ABSTRACT
Monolithic perovskite/silicon tandem solar cells have been attracted much attention in recent years. Despite their high performances, the stability issue of perovskite-based devices is recognized as one of the key challenges to realize industrial application. When comes to the perovskite top subcell, the interface between perovskite and electron transporting layers (usually C60) significantly affects the device efficiency as well as the stability due to their poor adhesion. Here, different from the conventional interfacial passivation using metal fluorides, a hybrid intermediate layer is proposed-PMMA functionalized with ionic liquid (IL)-is introduced at the perovskite/C60 interface. The application of PMMA essentially improves the interfacial stability due to its strong hydrophobicity, while adding IL relieves the charge accumulation between PMMA and the perovskite. Thus, an optimal wide-bandgap perovskite solar cells achieves power conversion efficiency of 20.62%. These cells are further integrated as top subcells with silicon bottom cells in a monolithic tandem structure, presenting an optimized PCE up to 27.51%. More importantly, such monolithic perovskite/silicon cells exhibit superior stability by maintaining 90% of initial efficiency after 1200 h under continuous illumination.
ABSTRACT
Hepatocellular carcinoma (HCC) contributes to cancer-related deaths greatly every year in the world. However, there is still no radical method for HCC treatment. Here we screened out a lncRNA FABP5P3 that was up-regulated in HCC tissues. Patients with higher FABP5P3 expression displayed poorer survival rate. FABP5P3 depletion in HCC cell lines and sample cells remarkably inhibited the abilities of proliferation, migration and invasion. In mechanism, we showed that FABP5P3 bond to miR-589-5p which served as a tumor suppressor. MiR-589-5p targeted directly the mRNA of ZMYND19 whose function has not been defined in HCC. FABP5P3 promoted HCC development and progression by sponging miR-589-5p and up-regulating ZMYND19 expression. In sum, we showed that FABP5P3/miR-589-5p/ZMYND19 axis regulates cell proliferation and migration in HCC, which may serve as a new target for HCC treatment.
Subject(s)
Carcinoma, Hepatocellular/genetics , Carrier Proteins/genetics , Gene Expression Regulation, Neoplastic , Liver Neoplasms/genetics , MicroRNAs/genetics , Neoplasm Invasiveness/genetics , RNA, Long Noncoding/genetics , Animals , Carcinoma, Hepatocellular/pathology , Cell Line, Tumor , Cell Movement , Cell Proliferation , Disease Progression , Humans , Liver Neoplasms/pathology , Mice, Inbred BALB C , Mice, Nude , Neoplasm Invasiveness/pathology , Signal TransductionABSTRACT
Amindoximes are geometric isomers of N-hydroxyamidines which are bioisosteres of hydroxamates. Since amindoxime group is capable of chelating transition metal ions including zinc ion, amindoximes should possess histone deacetylases (HDACs) inhibitory activity. In this work, we designed and synthesized a series of amindoximes, examined their inhibitory activities against HDACs, and investigated their cytotoxicity to human cancer cells. Preliminary results demonstrated that amindoximes possessed submicromolar HDACs inhibitory activity, with noteworthy enhancement compared with hydroxamates. Furthermore, the amindoximes arrested HCT116 and A549 cells in G2/M phase and showed good efficacy in inducing cells death. We provided a proof-of-concept that amindoximes could be used as HDACs inhibitors and hold great promise as epigenetic drugs.
Subject(s)
Histone Deacetylase Inhibitors/pharmacology , Neoplasms/drug therapy , Oximes/pharmacology , Histone Deacetylase Inhibitors/chemistry , Humans , In Vitro Techniques , Oximes/chemistryABSTRACT
Wide-bandgap metal halide perovskites have demonstrated promise in multijunction photovoltaic (PV) cells. However, photoinduced phase segregation and the resultant low open-circuit voltage (Voc) have greatly limited the PV performance of perovskite-based multijunction devices. Here, a alloying strategy is reported to achieve uniform distribution of triple cations and halides in wide-bandgap perovskites by doping Rb+ and Cl- with small ionic radii, which effectively suppresses halide phase segregation while promoting the homogenization of surface potential. Based on this strategy, a Voc of 1.33 V is obtained from single-junction perovskite solar cells, and a VOC approaching 3.0 V and a power conversion efficiency of 25.0% (obtained from reverse scan direction, certified efficiency: 24.19%) on an 1.04 cm2 photoactive area can be achieved in a perovskite/perovskite/c-Si triple-junction tandem cell, where the certification efficiency is by far the greatest performance of perovskite-based triple-junction tandem solar cells. This work overcomes the performance deadlock of perovskite-based triple-junction tandem cells by setting a materials-by-design paradigm.
