A Novel Ferroelectric Rashba Semiconductor.

Fast, reversible, and low-power manipulation of the spin texture is crucial for next generation spintronic devices like non-volatile bipolar memories, switchable spin current injectors or spin field effect transistors. Ferroelectric Rashba semiconductors (FERSC) are the ideal class of materials for the realization of such devices. Their ferroelectric character enables an electronic control of the Rashba-type spin texture by means of the reversible and switchable polarization. Yet, only very few materials are established to belong to this class of multifunctional materials. Here, Pb1- xGexTe is unraveled as a novel FERSC system down to nanoscale. The ferroelectric phase transition and concomitant lattice distortion are demonstrated by temperature dependent X-ray diffraction, and their effect on electronic properties are measured by angle-resolved photoemission spectroscopy. In few nanometer-thick epitaxial heterostructures, a large Rashba spin-splitting is exhibiting a wide tuning range as a function of temperature and Ge content. This work defines Pb1- xGexTe as a high-potential FERSC system for spintronic applications.

Late presentation of HIV infection among adults in New Zealand from 2011 to 2020.

OBJECTIVES: Early diagnosis of HIV is essential for successful treatment and controlling HIV spread in a population. We examined the frequency and characteristics of adults diagnosed late with HIV in New Zealand from 2011-2020. METHODS: Routine surveillance data were analysed. Those previously diagnosed overseas or as part of immigration screening, or with missing CD4 count were excluded. 'Late presentation' was defined as a CD4 count <350 cells/µL or an AIDS-defining event. 'Advanced HIV disease' were those with a CD4 count <200 cells/µL or an AIDS-defining event. Relative risks were calculated using Poisson regression. RESULTS: Of 1145 people, 40.5% presented late; 24.9% had advanced HIV disease. Of the 464 late diagnoses, 65.5% occurred among men-who-have-sex-with-men (MSM), 26.1% among heterosexuals, 8.4% among others. Heterosexual men and women were more likely to present late (55.3%) compared to MSM (35.6%). Amongst MSM, those who were older, of an ethnicity other than European, acquired HIV overseas, tested because symptomatic, or had their last negative test >2 years prior were more likely to present late and have advanced disease. Amongst heterosexuals, older age, tested because symptomatic, and Pacific ethnicity were associated with late presentation, and Maori, Pacific and Asian people were more likely to have advanced disease. CONCLUSIONS: There continues to be a high proportion of people diagnosed late with HIV. Identifying barriers for testing, missed opportunities for screenings and other factors that delay HIV diagnosis could help develop effective strategies to reduce this burden of late presentation - particularly among heterosexual individuals, non-Europeans, and older people.

Development of a Layer Made of Natural Fibers to Improve the Ecological Performance of the Face Mask Type II.

The aim of this study was to develop a natural nonwoven layer made of cottonized bleached flax and cotton fibers which is suitable to replace one of the three polypropylene layers of face mask type II in order to reduce non-biodegradable waste production and limit the negative impact of used masks on the environment. The work focused on the design of a nonwoven structure based on properly blending cotton and flax fibers as well as ensuring the cover factor, which can support the mask's barrier properties against air dust particles and does not make breathing difficult. Additionally, a biodegradable film was developed to connect the nonwoven layer with the other polypropylene filtering layers. The effectiveness of the biodeterioration of the flax/cotton nonwoven was evaluated based on a test of the susceptibility of materials to the action of soil microorganisms. The flax/cotton nonwoven layer was tested in terms of mechanical, physical, and biophysical properties, and an analysis of the covering of the nonwoven surface with fibers was conducted as well. The results confirmed that the structure of flax/cotton nonwovens is suitable to replace the nondegradable polypropylene layer of the face mask type II to improve its environmental performance.

An 18-Month Analysis of Bond Strength of Hot-Dip Galvanized Reinforcing Steel B500SP and S235JR+AR to Chloride Contaminated Concrete.

