Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells.

A high-quality nanostructured tin oxide (SnO2) has garnered massive attention as an electron transport layer (ETL) for efficient perovskite solar cells (PSCs). SnO2 is considered the most effective alternative to titanium oxide (TiO2) as ETL because of its low-temperature processing and promising optical and electrical characteristics. However, some essential modifications are still required to further improve the intrinsic characteristics of SnO2, such as mismatch band alignments, charge extraction, transportation, conductivity, and interfacial recombination losses. Herein, an inorganic-based cesium (Cs) dopant is used to modify the SnO2 ETL and to investigate the impact of Cs-dopant in curing interfacial defects, charge-carrier dynamics, and improving the optoelectronic characteristics of PSCs. The incorporation of Cs contents efficiently improves the perovskite film quality by enhancing the transparency, crystallinity, grain size, and light absorption and reduces the defect states and trap densities, resulting in an improved power conversion efficiency (PCE) of ≈22.1% with Cs:SnO2 ETL, in-contrast to pristine SnO2-based PSCs (20.23%). Moreover, the Cs-modified SnO2-based PSCs exhibit remarkable environmental stability in a relatively higher relative humidity environment (>65%) and without encapsulation. Therefore, this work suggests that Cs-doped SnO2 is a highly favorable electron extraction material for preparing highly efficient and air-stable planar PSCs.

Suppression of Thermally Induced Surface Traps in Colloidal Quantum Dot Solids via Ultrafast Pulsed Light.

Thermal annealing (TA) of colloidal quantum dot (CQD) films is considered an important process for recent high-performing CQD solar cells (SCs) due to its beneficial effects on CQD solids, including enhanced electrical conductivity, denser packing of CQD films, and the removal of organic residues and solvents. However, the conventional TA for CQDs, which requires several  minutes, leads to hydroxylation and oxidation on the CQD surface, resulting in the formation of trap states and a subsequent decline in SC performance. To address these challenges, this study introduces a flashlight annealing (FLA) technique that significantly reduces the annealing time to the millisecond scale. Through the FLA approach, it successfully suppressed hydroxylation and oxidation, resulting in decreased trap states within the CQD solids while simultaneously preserving their charge transport properties. As a result, CQD SCs treated with FLA exhibited a notable improvement, achieving an open-circuit voltage of 0.66 V compared to 0.63 V in TA-treated devices, leading to an increase in power conversion efficiency from 12.71% to 13.50%.

Unusual Raman Enhancement Effect of Ultrathin Copper Sulfide.

In surface-enhanced Raman spectroscopy (SERS), 2D materials are explored as substrates owing to their chemical stability and reproducibility. However, they exhibit lower enhancement factors (EFs) compared to noble metal-based SERS substrates. This study demonstrates the application of ultrathin covellite copper sulfide (CuS) as a cost-effective SERS substrate with a high EF value of 7.2 × 104 . The CuS substrate is readily synthesized by sulfurizing a Cu thin film at room temperature, exhibiting a Raman signal enhancement comparable to that of an Au noble metal substrate of similar thickness. Furthermore, computational simulations using the density functional theory are employed and time-resolved photoluminescence measurements are performed to investigate the enhancement mechanisms. The results indicate that polar covalent bonds (Cu─S) and strong interlayer interactions in the ultrathin CuS substrate increase the probability of charge transfer between the analyte molecules and the CuS surface, thereby producing enhanced SERS signals. The CuS SERS substrate demonstrates the selective detection of various dye molecules, including rhodamine 6G, methylene blue, and safranine O. Furthermore, the simplicity of CuS synthesis facilitates large-scale production of SERS substrates with high spatial uniformity, exhibiting a signal variation of less than 5% on a 4-inch wafer.

Evolution of Local Structural Motifs in Colloidal Quantum Dot Semiconductor Nanocrystals Leading to Nanofaceting.