ABSTRACT
To date, the improvement of open-circuit voltage (VOC ) offers a breakthrough for the performance of perovskite solar cells (PSCs) toward their theoretical limit. Surface modification through organic ammonium halide salts (e.g., phenethylammonium ions PEA+ and phenmethylammonium ions PMA+ ) is one of the most straightforward strategies to suppress defect density, thereby leading to improved VOC . However, the mechanism underlying the high voltage remains unclear. Here, polar molecular PMA+ is applied at the interface between perovskite and hole transporting layer and a remarkably high VOC of 1.175 V is obtained which corresponds to an increase of over 100 mV in comparison to the control device. It is revealed that the equivalent passivation effect of surface dipole effectively improves the splitting of the hole quasi-Fermi level. Ultimately the combined effect of defect suppression and surface dipole equivalent passivation effect leads to an overall increase in significantly enhanced VOC . The resulted PSCs device reaches an efficiency of up to 24.10%. Contributions are identified here by the surface polar molecules to the high VOC in PSCs. A fundamental mechanism is suggested by use of polar molecules which enables further high voltage, leading ways to highly efficient perovskite-based solar cells.
ABSTRACT
Halide perovskites have shown superior potentials in flexible photovoltaics due to their soft and high power-to-weight nature. However, interfacial residual stress and lattice mismatch due to the large deformation of flexible substrates have greatly limited the performance of flexible perovskite solar cells (F-PSCs). Here, ammonium formate (HCOONH4 ) is used as a pre-buried additive in electron transport layer (ETL) to realize a bottom-up infiltration process for an in situ, integral modification of ETL, perovskite layer, and their interface. The HCOONH4 treatment leads to an enhanced electron extraction in ETL, relaxed residual strain and micro-strain in perovskite film, along with reduced defect densities within these layers. As a result, a top power conversion efficiency of 22.37% and a certified 21.9% on F-PSCs are achieved, representing the highest performance reported so far. This work links the critical connection between multilayer mechanics/defect profiles of ETL-perovskite structure and device performance, thus providing meaningful scientific direction to further narrowing the efficiency gap between F-PSCs and rigid-substrate counterparts.
ABSTRACT
NiOx-based perovskite solar cells (PSCs) have attracted much attention because of their low fabrication temperature, suppressed hysteresis, and superior stability. However, the poor interfacial contacts between NiOx and perovskite layers always limit the progress of PSCs. Here, we applied 2-thiophenemethylamine (TPMA) as charge transport channels at the interface between NiOx and perovskite layers. The introduction of TPMA provides moderate dipole moment pointing to the perovskite side and effectively promotes the charge transportation. Meanwhile, TPMA anchorage also passivates the defect states at the surfaces of both NiOx and MAPbI3, which compensates the voltage loss due to the change in NiOx work function induced by the dipole. Thus, the device performance has been significantly enhanced in both electrochemical properties and power conversion efficiency. Our work has demonstrated a new way of improving current and voltage in the NiOx-based PSCs simultaneously through a moderate interfacial dipole moment toward highly efficient PSCs.
ABSTRACT
Perovskite/silicon tandem solar cells are promising avenues for achieving high-performance photovoltaics with low costs. However, the highest certified efficiency of perovskite/silicon tandem devices based on economically matured silicon heterojunction technology (SHJ) with fully textured wafer is only 25.2% due to incompatibility between the limitation of fabrication technology which is not compatible with the production-line silicon wafer. Here, a molecular-level nanotechnology is developed by designing NiOx /2PACz ([2-(9H-carbazol-9-yl) ethyl]phosphonic acid) as an ultrathin hybrid hole transport layer (HTL) above indium tin oxide (ITO) recombination junction, to serve as a vital pivot for achieving a conformal deposition of high-quality perovskite layer on top. The NiOx interlayer facilitates a uniform self-assembly of 2PACz molecules onto the fully textured surface, thus avoiding direct contact between ITO and perovskite top-cell for a minimal shunt loss. As a result of such interfacial engineering, the fully textured perovskite/silicon tandem cells obtain a certified efficiency of 28.84% on a 1.2-cm2 masked area, which is the highest performance to date based on the fully textured, production-line compatible SHJ. This work advances commercially promising photovoltaics with high performance and low costs by adopting a meticulously designed HTL/perovskite interface.
