Non-epitaxial single-crystal 2D material growth by geometric confinement.

Two-dimensional (2D) materials and their heterostructures show a promising path for next-generation electronics1-3. Nevertheless, 2D-based electronics have not been commercialized, owing mainly to three critical challenges: i) precise kinetic control of layer-by-layer 2D material growth, ii) maintaining a single domain during the growth, and iii) wafer-scale controllability of layer numbers and crystallinity. Here we introduce a deterministic, confined-growth technique that can tackle these three issues simultaneously, thus obtaining wafer-scale single-domain 2D monolayer arrays and their heterostructures on arbitrary substrates. We geometrically confine the growth of the first set of nuclei by defining a selective growth area via patterning SiO2 masks on two-inch substrates. Owing to substantial reduction of the growth duration at the micrometre-scale SiO2 trenches, we obtain wafer-scale single-domain monolayer WSe2 arrays on the arbitrary substrates by filling the trenches via short growth of the first set of nuclei, before the second set of nuclei is introduced, thus without requiring epitaxial seeding. Further growth of transition metal dichalcogenides with the same principle yields the formation of single-domain MoS2/WSe2 heterostructures. Our achievement will lay a strong foundation for 2D materials to fit into industrial settings.

Survey of spiking in the mouse visual system reveals functional hierarchy.

The anatomy of the mammalian visual system, from the retina to the neocortex, is organized hierarchically1. However, direct observation of cellular-level functional interactions across this hierarchy is lacking due to the challenge of simultaneously recording activity across numerous regions. Here we describe a large, open dataset-part of the Allen Brain Observatory2-that surveys spiking from tens of thousands of units in six cortical and two thalamic regions in the brains of mice responding to a battery of visual stimuli. Using cross-correlation analysis, we reveal that the organization of inter-area functional connectivity during visual stimulation mirrors the anatomical hierarchy from the Allen Mouse Brain Connectivity Atlas3. We find that four classical hierarchical measures-response latency, receptive-field size, phase-locking to drifting gratings and response decay timescale-are all correlated with the hierarchy. Moreover, recordings obtained during a visual task reveal that the correlation between neural activity and behavioural choice also increases along the hierarchy. Our study provides a foundation for understanding coding and signal propagation across hierarchically organized cortical and thalamic visual areas.

Advancements in small cell lung cancer.

Small cell lung cancer (SCLC) is a recalcitrant cancer with an urgent need for novel therapeutics, preclinical models, and elucidation of the molecular pathways responsible for its rapid resistance. Recently, there have been many significant advancements in our knowledge of SCLC that led to the development of novel treatments. This review will go over the recent attempts to provide new molecular subcategorization of SCLC, recent breakthroughs in various systemic treatments including immunotherapy, targeted therapy, cellular therapy, as well as advancements in radiation therapy.

Transdermal Hydrogen Sulfide Delivery Enabled by Open-Metal-Site Metal-Organic Frameworks.

Hydrogen sulfide (H2S) is an endogenously produced gasotransmitter involved in many physiological processes that are integral to proper cellular functioning. Due to its profound anti-inflammatory and antioxidant properties, H2S plays important roles in preventing inflammatory skin disorders and improving wound healing. Transdermal H2S delivery is a therapeutically viable option for the management of such disorders. However, current small-molecule H2S donors are not optimally suited for transdermal delivery and typically generate electrophilic byproducts that may lead to undesired toxicity. Here, we demonstrate that H2S release from metal-organic frameworks (MOFs) bearing coordinatively unsaturated metal centers is a promising alternative for controlled transdermal delivery of H2S. Gas sorption measurements and powder X-ray diffraction (PXRD) studies of 11 MOFs support that the Mg-based framework Mg2(dobdc) (dobdc4- = 2,5-dioxidobenzene-1,4-dicarboxylate) is uniquely well-suited for transdermal H2S delivery due to its strong yet reversible binding of H2S, high capacity (14.7 mmol/g at 1 bar and 25 °C), and lack of toxicity. In addition, Rietveld refinement of synchrotron PXRD data from H2S-dosed Mg2(dobdc) supports that the high H2S capacity of this framework arises due to the presence of three distinct binding sites. Last, we demonstrate that transdermal delivery of H2S from Mg2(dobdc) is sustained over a 24 h period through porcine skin. Not only is this significantly longer than sodium sulfide but this represents the first example of controlled transdermal delivery of pure H2S gas. Overall, H2S-loaded Mg2(dobdc) is an easily accessible, solid-state source of H2S, enabling safe storage and transdermal delivery of this therapeutically relevant gas.

