ABSTRACT
Developing ionic diode membranes featuring asymmetric structures is in high demand for salinity gradient energy harvesting. These membranes offer benefits in mitigating ion concentration polarization, thereby promoting ion permeability. However, most reported works focus on the role of heterogeneous charge-based bipolar ionic diode membranes for ion concentration polarization suppression, with comparatively less attention given to maintaining ion selectivity. Herein, unipolar ionic diode nanofluidic mesoporous silica membranes featuring stepped mesochannels were developed via a micellar sequential oriented interfacial self-assembly strategy as a salinity gradient energy harvester. Due to the asymmetric mesochannels and unipolar structure (both sides carry negative charge), the ionic diode membranes exhibit a strong rectification ratio of â¼15.91 to facilitate unidirectional ion transport while maintaining excellent cation selectivity (cation transfer number of â¼0.85). Besides, the vertically aligned mesochannels significantly reduce ion transport resistance, generating a high ionic flux. Consequently, the unipolar ionic diode nanofluidic membranes demonstrate a power output of 5.88 W/m2 between artificial sea and river water. The unipolar feature gives notable enhancements of 296% and 144% in power output compared to the symmetric membrane and bipolar ionic diode membrane, respectively. This work opens up new routes for designing ionic diode membranes for salinity gradient energy harvesting.
ABSTRACT
Developing an activity detection platform for hyaluronidase (HAase) is crucial for diagnosing and treating cancer. However, traditional detection of HAase is based on changes in the flow rate caused by viscosity or requires complex modifications and processing, which limits the detection accuracy and sensitivity. Herein, hyaluronic acid (HA)-modified mesoporous-based heterochannels (mesoporous carbon-doped γ-Fe2O3 nanoparticles/anodized aluminum oxide, MC-γ-Fe2O3/AAO) featuring ordered 3D transport frameworks and a photothermal property were developed for high performance HAase detection. The HA molecules on the surface of the mesoporous layer provide abundant active sites for HAase detection. An improved ionic current was realized after enzymatic hydrolysis reactions between HA and HAase due to enhanced surface charges and more hydrophilicity, leading to highly sensitive and accurate HAase detection. Notably, the detection performance can be further upgraded with the assistance of the photothermal property of γ-Fe2O3. An amplified detection current signal was achieved owing to a synergistic effect between ion currents and photoresponsive currents. A wide linear detection range from 1 to 50 U/mL and a low detection limit of 0.348 U/mL were obtained, achieving a 2% improvement under illumination. Importantly, the heterochannels have also been successfully applied for HAase detection in fetal bovine serum samples, manifesting considerable application prospects. This work provides a new strategy in constructing photoresponsive nanochannels with a photothermal property for a highly efficient biosensing platform.
ABSTRACT
Heterogeneous membranes play a crucial role in osmotic energy conversion by effectively reducing concentration polarization. However, most heterogeneous membranes mitigate concentration polarization through an asymmetric charge distribution, resulting in compromised ion selectivity. Herein, hetero-nanochannels with asymmetric wettability composed of 2D mesoporous carbon and graphene oxide are constructed. The asymmetric wettability of the membrane endows it with the ability to suppress the concentration polarization without degrading the ion selectivity, as well as achieving a diode-like ion transport feature. As a result, enhanced osmotic energy harvesting is achieved with a power density of 6.41 W m-2 . This represents a substantial enhancement of 102.80-137.85% when compared to homogeneous 2D membranes, surpassing the performance of the majority of reported 2D membranes. Importantly, the membrane can be further used for high-performance ionic power harvesting by regulating ion transport, exceeding previously reported data by 89.1%.
ABSTRACT
Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.
