Gemcitabine-Phospholipid Complex Loaded Lipid Nanoparticles for Improving Drug Loading, Stability, and Efficacy against Pancreatic Cancer.

This study aims to encapsulate gemcitabine (GEM) using a phospholipid complex (PLC) in lipid nanoparticles (NPs) to achieve several desirable outcomes, including high drug loading, uniform particle size, improved therapeutic efficacy, and reduced toxicities. The successful preparation of GEM-loaded lipid NPs (GEM-NPs) was accomplished using the emulsification-solidification method, following optimization through Box-Behnken design. The size of the GEM-NP was 138.5 ± 6.7 nm, with a low polydispersity index of 0.282 ± 0.078, as measured by a zetasizer and confirmed by transmission electron and atomic force microscopy. GEM-NPs demonstrated sustained release behavior, surpassing the performance of the free GEM and phospholipid complex. Moreover, GEM-NPs exhibited enhanced cytotoxicity, apoptosis, and cell uptake in Panc-2 and Mia PaCa cells compared to the free GEM. The in vivo pharmacokinetics revealed approximately 4-fold higher bioavailability of GEM-NPs in comparison with free GEM. Additionally, the pharmacodynamic evaluation conducted in a DMBA-induced pancreatic cancer model, involving histological examination, serum IL-6 level estimation, and expression of cleaved caspase-3, showed the potential of GEM-NPs in the management of pancreatic cancer. Consequently, the lipid NP-based approach developed in our investigation demonstrates high stability and uniformity and holds promise for enhancing the therapeutic outcomes of GEM.

Accelerative Solid-State Oxidation Behaviour of Amorphous and Partially Crystalline Venetoclax.

There is a growing focus on solid-state degradation, especially for its relevance in understanding interactions with excipients. Performing a solid-state degradation of Venetoclax (VEN), we delve into VEN's stability in different solid-state oxidative stress conditions, utilizing Peroxydone™ complex and urea peroxide (UHP). The investigation extends beyond traditional forced degradation scenarios, providing insights into VEN's behavior over 32 h, considering temperature and crystallinity conditions. Distinct behaviors emerge in the cases of Peroxydone™ complex and UHP. The partially crystalline (PC-VEN) form proves more stable with Peroxydone™, while the amorphous form (A-VEN) shows enhanced stability with UHP. N-oxide VEN, a significant degradation product, varies between these cases, reflecting the impact of different oxidative stress conditions. Peroxydone™ complex demonstrates higher reproducibility and stability, making it a promising option for screening impurities in solid-state oxidative stress scenarios. This research not only contributes to the understanding of VEN's stability in solid-state but also aids formulators in anticipating excipient incompatibilities owing to presence of reactive impurities (peroxides) and oxidation in the final dosage form.

Influence of PLGA End Groups on the Release Profile of Dexamethasone from Ocular Implants.

The present study deals with the development of dexamethasone (DM)-loaded implants using ester end-capped Resomer RG 502 poly(lactic acid-co-glycolic acid) (PLGA) (502), acid end-capped Resomer RG 502H PLGA (502H), and a 502H:502 mixture (3:1) via hot melt extrusion (HME). The prepared intravitreal implants (20 and 40% DM loaded in each PLGA) were thoroughly investigated to determine the effect of different end-capped PLGA and drug loading on the long-term release profile of DM. The implants were characterized for solid-state active pharmaceutical ingredient (APIs) using DSC and SWAXS, water uptake during stability study, the crystal size of API in the implant matrix using hot-stage polarized light microscopy, and in vitro release profile. The kinetics of PLGA release was thoroughly investigated using quantitative 1H NMR spectroscopy. The polymorph of DM crystal was found to remain unchanged after the extrusion and stability study. However, around 3 times reduction in API particle size was observed after the HME process. The morphology and content uniformity of the RT-stored samples were found to be comparable to the initial implant samples. Interestingly, the samples (mainly 502H) stored at 40 °C and 75% RH for 30 d demonstrated marked deformation and a change in content uniformity. The rate of DM release was higher in the case of 502H samples with a higher drug loading (40% w/w). Furthermore, a simple digital in vitro DM release profile derived for the formulation containing a 3:1 ratio of 502H and 502 was comparable with the experimental release profile of the respective polymer mixture formulation. The temporal development of pores and/or voids in the course of drug dissolution, evaluated using µCT, was found to be a precursor for the PLGA release. Overall, the release profile of DM was found to be dependent on the PLGA type (independent of subtle changes in the formulation mass and diameter). However, the extent of release was found to be dependent on DM loading. Thus, the present investigation led to a thorough understanding of the physicochemical properties of different end-capped PLGAs and the underlying formulation microstructure on the release profile of a crystalline water-insoluble drug, DM, from the PLGA-based implant.