Spectrally Resolved Exciton Polarizability for Understanding Charge Generation in Organic Bulk Hetero-Junction Diodes.

Despite decades of research, the dominant charge generation mechanism in organic bulk heterojunction (BHJ) devices is not completely understood. While the local dielectric environments of the photoexcited molecules are important for exciton dissociation, conventional characterizations cannot separately measure the polarizability of electron-donor and electron-acceptor, respectively, in their blends, making it difficult to decipher the spectrally different charge generation efficiencies in organic BHJ devices. Here, by spectrally resolved electroabsorption spectroscopy, we report extraction of the excited state polarizability for individual donors and acceptors in a series of organic blend films. Regardless of the donor and acceptor, we discovered that larger exciton polarizability is linked to larger π-π coherence length and faster charge transfer across the heterojunction, which fundamentally explains the origin of the higher charge generation efficiency near 100% in the BHJ photodiodes. We also show that the molecular packing of the donor and acceptor influence each other, resulting in a synergetic enhancement in the exciton polarizability.

High-Capacity, Cooperative CO2 Capture in a Diamine-Appended Metal-Organic Framework through a Combined Chemisorptive and Physisorptive Mechanism.

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks are promising candidates for carbon capture that exhibit exceptional selectivities and high capacities for CO2. To date, CO2 uptake in these materials has been shown to occur predominantly via a chemisorption mechanism involving CO2 insertion at the amine-appended metal sites, a mechanism that limits the capacity of the material to ∼1 equiv of CO2 per diamine. Herein, we report a new framework, pip2-Mg2(dobpdc) (pip2 = 1-(2-aminoethyl)piperidine), that exhibits two-step CO2 uptake and achieves an unusually high CO2 capacity approaching 1.5 CO2 per diamine at saturation. Analysis of variable-pressure CO2 uptake in the material using solid-state nuclear magnetic resonance (NMR) spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) reveals that pip2-Mg2(dobpdc) captures CO2 via an unprecedented mechanism involving the initial insertion of CO2 to form ammonium carbamate chains at half of the sites in the material, followed by tandem cooperative chemisorption and physisorption. Powder X-ray diffraction analysis, supported by van der Waals-corrected density functional theory, reveals that physisorbed CO2 occupies a pocket formed by adjacent ammonium carbamate chains and the linker. Based on breakthrough and extended cycling experiments, pip2-Mg2(dobpdc) exhibits exceptional performance for CO2 capture under conditions relevant to the separation of CO2 from landfill gas. More broadly, these results highlight new opportunities for the fundamental design of diamine-Mg2(dobpdc) materials with even higher capacities than those predicted based on CO2 chemisorption alone.

Factors Considered by Experienced Urologists when Selecting Alpha-Blockers for Patients with Lower Urinary Tract Symptoms or Benign Prostatic Hyperplasia according to Age.

INTRODUCTION: The objectives of the study were to examine the opinions of urology specialists on whether there are actual differences in efficacy among α1-blockers and to identify the factors that should be considered when prescribing these medications according to age. METHODS: We surveyed 50 South Korean urology specialists with over 3 years of clinical experience in secondary or tertiary hospitals in July-August 2021. The survey covered urologists' demographics, awareness of α1-blocker prescription differences, and key factors in α1-blocker selection based on LUTS severity and patient age. RESULTS: Overall, 82% of the respondents believed that there were differences in the efficacy of α1-blockers in actual practice according to age. Over 90% of the respondents agreed on the need for head-to-head comparison studies to compare the effects of different α1-blockers. Regardless of the severity of LUTS, urologists prioritize cardiovascular side effects when prescribing α1-blockers to patients aged ≥70 years. Further, 19% of the urologists prioritized ejaculatory side effects for mild-to-moderate LUTS and 9% for severe LUTS (p < 0.001). CONCLUSIONS: This study shows that head-to-head studies comparing the efficacy of different α1-blockers are highly valuable for the real-world clinical application of α1-blockers. Notably, urologists prioritize cardiovascular and ejaculatory side effects in older and younger patients while prescribing α1-blockers, respectively.