ABSTRACT
Usage of nonhalide lead sources for fabricating perovskite solar cells (PSCs) has recently attracted increasing attention as a promising route toward realizing high quality PSC devices. However, the unique role of nonhalide lead sources in improving perovskite film morphology and PSC performance has largely remained unexplored, impeding broader application of these materials. Here, it is demonstrated that by using a new nonhalide lead source, lead formate (Pb(HCOO)2), good control of perovskite film morphology can be achieved. With the usage of lead formate, PbI2 can nicely border the perovskite grain boundaries (GBs) and form domain "walls" that segregate the individual perovskite crystal domains. The PbI2 at the GBs lead to significant improvement in film quality and device performance through passivating the defects at the perovskite GBs and suppressing lateral carrier diffusion. An impressive carrier lifetime at the microsecond scale (τ 2 = 1714 ns) is achieved, further with an optimal power conversion efficiency of 20.3% for the resulting devices. This work demonstrates a promising and effective method toward fabricating high-quality perovskites and high-efficiency PSCs.
ABSTRACT
CdSe single crystals (SCs), with a relatively high atomic number, large X-ray absorption coefficients, and high carrier mobility, are expected to provide high-performance detection for X-ray. However, the difficulty of growing high-quality CdSe SC has severely limited its application in X-ray detection. In this work, we develop an unconstrained physical gas phase method and in situ annealing process to grow high-quality CdSe SCs under unconstrained conditions. Using this method, CdSe SCs exhibit natural exposure planes, ultrahigh resistivity of 5.43 × 1012 to 1.29 × 1013 Ω cm and high µτ product of 1.3 × 10-2 to 1.5 × 10-2 cm2 V-1. It is also observed that CdSe SC X-ray detectors exhibit a record sensitivity of 2.08 × 105 µC Gyair-1 cm-2 and a low detection limit of 85 nGyair s-1, which are both desired in medical diagnostics. Moreover, those devices with different crystal directions provide anisotropic X-ray detection performance. Our findings pave a new avenue to exploit high-performance CdSe SC X-ray detectors.
ABSTRACT
Additive engineering has become increasingly important for making high-quality perovskite solar cells (PSCs), with a recent example involving acid during fabrication of cesium-based perovskites. Lately, it has been suggested that this process would introduce dimethylammonium ((CH3)2NH2+, DMA+) through hydrolysis of the organic solvent. However, material composition of the hydrolyzed product and its effect on the device performance remain to be understood. Here, we present an in-depth investigation of the hydrolysis-derived material (i.e., DMAPbI3) and detailed analysis of its role in producing high-quality PSCs. By varying the ratio of CsI/DMAPbI3 in the precursor, we achieve high-quality CsxDMA1-xPbI3 perovskite films with uniform morphology, low density of trap states, and good stability, leading to optimized power conversion efficiency up to 14.3%, with over 85% of the initial efficiency retained after â¼20 days in air without encapsulation. Our findings offer new insights into producing high-quality Cs-based perovskite materials.
ABSTRACT
Based on highly ordered TiO2 nanotube arrays (NTAs), we successfully fabricated the Cu2O-TiO2 NTA heterojunction by a simple thermal decomposition process for the first time. The anodic TiO2 NTAs were functioned as both "nano-container" and "nano-reactors" to load and synthesize the narrow band Cu2O nanoparticles. The loaded Cu2O expanded absorption spectrum of the TiO2 NTAs from ultraviolent range to visible light range. We found that the Cu2O-TiO2 NTA heterojunction films had visible activity towards photocatalytic degrading methyl orange (MO). The photocatalytic abilities of the Cu2O-TiO2 NTA heterojunction films were found increased with the Cu2O content from 0.05 to 0.3 mol/L. This could be explained by more electron-hole pairs generated and less recombination, when the Cu2O-TiO2 heterojunction got formed. Here, we put forward this promising method, hoping it can facilitate the mass production and applications of Cu2O-TiO2 NTA heterojunction.
ABSTRACT
Inorganic CsPbI3 perovskites have shown promising potential for achieving all-inorganic photovoltaic (PV) devices. However, the black perovskite polymorph (α-phase) of CsPbI3 easily converts into yellow colour (δ-phase) in an ambient environment and it is only stable at high temperature (above 320 °C), which limits its practical application. Here we tailor the three-dimensional CsPbI3 perovskite into quasi-two-dimension through adding a large radius cation phenylethylammonium (PEA+). The incorporation of PEA+ into the CsPbI3 perovskite significantly improves the film morphology as well as the phase stability. An optimal CsxPEA1-xPbI3 perovskite film remains stable in the α-phase from room temperature to 250 °C in air and yields a power conversion efficiency of 5.7% for its solar device. The concept of using large radius cations in the 3D perovskite system provides a new perspective to further enhance the phase stability while retaining the device performance.
