ABSTRACT
Solid-state Li-S batteries (SSLSBs) are made of low-cost and abundant materials free of supply chain concerns. Owing to their high theoretical energy densities, they are highly desirable for electric vehicles1-3. However, the development of SSLSBs has been historically plagued by the insulating nature of sulfur4,5 and the poor interfacial contacts induced by its large volume change during cycling6,7, impeding charge transfer among different solid components. Here we report an S9.3I molecular crystal with I2 inserted in the crystalline sulfur structure, which shows a semiconductor-level electrical conductivity (approximately 5.9 × 10-7 S cm-1) at 25 °C; an 11-order-of-magnitude increase over sulfur itself. Iodine introduces new states into the band gap of sulfur and promotes the formation of reactive polysulfides during electrochemical cycling. Further, the material features a low melting point of around 65 °C, which enables repairing of damaged interfaces due to cycling by periodical remelting of the cathode material. As a result, an Li-S9.3I battery demonstrates 400 stable cycles with a specific capacity retention of 87%. The design of this conductive, low-melting-point sulfur iodide material represents a substantial advancement in the chemistry of sulfur materials, and opens the door to the practical realization of SSLSBs.
ABSTRACT
Silicone-based elastomers (SEs) have been extensively applied in numerous cutting-edge areas, including flexible electronics, biomedicine, 5G smart devices, mechanics, optics, soft robotics, etc. However, traditional strategies for the synthesis of polymer elastomers, such as bulk polymerization, suspension polymerization, solution polymerization, and emulsion polymerization, are inevitably restricted by long-time usage, organic solvent additives, high energy consumption, and environmental pollution. Here, we propose a Joule heating chemistry method for ultrafast universal fabrication of SEs with configurable porous structures and tunable components (e.g., graphene, Ag, graphene oxide, TiO2, ZnO, Fe3O4, V2O5, MoS2, BN, g-C3N4, BaCO3, CuI, BaTiO3, polyvinylidene fluoride, cellulose, styrene-butadiene rubber, montmorillonite, and EuDySrAlSiOx) within seconds by only employing H2O as the solvent. The intrinsic dynamics of the in situ polymerization and porosity creation of these SEs have been widely investigated. Notably, a flexible capacitive sensor made from as-fabricated silicone-based elastomers exhibits a wide pressure range, fast responses, long-term durability, extreme operating temperatures, and outstanding applicability in various media, and a wireless human-machine interaction system used for rescue activities in extreme conditions is established, which paves the way for more polymer-based material synthesis and wider applications.
ABSTRACT
Rechargeable lithium-ion batteries with high energy density that can be safely charged and discharged at high rates are desirable for electrified transportation and other applications1-3. However, the sub-optimal intercalation potentials of current anodes result in a trade-off between energy density, power and safety. Here we report that disordered rock salt4,5 Li3+xV2O5 can be used as a fast-charging anode that can reversibly cycle two lithium ions at an average voltage of about 0.6 volts versus a Li/Li+ reference electrode. The increased potential compared to graphite6,7 reduces the likelihood of lithium metal plating if proper charging controls are used, alleviating a major safety concern (short-circuiting related to Li dendrite growth). In addition, a lithium-ion battery with a disordered rock salt Li3V2O5 anode yields a cell voltage much higher than does a battery using a commercial fast-charging lithium titanate anode or other intercalation anode candidates (Li3VO4 and LiV0.5Ti0.5S2)8,9. Further, disordered rock salt Li3V2O5 can perform over 1,000 charge-discharge cycles with negligible capacity decay and exhibits exceptional rate capability, delivering over 40 per cent of its capacity in 20 seconds. We attribute the low voltage and high rate capability of disordered rock salt Li3V2O5 to a redistributive lithium intercalation mechanism with low energy barriers revealed via ab initio calculations. This low-potential, high-rate intercalation reaction can be used to identify other metal oxide anodes for fast-charging, long-life lithium-ion batteries.