ABSTRACT
Copper ions (Cu2+), as a crucial trace element, play a vital role in living organisms. Thus, the detection of Cu2+ is of great significance for disease prevention and diagnosis. Nanochannel devices with an excellent nanoconfinement effect show great potential in recognizing and detecting Cu2+ ions. However, these devices often require complicated modification and treatment, which not only damages the membrane structure, but also induces nonspecific, low-sensitivity and non-repeatable detection. Herein, a 2D MXene-carboxymethyl chitosan (MXene/CMC) freestanding membrane with ordered lamellar channels was developed by a super-assembly strategy. The introduction of CMC provides abundant space charges, improving the nanoconfinement effect of the nanochannel. Importantly, the CMC can chelate with Cu2+ ions, endowing the MXene/CMC with the ability to detect Cu2+. The formation of CMC-Cu2+ complexes decreases the space charges, leading to a discernible variation in the current signal. Therefore, MXene/CMC can achieve highly sensitive and stable Cu2+ detection based on the characteristics of nanochannel composition. The linear response range for Cu2+ detection is 10-9 to 10-5 M with a low detection limit of 0.095 nM. Notably, MXene/CMC was successfully applied for Cu2+ detection in real water and fetal bovine serum samples. This work provides a simple, highly sensitive and stable detection platform based on the properties of the nanochannel composition.
Subject(s)
Chitosan , Nitrites , Trace Elements , Transition Elements , Copper , Chitosan/chemistry , Ions/chemistryABSTRACT
Bioinspired nanochannel-based sensors have elicited significant interest because of their excellent sensing performance, and robust mechanical and tunable chemical properties. However, the existing designs face limitations due to material constraints, which hamper broader application possibilities. Herein, a heteromembrane system composed of a periodic mesoporous organosilica (PMO) layer with three-dimensional (3D) network nanochannels is constructed for glutathione (GSH) detection. The unique hierarchical pore architecture provides a large surface area, abundant reaction sites and plentiful interconnected pathways for rapid ionic transport, contributing to efficient and sensitive detection. Moreover, the thioether groups in nanochannels can be selectively cleaved by GSH to generate hydrophilic thiol groups. Benefiting from the increased hydrophilic surface, the proposed sensor achieves efficient GSH detection with a detection limit of 1.2 µM by monitoring the transmembrane ionic current and shows good recovery ranges in fetal bovine serum sample detection. This work paves an avenue for designing and fabricating nanofluidic sensing systems for practical and biosensing applications.
Subject(s)
Glutathione , Limit of Detection , Organosilicon Compounds , Glutathione/chemistry , Glutathione/analysis , Glutathione/blood , Porosity , Organosilicon Compounds/chemistry , Animals , Cattle , Biosensing Techniques/methods , Membranes, Artificial , Electrochemical Techniques/methodsABSTRACT
Mass transfer is critical in catalytic processes, especially when the reactions are facilitated by nanostructured catalysts. Strong efforts have been devoted to improving the efficacy and quantity of active sites, but often, mass transfer has not been well studied. Herein, we demonstrate the importance of mass transfer in the electrocatalytic oxygen reduction reaction (ORR) by tailoring the pore sizes. Using a confined-etching strategy, we fabricate boron- and nitrogen-doped carbon (B,N@C) electrocatalysts featuring abundant active sites but different porous structures. The ORR performance of these catalysts is found to correlate with diffusion of the reactant. The optimized B,N@C with trimodal-porous structures feature enhanced O2 diffusion and better activity per heteroatomic site toward the ORR process. This work demonstrates the significance of the nanoarchitecture engineering of catalysts and sheds light on how to optimize structures featuring abundant active sites and enhanced mass transfer.
ABSTRACT
Ion-selective nanochannel membranes assembled from two-dimensional (2D) nanosheets hold immense promise for power conversion using salinity gradient. However, they face challenges stemming from insufficient surface charge density, which impairs both permselectivity and durability. Herein, we present a novel vacancy-engineered, oxygen-deficient NiCo layered double hydroxide (NiCoLDH)/cellulose nanofibers-wrapped carbon nanotubes (VOLDH/CNF-CNT) composite membrane. This membrane, featuring abundant angstrom-scale, cation-selective nanochannels, is designed and fabricated through a synergistic combination of vacancy engineering and interfacial super-assembly. The composite membrane shows interlayer free-spacing of ~3.62â Å, which validates the membrane size exclusion selectivity. This strategy, validated by DFT calculations and experimental data, improves hydrophilicity and surface charge density, leading to the strong interaction with K+ ions to benefit the low ion transport resistance and exceptional charge selectivity. When employed in an artificial river water|seawater salinity gradient power generator, it delivers a high-power density of 5.35â W/m2 with long-term durability (20,000s), which is almost 400 % higher than that of the pristine NiCoLDH membrane. Furthermore, it displays both pH- and temperature-sensitive ion transport behavior, offering additional opportunities for optimization. This work establishes a basis for high-performance salinity gradient power conversion and underscores the potential of vacancy engineering and super-assembly in customizing 2D nanomaterials for diverse advanced nanofluidic energy devices.