Phase Behavior of Drug-Lipid-Surfactant Ternary Systems toward Understanding the Annealing-Induced Change.

The present study systematically investigates the effect of annealing conditions and the Kolliphor P 407 content on the physicochemical and structural properties of Compritol (glyceryl behenate) and ternary systems prepared via melt cooling (Kolliphor P 407, Compritol, and a hydrophilic API) representing solid-lipid formulations. The physical properties of Compritol and the ternary systems with varying ratios of Compritol and Kolliphor P 407 were characterized using differential scanning calorimetry (DSC), small- and wide-angle X-ray scattering (SWAXS) and infrared (IR) spectroscopy, and hot-stage microscopy (HSM), before and after annealing. The change in the chemical profiles of different Compritol components as a function of annealing was evaluated using 1H NMR spectroscopy. While no change in the polymorphic form of API and Kolliphor P 407 occurred during annealing, a systematic conversion of the α- to ß-form was observed in the case of Compritol. Furthermore, the polymorphic transformation of Compritol was found to be dependent on the Kolliphor P 407 content. As per the Flory-Huggins mixing theory, higher miscibility was observed in the case of monobehenin-Kolliphor P 407, monobehenin-dibehenin, and dibehenin-tribehenin binary mixtures. The miscibility of Kolliphor P 407 with monobehenin and 1,2-dibehenin was confirmed by 1H NMR analysis. The observed higher miscibility of Kolliphor P 407 with monobehenin and 1,2-dibehenin is proposed as the trigger for the physical separation from the 1,3-diglyceride and triglycerides during melt solidification of the formulations. The phase separation is postulated as the mechanism underlying the formation of a stable ß-polymorphic form (a native form of 1,3-diglyceride) of Compritol upon annealing. This finding is expected to have an important implication for developing stable solid-lipid-surfactant-based drug formulations.

Impact of Extractables/Leachables from Filter Materials on the Stability of Protein-Based Pharmaceutical Products.

The manufacturing of biopharmaceutical drug solutions can involve close contact with various polymeric components, including common filter membranes. Potential leachable substances from filters may interact with the protein and thereby increase the structural damage and aggregation. The main aim of the study deals with the assessment of extractable and leachable (E/L) from different filters and the potential effect of E/Ls on protein (human granulocyte-colony stimulating factor (rh-GCSF) stability. The present study examines the E/L profile of five different polymeric filter membranes using various chromatographic techniques including LC-MS and GC-MS. In order to investigate their effect on protein stability, G-CSF (human granulocyte colony-stimulating factor) formulations were spiked with filter leachable stock solutions at two different pH levels. The spiked formulations were further analyzed with respect to their aggregation behavior. The results demonstrated a higher E/L content in the case of polyamide (PA), polycarbonate (PC), and polyethersulfone (PES) filters as compared to the polytetrafluoroethylene (PTFE) and regenerative cellulose (RC) filter materials. The E/L from RC and PES was found surface-active, whereas E/L from PA and RC significantly altered the particle size/structure resulting in the aggregation of proteins. Furthermore, bisphenol A was found to be one of the E/L substances from PC filters and can impose significant health problems when administered along with pharmaceutical products. The present study reports a qualitative rank ordering of the filter membranes in terms of their propensity to generate E/Ls and thus can be helpful in selecting a suitable membrane filter.

Lipid- and TPGS-Based Core-Shell-Type Nanocapsules Endowed with High Paclitaxel Loading and Enhanced Anticancer Potential.