Colloidal nanocrystals (NCs) have shown remarkable promise for optoelectronics, energy harvesting, photonics, and biomedical imaging. In addition to optimizing quantum confinement, the current challenge is to obtain a better understanding of the critical processing steps and their influence on the evolution of structural motifs. Computational simulations and electron microscopy presented in this work show that nanofaceting can occur during nanocrystal synthesis from a Pb-poor environment in a polar solvent. This could explain the curved interfaces and the olivelike-shaped NCs observed experimentally when these conditions are employed. Furthermore, the wettability of the PbS NCs solid film can be further modified via stoichiometry control, which impacts the interface band bending and, therefore, processes such as multiple junction deposition and interparticle epitaxial growth. Our results suggest that nanofaceting in NCs can become an inherent advantage when used to modulate band structures beyond what is traditionally possible in bulk crystals.

Understanding the Degradation of Methylenediammonium and Its Role in Phase-Stabilizing Formamidinium Lead Triiodide.

Formamidinium lead triiodide (FAPbI3) is the leading candidate for single-junction metal-halide perovskite photovoltaics, despite the metastability of this phase. To enhance its ambient-phase stability and produce world-record photovoltaic efficiencies, methylenediammonium dichloride (MDACl2) has been used as an additive in FAPbI3. MDA2+ has been reported as incorporated into the perovskite lattice alongside Cl-. However, the precise function and role of MDA2+ remain uncertain. Here, we grow FAPbI3 single crystals from a solution containing MDACl2 (FAPbI3-M). We demonstrate that FAPbI3-M crystals are stable against transformation to the photoinactive δ-phase for more than one year under ambient conditions. Critically, we reveal that MDA2+ is not the direct cause of the enhanced material stability. Instead, MDA2+ degrades rapidly to produce ammonium and methaniminium, which subsequently oligomerizes to yield hexamethylenetetramine (HMTA). FAPbI3 crystals grown from a solution containing HMTA (FAPbI3-H) replicate the enhanced α-phase stability of FAPbI3-M. However, we further determine that HMTA is unstable in the perovskite precursor solution, where reaction with FA+ is possible, leading instead to the formation of tetrahydrotriazinium (THTZ-H+). By a combination of liquid- and solid-state NMR techniques, we show that THTZ-H+ is selectively incorporated into the bulk of both FAPbI3-M and FAPbI3-H at ∼0.5 mol % and infer that this addition is responsible for the improved α-phase stability.

Synergistic Contribution of Oligo(ethylene glycol) and Fluorine Substitution of Conjugated Polymer Photocatalysts toward Solar Driven Sacrificial Hydrogen Evolution.

To separately explore the importance of hydrophilicity and backbone planarity of polymer photocatalyst, a series of benzothiadiazole-based donor-acceptor alternating copolymers incorporating alkoxy, linear oligo(ethylene glycol) (OEG) side chain, and backbone fluorine substituents is presented. The OEG side chains in the polymer backbone increase the surface energy of the polymer nanoparticles, thereby improving the interaction with water and facilitating electron transfer to water. Moreover, the OEG-attached copolymers exhibit enhanced intermolecular packing compared to polymers with alkoxy side chains, which is possibly attributed to the self-assembly properties of the side chains. Fluorine substituents on the polymer backbone produce highly ordered lamellar stacks with distinct π-π stacking features; subsequently, the long-lived polarons toward hydrogen evolution are observed by transient absorption spectroscopy. In addition, a new nanoparticle synthesis strategy using a methanol/water mixed solvent is first adopted, thereby avoiding the screening effect of surfactants between the nanoparticles and water. Finally, hydrogen evolution rate of 26 000 µmol g-1  h-1 is obtained for the copolymer incorporated with both OEG side chains and fluorine substituents under visible-light irradiation (λ > 420 nm). This study demonstrates how the glycol side chain strategy can be further optimized for polymer photocatalysts by controlling the backbone planarity.

Controlling Nucleation and Growth of Metal Halide Perovskite Thin Films for High-Efficiency Perovskite Solar Cells.