ABSTRACT
Photo-regulated nanofluidic devices have attracted great attention in recent years due to their adjustable ion transport in real time. However, most of the photo-responsive nanofluidic devices can only adjust the ionic current unidirectionally, and cannot simultaneously increase or decrease the current signal intelligently by one device. Herein, a mesoporous carbon-titania/ anodized aluminum hetero-channels (MCT/AAO) is constructed by super-assembly strategy, which exhibits dual-function of cation selectivity and photo response. The polymer and TiO2 nanocrystals jointly build the MCT framework. Polymer framework with abundant negatively charged sites endows MCT/AAO with excellent cation selectivity, and TiO2 nanocrystals are responsible for the photo-regulated ion transport. High photo current densities of 1.8 mA m-2 (increase) and 1.2 mA m-2 (decrease) are realized by MCT/AAO benefiting from the ordered hetero-channels. Significantly, MCT/AAO can also achieve the bidirectionally adjustable osmotic energy by alternating the configurations of concentration gradient. Theoretical and experimental results reveal that the superior photo-generated potential is responsible for the bidirectionally adjustable ion transport. Consequently, MCT/AAO performs the function of harvesting ionic energy from the equilibrium electrolyte solution, which greatly expands its practical application field. This work provides a new strategy in constructing dual-functional hetero-channels toward bidirectionally photo-regulated ionic transport and energy harvesting.
ABSTRACT
Engineering 2D nanosheets with well-defined porous structures and their assembled heterostructure membrane is a promising method to improve osmotic energy conversion. However, it is still a great challenge to directly fabricate 2D nanosheets with regular parallel nanochannels in aqueous media. Here, the desired functional nanosheets and heterostructure membrane device are successfully prepared through a simple interfacial assembly strategy. In this method, monolayer cylindrical monomicelles closely arrange and assemble on the surfaces of graphene oxide, and the resulting nanosheets with monolayered aligned nanowire polymer arrays parallel to the substrate surfaces are then obtained. Subsequently, a heterostructured membrane is constructed by assembling these 2D nanosheets on macroporous alumina. The nanofluidic membrane device with asymmetric geometry and charge polarity exhibits smart ion transport properties, and the output osmotic power density is ≈1.22 and 1.63 times over the reported pure 2D graphene oxide and biomass-derived membranes, respectively. In addition, theoretical calculations are carried out to reveal the mechanisms for ion selectivity and salinity gradient energy conversion. This monolayered interfacial assembly approach can open up new avenues for the synthesis of functional porous low-dimensional nanomaterials and membrane devices, and expand the palette of materials selection for many applications.
ABSTRACT
Inspired by natural mobile microorganisms, researchers have developed micro/nanomotors (MNMs) that can autonomously move by transducing different kinds of energies into kinetic energy. The rapid development of MNMs has created tremendous opportunities for biomedical fields including diagnostics, therapeutics, and theranostics. Although the great progress has been made in MNM research, at a fundamental level, the accepted propulsion mechanisms are still a controversial matter. In practical applications such as precision nanomedicine, the precise control of the motion, including the speed and directionality, of MNMs is also important, which makes advanced motion manipulation desirable. Very recently, diverse MNMs with different propulsion strategies, morphologies, sizes, porosities and chemical structures have been fabricated and applied for various uses. Herein, we thoroughly summarize the physical principles behind propulsion strategies, as well as the recent advances in motion manipulation methods and relevant biomedical applications of these MNMs. The current challenges in MNM research are also discussed. We hope this review can provide a bird's eye overview of the MNM research and inspire researchers to create novel and more powerful MNMs.
