositioned by 6 translational and three rotational movements. The mean absolute deviations (MADs) between the simulation and post-operative positions of MBS landmarks by the SRT were 0.20, 0.34, 0.29, and 0.55âmm in x- (left lateral, right lateral), y- (setback, advance), and z- (impaction, elongation) directions, and RMS, respectively, while those by the BRT were 0.23, 0.37, 0.30, and 0.60âmm. There were no significant differences between the translation and rotation surgeries or among surgeries in the x-, y-, and z-axes for the SRT. The MADs in the x-, y-, and z-axes exhibited no significant differences between the SRT and BRT. The developed method showed high accuracy and reliability in free-hand orthognathic surgery using EM tracking and skin-attached dynamic reference.
Subject(s)
Orthognathic Surgical Procedures , Augmented Reality , Computer Simulation , Dermatologic Surgical Procedures , Electromagnetic Phenomena , Humans , Maxilla/surgery , Orthognathic Surgical Procedures/instrumentation , Orthognathic Surgical Procedures/methods , Phantoms, Imaging , Reproducibility of Results , SkinABSTRACT
BACKGROUND: The aim of the present study was to evaluate the effectiveness of intraductal irrigation using normal saline in chronic obstructive sialadenitis. METHODS: Patients who had one of the following symptoms were recruited: pain, swelling, stiffness, and dry mouth. A total of 58 salivary glands in 33 patients were diagnosed as having sialadenitis using sialography and ultrasonography. The patients were divided into two groups (swelling group and dry mouth group), according to the major complaint. Repeated intraductal irrigation was performed on each gland. Difference of symptom severity evaluated using numerical rating scale (NRS), and ductal width measured using ultrasonography were compared between the two groups. RESULTS: The average NRS score was significantly decreased from 6.0 to 3.3 after 3-5 visits of intraductal irrigation (P < 0.05). The reduction in NRS was greater in the swelling group than in the dry mouth group, although the difference between the groups was not statistically significant. There was no change of ductal width before and after the irrigation. CONCLUSIONS: Intraductal irrigation according to this study method using normal saline is a simple treatment for the patients with chronic obstructive sialadenitis. It provides a conservative treatment option reducing the subjective symptoms.
Subject(s)
Saline Solution/therapeutic use , Salivary Glands/diagnostic imaging , Sialadenitis/drug therapy , Sialography/methods , Therapeutic Irrigation , Adult , Aged , Aged, 80 and over , Chronic Disease , Humans , Middle Aged , Sialadenitis/diagnosis , Treatment Outcome , Ultrasonography , Xerostomia/etiologyABSTRACT
CONTEXT: Teriparatide (TPTD) therapy has been proposed as a potential treatment strategy in severe cases of pregnancy- and lactation-associated osteoporosis (PLO) characterized by the occurrence of fragility fractures in the third trimester or early postpartum. OBJECTIVE: To investigate the changes in bone mineral density (BMD) and bone turnover markers in patients with PLO with and without TPTD treatment. DESIGN: Retrospective cohort study. PATIENTS: Thirty-two patients with PLO who presented with multiple vertebral fractures to a tertiary institution between 2007 and 2015 were included. MEASUREMENTS: Changes in BMD at the lumbar spine (LSBMD) and proximal femur after 12 months of daily subcutaneous injections of 20 µg TPTD (n = 27) were assessed. Subjects who rejected the TPTD treatment were used as controls (n = 5). RESULTS: LSBMD increased in both subjects treated with TPTD and controls, with greater increases in the TPTD group (15.5 ± 6.6% vs 7.5 ± 7.1%, P = .020) after adjustment for age and baseline LSBMD. During follow-up, serum levels of osteocalcin (OCN) and C-telopeptide of type I collagen (CTX) increased significantly in the TPTD group. In multivariate linear regression models, TPTD treatment (adjusted ß = 7.92, P = .032) and younger age (adjusted ß = 1.06, P = .046), but not baseline LSBMD, body mass index, serum OCN level and CTX level, were independently associated with greater increases in LSBMD. CONCLUSIONS: In patients with PLO, LSBMD at 12 months increased in both the TPTD-treated and control groups. TPTD treatment and younger age were associated with greater increases in LSMBD irrespective of baseline LSBMD.