Metal halide perovskite thin films can be crystallized via a broad range of solution-based routes. However, the quality of the final films is strongly dependent upon small changes in solution composition and processing parameters. Here, this study demonstrates that a fractional substitution of PbCl2 with PbI2 in the 3CH3 NH3 I:PbCl2 mixed-halide starting solution has a profound influence upon the ensuing thin-film crystallization. The presence of PbI2 in the precursor induces a uniform distribution of regular quadrilateral-shaped CH3 NH3 PbI3 perovskite crystals in as-cast films, which subsequently grow to form pinhole-free perovskite films with highly crystalline domains. With this new formulation of 3CH3 NH3 I:0.98PbCl2 :0.02PbI2 , this study achieves a 19.1% current-voltage measured power conversion efficiency and a 17.2% stabilized power output in regular planar heterojunction solar cells.

Optically pumped distributed feedback dye lasing with slide-coated TiO2 inverse-opal slab as Bragg reflector.

We demonstrate an optical amplification of organic dye within a TiO2 inverse-opal (IO) distributed feedback (DFB) reflector prepared by a slide-coating method. Highly reflective TiO2 IO film was fabricated by slide coating the binary aqueous dispersions of polystyrene microspheres and charge-stabilized TiO2 nanoparticles on a glass slide and subsequently removing the polymer-opal template. TiO2 IO film was infiltrated, in turn, with the solutions of DCM, a fluorescent dye in various solvents with different indices of refraction. Optical pumping by frequency-doubled Nd:YAG laser resulted in amplified spontaneous emission in each dye solution. In accordance with the semi-empirical simulation by the FDTD method, DCM in ethanol showed the best emission/stopband matching for the TiO2 IO film used in this study. Therefore, photo excitation of a DCM/ethanol cavity showed a single-mode DFB lasing at 640 nm wavelength at moderate pump energy.

Elucidating Charge Carrier Dynamics in Perovskite-Based Tandem Solar Cells.

Recently, multijunction tandem solar cells (TSCs) have presented high power conversion efficiency and revealed their immense potential in photovoltaic evolution. It is demonstrated that multiple light absorbers with various bandgap energies overcome the Shockley-Queisser limit of single-junction solar cells by absorbing the wide-range wavelength photons. Here, the main key challenges are reviewed, especially the charge carrier dynamics in perovskite-based 2-terminal (2-T) TSCs in terms of current matching, and how to manage these issues from a vantage point of characterization. To do this, the effect of recombination layers, optical and fabrication hurdles, and the impact of wide bandgap perovskite solar cells are discussed extensively. Afterward, this review focuses on various optoelectronics, spectroscopic, and theoretical (optical simulation) characterizations to figure out those issues, especially current-matching issues faced by the photovoltaic society. This review comprehensively provides deep insights into the relationship between the current-matching problems and the photovoltaic performance of TSCs through a variety of perspectives. Consequently, it is believed that this review is essential to address the main problems of 2-T TSCs, and the suggestions to elucidate the charge carrier dynamics and its characterization may pave the way to overcome such obstacles to further improve the development of 2-T TSCs in relation to the current-matching problems.

Advancing optoelectronic characteristics of Diketopyrrolopyrrole-Based molecules as donors for organic and as hole transporting materials for perovskite solar cells.