The current study elucidates the improved drug loading of paclitaxel (PTX) in lipid- and D-α-tocopheryl polyethylene glycol succinate (TPGS)-based core-shell-type lipid nanocapsules (PTX-TPGS-LNC) for augmenting the therapeutic efficacy and curbing the toxicity. PTX-TPGS-LNCs were formulated by employing anti-solvent precipitation technique and displayed a particle size of 162.1 ± 4.70 nm and % practical drug loading of 15.04 ± 2.44%. Electron microscopy revealed that PTX-TPGS-LNCs have spherical morphology and the inner core was surrounded by a relatively lighter region, i.e., layer of lipids and TPGS. The nature of loaded PTX inside the PTX-TPGS-LNC was also confirmed using DSC and PXRD analysis. The in vitro release study showed biphasic and sustained release pattern of PTX from PTX-TPGS-LNC and it showed ~ threefold higher PTX uptake in MCF-7 cell line in comparison to free PTX. Moreover, it was apparent from the cytotoxicity assay that PTX-TPGS-LNC displayed higher cytotoxicity in MCF-7 cells and revealed ~ 2.92-fold decrease in IC50 value as against free PTX when incubated for 72 h. The apoptotic index in case of PTX-TPGS-LNC was ~ twofold higher than free PTX. The pharmacokinetic profile of PTX-TPGS-LNC revealed a ~ 3.18-fold increase in t1/2 and a ~ 2.62-fold higher AUC(0→∞) compared to Intaxel®. Finally, treatment with PTX-TPGS-LNC demonstrated significant lowering in the % tumor burden and serum toxicity markers compared to marketed formulation Intaxel®. Thus, the lipid- and TPGS-based core-shell-type LNC with high PTX loading can advance the existing standards of therapy for overshadowing cancer.

Interplay of Aging and Lot-to-Lot Variability on the Physical and Chemical Properties of Excipients: A Case Study of Mono- and Diglycerides.

The present study investigates the chemical composition governing the physical properties of mono- and diglycerides (MDGs) at the microstructural level, as a function of aging and lot-to-lot variability. The physical structure of the MDG plays a vital role in ameliorating the emulsion stability and is widely explored in diverse research horizons related to the pharmaceutical, cosmetic, and food industries. In an effort to understand the mechanism of emulsion stabilization, physical properties were extensively evaluated in selective commercial lots to determine if there is a correlation between the chemical composition of MDG and physical properties. The solid state of the MDG samples with different aging profiles was characterized using X-ray scattering, differential scanning calorimetry, attenuated total reflection-Fourier transform infrared spectroscopy, and NMR relaxometry. Moreover, the kinetic aspect of solid-state transformation was also evaluated via treating MDG samples with a heat-cool cycle. The chemical composition of MDGs was quantified using a quantitative NMR (qNMR) method. Interestingly, the X-ray scattering results demonstrated a change in the MDG polymorphic form and an increase in the %ß content as a function of aging. The increase in the %ß content led to the formation of rigid crystal structures of MDG, as evident from the NMR relaxometry. Chemical quantification of isomeric composition revealed chemical composition change as a potentially critical factor responsible for the altered physical structures of MDG with respect to aging and lot-to-lot variability. The findings correlated the solid-state transformation with the change in the chemical composition of the MDG as a combined effect of aging and lot-to-lot variability. This work serves as a basis to better understand the interdependency of the physicochemical properties of MDG. Furthermore, the present work can also be used as guidance for setting up the specifications of MDG, as per the required polymorphic form for a multitude of applications.

Co-administration of zinc phthalocyanine and quercetin via hybrid nanoparticles for augmented photodynamic therapy.

The photodynamic anticancer activity of a photosensitizer can be further increased by co-administration of a flavonoid. However, this requires that both molecules must be effectively accumulated at the tumor site. Hence, in order to enhance the activity of zinc phthalocyanine (ZnPc, photosensitizer), it was co-encapsulated with quercetin (QC, flavonoid) in lipid polymer hybrid nanoparticles (LPNs) developed using biodegradable & biocompatible materials and prepared using a single-step nanoprecipitation technique. High stability and cellular uptake, sustained release, inherent fluorescence, of ZnPC were observed after encapsulation in the LPNs, which also showed a higher cytotoxic effect in breast carcinoma cells (MCF-7) compared to photodynamic therapy (PDT) alone. In vivo studies in tumor-bearing Sprague Dawley rats demonstrated that the LPNs were able to deliver ZnPc and QC to the tumor site with minimal systemic toxicity and increased antitumor effect. Overall, the photodynamic effect of ZnPc was synergized by QC. This strategy could be highly beneficial for cancer management in the future while nullifying the side effects of chemotherapy.

Mycophenolate co-administration with quercetin via lipid-polymer hybrid nanoparticles for enhanced breast cancer management.