Plasmonic Cross-Linking Colorimetric PCR for Simple and Sensitive Nucleic Acid Detection.

Simple, low-cost, and accurate nucleic acid assay platforms hold great promise for point-of-care (POC) pathogen detection, disease surveillance, and control. Plasmonic photothermal polymerase chain reaction (PPT-PCR) is a powerful and efficient nucleic acid amplification technique, but it lacks a simple and convenient analysis method for POC applications. Herein, we propose a novel plasmonic cross-linking colorimetric PCR (PPT-ccPCR) assay by integrating plasmonic magnetic nanoparticle (PMN)-based PPT-PCR with gold nanoparticle (AuNP)-based cross-linking colorimetry. AuNPs form assembled structures with the PMNs in the presence of amplicons and collect in a magnetic field, resulting in color changes to the supernatant. Target DNA with concentrations as low as 5 copies/µL can be visually detected within 40 min. The achieved limit of detection was 1.8 copies/µL based on the absorption signals. This simple and sensitive strategy needs no expensive instrumentation and demonstrates high potential for POC detection while enabling further applications in clinical diagnostics.

Cooperative Carbon Dioxide Capture in Diamine-Appended Magnesium-Olsalazine Frameworks.

Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) metal-organic frameworks have emerged as promising candidates for carbon capture owing to their exceptional CO2 selectivities, high separation capacities, and step-shaped adsorption profiles, which arise from a unique cooperative adsorption mechanism resulting in the formation of ammonium carbamate chains. Materials appended with primary,secondary-diamines featuring bulky substituents, in particular, exhibit excellent stabilities and CO2 adsorption properties. However, these frameworks display double-step adsorption behavior arising from steric repulsion between ammonium carbamates, which ultimately results in increased regeneration energies. Herein, we report frameworks of the type diamine-Mg2(olz) (olz4- = (E)-5,5'-(diazene-1,2-diyl)bis(2-oxidobenzoate)) that feature diverse diamines with bulky substituents and display desirable single-step CO2 adsorption across a wide range of pressures and temperatures. Analysis of CO2 adsorption data reveals that the basicity of the pore-dwelling amine─in addition to its steric bulk─is an important factor influencing adsorption step pressure; furthermore, the amine steric bulk is found to be inversely correlated with the degree of cooperativity in CO2 uptake. One material, ee-2-Mg2(olz) (ee-2 = N,N-diethylethylenediamine), adsorbs >90% of the CO2 from a simulated coal flue stream and exhibits exceptional thermal and oxidative stability over the course of extensive adsorption/desorption cycling, placing it among top-performing adsorbents to date for CO2 capture from a coal flue gas. Spectroscopic characterization and van der Waals-corrected density functional theory calculations indicate that diamine-Mg2(olz) materials capture CO2 via the formation of ammonium carbamate chains. These results point more broadly to the opportunity for fundamentally advancing materials in this class through judicious design.

Switchable Xe/Kr Selectivity in a Hofmann-Type Metal-Organic Framework via Temperature-Responsive Rotational Dynamics.

The development of adsorbents for Kr and Xe separation is essential to meet industrial demands and for energy conservation. Although a number of previous studies have focused on Xe-selective adsorbents, stimuli-responsive Xe/Kr-selective adsorbents still remain underdeveloped. Herein, a Hofmann-type framework Co(DABCO)[Ni(CN)4 ] (referred to as CoNi-DAB; DABCO = 1,4-diazabicyclo[2,2,2]octane) that provides a temperature-dependent switchable Xe/Kr separation performance is reported. CoNi-DAB showed high Kr/Xe (0.8/0.2) selectivity with significant Kr adsorption at 195 K as well as high Xe/Kr (0.2/0.8) selectivity with superior Xe adsorption at 298 K. Such adsorption features are associated with the temperature-dependent rotational configuration of the DABCO ligand, which affects the kinetic gate-opening temperature of Xe and Kr. The packing densities of Xe (2.886 g cm-3 at 298 K) and Kr (2.399 g  cm-3 at 195 K) inside the framework are remarkable and comparable with those of liquid Xe (3.057 g cm-3 ) and liquid Kr (2.413 g cm-3 ), respectively. Breakthrough experiments confirm the temperature-dependent reverse separation performance of CoNi-DAB at 298 K under dry and wet (88% relative humidity) conditions and at 195 K under dry conditions. The unique adsorption behavior is also verified through van der Waals (vdW)-corrected density functional theory (DFT) calculations and nudged elastic band (NEB) simulations.