A stable and efficient hole-transport material (HTM) is crucial for high-performance perovskite solar cells (PSCs). A 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-MeOTAD) being used widely to prepare highly efficient PSCs. However, Spiro-MeOTAD has some limitations due to its complex synthesis, which increases its cost, and it also requires dopants to improve its performance. Therefore, we designed thirteen unique small-molecule-based HTMs (MK1-MK13), which are easy to synthesize, highly cost-effective, and don't require dopants to prepare efficient PSCs. Their electrical and optical properties are then investigated theoretically using advanced quantum chemical approaches. The designed molecules showed lower energy gaps and improved optical and optoelectronic characteristics because of the improved phase inversion geometry. The detailed photo-physical and optoelectronic characteristics have been studied using density functional theory (DFT) and time-dependent (TD-DFT) calculations. Moreover, we investigated the impact of holes and electrons and the density of states, open-circuit voltage, frontier molecular orbital, transition density matrix, and other structural and photovoltaic characteristics of these materials. Among these, the MK3 molecule possesses the much narrower optical band gap of 1.04 eV and absorbance (λ max) of 684 nm, respectively. In addition, a profound investigation of the MK3/PC61BM blend shows excellent charge transfer at the acceptor-donor interface. Therefore, our proposed technique is necessary for generating appropriate photovoltaic materials for efficient optoelectronic devices and is helpful in further advancing the field.

Silica-Based Platform Decorated with Conjugated Polymer Dots and Prussian Blue for Improved Photodynamic Cancer Therapy.

To advance cancer treatment, we have developed a novel composite material consisting of conjugated polymer dots (CPDs) and Prussian blue (PB) particles, which were immobilized on, and encapsulated within, silica particles, respectively. The CPDs functioned as both a photosensitizer and a photodynamic agent, and the PB acted as a photothermal agent. The silica platform provided a biocompatible matrix that brought the two components into close proximity. Under laser irradiation, the fluorescence from the CPDs in the composite material enabled cell imaging and was subsequently converted to thermal energy by PB. This efficient energy transfer was accomplished because of the spectral overlap between the emission of donor CPDs and the absorbance of acceptor PB. The increase in local temperature in the cells resulted in a significant increase in the amount of reactive oxygen species (ROS) generated by CPDs, in which their independent use did not produce sufficient ROS for cancer cell treatment. To assess the impact of the enhanced ROS generation by the composite material, we conducted experiments using cancer cells under 532 nm laser irradiation. The results showed that with the increase in local temperature, the generated ROS increased by 30% compared with the control, which did not contain PB. When the silica-based composite material was positioned at the periphery of the tumor for 120 h, it led to a much slower tumor growth than other materials tested. By using a CPD-based photodynamic therapy platform, a new simplified approach to designing and preparing cancer treatments could be achieved, which included photothermal PB-assisted enhanced ROS generation using a single laser. This advancement opens up an exciting new opportunity for effective cancer treatment.

Manipulation and Direct Characterization of Polymer/Small-Molecule Interface Morphology in Bulk-Heterojunction Solar Cell.

To investigate the effect of miscibility between conjugated polymers (CPs) and Y6 on bulk-heterojunction (BHJ) type morphology, we propose three different CPs with similar chemical structures but different miscibility with Y6. After selectively removing Y6 from the CP/Y6 blend films, their interface morphology and interlocked dimensions are quantitatively compared using a square-wave model. As CP-Y6 miscibility increases, a higher intermixed interface is formed, providing an enlarged CP-Y6 interface area. Conversely, as the miscibility between CP and Y6 decreases, the height and width of the interlocked dimensions formed by phase separation gradually decrease and increase, respectively. Additionally, when the CP-Y6 interface morphology and electrical properties of the corresponding organic photovoltaic (OPV) device are correlated, as the highly intermixed CP-Y6 interface develops, the exciton dissociation efficiency increases owing to the reduced exciton diffusion length to be dissociated, but the bimolecular recombination tends to deteriorate simultaneously. Furthermore, if the miscibility between CP and Y6 is excessive, the formation of a charge transport pathway through phase separation is interrupted, deteriorating the charge transport capability in BHJ-type OPVs. However, it was confirmed that introducing F atoms into the conjugated backbone of CP can reduce the bimolecular recombination, providing ameliorated light-harvesting efficiency.

Exciton-Scissoring Perfluoroarenes Trigger Photomultiplication in Full Color Organic Image Sensors.

