Deliberating a Sustainable Welfare-Work Nexus.

Very few countries have managed to decouple economic growth from resource use and greenhouse gas emissions in absolute terms and at rates to meet the climate targets of the Paris Agreement. To achieve this, technological solutions would need to be combined with sufficiency-oriented policies in a postgrowth context. This paper develops policy ideas for a sustainable welfare-work nexus via citizen engagement and examines the level of democratic support for such ideas. Theoretically, it employs "sustainable welfare" to understand welfare and wellbeing within planetary and social limits. The paper first sketches the welfare-work nexus as developed in the postwar circumstances in Western Europe, highlighting that this model was at no point in time ecologically generalizable to the rest of the world, and then briefly reviews the existing debate on sustainable welfare. The empirical analyses start with qualitative data from 11 deliberative forums on sustainable needs satisfaction, with emphasis on policies targeted at respecting the upper and lower boundaries of a "safe and just operating space" for economic and social development. The qualitative data are then triangulated with quantitative data from a representative survey, which was constructed based on the policy suggestions from the forums, hence allowing for an exploration of their popularity in the Swedish population as a whole. We find a considerable gap between the far-reaching policy measures that forum participants consider necessary and the measures that the general public in Sweden are prepared to support, especially when it comes to policies targeting maximum levels of needs satisfaction.

Dual In Situ Laser Techniques Underpin the Role of Cations in Impacting Electrocatalysts.

Understanding the electrode/electrolyte interface is crucial for optimizing electrocatalytic performances. Here, we demonstrate that the nature of alkali metal cations can profoundly impact the oxygen evolution activity of surface-mounted metal-organic framework (SURMOF) derived electrocatalysts, which are based on NiFe(OOH). In situ Raman spectroscopy results show that Raman shifts of the Ni-O bending vibration are inversely proportional to the mass activities from Cs+ to Li+ . Particularly, a laser-induced current transient technique was introduced to study the cation-dependent electric double layer properties and their effects on the activity. The catalytic trend appeared to be closely related to the potential of maximum entropy of the system, suggesting a strong cation impact on the interfacial water layer structure. Our results highlight how the electrolyte composition can be used to maximize the performance of SURMOF derivatives toward electrochemical water splitting.

Habitus and climate change: Exploring support and resistance to sustainable welfare and social-ecological transformations in Sweden.

We explore peoples' dispositions and practices with regard to social-ecological transformations based on a sustainable welfare policy strategy in Sweden. We draw on Bourdieu's concept of habitus to highlight the relations between social positions, dispositions, and position-takings. Using data from an own survey, we identify habitus types and place these in the space of social positions. We apply principal component analysis to a large set of questions about social, ecological, and climate change related topics and identify eight underlying eco-social dispositions. These are used for cluster analyses that find typical constellations of eco-social dispositions within the Swedish population: variants of eco-social habitus. We find seven habitus types and describe their social characteristics, political preferences, and practices. Finally, the seven habitus are plotted onto the map of social positions, the Bourdieusian social space, highlighting their relations-proximities, tensions, and contestations-to each other. We find evidence that political struggles around social-ecological transformations reproduce existing social structures but are also connected to new "eco-social" divisions that appear between groups in similar positions. In the conclusion we discuss the implications for social-ecological transformations based on sustainable welfare.

Pressure and tension waves from bubble collapse near a solid boundary: A numerical approach.

The acoustic waves being generated during the motion of a bubble in water near a solid boundary are calculated numerically. The open source package OpenFOAM is used for solving the Navier-Stokes equation and extended to include nonlinear acoustic wave effects via the Tait equation for water. A bubble model with a small amount of gas is chosen, the gas obeying an adiabatic law. A bubble starting from a small size with high internal pressure near a flat, solid boundary is studied. The sequence of events from bubble growth via axial microjet formation, jet impact, annular nanojet formation, torus-bubble collapse, and bubble rebound to second collapse is described. The different pressure and tension waves with their propagation properties are demonstrated.

Jetting bubbles observed by x-ray holography at a free-electron laser: internal structure and the effect of non-axisymmetric boundary conditions.

In this work, we study the jetting dynamics of individual cavitation bubbles using x-ray holographic imaging and high-speed optical shadowgraphy. The bubbles are induced by a focused infrared laser pulse in water near the surface of a flat, circular glass plate, and later probed with ultrashort x-ray pulses produced by an x-ray free-electron laser (XFEL). The holographic imaging can reveal essential information of the bubble interior that would otherwise not be accessible in the optical regime due to obscuration or diffraction. The influence of asymmetric boundary conditions on the jet's characteristics is analysed for cases where the axial symmetry is perturbed and curved liquid filaments can form inside the cavity. The x-ray images demonstrate that when oblique jets impact the rigid boundary, they produce a non-axisymmetric splash which grows from a moving stagnation point. Additionally, the images reveal the formation of complex gas/liquid structures inside the jetting bubbles that are invisible to standard optical microscopy. The experimental results are analysed with the assistance of full three-dimensional numerical simulations of the Navier-Stokes equations in their compressible formulation, which allow a deeper understanding of the distinctive features observed in the x-ray holographic images. In particular, the effects of varying the dimensionless stand-off distances measured from the initial bubble location to the surface of the solid plate and also to its nearest edge are addressed using both experiments and simulations. A relation between the jet tilting angle and the dimensionless bubble position asymmetry is derived. The present study provides new insights into bubble jetting and demonstrates the potential of x-ray holography for future investigations in this field. Supplementary Information: The online version contains supplementary material available at 10.1007/s00348-023-03759-9.