Erratum: Cooperative Gas Adsorption without a Phase Transition in Metal-Organic Frameworks [Phys. Rev. Lett. 121, 015701 (2018)].

This corrects the article DOI: 10.1103/PhysRevLett.121.015701.

Lowering the percent body fat in the obese population might reduce male lower urinary tract symptoms.

PURPOSE: This study aimed to investigate the practicality of percent body fat (PBF), calculated using bioelectrical impedance analysis (BIA), in predicting benign prostatic hyperplasia/lower urinary tract symptoms (BPH/LUTS). METHODS: This study included 844 men who underwent medical checkups at our institution between 2014 and 2022. Demographic characteristics, serum PSA levels, and prostate volume were collected using TRUS. BPH was defined as a prostate volume ≥ 30 cc. Subjects were divided into two groups according to their quartiles of PBF: the normal PBF group (first to third quartile; PBF < 27.9%) and the high PBF group (fourth quartile; PBF ≥ 27.9%). Characteristics between the groups were compared using the chi-square test and Student's t-test. Multivariate logistic regression analysis was performed to evaluate risk factors for BPH and severe LUTS. RESULTS: The prostate volume (25.21 ± 8.4 vs 27.30 ± 9.0, p = 0.005) and percentage of BPH (22.9% vs. 32.1%, p = 0.007) were greater in the high PBF group. After multivariate analysis, old age (OR = 1.066, p < 0.001), higher appendicular skeletal muscle mass index (ASMI) (OR = 1.544, p = 0.001), and PBF ≥ 27.9% (OR = 1.455, p = 0.037) were risk factors for BPH. Larger prostate volume (OR = 1.035, p = 0.002) and PBF ≥ 27.9% (OR = 1.715, p = 0.025) were risk factors for severe LUTS. However, a greater ASMI had a protective effect against severe LUTS (OR = 0.654, p = 0.011). CONCLUSIONS: This study shows that PBF and ASMI are useful for predicting BPH/LUTS. We suggest that lowering PBF to the normal range in a population with high PBF might prevent BPH, while lowering PBF and maintaining adequate ASMI could lower LUTS.

Aggresomal sequestration and STUB1-mediated ubiquitylation during mammalian proteaphagy of inhibited proteasomes.

The 26S proteasome, a self-compartmentalized protease complex, plays a crucial role in protein quality control. Multiple levels of regulatory systems modulate proteasomal activity for substrate hydrolysis. However, the destruction mechanism of mammalian proteasomes is poorly understood. We found that inhibited proteasomes are sequestered into the insoluble aggresome via HDAC6- and dynein-mediated transport. These proteasomes colocalized with the autophagic receptor SQSTM1 and cleared through selective macroautophagy, linking aggresomal segregation to autophagic degradation. This proteaphagic pathway was counterbalanced with the recovery of proteasomal activity and was critical for reducing cellular proteasomal stress. Changes in associated proteins and polyubiquitylation on inhibited 26S proteasomes participated in the targeting mechanism to the aggresome and autophagosome. The STUB1 E3 Ub ligase specifically ubiquitylated purified human proteasomes in vitro, mainly via Lys63-linked chains. Genetic and chemical inhibition of STUB1 activity significantly impaired proteasome processing and reduced resistance to proteasomal stress. These data demonstrate that aggresomal sequestration is the crucial upstream event for proteasome quality control and overall protein homeostasis in mammals.

High Gravimetric and Volumetric Ammonia Capacities in Robust Metal-Organic Frameworks Prepared via Double Postsynthetic Modification.