Subject(s)
Biomarkers/blood , Bone Density/physiology , Osteoporosis/blood , Osteoporosis/drug therapy , Teriparatide/therapeutic use , Adult , Female , Humans , Lactation , Postpartum Period , Pregnancy , Pregnancy Trimester, Third , Retrospective StudiesABSTRACT
Components derived from an infected lesion within the bone can spread through various passages in the mandible, particularly via the mental foramen. Radiologically, the spread of infection is typically nonspecific and challenging to characterize; however, multislice computed tomography (MSCT) can effectively detect pathological changes in soft tissues and the bone marrow space. This report describes the case of a 55-year-old woman who experienced mental nerve paresthesia due to a periapical infection of the right mandibular second premolar. MSCT imaging revealed increased attenuation around the periapical lesion extending into the mandibular canal and loss of the juxtamental foraminal fat pad. Following endodontic treatment of the tooth suspected to be the source of the infection, the patient's symptoms resolved, and the previous MSCT imaging findings were no longer present. Increased bone marrow attenuation and obliteration of the fat plane in the buccal aspect of the mental foramen may serve as radiologic indicators of inflammation spreading from the bone marrow space.
ABSTRACT
Medication-related osteonecrosis of the jaw (MRONJ) poses a challenging form of osteomyelitis in patients undergoing antiresorptive therapies in contrast to conventional osteomyelitis. This study aimed to compare the clinical and radiological features of MRONJ between patients receiving low-dose medications for osteoporosis and those receiving high-dose medications for oncologic purposes. The clinical, panoramic radiographic, and computed tomography data of 159 patients with MRONJ (osteoporotic group, n = 120; oncologic group, n = 39) who developed the condition after using antiresorptive medications for the management of osteoporosis or bone malignancy were analyzed. The osteoporotic group was older (75.8 vs. 60.4 years, p < 0.01) and had a longer duration of medication usage than the oncologic group (58.1 vs. 28.0 months, p < 0.01). Pus discharge and swelling were more common in the osteoporotic group (p < 0.05), whereas bone exposure was more frequent in the oncologic group (p < 0.01). The mandibular cortical index (MCI) in panoramic radiographs was higher in the osteoporotic group (p < 0.01). The mean sequestra size was larger in the oncologic group than in the osteoporotic group (15.3 vs. 10.6 mm, p < 0.05). The cured rate was significantly higher in the osteoporotic group (66.3% vs. 33.3%, p < 0.01). Oncologic MRONJ exhibited distinct clinical findings including rapid disease onset, fewer purulent signs, and lower cure rates than osteoporotic MRONJ. Radiological features such as sequestrum size on CT scan, and MCI values on panoramic radiographs, may aid in differentiating MRONJ in osteoporotic and oncologic patients.
Subject(s)
Bisphosphonate-Associated Osteonecrosis of the Jaw , Bone Density Conservation Agents , Osteomyelitis , Osteoporosis , Humans , Bisphosphonate-Associated Osteonecrosis of the Jaw/diagnostic imaging , Bisphosphonate-Associated Osteonecrosis of the Jaw/etiology , Bone Density Conservation Agents/adverse effects , Osteoporosis/diagnostic imaging , Osteoporosis/drug therapy , Osteoporosis/chemically induced , Tomography, X-Ray Computed , Diphosphonates/adverse effectsABSTRACT
OBJECTIVES: This study aimed to develop a robust and accurate deep learning network for detecting the posterior superior alveolar artery (PSAA) in dental cone-beam CT (CBCT) images, focusing on the precise localization of the centre pixel as a critical centreline pixel. METHODS: PSAA locations were manually labelled on dental CBCT data from 150 subjects. The left maxillary sinus images were horizontally flipped. In total, 300 datasets were created. Six different deep learning networks were trained, including 3D U-Net, deeply supervised 3D U-Net (3D U-Net DS), multi-scale deeply supervised 3D U-Net (3D U-Net MSDS), 3D Attention U-Net, 3D V-Net, and 3D Dense U-Net. The performance evaluation involved predicting the centre pixel of the PSAA. This was assessed using mean absolute error (MAE), mean radial error (MRE), and successful detection rate (SDR). RESULTS: The 3D U-Net MSDS achieved the best prediction performance among the tested networks, with an MAE measurement of 0.696 ± 1.552 mm and MRE of 1.101 ± 2.270 mm. In comparison, the 3D U-Net showed the lowest performance. The 3D U-Net MSDS demonstrated a SDR of 95% within a 2 mm MAE. This was a significantly higher result than other networks that achieved a detection rate of over 80%. CONCLUSIONS: This study presents a robust deep learning network for accurate PSAA detection in dental CBCT images, emphasizing precise centre pixel localization. The method achieves high accuracy in locating small vessels, such as the PSAA, and has the potential to enhance detection accuracy and efficiency, thus impacting oral and maxillofacial surgery planning and decision-making.