Rare earths stick to rare cyanobacteria: Future potential for bioremediation and recovery of rare earth elements.

Biosorption of metal ions by phototrophic microorganisms is regarded as a sustainable and alternative method for bioremediation and metal recovery. In this study, 12 cyanobacterial strains, including 7 terrestrial and 5 aquatic cyanobacteria, covering a broad phylogenetic diversity were investigated for their potential application in the enrichment of rare earth elements through biosorption. A screening for the maximum adsorption capacity of cerium, neodymium, terbium, and lanthanum was conducted in which Nostoc sp. 20.02 showed the highest adsorption capacity with 84.2-91.5 mg g-1. Additionally, Synechococcus elongatus UTEX 2973, Calothrix brevissima SAG 34.79, Desmonostoc muscorum 90.03, and Komarekiella sp. 89.12 were promising candidate strains, with maximum adsorption capacities of 69.5-83.4 mg g-1, 68.6-83.5 mg g-1, 44.7-70.6 mg g-1, and 47.2-67.1 mg g-1 respectively. Experiments with cerium on adsorption properties of the five highest metal adsorbing strains displayed fast adsorption kinetics and a strong influence of the pH value on metal uptake, with an optimum at pH 5 to 6. Studies on binding specificity with mixed-metal solutions strongly indicated an ion-exchange mechanism in which Na+, K+, Mg2+, and Ca2+ ions are replaced by other metal cations during the biosorption process. Depending on the cyanobacterial strain, FT-IR analysis indicated the involvement different functional groups like hydroxyl and carboxyl groups during the adsorption process. Overall, the application of cyanobacteria as biosorbent in bioremediation and recovery of rare earth elements is a promising method for the development of an industrial process and has to be further optimized and adjusted regarding metal-containing wastewater and adsorption efficiency by cyanobacterial biomass.

Stripped: contribution of cyanobacterial extracellular polymeric substances to the adsorption of rare earth elements from aqueous solutions.

The transformation of modern industries towards enhanced sustainability is facilitated by green technologies that rely extensively on rare earth elements (REEs) such as cerium (Ce), neodymium (Nd), terbium (Tb), and lanthanum (La). The occurrence of productive mining sites, e.g., is limited, and production is often costly and environmentally harmful. As a consequence of increased utilization, REEs enter our ecosystem as industrial process water or wastewater and become highly diluted. Once diluted, they can hardly be recovered by conventional techniques, but using cyanobacterial biomass in a biosorption-based process is a promising eco-friendly approach. Cyanobacteria can produce extracellular polymeric substances (EPS) that show high affinity to metal cations. However, the adsorption of REEs by EPS has not been part of extensive research. Thus, we evaluated the role of EPS in the biosorption of Ce, Nd, Tb, and La for three terrestrial, heterocystous cyanobacterial strains. We cultivated them under N-limited and non-limited conditions and extracted their EPS for compositional analyses. Subsequently, we investigated the metal uptake of a) the extracted EPS, b) the biomass extracted from EPS, and c) the intact biomass with EPS by comparing the amount of sorbed REEs. Maximum adsorption capacities for the tested REEs of extracted EPS were 123.9-138.2 mg g-1 for Komarekiella sp. 89.12, 133.1-137.4 mg g-1 for Desmonostoc muscorum 90.03, and 103.5-129.3 mg g-1 for Nostoc sp. 20.02. A comparison of extracted biomass with intact biomass showed that 16% (Komarekiella sp. 89.12), 28% (Desmonostoc muscorum 90.03), and 41% (Nostoc sp. 20.02) of REE adsorption was due to the biosorption of the extracellular EPS. The glucose- rich EPS (15%-43% relative concentration) of all three strains grown under nitrogen-limited conditions showed significantly higher biosorption rates for all REEs. We also found a significantly higher maximum adsorption capacity of all REEs for the extracted EPS compared to cells without EPS and untreated biomass, highlighting the important role of the EPS as a binding site for REEs in the biosorption process. EPS from cyanobacteria could thus be used as efficient biosorbents in future applications for REE recycling, e.g., industrial process water and wastewater streams.

Metamorphosis of Heterostructured Surface-Mounted Metal-Organic Frameworks Yielding Record Oxygen Evolution Mass Activities.

Materials derived from surface-mounted metal-organic frameworks (SURMOFs) are promising electrocatalysts for the oxygen evolution reaction (OER). A series of mixed-metal, heterostructured SURMOFs is fabricated by the facile layer-by-layer deposition method. The obtained materials reveal record-high electrocatalyst mass activities of ≈2.90 kA g-1 at an overpotential of 300 mV in 0.1 m KOH, superior to the benchmarking precious and nonprecious metal electrocatalysts. This property is assigned to the particular in situ self-reconstruction and self-activation of the SURMOFs during the immersion and the electrochemical treatment in alkaline aqueous electrolytes, which allows for the generation of NiFe (oxy)hydroxide electrocatalyst materials of specific morphology and microstructure.