Subject(s)
Nanostructures , Nanotechnology , Nanostructures/chemistry , Nanomedicine , MotionABSTRACT
Atomically dispersed catalysts are a new type of material in the field of catalysis science, yet their large-scale synthesis under mild conditions remains challenging. Here, a general synergistic capture-bonding superassembly strategy to obtain atomically dispersed Pt (Ru, Au, Pd, Ir, and Rh)-based catalysts on micropore-vacancy frameworks at a mild temperature of 60 °C is reported. The precise capture via narrow pores and the stable bonding of vacancies not only simplify the synthesis process of atomically dispersed catalysts but also realize their large-scale preparation at mild temperature. The prepared atomically dispersed Pt-based catalyst possesses a promising electrocatalytic activity for hydrogen evolution, showing an activity (at overpotential of 50 mV) about 21.4 and 20.8 times higher than that of commercial Pt/C catalyst in 1.0 M KOH and 0.5 M H2SO4, respectively. Besides, the extremely long operational stability of more than 100 h provides more potential for its practical application.
ABSTRACT
BACKGROUND: Dipeptidyl peptidase-IV (DPP-IV), α-glucosidase, and α-amylase play a prominent role in regulating postprandial blood sugar levels, which are regarded as key targets for the treatment of type 2 diabetes mellitus (T2DM). The present study aimed to characterize bioactive compounds as potent crucial sugar metabolism enzyme inhibitors from sugarcane leaves by virtual screening. In total, 41 sugarcane leaf-derived compounds were used for the screening of multiple targets. Subsequently, the molecular mechanism and activity validation in vitro of the interaction between enzymes and compound were carried out. RESULTS: Flavonoid compound schaftoside was identified by molecular simulation and showed significant DPP-IV (0.1050 ± 1.22 mmol L-1 ), α-glucosidase (0.078 ± 0.06 mmol L-1 ), and α-amylase (0.3067 ± 0.35 mmol L-1 ) inhibitory effects. The residues ARG125 and TYR662 of DPP-IV may play crucial roles in inhibiting the activity of DPP-IV. Multiple hydrogen bonds and electrostatic interactions were exhibited between schaftoside and α-glucosidase. Molecular modeling revealed that schaftoside displays strong binding with the catalytic triad (ASP197, ASP300, and GLU233) of α-amylase. CONCLUSION: Our findings demonstrate that schaftoside from sugarcane leaves might be an edible for T2DM treatment." © 2023 Society of Chemical Industry.
Subject(s)
Diabetes Mellitus, Type 2 , Dipeptidyl-Peptidase IV Inhibitors , Saccharum , Humans , Hypoglycemic Agents/pharmacology , Hypoglycemic Agents/chemistry , alpha-Glucosidases/chemistry , Dipeptidyl-Peptidase IV Inhibitors/pharmacology , Dipeptidyl-Peptidase IV Inhibitors/chemistry , Molecular Docking Simulation , Diabetes Mellitus, Type 2/drug therapy , Saccharum/metabolism , Dipeptidyl Peptidase 4/chemistry , alpha-Amylases/chemistry , Plant Leaves/metabolism , Glycoside Hydrolase Inhibitors/chemistryABSTRACT
In the context of sustainable development, chirality, especially chiral drugs, has attracted great interest in the pharmaceutical industry, yet the smart and sensitive separation of enantiomers still presents a major scientific challenge. Herein, inspired by supramolecular templating via chiral transcription nanoparticles, an artificial chiral nanochannel membrane with asymmetric structure, porosity, and abundant chiral surface is fabricated for smart and sensitive enantiomer recognition and separation. Constructed from chiral transcript mesoporous silica (CMS) super-assembled on a porous anode alumina oxide (AAO) support, the obtained heterostructured chiral membrane (CMS/AAO) exhibits enhanced enantioseparation (approximately 170% compared to the supramolecular-templated nanoparticles) among a series of amino acids with various isoelectric points (PIs). Especially for amino acids with a PI greater than 7, the couple-accelerated enantioseparation (CAE) can be achieved for the first time. Further analysis using an osmotic energy conversion test and simulations based on the Poisson-Nernst-Planck (PNP) equations confirm that the heterostructure and charge polarity are the key to achieve chiral amino acids and ion separation. We expect this work will inspire the development of multifunctional membrane systems for more sustainable and energy-efficient enantioseparation.