Mycophenolic acid (MPA) has promising anticancer properties; however, it has limited clinical applications in vivo due to hydrophobic nature, high first-pass metabolism, lack of targeting, etc. These associated problems could be addressed by developing a suitable delivery vehicle, inhibiting the first-pass metabolism and additive/synergistic pharmacodynamic effect. Thus, MPA loaded highly stable lipid polymer hybrid nanoparticles (LPNs) were developed and investigated with the combination of quercetin (QC), a CYP 450 inhibitor cum anticancer. LPNs of MPA and QC (size; 136 ±â€¯12 and 176 ±â€¯35 nm, respectively) demonstrated higher cellular uptake and cytotoxicity of combination therapy (MPA-LPN + QC-LPN) compared to individual congeners in MCF-7 cells. In vivo pharmacokinetics demonstrated 2.17 fold higher T1/2 value and significantly higher pharmacodynamic activity in case of combination therapy compared to free MPA. In nutshell, the combinatory therapeutic regimen of MPA and QC could be a promising approach in improved breast cancer management.

Quantitative Chemical Profiling of Commercial Glyceride Excipients via 1H NMR Spectroscopy.

Glycerides are the main components of oils, and fats, used in formulated products in the food and cosmetic industry as well as in the pharmaceutical product industry. However, there is limited literature available on the analysis of the chemical composition of glycerides. The lack of a suitable analytical method for complete chemical profiling of glycerides is one of the bottlenecks in understanding and controlling the change in chemical composition during processing, formulation, and storage. Thus, the aim of the present study is to develop a calibration-free quantitative proton nuclear magnetic resonance (qHNMR) method for the simultaneous quantification of different components of glycerides. The qHNMR method was developed for the quantification of mono-, di-, and triglycerides; their positional isomers; free fatty acids; and glycerol content. The accuracy, precision, and robustness of the developed method were evaluated and were found suitable for the quantitative analysis of five batches of marketed excipient. The study demonstrates the potential of qHNMR method for the quantification of different components of glycerides in various marketed products. The method has the ability to identify the variability of glycerides among different batches and suppliers in terms of chemical composition and also to discern the changes during storage.

Polyglutamic Acid Functionalization of Chitosan Nanoparticles Enhances the Therapeutic Efficacy of Insulin Following Oral Administration.

In the present study, stable chitosan nanoparticles (Ch-NPs) were developed using the ionotropic gelation method, where poly(sodium 4-styrenesulfonate) (PSS) was used as a cross-linking agent while polyglutamic acid (PGA) for functionalization to improve the oral uptake through calcium-sensing receptors and amino acid transporters present in intestinal epithelium. Formulation was optimized by the design of experiments (DoE) approach using a three-level central composite design and characterized for in vitro parameters such as morphology, particle size, polydispersity index (PDI), entrapment efficiency and zeta potential. Morphological analysis demonstrated the formation of spherical NPs with particle size, zeta potential, and entrapment efficiency in the range of 210 nm ± 2.8 nm, 18.1 mV ± 0.14 mV, and 85.9% ± 0.28%, respectively. The developed NPs exhibited sustained release at different pH conditions and almost threefold higher uptake in comparison with non-functionalized NPs in Caco-2 cell uptake studies. In vivo studies in diabetic animals demonstrated low levels of plasma glucose for almost 24 h. Pharmacological availability (PA) of insulin administered through Ch-PSS-PGA NPs (17.28 ± 0.9) was significantly higher as compared to that of insulin administered through control NPs, i.e., Ch-PGA NPs (10.9 ± 1.5) and Ch-PSS NPs (12.9 ± 1.8). Data on hand suggest the ability of the developed NPs in overcoming the poor stability and, thus, poor therapeutic efficacy following oral administration.

Design and Toxicity Evaluation of Novel Fatty Acid-Amino Acid-Based Biocompatible Surfactants.

