ABSTRACT
Centella asiatica (L.) Urban is a famous Chinese traditional medicine, which is widely used for treating various chronic inflammatory diseases. Although there are reports that Centella total glycosides exhibit heart-protective properties, our previous experiment showed that it has cardiac toxic effects in zebrafish. The components of Centella total glycosides are complex, so we recommend further research to determine their key components and mechanisms. In this study, sample quantification was done using liquid chromatography-tandem mass spectrometry. The cardiotoxicity of Centella total glycosides, asiaticoside, madecassoside, asiatic acid, and madecassic acid was evaluated using zebrafish and cell models. The zebrafish oxidative stress model and myocarditis model were used to explore further the mechanisms through which cardiotoxicity is achieved. Asiatic acid and madecassic acid caused zebrafish cardiotoxicity and H9C2 cell death. However, no toxicity effects were observed for asiaticoside and madecassoside in zebrafish, until the solution was saturated. The results from the cell model study showed that asiatic acid and madecassic acid changed the expression of apoptosis-related genes in myocardial cells. In the zebrafish model, high concentrations of these components raised the levels of induced systemic inflammation, neutrophils gathered in the heart, and oxidative stress injury. Asiatic acid and madecassic acid are the main components causing cardiotoxicity in zebrafish. This may be due to enhanced inflammation and reactive oxygen species injury, which causes myocardial cell apoptosis, which further leads to cardiac toxicity.
Subject(s)
Cardiotoxicity , Centella , Inflammation , Oxidative Stress , Pentacyclic Triterpenes , Reactive Oxygen Species , Triterpenes , Zebrafish , Animals , Triterpenes/pharmacology , Reactive Oxygen Species/metabolism , Oxidative Stress/drug effects , Inflammation/chemically induced , Centella/chemistry , Apoptosis/drug effects , Myocarditis/chemically induced , Myocytes, Cardiac/drug effects , Myocytes, Cardiac/metabolism , Myocytes, Cardiac/pathology , Cell LineABSTRACT
We have proposed a tunable topological slow-light in a photonic crystal (PC) waveguide with unified magnetic field. The waveguide is constructed by bringing close two gyromagnetic photonic crystals (GPCs) with different structural parameters and introducing a row of Al2O3 rods as the coupling layer. The two GPCs are applied with a unified external static magnetic field (ESMF) instead of two opposite ESMFs. Such waveguide supports a slow-light state originated from the coupling effect of two one-way edge states on both sides of the waveguide. By simply changing the strength of ESMF, one can achieve a tunable slow-light state with large normalized delay-bandwidth product (NDBP) (0.36< NDBP <0.84). Based on these excellent properties, we further design an optical delayer with a compact structure and expansibility simultaneously. This unique topological slow-light state with simple unified magnetic condition, high maneuverability and strong immunity to defects holds promise for many fields such as signal processing, optical modulation, and the design of various slow-light devices.
ABSTRACT
We present mode conversion in different magneto-optical photonic crystal (MOPC) waveguides. An odd-mode waveguide (OMW) and an even-mode waveguide (EMW) are designed by adjusting the geometric parameters of the waveguide. These waveguides are constructed by adding a layer of yttrium-iron-garnet (YIG) rods with opposing magnetic fields between an MOPC and an Al2O3 photonic crystal (PC). Due to the coupling effect caused by the middle layer of YIG rods, the OMW (or EMW) only supports an odd (or even) mode within a single-mode frequency range. Simulation results demonstrate that they can convert other modes into odd or even modes, and there is almost no power loss during the conversion. Most importantly, they are robust against backscattering from perfect electric conductors (PECs) and point defects. Based on these properties, we propose a device that can efficiently separate the odd and even modes into different ports. These results offer a novel approach to controlling the transmission modes of waveguides, which facilitates the interconnection of diverse topological magneto-optical waveguides.
ABSTRACT
We have presented adjustable enhanced Goos-Hänchen (GH) shift in a magneto-optical photonic crystal (MOPC) waveguide. The waveguide consists of a top layer of ferrite rods and a lower MOPC with opposite biased dc external magnetic fields (EMFs), and it supports both odd-like and even-like modes simultaneously. The simulation results show the odd-like mode can cause an enhanced negative GH shift, while the even-like mode can result in an enhanced positive GH shift. The physical reason for such negative and positive GH shifts is attributed to the efficient mode coupling and propagation behaviors of the electromagnetic (EM) wave in the waveguide. Furthermore, we have realized the switchable negative/positive GH shift by altering the direction combination of the EMFs. In addition, the magnitudes of both GH shifts can be adjusted by changing the strength of EMF or the width of the waveguide. These results provide new ways to control the transmission behaviors of EM wave and hold promise in applications such as detections, optical switches, and sensors.