Subject(s)
Nanoparticles , Silicon Dioxide , Amino Acids , Porosity , Silicon Dioxide/chemistry , StereoisomerismABSTRACT
The rational design and controllable synthesis of hollow nanoparticles with both a mesoporous shell and an asymmetric architecture are crucially desired yet still significant challenges. In this work, a kinetics-controlled interfacial super-assembly strategy is developed, which is capable of preparing asymmetric porous and hollow carbon (APHC) nanoparticles through the precise regulation of polymerization and assembly rates of two kinds of precursors. In this method, Janus resin and silica hybrid (RSH) nanoparticles are first fabricated through the kinetics-controlled competitive nucleation and assembly of two precursors. Specifically, silica nanoparticles are initially formed, and the resin nanoparticles are subsequently formed on one side of the silica nanoparticles, followed by the co-assembly of silica and resin on the other side of the silica nanoparticles. The APHC nanoparticles are finally obtained via high-temperature carbonization of RSH nanoparticles and elimination of silica. The erratic asymmetrical, hierarchical porous and hollow structure and excellent photothermal performance under 980 nm near-infrared (NIR) light endow the APHC nanoparticles with the ability to serve as fuel-free nanomotors with NIR-light-driven propulsion. Upon illumination by NIR light, the photothermal effect of the APHC shell causes both self-thermophoresis and jet driving forces, which propel the APHC nanomotor. Furthermore, with the assistance of phase change materials, such APHC nanoparticles can be employed as smart vehicles that can achieve on-demand release of drugs with a 980 nm NIR laser. As a proof of concept, we apply this APHC-based therapeutic system in cancer treatment, which shows improved anticancer performance due to the synergy of photothermal therapy and chemotherapy. In brief, this kinetics-controlled approach may put forward new insight into the design and synthesis of functional materials with unique structures, properties, and applications by adjusting the assembly rates of multiple precursors in a reaction system.
ABSTRACT
Meticulous surface patterning of nanoparticles with anisotropic patches as analogs of functional groups offers fascinating potential in many fields, particularly in controllable materials assembly. However, patchy colloids generally evolve into high-symmetry solid structures, mainly because the assembly interactions arise between patches via patch-to-patch recognition. Here, we report an assembly concept, that is, a soft patch, which enables selective and directional fusion of liquid droplets for producing highly asymmetrical hollow nanospacecrafts. Our approach enables precise control of hollow nanoparticle diameters by manipulating droplet fusion regions. By controlling the patch number, more orientations are accessible to droplet fusion, allowing for increased degrees of complexity of hollow self-assemblies. The versatility and curvature-selective growth of this strategy are demonstrated on three nonspherical nanoparticles, enabling the creation of highly asymmetric nanospacecrafts. By patterning Au-core Ag-shell nanorods, the nanospacecraft can be programmed in response to either H2O2 or near-infrared light, exhibiting dual-mode response behavior with a 208% increase in the diffusion coefficient in both modes compared with other nanoscale low-asymmetry active materials. Overall, these findings are a significant step toward designing new patch interactions for materials self-assembly for creating complex hollow colloids and functional nanodevices that are otherwise inaccessible.
Subject(s)
Nanoparticles , Nanotubes , Anisotropy , Colloids/chemistry , Hydrogen Peroxide , Nanotubes/chemistryABSTRACT
Tyrosinase (TYR) is a multifunctional copper-containing enzyme that plays a critical role in the biosynthetic pathway of melanin. Thus, the detection of TYR activity possesses vast importance from clinical diagnosis to the food industry. However, most TYR detection methods are expensive, complicated, and time-consuming. Herein, a functional nanofluidic heterochannel composed of an ultrathin tyramine-modified mesoporous silica layer (Tyr-MS) and alumina oxide (AAO) arrays is constructed by an interfacial super-assembly method. The heterochannel with plenty of enzyme catalytic sites for TYR provides the response of the ion current signal against TYR concentrations. Introducing enzymatic reaction paves the way for the heterochannel to achieve label-free, selective, specific detection of TYR. Notably, a highly sensitive detection of TYR with a limit of 2 U mL-1 was obtained by optimizing the modified conditions. Detailed investigations and theoretical calculations further reveal the mechanism for the detection performance. This work provides a simple, low-cost, quick response, and label-free platform based on functional nanofluidic devices for enzyme-sensing technologies.