ABSTRACT
All-climate temperature operation capability and increased energy density have been recognized as two crucial targets, but they are rarely achieved together in rechargeable lithium (Li) batteries. Herein, we demonstrate an electrolyte system by using monodentate dibutyl ether with both low melting and high boiling points as the sole solvent. Its weak solvation endows an aggregate solvation structure and low solubility toward polysulfide species in a relatively low electrolyte concentration (2 mol L-1). These features were found to be vital in avoiding dendrite growth and enabling Li metal Coulombic efficiencies of 99.0%, 98.2%, and 98.7% at 23 °C, -40 °C, and 50 °C, respectively. Pouch cells employing thin Li metal (50 µm) and high-loading sulfurized polyacrylonitrile (3.3 mAh cm-2) cathodes (negative-to-positive capacity ratio = 2) output 87.5% and 115.9% of their room temperature capacity at -40 °C and 50 °C, respectively. This work provides solvent-based design criteria for a wide temperature range Li-sulfur pouch cells.
ABSTRACT
Commercial batteries have been largely applied in mobile electronics, electric vehicles, and scalable energy storage systems. However, thermal runaway of batteries still obstructs the reliability of electric equipment. Considering this, building upon recent investigations of energy thermal safety, commercially available organogel fiber-based implantable sensors have been developed through 3D printing technology for first operando implantable monitoring of cell temperature. The printed fibers present excellent reliability and superelasticity because of internal supramolecular cross-linking. High temperature sensitivity (-39.84% °C-1/-1.557% °C-1) within a wide range (-15 to 80 °C) is achieved, and the corresponding mechanism is clarified based on in situ temperature-dependent Raman technology. Furthermore, taking the pouch cell as an example, combined with finite element analysis, the real-time observation system of cell temperature is successfully demonstrated through an implanted sensor with wireless Bluetooth transmission. This enlightening approach paves the way for achieving safety monitoring and smart warnings for various electric equipment.
ABSTRACT
In recent years, redox reactions have harnessed light or mechanical energy to enable the formation of chemical bonds. We postulated a complementary approach that electromagnetic induction could promote the redox reaction of organic molecules using a rotating magnetic field and metal rods. Here, we report that electromotive force activates the redox-active trifluoromethylating reagents. This magnetoredox system can be applied to the trifluoromethylation of heteroarenes with high regioselectivity and hydrotrifluoromethylation of alkenes without the need for catalysts and organic additives.
ABSTRACT
The locus coeruleus (LC), enriched in vesicular glutamate transporter 2 (VGlut2) neurons, is a potential homeostasis-regulating hub. However, the identity of melanocortin-4 receptor (MC4R) neurons in the paraventricular nucleus (PVN) of the hypothalamus, PVNVGlut2::MC4R and LCVGlut2::MC4R regulation of body weight, and axonal projections of LCVGlut2 neurons remain unclear. Conditional knockout of MC4R in chimeric mice was used to confirm the effects of VGlut2. Interscapular brown adipose tissue was injected with pseudorabies virus to study the central nervous system projections. We mapped the LCVGlut2 circuitry. Based on the Cre-LoxP recombination system, specific knockdown of MC4R in VGlut2 neurons resulted in weight gain in chimeric mice. Adeno-associated virus-mediated knockdown of MC4R expression in the PVN and LC had potential superimposed effects on weight gain, demonstrating the importance of VGlut2 neurons. Unlike these wide-ranging efferent projections, the PVN, hypothalamic arcuate nucleus, supraoptic nucleus of the lateral olfactory tegmental nuclei, and nucleus tractus solitarius send excitatory projections to LCVGlut2 neurons. The PVN â LC glutamatergic MC4R long-term neural circuit positively affected weight management and could help treat obesity.
Subject(s)
Paraventricular Hypothalamic Nucleus , Receptor, Melanocortin, Type 4 , Mice , Animals , Receptor, Melanocortin, Type 4/genetics , Receptor, Melanocortin, Type 4/metabolism , Body Weight , Paraventricular Hypothalamic Nucleus/metabolism , Neurons/metabolism , Weight GainABSTRACT
High-purity 1T'-WS2 film has been experimentally synthesized [Nature Materials, 20, 1113-1120 (2021)] and theoretically predicted to be a two-dimensional (2D) superconducting material with Dirac cones [arXiv:2301.11425]. In the present work, we further study the superconducting properties of monolayer 1T'-WS2 by applying biaxial tensile strain. It is shown that the superconducting critical temperature Tc firstly increases and then decreases with respect to tensile strains, with the highest superconducting critical temperature Tc of 7.25 K under the biaxial tensile strain of 3%. In particular, we find that Dirac cones also exist in several tensile strained cases. Our studies show that monolayer 1T'-WS2 may provide a good platform for understanding the superconductivity of 2D Dirac materials.