An unprecedented but useful functionality of perfluoroarenes to enable exciton scissoring in photomultiplication-type organic photodiodes (PM-OPDs) is reported. Perfluoroarenes that are covalently connected to polymer donors via a photochemical reaction enable the demonstration of high external quantum efficiency and B-/G-/R-selective PM-OPDs without the use of conventional acceptor molecules. The operation mechanism of the suggested perfluoroarene-driven PM-OPDs, how covalently bonded polymer donor:perfluoroarene PM-OPDs can perform as effectively as polymer donor:fullerene blend-based PM-OPDs, is investigated. By employing a series of arenes and conducting steady-state/time-resolved photoluminescence and transient absorption spectroscopy analyses, it is found that interfacial band bending between the perfluoroaryl group and polymer donor is responsible for exciton scissoring and subsequent electron trapping, which induces photomultiplication. Owing to the acceptor-free and covalently interconnected photoactive layer in the suggested PM-OPDs, superior operational and thermal stabilities are observed. Finally, finely patterned B-/G-/R-selective PM-OPD arrays that enable the construction of highly sensitive passive matrix-type organic image sensors are demonstrated.

Adjusted Bulk and Interfacial Properties in Highly Stable Semitransparent Perovskite Solar Cells Fabricated by Thermocompression Bonding between Perovskite Layers.

In order to shield perovskite solar cells (PSCs) from extrinsic degradation factors and ensure long-term stability, effective encapsulation technology is indispensable. Here, a facile process is developed to create a glass-glass encapsulated semitransparent PSC using thermocompression bonding. From quantifying the interfacial adhesion energy and considering the power conversion efficiency of devices, it is confirmed that bonding between perovskite layers formed on a hole transport layer (HTL)/indium-doped tin oxide (ITO) glass and an electron transport layer (ETL)/ITO glass can offer an excellent lamination method. The PSCs fabricated through this process have only buried interfaces between the perovskite layer and both charge transport layers as the perovskite surface is transformed into bulk. The thermocompression process leads the perovskite to have larger grains and smoother, denser interfaces, thereby not only reducing defect and trap density but also suppressing ion migration and phase segregation under illumination. In addition, the laminated perovskite demonstrates enhanced stability against water. The self-encapsulated semitransparent PSCs with a wide-band-gap perovskite (Eg ∼ 1.67 eV) demonstrate a power conversion efficiency of 17.24% and maintain long-term stability with PCE > ∼90% in the 85 °C shelf test for over 3000 h and with PCE > ∼95% under AM 1.5 G, 1-sun illumination in an ambient atmosphere for over 600 h.

Long-range charge carrier mobility in metal halide perovskite thin-films and single crystals via transient photo-conductivity.

Charge carrier mobility is a fundamental property of semiconductor materials that governs many electronic device characteristics. For metal halide perovskites, a wide range of charge carrier mobilities have been reported using different techniques. Mobilities are often estimated via transient methods assuming an initial charge carrier population after pulsed photoexcitation and measurement of photoconductivity via non-contact or contact techniques. For nanosecond to millisecond transient methods, early-time recombination and exciton-to-free-carrier ratio hinder accurate determination of free-carrier population after photoexcitation. By considering both effects, we estimate long-range charge carrier mobilities over a wide range of photoexcitation densities via transient photoconductivity measurements. We determine long-range mobilities for FA0.83Cs0.17Pb(I0.9Br0.1)3, (FA0.83MA0.17)0.95Cs0.05Pb(I0.9Br0.1)3 and CH3NH3PbI3-xClx polycrystalline films in the range of 0.3 to 6.7 cm2 V-1 s-1. We demonstrate how our data-processing technique can also reveal more precise mobility estimates from non-contact time-resolved microwave conductivity measurements. Importantly, our results indicate that the processing of polycrystalline films significantly affects their long-range mobility.

Thermodynamic control over the competitive anchoring of N719 dye on nanocrystalline TiO2 for improving photoinduced electron generation.