Subject(s)
Monophenol Monooxygenase , Oxides , Aluminum Oxide , Monophenol Monooxygenase/metabolism , Silicon Dioxide , TyramineABSTRACT
The successful integration of well-designed micro-nanomotors (MNMs) with diverse functional systems, such as, living systems, remote actuation systems, intelligent sensors, and sensing systems, offers many opportunities to not only endow them with diverse functionalization interfaces but also bring augmented or new properties in a wide variety of applications. Core-shell structured MNM systems have been considered to play an important role in a wide range of applications as they provide a platform to integrate multiple complementary components via decoration, encapsulation, or functionalization into a single functional system, being able to protect the active species from harsh environments, and bring improved propulsion performance, stability, non-toxicity, multi-functionality, and dispersibility, etc., which are not easily available from the isolated components. More importantly, the hetero-interfaces between individual components within a core-shell structure might give rise to boosted or new physiochemical properties. This review will bring together these key aspects of the core-shell structured MNMs, ranging from advanced protocols, enhanced/novel functionalities arising from diverse functional shells, to integrated core-shell structured MNMs for diverse applications. Finally, current challenges and future perspectives for the development of core-shell structured MNMs are discussed in term of synthesis, functions, propulsions, and applications.
Subject(s)
Nanostructures , Nanotechnology , Nanostructures/chemistry , Nanotechnology/methodsABSTRACT
Facile and controllable synthesis of functional yolk@shell structured nanospheres with a tunable inner core ('yolk') and mesoporous shell is highly desirable, yet it remains a great challenge. Herein, xx developed a strategy based on temperature-regulated swelling and restricted asymmetric shrinkage of polydopamine (PDA) nanospheres, combined with heterogeneous interface self-assembly growth. This method allows a simple and versatile preparation of PDA@mesoporous silica (MS) nanospheres exhibiting tunable yolk@shell architectures and shell pore sizes. Through reaction temperature-regulated swelling degree and confined shrinkage of PDA nanospheres, the volume ratio of the hollow cavity that the PDA core occupies can easily be tuned from ca. 2/3 to ca. 1/2, then to ca. 2/5, finally to ca. 1/3. Owing to the presence of PDA with excellent photothermal conversion capacity, the PDA@MS nanocomposites with asymmetric yolk distributions can become a colloidal nanomotor propelled by near-infrared (NIR) light. Noteworthily, the PDA@MS with half PDA yolk and microcracks in silica shell reaches 2.18 µm2 s-1 of effective diffusion coefficient (De) in the presence of 1.0 W cm-2 NIR light. This temperature-controlled swelling approach may provide new insight into the design and facile preparation of functional PDA-based yolk@shell structured nanocomposites for wide applications in biology and medicine.
Subject(s)
Nanocomposites , Silicon Dioxide , Silicon Dioxide/chemistry , Temperature , Polymers/chemistryABSTRACT
Synthesis of anisotropic carbonaceous nano- and micro-materials with well-ordered mesoporous structures has attracted increasing attention for a broad scope of applications. Although hard-templating method has been widely employed, overcoming the viscous forces to prepare anisotropic mesoporous materials is particularly challenging via the universal soft-templating method, especially from sustainable biomass as a carbon resource. Herein, the synthesis of biomass-derived nanowire-arrays based mesoporous nanorods and teeth-like superstructures is reported, through a simple and straightforward polyelectrolyte assisted soft-templating hydrothermal carbonization (HTC) approach. A surface energy induced interfacial assembly mechanism with the synergetic interactions between micelles, nanowire, nanorods, and polyelectrolyte is proposed. The polyelectrolyte acts not only as a stabilizer to decrease the surface energy of cylindrical micelles, nanowires and nanorods, but also as a structure-directing agent to regulate the oriented attachment and anisotropic assembly of micelles, nanowires, and nanorods. After a calcination treatment, the carbon nanorod and teeth-like superstructure are successfully coupled with Ru to directly produce supported catalysts for the hydrogen evolution reaction, exhibiting much better performance than the isotropic nanospheres based catalyst. This HTC approach will open up new avenues for the synthesis of anisotropic materials with various morphologies and dimensions, expanding the palette of materials selection for many applications.