ABSTRACT
A novel fiber sensor for the refractive index sensing of seawater based on a Mach-Zehnder interferometer has been demonstrated. The sensor consisted of a single-mode fiber (SMF)-no-core fiber (NCF)-single-mode fiber structure (shortened to an SNS structure) with a large lateral offset spliced between the two sections of a multimode fiber (MMF). Optimization studies of the multimode fiber length, offset SNS length, and vertical axial offset distance were performed to improve the coupling efficiency of interference light and achieve the best extinction ratio. In the experiment, a large lateral offset sensor was prepared to detect the refractive index of various ratios of saltwater, which were used to simulate seawater environments. The sensor's sensitivity was up to -13,703.63 nm/RIU and -13,160 nm/RIU in the refractive index range of 1.3370 to 1.3410 based on the shift of the interference spectrum. Moreover, the sensor showed a good linear response and high stability, with an RSD of only 0.0089% for the trough of the interference in air over 1 h.
ABSTRACT
Flexible aqueous zinc batteries are promising candidates as safe power sources for fast-growing portable and wearable electronics. However, the low working voltage, poor rate capability, and cycling stability have greatly restricted their development and applications. Here, a new family of flexible bimetallic phosphide/carbon nanotube hybrid fiber electrodes with unique macroscopic microcrack structure and microscopic porous nanoflower structure is reported. The hierarchical microcrack structure not only facilitates the penetration of electrolyte for effective exposure of active sites, but also can serve as buffers to relieve the stress concentrations of the fiber electrode under deformations, enabling impressive electrochemical performance and mechanical flexibility. Particularly, the fabricated flexible aqueous zinc batteries demonstrate high working voltage plateau and specific capacity (≈1.7 V, 258.9 mAh g-1 at 2 A g-1 ), ultrahigh rate capability (135.8 mAh g-1 at 50 A g-1 , fully charged in only 9.8 s) and impressive power density of 79 000 W kg-1 . Moreover, the flexible batteries show ultralong cycling life with 74.6% capacity retention after 20 000 cycles. The fiber batteries are also highly flexible and can be easily knitted into soft electronic textiles to power a smartphone, which are particularly promising for the next-generation of flexible and wearable electronics.
ABSTRACT
Ventilator-associated pneumonia (VAP) and pyogenic liver abscess (PLA) due to Klebsiella pneumoniae infection can trigger life-threatening malignant consequences, however, there are few studies on the strain-associated clinical pathogenic mechanisms between VAP and PLA. A total of 266 patients consist of 129 VAP and 137 PLA were included for analysis in this study. We conducted a comprehensive survey for the two groups of K. pneumoniae isolates, including phenotypic experiments, clinical epidemiology, genomic analysis, and instrumental analysis, i.e., to obtain the genomic differential profile of K. pneumoniae strains responsible for two distinct infection outcomes. We found that PLA group had a propensity for specific underlying diseases, especially diabetes and cholelithiasis. The resistance level of VAP was significantly higher than that of PLA (78.57% vs. 36%, P < 0.001), while the virulence results were opposite. There were also some differences in key signaling pathways of biochemical processes between the two groups. The combination of iucA, rmpA, hypermucoviscous phenotype, and ST23 presented in K. pneumoniae infection is more important and highly prudent for timely treatment. The present study may contribute a benchmark for the K. pneumoniae clinical screening, epidemiological surveillance, and effective therapeutic strategies.