TiO(2) electrodes, sensitized with the N719 dye at high immersion temperatures during the sensitization process, were found to have large fractions of weakly bound N719 on the electrode surface, which resulted in dye aggregation and decreased device longevity. These disadvantages were ameliorated using a low-temperature stearic acid (SA)-assisted anchoring method described here. The activation energy (ΔE(NS)(++)) and relative fraction of strongly bound N719 were twice as large as the respective values obtained without the use of SA. Slowing of adsorption, both by thermal means and through SA-mediated processes, effectively controlled the binding mode of N719 on the surface of TiO(2). The resulting sensitized electrodes displayed enhanced device longevity and improved generation of photoinduced electrons.

Revealing Charge Carrier Mobility and Defect Densities in Metal Halide Perovskites via Space-Charge-Limited Current Measurements.

Space-charge-limited current (SCLC) measurements have been widely used to study the charge carrier mobility and trap density in semiconductors. However, their applicability to metal halide perovskites is not straightforward, due to the mixed ionic and electronic nature of these materials. Here, we discuss the pitfalls of SCLC for perovskite semiconductors, and especially the effect of mobile ions. We show, using drift-diffusion (DD) simulations, that the ions strongly affect the measurement and that the usual analysis and interpretation of SCLC need to be refined. We highlight that the trap density and mobility cannot be directly quantified using classical methods. We discuss the advantages of pulsed SCLC for obtaining reliable data with minimal influence of the ionic motion. We then show that fitting the pulsed SCLC with DD modeling is a reliable method for extracting mobility, trap, and ion densities simultaneously. As a proof of concept, we obtain a trap density of 1.3 × 1013 cm-3, an ion density of 1.1 × 1013 cm-3, and a mobility of 13 cm2 V-1 s-1 for a MAPbBr3 single crystal.

Balanced Charge Carrier Transport Mediated by Quantum Dot Film Post-organization for Light-Emitting Diode Applications.

In light-emitting diodes (LEDs), balanced electron and hole transport is of particular importance to achieve high rates of radiative recombination. Most quantum dot (QD)-based LEDs, however, employ infinitesimal core-shell QDs which inherently have different electron and hole mobilities. As QDs are the core building blocks of QD-LEDs, the inherent mobility difference in the core-shell QDs causes significantly unbalanced charge carrier transport, resulting in detrimental effects on performances of QD-LEDs. Herein, we introduce a post-chemical treatment to reconstruct the QD films through the solvent-mediated self-organization process. The treatment using various poly-alkyl alcohol groups enables QD ensembles to transform from disordered solid dispersion into an ordered superlattice and effectively modulate electron and hole mobilities, which leads to the balanced charge carrier transport. In particular, ethanol-treated QD films exhibit enhanced charge carrier lifetime and reduced hysteresis due to the balanced charge carrier transport, which is attributed to the preferential-facet-oriented QD post-organization. As a result, 63, 78, and 54% enhancements in the external quantum efficiency were observed in red, green, and blue QD-LEDs, respectively. These results are of fundamental importance to understand both solvent-mediated QD film reconstruction and the effect of balanced electron and hole transport in QD-LEDs.

Publisher Correction: Deciphering photocarrier dynamics for tuneable high-performance perovskite-organic semiconductor heterojunction phototransistors.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells.

Longevity has been a long-standing concern for hybrid perovskite photovoltaics. We demonstrate high-resilience positive-intrinsic-negative perovskite solar cells by incorporating a piperidinium-based ionic compound into the formamidinium-cesium lead-trihalide perovskite absorber. With the bandgap tuned to be well suited for perovskite-on-silicon tandem cells, this piperidinium additive enhances the open-circuit voltage and cell efficiency. This additive also retards compositional segregation into impurity phases and pinhole formation in the perovskite absorber layer during aggressive aging. Under full-spectrum simulated sunlight in ambient atmosphere, our unencapsulated and encapsulated cells retain 80 and 95% of their peak and post-burn-in efficiencies for 1010 and 1200 hours at 60° and 85°C, respectively. Our analysis reveals detailed degradation routes that contribute to the failure of aged cells.