Ammonia is a promising energy vector that can store the high energy density of hydrogen. For this reason, numerous adsorbents have been investigated as ammonia storage materials, but ammonia adsorbents with a high gravimetric/volumetric ammonia capacity that can be simultaneously regenerated in an energy-efficient manner remain underdeveloped, which hampers their practical implementation. Herein, we report Ni_acryl_TMA (TMA = thiomallic acid), an acidic group-functionalized metal-organic framework prepared via successive postsynthetic modifications of mesoporous Ni2Cl2BTDD (BTDD = bis(1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin). By virtue of the densely located acid groups, Ni_acryl_TMA exhibited a top-tier gravimetric ammonia capacity of 23.5 mmol g-1 and the highest ammonia storage of 0.39 g cm-3 at 1 bar and 298 K. The structural integrity and ammonia storage capacity of Ni_acryl_TMA were maintained after ammonia adsorption-desorption tests over five cycles. Temperature-programmed desorption analysis revealed that the moderate strength of the interaction between the functional groups and ammonia significantly reduced the desorption temperature compared to that of the pristine framework with open metal sites. The structures of the postsynthetic modified analogues were elucidated based on Pawley/Rietveld refinement of the synchrotron powder X-ray diffraction patterns and van der Waals (vdW)-corrected density functional theory (DFT) calculations. Furthermore, the ammonia adsorption mechanism was investigated via in situ infrared and vdW-corrected DFT calculations, revealing an atypical guest-induced binding mode transformation of the integrated carboxylate. Dynamic breakthrough tests showed that Ni_acryl_TMA can selectively capture traces of ammonia under both dry and wet conditions (80% relative humidity). These results demonstrate that Ni_acryl_TMA is a superior ammonia storage/capture material.

An assessment of density functionals for predicting CO2 adsorption in diamine-functionalized metal-organic frameworks.

Diamine-functionalized M2(dobpdc) (M = Mg, Mn, Fe, Co, Zn) metal-organic frameworks (MOFs) are among a growing class of crystalline solids currently being intensively investigated for carbon capture as they exhibit a novel cooperative and selective CO2 adsorption mechanism and a step-shaped isotherm. To understand their CO2 adsorption behavior, ab initio calculations with near-chemical accuracy (∼6 kJ/mol, an average experimental error) are required. Here, we present density functional theory (DFT) calculations of CO2 adsorption in m-2-m-Zn2(dobpdc) (m-2-m = N,N'-dimethylethyle-nediamine and dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) with different exchange-correlation functionals, including semilocal functionals [Perdew-Burke-Ernzerhof (PBE) and two revised PBE functionals], semiempirical pairwise corrections (D3 and Tkatchenko-Scheffler), nonlocal van der Waals (vdW) correlation functionals-vdW-optB88 (or vdW-DF-optB88), vdW-DF1, vdW-DF2, vdW-DF2-B86R (or rev-vdW-DF2), vdW-DF-cx (and vdW-DF-cx0), and revised VV10-and the strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (GGA). Overall, we find that revPBE+D3 and RPBE+D3 show the best balance of performance for both the lattice parameters and the CO2 binding enthalpy of m-2-m-Zn2(dobpdc). revPBE+D3 and RPBE+D3 predict the m-2-m-Zn2(dobpdc) lattice parameters to within 1.4% of experiment and predict CO2 binding enthalpies of -68 kJ/mol, which compare reasonably well with the experiment (-57 kJ/mol). Although PBE (-57.7 kJ/mol), vdW-DF1 (-49.6 kJ/mol), and vdW-DF2 (-44.3 kJ/mol) are also found to predict the CO2 binding enthalpy with good accuracy, they overestimate lattice parameters and bond lengths. The other functionals considered predict the lattice parameters with the same accuracy as revPBE+D3 and RPBE+D3, but they overbind CO2 by around 26-50 kJ/mol. We find that the superior performance of revPBE+D3 and RPBE+D3 is sustained for the formation enthalpy and the lattice parameters of ammonium carbamate, a primary product of the cooperative CO2 insertion in diamine-functionalized M2(dobpdc) MOFs. Moreover, we find that their performance is derived from their larger repulsive exchange contributions to the CO2 binding enthalpy than the other functionals at the relevant range of the reduced density gradient value for the energetics of CO2 adsorption in the m-2-m-Zn2(dobpdc) MOF. A broader examination of the performance of RPBE+D3 for the structural parameters and CO2 binding enthalpies of 13 diamine-functionalized Mg2(dobpdc) MOFs further demonstrates that RPBE+D3 successfully reproduces experimental CO2 binding enthalpies and reveals a logarithmic relationship between the step pressure and the CO2 binding enthalpy of the diamine-functionalized Mg2(dobpdc) MOFs, consistent with experiments where available. The results of our benchmarking study can help guide the further development of versatile vdW-corrected DFT methods with predictive accuracy.