Subject(s)
Klebsiella Infections , Liver Abscess , Pneumonia, Ventilator-Associated , Humans , Klebsiella pneumoniae , Virulence Factors/genetics , Multilocus Sequence Typing , Phenotype , Klebsiella Infections/epidemiologyABSTRACT
Theoretically and experimentally, MXenes consisting of Mo and C have aroused much interest due to superconductivity in their films and even monolayer forms. Here, based on first-principles calculations, we systematically calculate the electronic structure, phonon dispersion, and electron-phonon coupling (EPC) of monolayer Mo2C (both T- and H-phases), Mo3C2, and Mo3C3. The results show that H-MoxCy (x = 2 or 3, y = 1-3) always have lower total energies than their corresponding T phase and other configurations. All these two-dimensional (2D) molybdenum carbides are metals and some of them display weak phonon-mediated superconductivity at different superconducting transition temperatures (Tc). The Mo 4d-orbitals play a critical role in their electronic properties and the Mo atomic vibrations play a dominant role in their low-frequency phonons, EPC, and superconductivity. By comparison, we find that increasing the Mo content can enhance the EPC and Tc. Besides, we further explore the impact of strain engineering on their superconducting related physical quantities. With increasing biaxial stretching, the phonon dispersions are gradually softened to form some soft modes, which can trigger some peaks of α2F(ω) in the low-frequency region and evidently increase the EPC λ. The Tc of H-Mo2C can be increased up to 11.79 K. Upon further biaxial stretching, charge density waves may appear in T-Mo2C, H-Mo3C2, and H-Mo3C3.
ABSTRACT
In recent years, three-dimensional (3D) high-temperature superconductors at ultrahigh pressure have been reported, typical examples are the polyhydrides H3S, LaH10, YH9, etc. To find high-temperature two-dimensional (2D) superconductors at atmospheric pressure is another research hotspot. Here, we investigated the possible superconductivity in a hydrogenated monolayer phosphorus carbide based on first-principles calculations. The results reveal that monolayer PC3 transforms from a semiconductor to a metal after hydrogenation. Interestingly, the C-π-bonding band contributes most to the states at the Fermi level. Based on the electron-phonon coupling mechanism, it is found that the electron-phonon coupling constant of HPC3 is 0.95, which mainly originates from the coupling of C-π electrons with the in-plane vibration modes of C and H. The calculated critical temperature Tc is 31.0 K, which is higher than those in most 2D superconductors. By further applying a biaxial tensile strain of 3%, the Tc can be boosted to 57.3 K, exceeding the McMillan limit. Thus, hydrogenation and strain are effective ways for increasing the superconducting Tc of 2D materials.
ABSTRACT
Objective: Amylin acts on the lateral dorsal tegmental nucleus (LDT), resulting in anorexic and weight-loss effects and activates thermogenesis in the interscapular brown adipose tissue (IBAT). In addition, it induces neuronal nitric oxide synthase (nNOS) and choline acetyltransferase (ChAT)-mediated feeding. However, the influence of the intact sympathetic nervous system (SNS) in mediating amylin's effects has not been fully characterised. We investigated whether extracellular signal-regulated kinase (ERK), nNOS, and ChAT activities in the LDT are responsible for amylin's anorexigenic effects and whether this requires an intact SNS.Methods: C57BL/6J mice [wild-type (WT), sham, and sympathetic denervation of IBAT] were used. Food consumption, body weight, and distribution of pERK, nNOS, and ChAT positive neurons in the brain were examined following acute and chronic amylin administration.Results: Food intake was significantly decreased in WT and sham animals following acute amylin injection, but not in the denervated mice. Chronic amylin reduced body weight and serum glucose levels after 6 weeks, but increased insulin levels; no changes were observed in the denervated mice. Acute amylin increased the expression of nNOS, ChAT, and uncoupling protein-1 in the IBAT of WT and sham mice, while no changes were observed in the denervated mice and pERK from the above effect.Conclusions: Intact SNS of IBAT influences amylin-induced suppression of food intake and body weight, thus affecting nNOS and ChAT signalling in the LDT and locus coeruleus.
Subject(s)
Adipose Tissue, Brown , Islet Amyloid Polypeptide , Adipose Tissue, Brown/metabolism , Animals , Body Weight , Eating , Islet Amyloid Polypeptide/metabolism , Islet Amyloid Polypeptide/pharmacology , Mice , Mice, Inbred C57BL , Sympathetic Nervous SystemABSTRACT
Flexible aqueous zinc-ion batteries (ZIBs) are considered as promising energy storage devices for wearable electronics due to their cost-effectiveness, environmental friendliness, and high theoretical energy density. Herein, a flexible fiber-shaped aqueous ZIB is demonstrated by using a self-assembled Co3O4 nanosheet array on a carbon nanotube fiber as the cathode and Zn nanosheets deposited on a carbon nanotube fiber as the anode. The cycle life span of the fiber-shaped battery is largely enhanced by a simple electrolyte dynamics engineering strategy of preadding a trace amount of Co2+ cations in the mild aqueous electrolyte. The assembled fiber-shaped ZIB shows a high specific capacity (158.70 mAh g-1 at 1 A g-1), superior rate capacity, and excellent cycling life span (97.27% capacity retention after 10,000 cycles). Additionally, the fiber-shaped ZIB also shows superior flexibility, which can charge a smart watch under deformed states. This work provides new opportunities for the development of flexible, safe, and high-performance energy storage devices for wearable electronics.