ABSTRACT
Fe3O4 nanoplates were fabricated by an anodic oxidation process and a subsequent water assisted crystallization process at low temperature, which was found to be very efficient and environmentally friendly. The as-prepared Fe3O4 nanoplates have hexagonal outlines with a thickness of about 20 nm. Tremendous grooves were distributed on the entire surfaces of the nanoplates, making the two-dimension nanoplates have a unique 3D morphology. Transmission electron microscopy results confirmed that the single-crystalline nature of the nanoplates was well maintained. Owing to the unique structures and porous morphologies, the as-prepared 3D nanoplates show excellent ability for absorbing solar energy and absorbing organic pollutants, which can be utilized for cleaning up water. Moreover, the Fe3O4 nanoplates show good magnetic properties that enable them to be easily collected and recycled. We believe this study will inspire the application of Fe3O4 nanoplates with 3D structures in energy and environmental areas.
ABSTRACT
Laser irradiation as a rapid crystallization approach was successfully introduced to prepare homogeneous, dense-grained CH3NH3PbI3 films. Planar-heterojunction solar cells employing these high-quality films showed the optimal efficiency of 17.8% with a remarkably high open-circuit voltage of 1.146 V.
ABSTRACT
A dense and homogenous flat wide-bandgap (1.75 eV) CH3NH3PbI2.1Br0.9 perovskite film was prepared via a facile halide exchange route. The planar-heterojunction solar cell shows an optimal power conversion efficiency of 12.67% with negligible current hysteresis due to the film's large grains and vertically oriented grain boundaries.
ABSTRACT
Large organolead triiodide perovskite (OTP) grains with little intragranular defects are beneficial to minimize carrier recombination, hence boosting cell performance. However, OTP films deposited by the widely used one-step spin-coating route are usually composed of small grains, because the poor thermal stability of OTP inherently restricts the processing window (temperature, time) during the film preparation, thus limiting grain coarsening in the film. Herein, the remarkable grain coarsening via Ostwald ripening in one-step deposited OTP films has been successfully realized by a facile and effective post-synthesis high-temperature heating treatment assisted with spin-coated CH3NH3I. By systematically investigating the heating treatment parameters, a high-quality OTP film with an enlarged average grain size from â¼280 nm to 1.2 µm, greatly enhanced crystallinity, and excellent stoichiometry is achieved. Benefiting from such improved features, this modified film shows significantly reduced defect states corresponding to the decrease of recombination centers, as well as enhanced carrier transport and injection properties, which lead to the dramatically boosted efficiency from 14.54% to 16.88% for planar-heterojunction solar cells. More importantly, the improved OTP film quality provides the possibility of thickening the absorber layer of cells to realize more sufficient absorption without serious aggravation of charge recombination. By further optimizing the thickness of the coarsened OTP films, highly efficient cells with relatively excellent reproducibility and an optimal efficiency of 19.24% are achieved.
ABSTRACT
Although nanomaterials have been widely investigated for drug delivery, imaging and immunotherapy, their potential roles in triggering innate cellular immune responses while simultaneously serving as imaging enhancer remain unexplored. In this work, gold nanoparticles (GNPs) conjugated to the tumor-targeting anti-GD2 antibody hu14.18K322A, namely HGNPs, were designed and synthesized to specifically enhance computerized tomography (CT) imaging contrast and to stimulate the attack of neuroblastoma and melanoma cells by natural killer (NK) cells. The HGNPs specifically targeted GD2-positive neuroblastoma (NB1691) and melanoma (M21) cells, with an enhancement of CT contrast images of the HGNP-labeled cell pellets by 5.27- and 7.66-fold, respectively, compared to images of unlabeled cell pellets. The HGNPs also triggered NK-mediated antibody-dependent cellular cytotoxicity (ADCC) in NB1691 and M21 cells with a two-fold higher efficacy compared to that elicited by hu14.18K322A alone, with no adverse effect to GD2-negative PC-3 cells. These results suggest that HGNPs are promising theranostic agents for neuroblastoma and melanoma cancers.
ABSTRACT
Organolead trihalide perovskites (OTPs) such as CH3NH3PbI3 (MAPbI3) have attracted much attention as the absorbing layer in solar cells and photodetectors (PDs). Flexible OTP devices have also been developed. Transparent electrodes (TEs) with higher conductivity, stability, and flexibility are necessary to improve the performance and flexibility of flexible OTP devices. In this work, patterned Au nanowire (AuNW) networks with high conductivity and stability are prepared and used as TEs in self-powered flexible MAPbI3 PDs. These flexible PDs show peak external quantum efficiency and responsivity of 60% and 321 mA/W, which are comparable to those of MAPbI3 PDs based on ITO TEs. The linear dynamic range and response time of the AuNW-based flexible PDs reach â¼84 dB and â¼4 µs, respectively. Moreover, they show higher flexibility than ITO-based devices, around 90%, and 60% of the initial photocurrent can be retained for the AuNW-based flexible PDs when bent to radii of 2.5 and 1.5 mm. This work suggests a high-performance, highly flexible, and stable TE for OTP flexible devices.