Subject(s)
Arteries , Cone-Beam Computed Tomography , Humans , Cone-Beam Computed Tomography/methods , Maxillary Sinus , Image Processing, Computer-Assisted/methodsABSTRACT
OBJECTIVES: This study aimed to develop an evidence-based clinical imaging guideline for teeth suspected with vertical root fractures. METHODS: An adaptation methodology based on the Korean Clinical Imaging Guidelines (K-CIG) was used in the guideline development process. After searching for guidelines using major databases such as Ovid-Medline, Elsevier-Embase, National Guideline Clearinghouse, and Guideline International Network, as well as domestic databases such as KoreaMed, KMbase, and KoMGI, two reviewers analyzed the retrieved articles. The retrieved articles were included in this review using well-established inclusion criteria. RESULTS: Twenty articles were identified through an online search, of which three were selected for guideline development. Based on these three guidelines, this study developed specific recommendations concerning the optimal imaging modality for diagnosing teeth suspected of vertical root fractures. CONCLUSIONS: Periapical radiography is the preferred method for assessing teeth with mastication-related pain and suspected vertical root fractures. However, if intraoral radiographs do not provide sufficient information about root fractures, a small FOV CBCT may be considered. However, the use of CBCT in endodontically treated teeth is significantly constrained by the presence of artificial shading.
ABSTRACT
This study assessed AI-processed low-dose cone-beam computed tomography (CBCT) images for single-tooth diagnosis. Human-equivalent phantoms were used to evaluate CBCT image quality with a focus on the right mandibular first molar. Two CBCT machines were used for evaluation. The first CBCT machine was used for the experimental group, in which images were acquired using four protocols and enhanced with AI processing to improve quality. The other machine was used for the control group, where images were taken in one protocol without AI processing. The dose-area product (DAP) was measured for each protocol. Subjective clinical image quality was assessed twice by five dentists, with a 2-month interval in between, using 11 parameters and a six-point rating scale. Agreement and statistical significance were assessed with Fleiss' kappa coefficient and intra-class correlation coefficient. The AI-processed protocols exhibited lower DAP/field of view values than non-processed protocols, while demonstrating subjective clinical evaluation results comparable to those of non-processed protocols. The Fleiss' kappa coefficient value revealed statistical significance and substantial agreement. The intra-class correlation coefficient showed statistical significance and almost perfect agreement. These findings highlight the importance of minimizing radiation exposure while maintaining diagnostic quality as the usage of CBCT increases in single-tooth diagnosis.
ABSTRACT
Malignant melanoma of the parotid gland is an unusual tumor in the head and neck region, and most parotid melanoma is reported as a metastatic lesion of cutaneous malignant melanoma. We report a case of primary malignant melanoma arising in the parotid gland duct with diagnostic challenge. The patient was a 68-year-old man who complained of repeated right facial swelling that presented 3 months prior. Swelling was detected along the Stensen's duct of the cheek, and brown-colored saliva-like fluid was aspirated. On MR and CT images, a fluid-filled duct with small nodule and heterogeneously enhancing mass in the parotid parenchyma was detected. The nodular mass on the ductal wall grew rapidly, and the hyperintense T1 signal became significant on follow-up images. The final diagnosis via histopathologic examination using biopsy and parotidectomy specimen revealed the lesion as malignant melanoma of the duct and pleomorphic adenoma of the parenchyma. Even if the incidence of primary malignant melanoma is very low among tumors occurring in the parotid gland, efforts supporting an early diagnosis using imaging characteristics are important.
ABSTRACT
Stroke is one of the major causes of death worldwide, and is closely associated with atherosclerosis of the carotid artery. Panoramic radiographs (PRs) are routinely used in dental practice, and can be used to visualize carotid artery calcification (CAC). The purpose of this study was to automatically and robustly classify and segment CACs with large variations in size, shape, and location, and those overlapping with anatomical structures based on deep learning analysis of PRs. We developed a cascaded deep learning network (CACSNet) consisting of classification and segmentation networks for CACs on PRs. This network was trained on ground truth data accurately determined with reference to CT images using the Tversky loss function with optimized weights by balancing between precision and recall. CACSNet with EfficientNet-B4 achieved an AUC of 0.996, accuracy of 0.985, sensitivity of 0.980, and specificity of 0.988 in classification for normal or abnormal PRs. Segmentation performances for CAC lesions were 0.595 for the Jaccard index, 0.722 for the Dice similarity coefficient, 0.749 for precision, and 0.756 for recall. Our network demonstrated superior classification performance to previous methods based on PRs, and had comparable segmentation performance to studies based on other imaging modalities. Therefore, CACSNet can be used for robust classification and segmentation of CAC lesions that are morphologically variable and overlap with surrounding structures over the entire posterior inferior region of the mandibular angle on PRs.