ABSTRACT
We have proposed a controllable topological add-drop filter (ADF) by utilizing the one-way transmission property and resonant coupling effect of topological photonic states in magneto-optical photonic crystal (MOPC) system. The ADF is symmetrically constructed by a central ring resonator (RR) with each side a MO microcavity and a topological waveguide formed by MOPC/Al2O3 PCs. The topological waveguide supports one-way transmission and the microcavity is used to adjust resonant frequency and improve filtering performance. Based on the symmetry of structure and the adjustability of magnetic field, the input and output ports can be reconfigured conveniently to realize the dropping and adding functions of the ADF. Such an ADF possesses merits of nearly perfect filtering performance, convenient adjustability of resonance mode, and strong robustness against various defects. Moreover, we further design an optical demultiplexer consisting of two PCRRs which is able to separate two different resonant modes independently and efficiently. These results hold promise in many fields such as optical communications and wavelength-division multiplexing.
ABSTRACT
We have studied the coupling effect of topological photonic states in a double-channel magneto-optical photonic crystal waveguide by introducing a two-stranded ordinary Al2O3 photonic crystal as the coupling layer. There exist both M1 (odd) and M2 (even) one-way modes simultaneously in the bandgap. Interestingly, M1 mode is always a fast-light mode with large group velocity (vg) and large group velocity dispersion (GVD) regardless what the radius (RA) of Al2O3 rods is. However, when RA is appropriate, M2 mode becomes a very slow-light mode exhibiting near-zero vg and zero GVD simultaneously. The physical reason of such slow-light is attributed to the strong coupling effect between the one-way edge modes in both sub-waveguides. Furthermore, the simulation results show that the robustness of both the fast- and slow-light modes are extremely strong against perfect electric conductor defect and the one-way transmittance is close to 100%. Besides, the PEC defect can cause significant phase delay. These results hold promise for many fields such as signal processing, optical modulation, and the design of various topological devices.
ABSTRACT
We present a scheme to realize topological slow-light state with low group velocity and vanishing group velocity dispersion. By harnessing the strong interactions between two regular co-propagating topological photonic states in a magneto-optical photonic crystal waveguide, the energy flux transport of light exhibits a peculiar eight-shaped flowing loop within each unit cell of the waveguide. This permits the broadband pulse transporting with low group velocity (ng=13.26), broad bandwidth with a relative bandwidth of 3.08%, large normalized delay-bandwidth product (about 0.409), and vanishing group velocity dispersion. More importantly, they are robust against backscattering from obstacles. Our scheme paves the way to dig into the concept and physics of topology for solving the difficult problems of signal distortion and scattering loss in slow-light systems.
ABSTRACT
We theoretically study the topological transition of dispersion types and propose a tunable planar lens based on graphene hyperbolic metamaterials (HMMs). By tuning the chemical potential (µc) of graphene, the dispersion relation of the HMM is topologically switchable between ellipse (µc<0.6 eV) and hyperbola (µc>0.6 eV) where positive and negative refractions occur respectively. Especially, for µc>0.6 eV, a Gaussian light beam is negatively refracted twice and focuses at a far-field point finally, acting well as a planar lens. Furthermore, its focal length l can be sensitively tuned by controlling µc, and Δl reaches 260 µm (from 528 to 268 µm) while µc varies with only 0.05 eV (from 0.65 to 0.7 eV). The physical reason is attributed to the different anisotropy degrees of EFCs for different µc. Such a compact, high-speed, and sensitively tunable planar lens holds great promise in photonic integration, photonic imaging, and directional coupling applications.
ABSTRACT
We propose a controllable topological add-drop filter based on magnetic-optical photonic crystals. This add-drop filter is composed of two straight waveguides and a hexagonal photonic crystal ring resonator. The waveguide and ring resonator are constructed by three different honeycomb magnetic-optical photonic crystals. The expanded lattice is applied with an external magnetic field so that it breaks time-reversal symmetry and the analogous quantum spin Hall effect simultaneously. While the standard one and the compressed one are not magnetized and trivial, the straight waveguide supports pseudospin-down (or pseudospin-up) one-way states when the expanded lattice is applied with an external magnetic field of +H (or -H). The ring resonator possesses multiple resonant modes which can be divided into travelling modes and standing modes. By using the travelling modes, we have demonstrated the function of the add-drop filter and realized the output port control by changing the direction of the magnetic field. Moreover, a large tunable power ratio from near 0 to 52.6 is achieved by adjusting the strength of the external magnetic field. The structure has strong robustness against defects due to the topological protection property. These results have potential in wavelength division multiplexing systems and integrated topological optical devices.