Surfactants occupy an important place owing to their wide application, but primarily compromised due to its toxicity issues. This raises the need for exploration of newer surfactants with increased biocompatibility. Novel fatty acid- and amino acid-based surfactants were prepared using standard carbodiimide chemistry. Pyrene assay was implemented to confirm the amphiphilic nature of the surfactants and to calculate their CMC (critical micellar concentration). In vitro hemolytic and cell culture study in MCF-7 and HEK cell line were done to check the in vitro biocompatibility of the developed surfactants in comparison to marketed surfactants Triton X-100 and Tween ® 80. In vivo biocompatibility test in female Swiss albino mice was carried out in comparison to marketed surfactants with respect to serum markers, organ histology, and RBC morphology. Surfactant synthesis provided more than 60% yield in all the conjugates. Pyrene assay concluded the amphiphilic nature of the surfactants with lowest CMC of 0.083% w/v in the case of stearic acid and valine conjugate. In vitro hemolytic and cell culture study depicted highest biocompatibility in vitro as compared to marketed surfactants. Similar results were obtained in in vivo biocompatibility with respect to AST (aspartate transaminase), ALT (alanine transaminase), BUN (blood urea nitrogen), and creatinine serum levels and histology of spleen, liver, and kidney in comparison to marketed surfactants Triton X-100 and Tween ® 80. The developed surfactant also depicted least RBC morphology changes in vivo. Stearic acid valine conjugate thus depicted potential for further application in formulation development replacing the commercially available surfactants.

Co-delivery of docetaxel and gemcitabine using PEGylated self-assembled stealth nanoparticles for improved breast cancer therapy.

The present report deals with conjugation of dual drug; docetaxel (DTX) and gemcitabine (GEM) with linker poly-ethylene-glycol (PEG) to develop amphiphilic molecule having self-assembled property. The synthesized conjugate (DTX-PEG-GEM) demonstrated critical micelle concentration (CMC) in the range of 5-10 µg/ml which self-assembled to form NPs with size 124.2 ±â€¯5.7. Remarkably higher coumarin-6 (C-6) fluorescence signals observed in case of C-6 loaded NPs, suggested enhanced cellular uptake via clathrin mediated endocytosis. Developed NPs demonstrated 4.8-fold higher AUC(0-∞) value of GEM in comparison with Gemzar®. Tumor growth inhibition study demonstrated significant reduction in tumor volume and higher survival rate with NPs. Moreover, NPs demonstrated significantly lower hepato- and nephro-toxicity, evident from both histopathological sections and biochemical markers level estimation, and hemolytic toxicity. Data in hand suggest enhanced therapeutic efficacy and reduced toxicity of developed NPs over conventional drugs, resulting in efficient combinatorial chemotherapeutic-regimen and patient compliance, which is still an unmet task.

Improved Oral Bioavailability, Therapeutic Efficacy, and Reduced Toxicity of Tamoxifen-Loaded Liquid Crystalline Nanoparticles.

Present investigation deals with formulation and evaluation of tamoxifen (TMX)-loaded liquid crystalline nanoparticles (TMX-LCNPs) for improving oral bioavailability and safety of the existing treatment. Hexagonal Glyceryl monooleate-based TMX-LCNPs (GLCNPs) and Phytantriol-based TMX-LCNPs (PLCNPs) were prepared by dilution-through-hydrotrope method for oral administration. Oleic acid was incorporated in the lipid matrix to enhance the drug loading in the LCNPs. Optimized LCNPs displayed small particle size with a narrow distribution, sustained drug release and high gastrointestinal stability. TMX-LCNPs were found to be considerably higher cytotoxic to MCF-7 cells as compared to free TMX. Substantial fold enhancement in oral bioavailability (~7- and ~5-folds with TMX-GLCNPs and TMX-PLCNPs, respectively) was evident followed by significant reduction in tumor burden with lesser hepatotoxicity. Out of the two LCNP formulations, PLCNPs were found to be better in convalescing the disease.

Amphotericin B Loaded Chitosan Nanoparticles: Implication of Bile Salt Stabilization on Gastrointestinal Stability, Permeability and Oral Bioavailability.

Through current investigation, we presented a lucrative way to formulate amphotericin B loaded bile salt stabilized carbohydrate polymer i.e. chitosan nanoparticles (NPs) for enhancing gastrointestinal stability of NPs thereby increasing the oral bioavailability of the drug. NPs were prepared using ionic gelation method, and stabilized using bile salt to provide gastric pH stability to chitosan NPs. NPs were optimized on different parameters such as particle size, encapsulation efficiency and estimated for their in vitro and in vivo performance. Developed NPs presented a higher stability in gastrointestinal milieu, reduced haemolytic toxicity and significantly higher uptake in Caco-2 cell lines followed by increased bioavailability as compared to naive drug, marketed formulation i.e. Fungizone® and uncoated chitosan NPs. Biochemical parameters and histology further substantiated the lower toxicity. In nutshell, the present research explored the bioadhesive and higher uptake potential of cationic carbohydrate polymer at the same time along with bile salts for stabilization of NPs in gastric milieu.