A prospective clinical evaluation of a patient isolation hood during the COVID-19 pandemic.

BACKGROUND: Healthcare workers (HCWs) have frequently become infected with severe acute respiratory syndrome coronavirus 2 whilst treating patients with coronavirus disease 2019 (COVID-19). A variety of novel devices have been proposed to reduce COVID-19 cross-contamination. OBJECTIVES: The aim of the study was (i) to test whether patients and HCWs thought that a novel patient isolation hood was safe and comfortable and (ii) to obtain COVID-19 infection data of hospital HCWs. METHODS: This is a prospective cohort study of 20 patients, entailing HCW/patient questionnaires and safety aspects of prototype isolation hoods. COVID-19 data of HCWs were prospectively collected. Assessment of the hood's safety and practicality and adverse event reporting was carried out. OUTCOME MEASURES: The outcome measures are as follows: questionnaire responses, adverse event reporting, rates of infections in HCWs during the study period (20/6/2020 to 21/7/2020), and COVID-19 infections in HCWs reported until the last recorded diagnosis of COVID-19 in HCWs (20/6/2020 to 27/9/2020). RESULTS: Of the 64 eligible individual HCW surveys, 60 surveys were overall favourable (>75% questions answered in favour of the isolation hood). HCWs were unanimous in perceiving the hood as safe (60/60), preferring its use (56/56), and understanding its potential COVID-19 cross-contamination minimisation (60/60). All eight patients who completed the questionnaire thought the isolation hood helped prevent COVID-19 cross infection and was safe and comfortable. There were no reported patient safety adverse events. The COVID-19 attack rate from 20/6/2020 to 27/9/2020 among registered nurses was as follows: intensive care units (ICUs), 2.2% (3/138); geriatric wards, 13.2% (26/197); and COVID-19 wards, 18.3% (32/175). The COVID-19 attack rate among medical staff was as follows: junior staff, 2.1% (24/932); senior staff, 0.7% (4/607); aged care/rehabilitation, 6.7% (2/30); and all ICU medical staff, 8.6% (3/35). CONCLUSIONS: The isolation hood was preferred to standard care by HCWs and well tolerated by patients, and after the study, isolation hoods became part of standard ICU therapy. There was an association between being an ICU nurse and a low COVID-19 infection rate (no causality implied). ICU HCWs feel safer when treating patients with COVID-19 using an isolation hood.

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation-Resistant Cyclodextrin-Based Metal-Organic Frameworks.

Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine-based sorbents-the current leading technology-is poor stability towards O2 . Here, we demonstrate that CO2 chemisorption in γ-cylodextrin-based metal-organic frameworks (CD-MOFs) occurs via HCO3 - formation at nucleophilic OH- sites within the framework pores, rather than via previously proposed pathways. The new framework KHCO3 CD-MOF possesses rapid and high-capacity CO2 uptake, good thermal, oxidative, and cycling stabilities, and selective CO2 capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO3 CD-MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH- sites within a porous framework represents a potentially general strategy for the design of oxidation-resistant adsorbents for CO2 capture.

Fluoroarene Separations in Metal-Organic Frameworks with Two Proximal Mg2+ Coordination Sites.

Fluoroarenes are widely used in medicinal, agricultural, and materials chemistry, and yet their production remains a critical challenge in organic synthesis. Indeed, the nearly identical physical properties of these vital building blocks hinders their purification by traditional methods, such as flash chromatography or distillation. As a result, the Balz-Schiemann reaction is currently employed to prepare fluoroarenes instead of more atom-economical C-H fluorination reactions, which produce inseparable mixtures of regioisomers. Herein, we propose an alternative solution to this problem: the purification of mixtures of fluoroarenes using metal-organic frameworks (MOFs). Specifically, we demonstrate that controlling the interaction of fluoroarenes with adjacent coordinatively unsaturated Mg2+ centers within a MOF enables the separation of fluoroarene mixtures with unparalleled selectivities. Liquid-phase multicomponent equilibrium adsorption data and breakthrough measurements coupled with van der Waals-corrected density functional theory calculations reveal that the materials Mg2(dobdc) (dobdc4- = 2,5-dioxidobenzene-1,4-dicarboxylate) and Mg2(m-dobdc) (m-dobdc4- = 2,4-dioxidobenzene-1,5-dicarboxylate) are capable of separating the difluorobenzene isomers from one another. Additionally, these frameworks facilitate the separations of fluoroanisoles, fluorotoluenes, and fluorochlorobenzenes. In addition to enabling currently unfeasible separations for the production of fluoroarenes, our results suggest that carefully controlling the interaction of isomers with not one but two strong binding sites within a MOF provides a general strategy for achieving challenging liquid-phase separations.