ABSTRACT
Accurate monitoring of UV-filters exposure levels in human plasma is a challenge because of the significant differences in the physicochemical properties of UV-filters, as well as the matrix effect caused by abundant proteins and phospholipids in plasma. Therefore, an effective and rapid method for simultaneous determination of 14 UV-filters in human plasma using protein precipitation-solid phase extraction (SPE) coupled with liquid chromatography tandem mass spectrometry (LC-MS/MS) was developed. Acetonitrile with 0.1 % formic acid and 10 % isopropanol (v/v) were used as mobile phases. A gradient elution on an ACQUITY UPLC BEH-C18 column at 30 °C and 0.3 mL/min flow rate was applied for separation. The electrospray ionization positive or negative modes were selected to determine the corresponding analyte to increase selectivity and sensitivity. Results showed that acetonitrile-tetrahydrofuran (v/v, 8:2) as the extraction solvent can effectively precipitate protein in plasma and improve the solubility of UV-filters. The HybridSPE cartridge improved the removal efficiency of phospholipids, while 1 mL of methanol elution increased the extraction recoveries of targets. Fourteen UV-filters achieved good linearities, low detection limits (0.050 to 0.10 µg/L) and quantification limits (0.10 to 1.0 µg/L). Method accuracy and precision, extraction recoveries, and storage stabilities of all analytes met the criterion of 80-120 %. Moreover, this method was successfully applied for the determination of UV-filters in plasma randomly collected from adults. Nine of 14 UV-filters were determined and their concentrations were distributed widely, suggesting a big variation of individual UV-filters exposure.
Subject(s)
Phospholipids , Tandem Mass Spectrometry , Adult , Humans , Chromatography, Liquid/methods , Tandem Mass Spectrometry/methods , Chromatography, High Pressure Liquid/methods , Phospholipids/chemistry , Liquid Chromatography-Mass Spectrometry , Acetonitriles , Solid Phase Extraction/methodsABSTRACT
We theoretically proposed a topological multichannel add-drop filter (ADF) and studied its unique transmission properties. The multichannel ADF was composed of two one-way gyromagnetic photonic crystal (GPC) waveguides, a middle ordinary waveguide, and two square resonators sandwiched between them, which can be regarded as two paralleling four-port nonreciprocal filters. The two square resonators were applied with opposite external magnetic fields (EMFs) to support one-way states propagating clockwise and counterclockwise, respectively. On the basis of the fact that the resonant frequencies can be tuned by the EMFs applied to the square resonators, when the intensities of EMFs were the same, the multichannel ADF behaved as a power splitter with a 50/50 division ratio and high transmittance; otherwise, it functioned as a demultiplexer to separate two different frequencies efficiently. Such a multichannel ADF not only possesses excellent filtering performance but also has strong robustness against various defects due to its topological protection property. Moreover, each output port can be switched dynamically, and each transmission channel can operate independently with little crosstalk. Our results have the potential for developing topological photonic devices in wavelength division multiplexing systems.
ABSTRACT
Human exposure to polyfluoroalkyl substances (PFASs) via cosmetics has been of increasing concern due to the tremendous detrimental health impacts of PFASs. Developing an effective method for extracting and determining PFASs in cosmetics is crucial in accurately assessing their corresponding human exposure risk. Herein, this study developed a new sample pre-treatment method to address the challenges posed by the variety and complexity of cosmetic matrices. Seventeen PFASs in cosmetic products, including 9 perfluoro carboxylic acids and 8 perfluorosulfonic acids, were simultaneously determined using ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The whole pre-treatment process can be divided into three steps. In step 1, cosmetics with diverse matrix types can be effectively dispersed during extraction by using saturated sodium chloride-acetonitrile and saturated sodium chloride-tetrahydrofuran as extraction solvents. In step 2, the pre-purification step employs a potassium ferrocyanide-zinc acetate co-precipitant to remove high molecular weight interferents from the extraction solution, thereby enhancing the efficiency of solid-phase extraction (SPE). In step 3, WAX-SPE is utilized to further eliminate interferents from the extraction solution while concentrating the analytes, meeting the trace analysis requirements for PFASs in cosmetics. The method detection limits were 0.09-0.26 ng g-1. The recoveries ranged from 70.1% to 114.7%, with relative standard deviations in the range of 2.0-19.1%. The method was applied to cosmetic samples in the Guangzhou market, and the total concentration of PFASs ranged from 0 to 10.8 ng g-1. This method has strong anti-interference ability, good applicability, high sensitivity, and good reproducibility, making it suitable for the analysis and detection of perfluorinated acids in cosmetic samples. It provides technical support for cosmetics safety regulation.