Subject(s)
Carotid Arteries , Deep Learning , Radiography, Panoramic , Vascular Calcification , Humans , Radiography, Panoramic/methods , Carotid Arteries/diagnostic imaging , Carotid Arteries/pathology , Vascular Calcification/diagnostic imaging , Carotid Artery Diseases/diagnostic imaging , Female , Male , Aged , Middle Aged , Tomography, X-Ray Computed/methodsABSTRACT
OBJECTIVES: The purpose of this study is to investigate the morphological changes that occur when mesiodens is located within the nasopalatine canal, as well as clinical characteristics. METHODS: Clinical records and CT images of patients who had mesiodens in the nasopalatine canal were retrospectively analysed. In addition to demographic information, clinical symptoms and complications associated with extraction of mesiodens were recorded. Using CT images, number, location, size, and tooth morphology were evaluated. RESULTS: This study included 32 patients and 38 mesiodens within the nasopalatine canal. Supernumerary teeth exhibited a characteristic feature of thin and elongated shape in the canal (narrow width and elongation were observed in 96.6% and 53.3% of the patients, respectively). Fusion was found in 4 patients and dilaceration in 12. A complication occurred in 2 patients, which was tooth remnant, not a neurologic complication. Only 5 mesiodens could be detected in the nasopalatine canal on panoramic images. CONCLUSIONS: Morphological abnormalities in mesiodens within the nasopalatine canal were frequently detected, and these could be effectively diagnosed through 3D imaging analysis.
Subject(s)
Tooth, Supernumerary , Humans , Tooth, Supernumerary/diagnostic imaging , Cone-Beam Computed Tomography , Retrospective Studies , Radiography , Imaging, Three-Dimensional , MaxillaABSTRACT
OBJECTIVE: The aim of this study was to evaluate a deep convolutional neural network (DCNN) method for the detection and classification of nasopalatine duct cysts (NPDC) and periapical cysts (PAC) on panoramic radiographs. STUDY DESIGN: A total of 1,209 panoramic radiographs with 606 NPDC and 603 PAC were labeled with a bounding box and divided into training, validation, and test sets with an 8:1:1 ratio. The networks used were EfficientDet-D3, Faster R-CNN, YOLO v5, RetinaNet, and SSD. Mean average precision (mAP) was used to assess performance. Sixty images with no lesion in the anterior maxilla were added to the previous test set and were tested on 2 dentists with no training in radiology (GP) and on EfficientDet-D3. The performances were comparatively examined. RESULTS: The mAP for each DCNN was EfficientDet-D3 93.8%, Faster R-CNN 90.8%, YOLO v5 89.5%, RetinaNet 79.4%, and SSD 60.9%. The classification performance of EfficientDet-D3 was higher than that of the GPs' with accuracy, sensitivity, specificity, positive predictive value, and negative predictive value of 94.4%, 94.4%, 97.2%, 94.6%, and 97.2%, respectively. CONCLUSIONS: The proposed method achieved high performance for the detection and classification of NPDC and PAC compared with the GPs and presented promising prospects for clinical application.
Subject(s)
Neural Networks, Computer , Radicular Cyst , Radiography, Panoramic , Humans , Radicular Cyst/diagnostic imaging , Radiographic Image Interpretation, Computer-Assisted/methodsABSTRACT
Purpose: The objective of this study was to propose a deep-learning model for the detection of the mandibular canal on dental panoramic radiographs. Materials and Methods: A total of 2,100 panoramic radiographs (PANs) were collected from 3 different machines: RAYSCAN Alpha (n=700, PAN A), OP-100 (n=700, PAN B), and CS8100 (n=700, PAN C). Initially, an oral and maxillofacial radiologist coarsely annotated the mandibular canals. For deep learning analysis, convolutional neural networks (CNNs) utilizing U-Net architecture were employed for automated canal segmentation. Seven independent networks were trained using training sets representing all possible combinations of the 3 groups. These networks were then assessed using a hold-out test dataset. Results: Among the 7 networks evaluated, the network trained with all 3 available groups achieved an average precision of 90.6%, a recall of 87.4%, and a Dice similarity coefficient (DSC) of 88.9%. The 3 networks trained using each of the 3 possible 2-group combinations also demonstrated reliable performance for mandibular canal segmentation, as follows: 1) PAN A and B exhibited a mean DSC of 87.9%, 2) PAN A and C displayed a mean DSC of 87.8%, and 3) PAN B and C demonstrated a mean DSC of 88.4%. Conclusion: This multi-device study indicated that the examined CNN-based deep learning approach can achieve excellent canal segmentation performance, with a DSC exceeding 88%. Furthermore, the study highlighted the importance of considering the characteristics of panoramic radiographs when developing a robust deep-learning network, rather than depending solely on the size of the dataset.