This article describes the comparative analysis of tests on bond strength of hot-dip galvanized and black steel to concrete with and without chlorides. The bond effect was evaluated with six research methods: strength, electrochemical (measurements of potential, EIS and LPR), optical, and 3D scanning. The tests were conducted within a long period of 18 months on 48 test elements reinforced with smooth rebars ϕ8 mm from steel grade S235JR+AR and ribbed rebars ϕ8 mm and ϕ16 mm from steel grade B500SP. The main strength tests on the reinforcement bond to concrete were used to compare forces pulling out galvanized and black steel rebars from concrete. This comparative analysis was performed after 28, 180, and 540 days from the preparation of the elements. The electrochemical tests were performed to evaluate corrosion of steel rebars in concrete, particularly in chloride contaminated concrete. The behaviour of concrete elements while pulling out the rebar was observed using the system of digital cameras during the optical tests. As regards 3D scanning of ribbed rebars ϕ8 mm and ϕ16 mm, this method allowed the detailed identification of their complex geometry in terms of determining the polarization area to evaluate the corrosion rate of reinforcement in concrete. The test results indicated that the presence of zinc coating on rebars had an impact on the parameters of anchorage. In the case of ribbed rebars of 16 mm in diameter, the maximum values of adhesive stress and bond stiffness were reduced over time when compared to black steel rebars. Moreover, it was noticed that the stiffness of rebar anchorage in chloride contaminated concrete was considerably higher than in concrete without chlorides.

A Two-Year Evaluation of Corrosion-Induced Damage to Hot Galvanized Reinforcing Steel B500SP in Chloride Contaminated Concrete.

Corrosion-induced damage to concrete reinforced with bars is a serious problem regarding technical and economic aspects and strongly depends on used materials, corrosion environment, and service life. Tests described in this paper refer to a two-year evaluation of the effectiveness of protection provided by zinc-coated low-carbon reinforcing steel of grade B500SP in concrete against chloride corrosion. Performed tests were comparative and included measurements conducted on four groups of concrete test elements with dimensions of 40 mm × 40 mm × 140 mm reinforced with a bar having a diameter of ϕ8 mm. Particular groups were a combination of different types of concrete with or without chloride additives, with galvanized or black steel. Chlorides as CaCl2 were added to the concrete mix in the amount of 3% of cement weight in concrete. Reinforced concrete specimens were periodically monitored within two years using the following techniques: linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS). Polarization measurements were conducted in a three-electrode arrangement, in which a rebar in concrete served as a working electrode, stainless steel sheet was used as an auxiliary electrode, and Cl-/AgCl,Ag was a reference electrode. Comparative tests of changes in the density of corrosion current in concrete specimens without chloride additives basically demonstrated no development of corrosion, and possible passivation was expected in case of black steel. Higher densities of corrosion current were observed for galvanized steel during first days of testing. The reason was the dissolution of zinc after the contact with initially high pH of concrete pore solution. Six-month measurements demonstrated a higher density of corrosion current in concrete specimens with high concentration of chlorides, which unambiguously indicated corrosion in concrete reinforced with galvanized or black steel. Densities of corrosion current determined for selected specimens dramatically decreased after an 18-month interval in measurements. Corrosion was even inhibited on black steel as an insulating barrier of corrosion products was formed. The above observations were confirmed with structural studies using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques. Results obtained from corrosion (LPR, EIS) and structural (SEM, EDS) tests on specimens of concrete reinforced with steel B500SP demonstrated a very favorable impact of zinc coating on steel by providing two-year protection against corrosion in the environment with very high chloride content.

Internal architecture and adsorption sites of Violet Lander molecules assembled on native and KBr-passivated InSb(001) surfaces.

The adsorption of individual Violet Lander molecules self-assembled on the c(8x2) reconstructed InSb(001) surface in its native form and on the surface passivated with one to three monolayers of KBr is investigated by means of low-temperature scanning tunneling microscopy (STM). Preferred adsorption sites of the molecules are found on flat terraces as well as at atomic step edges. For molecules immobilized on flat terraces, several different conformations are identified from STM images acquired with submolecular resolution and are explained by the rotation of the 3,5-di-tert-butylphenyl groups around sigma bonds, which allows adjustment of the molecular geometry to the anisotropic substrate structure. Formation of ordered molecular chains is found at steps running along substrate reconstruction rows, whereas at the steps oriented perpendicularly no intermolecular ordering is recorded. It is also shown that the molecules deposited at two or more monolayers of the epitaxial KBr spacer do not have any stable adsorption sites recorded with STM. Prospects for the manipulation of single molecules by using the STM tip on highly anisotropic substrates are also explored, and demonstrate the feasibility of controlled lateral displacement in all directions.

Fiber-Optic UTC(k) Timescale Distribution With Automated Link Delay Cancelation.

In this paper, we describe the idea and practical realization of an automated calibrator of fiber-optic UTC(k) distribution system, along with a high-resolution shifter of 1 PPS signal, which allows us to cancel the propagation delay and, thus, to produce the 1 PPS at the remote system output with practically zero offset. The solution was experimentally verified with 10 different optical paths, up to 300 km long. The rms offset of the output timescale in our experiments was 7.1 ps, and maximum absolute value did not exceed 15 ps.