Subject(s)
Fluorocarbons , Tandem Mass Spectrometry , Humans , Chromatography, High Pressure Liquid/methods , Tandem Mass Spectrometry/methods , Reproducibility of Results , Sodium Chloride/analysis , Fluorocarbons/analysis , Liquid-Liquid ExtractionABSTRACT
We have studied the transmission properties of odd/even one-way modes and their reversible conversion in a double-channel waveguide consisting of two magneto-optical photonic crystals (MOPCs) sandwiched with Al2O3 PC. There exist two pairs of even and odd modes, i.e., M1(even)/M2(odd) or M3(odd)/M4(even) modes, for the double-channel waveguides with one- or two-stranded coupling layer of Al2O3 rods, respectively. Among them, the M1, M2, and M3 modes are caused by the weak coupling strength of two sub-waveguides, while the M4 mode results from the strong coupling effect and supports dispersionless slow-light propagation. Furthermore, we realize the reversible conversion between odd and even modes (i.e., between M1 and M2 modes, or M3 and M4 modes) in the one- or two-stranded structure, respectively, by adjusting the length and position of the perfect electric conductor (PEC) defect properly to cause the desired significant phase delay along the upper and lower equivalent transmission paths. Additionally, we find that the robustness of the M1 even mode is poor because of extra excitations of counter-propagation modes near the right Brillouin boundary, while the other three modes have extremely strong robustness against PEC defects and their one-way transmittances are nearly 100%. These results hold promise for many fields, such as slow-light modulation and the design of topological devices.
ABSTRACT
ETHNOPHARMACOLOGICAL RELEVANCE: Glabridin, extracted from Glycyrrhiza glabra L., is widely used for the treatment of hyperpigmentation because of its anti-inflammatory and antioxidant activities and its ability to inhibit melanin synthesis. This led to the strict regulation of its quality and safety. However, traditional quality control methods used for plant extracts cannot reflect the product quality owing to multiple unknown impurities, which necessitates the further analysis of impurities. AIM OF THE STUDY: The study identified the toxic impurities of glabridin and their toxicological mechanism. MATERIALS AND METHODS: In total, 10 glabridin samples from different sources were quantified using high-performance liquid chromatography. Sample toxicities were evaluated using zebrafish and cell models. To identify impurities, samples with different toxicity were analyzed by ultra-high-performance liquid chromatography coupled with quadrupole-Orbitrap mass spectrometry. The toxicity of related impurities was verified in the zebrafish model. Phalloidin stain was used to evaluate subtle changes in myofibril alignment. RESULTS: Although glabridin content in the samples was similar, there were significant differences in toxicity. The results were verified using four different mammalian cell lines. Higher contents of glabrone and glabrol were identified in the sample with the highest toxicity. In the zebrafish model, the addition of glabrol reduced the LC50 of glabridin to 9.224, 6.229, and 5.370 µM at 48, 72, and 96 h post-fertilization, respectively, whereas glabrone did not have any toxic effect. Phalloidin staining indicated that a glabrol impurity exacerbates the myotoxicity of glabridin in zebrafish embryos. CONCLUSION: Glabrol, but not glabrone, was identified as a key impurity that increased glabridin toxicity. This finding indicates that controlling glabrol content is necessary during glabridin product production.
Subject(s)
Flavonoids/toxicity , Glycyrrhiza/chemistry , Isoflavones/toxicity , Myofibrils/drug effects , Phenols/toxicity , Animals , Cell Line , Cell Line, Tumor , Chromatography, High Pressure Liquid , Embryo, Nonmammalian/drug effects , Female , Flavonoids/chemistry , Humans , Isoflavones/chemistry , Male , Mass Spectrometry , Mice , Myofibrils/pathology , Phenols/chemistry , Plant Extracts/chemistry , Plant Extracts/toxicity , Quality Control , ZebrafishABSTRACT
We find that the angle between elementary lattice vectors obviously affects the bandwidth and dispersion of slow light in photonic crystal line-defect waveguides. When the fluctuation of group index is strictly limited in a +/-1% range, the oblique lattice structures with the angle between elementary lattice vectors slightly larger than 60 degrees have broader available bandwidth of flat band slow light than triangular lattice structures. For example, for the angle 66 degrees , there are increases of the available bandwidth from 20% to 68% for several different structures. For the same angle and a +/-10% variation in group velocity, when group indices are nearly constants of 30, 48.5, 80 and 130, their corresponding bandwidths of flat band reach 20 nm, 11.8 nm, 7.3 nm and 3.9 nm around 1550 nm, respectively. The increasing of bandwidth is related to the shift of the anticrossing point towards smaller wave numbers.