Lyotropic Liquid Crystalline Nanoparticles of Amphotericin B: Implication of Phytantriol and Glyceryl Monooleate on Bioavailability Enhancement.

Implication of different dietary specific lipids such as phytantriol (PT) and glyceryl monooleate (GMO) on enhancing the oral bioavailability of amphotericin B (AmB) was examined. Liquid crystalline nanoparticles (LCNPs) were prepared using hydrotrope method, followed by in vitro characterization, Caco-2 cell monolayer uptake, and in vivo pharmacokinetic and toxicity evaluation. Optimized AmB-LCNPs displayed small particle size (< 210 nm) with a narrow distribution (~ 0.2), sustained drug release and high gastrointestinal stability, and reduced hemolytic toxicity. PLCNPs presented slower release, i.e., ~ 80% as compared to ~ 90% release in case of GLCNPs after 120 h. Significantly higher uptake in Caco-2 monolayer substantiated the role of LCNPs in increasing the intestinal permeability followed by increased drug titer in plasma. Pharmacokinetic studies demonstrated potential of PT in enhancing the bioavailability (approximately sixfold) w.r.t. of its native counterpart with reduced nephrotoxicity as presented by reduced nephrotoxicity biomarkers and histology studies. These studies established usefulness of PLCNPs over GLCNPs and plain drug. It can be concluded that acid-resistant lipid, PT, can be utilized efficiently as an alternate lipid for the preparation of LCNPs to enhance bioavailability and to reduce nephrotoxicity of the drug as compared to other frequently used lipid, i.e., GMO.

"Liquid Crystalline Nanoparticles": Rationally Designed Vehicle To Improve Stability and Therapeutic Efficacy of Insulin Following Oral Administration.

In the present article we investigate the feasibility of liquid crystalline nanoparticles (LCNPs) to improve the stability and therapeutic efficacy of insulin following oral administration. Compatibility studies of different formulation ingredients with insulin and extensive optimization of different process variables resulted into the formation of LCNPs with particle size of 245.50 ± 6.36 nm, PDI of 0.220 ± 0.042, and zeta potential of -18.30 ± 1.27 mV with an entrapment efficiency of 44.17 ± 1.47%. Mannitol (5% w/v) was identified as a suitable cryoprotectant to produce freeze-dried LCNPs without affecting their critical quality attributes. LCNPs demonstrated excellent stability in simulated biological fluids by simultaneously retaining the chemical and conformational stability of the insulin entrapped within the LCNPs. A sustained release of insulin was observed for up to 24 h in PBS (pH 7.4). Developed LCNPs demonstrated remarkably higher Caco-2 cell uptake in comparison with free insulin-FITC and more than double the cumulative hypoglycemia in comparison with subcutaneously administered insulin solution in diabetic rats. Data in hand suggest that the proposed formulation strategy can be exploited for improving the therapeutic efficacy of biomacromolecules like insulin.

Improved Stability and Enhanced Oral Bioavailability of Atorvastatin Loaded Stearic Acid Modified Gelatin Nanoparticles.

PURPOSE: The present study evaluates the effects of stearic acid conjugation with gelatin and, its pharmaceutical potential to formulate novel atorvastatin (AT) loaded nanoparticles. METHOD: AT loaded stearic acid modified gelatin nanoparticles (AT-MG NPs) were prepared via two-step desolvation method with extensive optimization of different process variables. Further, the developed nanoparticles where evaluated against in vitro Caco-2 cell model and in vivo bioavailability. RESULTS: Extensive optimization of nanoformulation resulted into the formation of AT-MG NPs with particle size 247.7 ± 10.9 nm, PDI 0.219 ± 0.07, and entrapment efficiency 58.7 ± 5.3%. Freeze dried nanoparticles were found to have spherical shape as determined by SEM and demonstrated excellent stability in simulated gastrointestinal conditions and during storage. Developed nanoparticles exhibited sustained release up to 24 h and remarkably higher Caco-2 cell uptake. Mechanistic studies further revealed the clathrin and caveolae mediated endocytosis as principle mechanism. In line with Caco-2 cell uptake observations, AT-MG NPs showed ∼4.84-fold increase in the AUC0-∞ values of AT in comparison with free AT following oral administration. CONCLUSION: Overall, the stearic acid conjugated gelatin NPs demonstrates a promising potential in improving the drug payload of BCS class II drugs and enhancing oral bioavailability.