Overcoming Metastable CO2 Adsorption in a Bulky Diamine-Appended Metal-Organic Framework.

Carbon capture at fossil fuel-fired power plants is a critical strategy to mitigate anthropogenic contributions to global warming, but widespread deployment of this technology is hindered by a lack of energy-efficient materials that can be optimized for CO2 capture from a specific flue gas. As a result of their tunable, step-shaped CO2 adsorption profiles, diamine-functionalized metal-organic frameworks (MOFs) of the form diamine-Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) are among the most promising materials for carbon capture applications. Here, we present a detailed investigation of dmen-Mg2(dobpdc) (dmen = 1,2-diamino-2-methylpropane), one of only two MOFs with an adsorption step near the optimal pressure for CO2 capture from coal flue gas. While prior characterization suggested that this material only adsorbs CO2 to half capacity (0.5 CO2 per diamine) at 1 bar, we show that the half-capacity state is actually a metastable intermediate. Under appropriate conditions, the MOF adsorbs CO2 to full capacity, but conversion from the half-capacity structure happens on a very slow time scale, rendering it inaccessible in traditional adsorption measurements. Data from solid-state magic angle spinning nuclear magnetic resonance spectroscopy, coupled with van der Waals-corrected density functional theory, indicate that ammonium carbamate chains formed at half capacity and full capacity adopt opposing configurations, and the need to convert between these states likely dictates the sluggish post-half-capacity uptake. By use of the more symmetric parent framework Mg2(pc-dobpdc) (pc-dobpdc4- = 3,3'-dioxidobiphenyl-4,4'-dicarboxylate), the metastable trap can be avoided and the full CO2 capacity of dmen-Mg2(pc-dobpdc) accessed under conditions relevant for carbon capture from coal-fired power plants.

The Prognostic Value of Sex-Determining Region Y-Box 2 and CD8+ Tumor-Infiltrating Lymphocytes in Limited-Stage Small-Cell Lung Cancer.

BACKGROUND: Sex-determining region Y-box 2 (SOX2) is a transcriptional factor that drives embryonic stem cells to neuroendocrine cells in lung development and is highly expressed in small-cell lung cancer (SCLC). However, the prognostic role of SOX2 and its relationship with tumor-infiltrating lymphocytes (TILs) has not been determined in SCLC. Herein, we assessed the expression of SOX2 and CD8+ TILs to obtain insights into the prognostic role of SOX2 and CD8+ TILs in limited-stage (LS)-SCLC. METHODS: A total of 75 patients with LS-SCLC was enrolled. The SOX2 expression and CD8+ TILs were evaluated by immunohistochemistry. RESULTS: High SOX2 and CD8+ TIL levels were identified in 52 (69.3%) and 40 (53.3%) patients, respectively. High SOX2 expression was correlated with increased density of CD8+ TILs (p = 0.041). Unlike SOX2, high CD8+ TIL numbers were associated with significantly longer progression-free survival (PFS; 13.9 vs. 8.0 months, p = 0.014). Patients with both high SOX2 expression and CD8+ TIL numbers (n = 29, 38.7%) had significantly longer PFS and overall survival (OS) compared to those from the other groups (median PFS 19.3 vs. 8.4 months; p = 0.002 and median OS 35.7 vs. 17.4 months; p = 0.004, respectively). Multivariate Cox regression analysis showed that the combination of high SOX2 expression and CD8+ TIL levels was an independent good prognostic factor for OS (HR = 0.471, 95% CI, 0.250-0.887, p = 0.02) and PFS (HR = 0.447, 95% CI, 0.250-0.801, p = 0.007) in SCLC. CONCLUSIONS: Evaluation of the combination of SOX2 and CD8+ TIL levels may be of a prognostic value in LS-SCLC.