ELSTAB-Fiber-Optic Time and Frequency Distribution Technology: A General Characterization and Fundamental Limits.

In this paper, we present an overview of the electronically stabilized (thus named ELSTAB) fiber-optic time and frequency (T&F) distribution system based on our idea of using variable electronic delay lines as compensating elements. Various extensions of the basic system, allowing building a long-haul, multiuser network are described. The fundamental limitations of the method arising from fiber chromatic dispersion and system dynamics are discussed. We briefly characterize the main hardware challenge of the system, which is the design of a pair of low-noise, precisely matched delay lines. Finally, we present experimental results with T&F distribution over up to 615 km of fiber, where we demonstrate frequency stability in the range of 1-7 ×10(-17) for 10(5) s averaging and time calibration with accuracy well below 50 ps. Also, practical implementation of the ELSTAB in the Polish T&F distribution network is shown.

Structure of InSb(001) surface.

The InSb(001) surface has been studied experimentally, using room temperature scanning tunnelling microscopy (RT STM), and theoretically, using ab initio density functional theory (DFT) calculations. RT experimental STM images show bright lines running along the bulk crystal [110] direction. Resolved features between the bright lines whose appearance depends on the applied bias voltage confirm clearly the c(8×2) reconstruction of this surface. Our calculations, which are reported for this surface for the first time, include the reconstructed 4×2 and c(8×2) surfaces, the latter according to the so-called ζ-model proposed previously by Lee et al and Kumpf et al. A 'defective' structure proposed previously by Kumpf et al, which contains an extra In atom within a top bilayer is also considered. In all cases, we obtained stable structures. Calculated STM images for the c(8×2) reconstruction obtained using the Tersoff-Hamann approximation compare extremely well with the experimental ones. We also find that the defect structure may not be clearly visible in the STM images. Finally, a brief discussion is given on the other, although closely related, phase of the same surface observed previously in low temperature (LT) experimental STM images (Goryl et al 2007 Surf. Sci. 601 3605).

Evidence for potassium carbonate crystallites on air-cleaved mica surfaces.

Air-cleaved mica surfaces exhibit a high density of nanometer or micrometer size particles that have been ascribed to potassium carbonate formed as a reaction product of carbonaceous gases with potassium ions. Unambiguous evidence for this assignment has, however, never been presented. We study air-cleaved mica surfaces by high-resolution noncontact atomic force microscopy (NC-AFM) in ultrahigh vacuum to reveal the detailed structure of such precipitates on the surface. Among a large number of irregularly shaped surface structures, we find flat, hexagonally shaped islands exhibiting two different patterns on their surfaces, namely a rectangular atomic corrugation pattern and a hexagonal moire structure. The unit cell of the rectangular pattern corresponds to the dimensions of the potassium carbonate bulk structure and is found on high crystallites. The moire structure solely appears on very flat islands and is caused by the interference of the potassium carbonate lattice periodicity and the lattice periodicity of the underlying mica substrate. Both results strongly point to the presence of potassium carbonate crystallites on air-cleaved mica surfaces.

Nanoscale surface chemistry.

We report evidence in several experiments for nanometer-size effects in surface chemistry. The evidence concerns bimetallic systems, monolayer films of Pt or Pd on W(111) surfaces. Pyramidal facets with [211] faces are formed on annealing on physical monolayer of Pt, Pd on a W(111) substrate, and facet sizes increase with annealing temperature. We used synchrotron radiation-based soft x-ray photoemission to show that monolayer films of Pt, Pd, on W "float" on the outer surface, whereas multilayer films form alloys on annealing. Acetylene reactions over bimetallic planar and faceted Pd/W surfaces exhibit size effects on the nanometer scale, that is, thermal desorption spectra of reactively formed benzene and ethylene (after acetylene adsorption) change systematically with facet size. In the second case, the decomposition of C(2)H(2) over planar and faceted Ir(210) surfaces also exhibits structure sensitivity; temperature programmed desorption of H(2) from C(2)H(2) dissociation depends on the nanoscale surface structure. Finally, we have characterized interactions of Cu with the highly ordered S(4 x 4)/W(111) surface. The substrate is a sulfur-induced nanoscale reconstruction of W(111) with (4 x 4) periodicity, having broad planar terraces (approximately 30 nm in width). Fractional monolayers of vapor-deposited Cu grow as three dimensional clusters on the S(4 x 4) surface over a wide coverage range. At low Cu coverage (< or = 0.1 ML), Cu nanoclusters nucleate preferentially at characteristic 3-fold hollow sites; we find a clear energetic preference for one type of site over others, and evidence for self-limiting growth of nanoclusters.