Novel Gemcitabine Conjugated Albumin Nanoparticles: a Potential Strategy to Enhance Drug Efficacy in Pancreatic Cancer Treatment.

PURPOSE: The present study reports a novel conjugate of gemcitabine (GEM) with bovine serum albumin (BSA) and thereof nanoparticles (GEM-BSA NPs) to potentiate the therapeutic efficacy by altering physicochemical properties, improving cellular uptake and stability of GEM. METHODS: The synthesized GEM-BSA conjugate was extensively characterized by NMR, FTIR, MALDI-TOF and elemental analysis. Conjugation mediated changes in structural conformation and physicochemical properties were analysed by fluorescence, Raman and CD spectroscopy, DSC and contact angle analysis. Further, BSA nanoparticles were developed from BSA-GEM conjugate and extensively evaluated against in-vitro pancreatic cancer cell lines to explore cellular uptake pathways and therapeutic efficacy. RESULTS: Various characterization techniques confirmed covalent conjugation of GEM with BSA. GEM-BSA conjugate was then transformed into NPs via high pressure homogenization technique with particle size 147.2 ± 7.3, PDI 0.16 ± 0.06 and ZP -19.2 ± 1.4. The morphological analysis by SEM and AFM revealed the formation of smooth surface spherical nanoparticles. Cellular uptake studies in MIA PaCa-2 (GEM sensitive) and PANC-1 (GEM resistant) pancreatic cell lines confirmed energy dependent clathrin internalization/endocytosis as a primary mechanism of NPs uptake. In-vitro cytotoxicity studies confirmed the hNTs independent transport of GEM in MIA PaCa-2 and PANC-1 cells. Moreover, DNA damage and annexin-V assay revealed significantly higher apoptosis level in case of cells treated with GEM-BSA NPs as compared to free GEM. CONCLUSIONS: GEM-BSA NPs were found to potentiate the therapeutic efficacy by altering physicochemical properties, improving cellular uptake and stability of GEM and thus demonstrated promising therapeutic potential over free drug. Graphical Abstract ᅟ.

pH responsive biodegradable nanogels for sustained release of bleomycin.

Site specific drug delivery with desired therapeutic effect still remains challenging task due to suboptimal release, tissue toxicity, low selectivity and meager therapeutic efficacy in skin cancers. The aim of the current study was to fabricate pH responsive, self-assembled, chemically cross-linked biodegradable chitosan nanogel loaded with bleomycin to target the dermal area of the skin. The nanogel synthesized by ion gelation technique and was characterized for drug loading, swelling and thermal stability followed by in vitro analysis. HaCaT (Human Keratinocyte cell) and HDF (Human dermal fibroblast) cell line were used for the biocompatibility and cytocompatibility evaluation prior to the hemolysis assay and coagulation assessment. The nanogel had a size range of 150nm as determined by TEM and DLS. The nanogel possessed optimum thermal stability as analyzed by thermogravimetry (TG) and differential thermal analysis (DTA). Biodegradation was confirmed by lysozyme enzyme degradation assays. The drug entrapment efficacy was about 55% in the swollen state. The In vitro drug release profile revealed sustained release pattern. The hemolysis of 2.39% and prothrombin time (PT) and activated partial thromboplastin time (APTT) of 12.9 and 31s revealed the biocompatibility of nanogels. The cell uptake and localization profile was validated by fluorescence and confocal microscopy using HDF and HaCaT cell lines. Finally, the MTT assay demonstrated the cytocompatibility of nanogels. In conclusion, the present findings suggest that biodegradable chitosan nanogels with stimuli responsive nature can release the anticancer drug cargo in a sustained and controlled manner and offer promising potentials for treating skin cancers. STATEMENT OF SIGNIFICANCE: Drug delivery to the targeted site is a major challenge in clinical medicine. The newly constructed pH responsive biodegradable nanogel consisting of bleomycin revealed pH triggered drug release in a sustained manner to the dermal area offering novel approach against skin cancer. The nanogel system is biodegradable in nature possessing high drug entrapment efficiency and offers patient compliance with biocompatible and cytocompatible characteristics. This nanogel system can thus be highly useful for delivery of anticancer drugs to the skin in a controlled and sustained manner.