Subject(s)
Electric Power Supplies , Zinc , Cobalt , Electrolytes , OxidesABSTRACT
Ghrelin is an orexigenic agonist that acts directly on neurons in the hypothalamus, controlling appetite and energy balance. Although its role in appetite-associated neurons has been described, the relationship between peripheral ghrelin stimulation and oxytocin expression in the paraventricular nucleus is not fully understood. We evaluated the suppressive function of ghrelin in oxytocin-positive paraventricular nucleus neurons in ovariectomized C57BL/6 mice 2 h after ghrelin injection. The results showed that, in intact mice, peripheral ghrelin stimulation activated estrogen receptor alpha-expressing neurons during the estrous cycle and that agouti-related peptide mRNA expression was remarkably increased. Agouti-related peptide neuron axons co-localized with oxytocin neurons in the paraventricular nucleus. Moreover, the response of oxytocin-positive paraventricular nucleus neurons to ghrelin was suppressed in the proestrus period, while ghrelin decreased the serum concentration of estradiol in the proestrus phase. These data suggest that ghrelin may suppress oxytocin-positive neuron expression via the arcuate nucleus agouti-related peptide circuit, with the possible influence of estradiol in the murine estrous cycle. Unraveling the mechanism of ghrelin-induced oxytocin expression in the hypothalamus paraventricular nucleus broadens the horizon for ghrelin-related appetite research.
Subject(s)
Agouti-Related Protein/metabolism , Arcuate Nucleus of Hypothalamus/metabolism , Estradiol/blood , Estrogen Receptor alpha/metabolism , Estrous Cycle/metabolism , Ghrelin/metabolism , Neurons/metabolism , Oxytocin/metabolism , Paraventricular Hypothalamic Nucleus/metabolism , Animals , Female , Ghrelin/pharmacology , Mice , Mice, Inbred C57BL , OvariectomyABSTRACT
Methane, a major greenhouse gas, plays an important role in global carbon cycling and climate change. Methanogenesis is identified as an important process for methane formation in estuarine sediments. However, the metabolism of methane in the water columns of estuaries is not well understood. The goal of this research was to examine the dynamics in abundance and community composition of methanogens and methanotrophs, and to examine whether and how they take part in methane metabolism in the water columns from the lower Pearl River (freshwater) to the coastal South China Sea (seawater). Quantitative PCR (qPCR) and high-throughput sequencing results showed that the abundance of methanogens decreased with increasing salinity, suggesting that growth of these methanogens in the Pearl River Estuary may be influenced by high salinity. Also, the methane concentration in surface waters was lower than that in near-bottom waters at most sites, suggesting sediment methanogens are a likely source of methane. In the estuarine mixing zone, significantly high methane concentrations existed with the presence of salt-tolerant methanogens (e.g., Methanomicrobiaceae, Methanocella, Methanosaeta and Methanobacterium) and methanotrophs (e.g., Methylocystis and Methylococcaceae), which were found in brackish habitats. Furthermore, a number of methanotrophic OTUs (from pmoA gene sequence data) had specific positive correlations with methanogenic OTUs (from mcrA gene sequence data), and some of these methanogenic OTUs were correlated with concentrations of particulate organic carbon (POC). The results indicate that methanotrophs and methanogens may be intimately linked in methane metabolism attached with particles in estuarine waters.
Subject(s)
Methane/metabolism , Microbial Consortia , Rivers/microbiology , Salinity , Archaea/classification , Archaea/genetics , Bacteria/classification , Bacteria/genetics , China , Ecosystem , Estuaries , Euryarchaeota/genetics , Euryarchaeota/metabolism , Methylococcaceae/genetics , Methylococcaceae/metabolism , Phylogeny , RNA, Ribosomal, 16S/geneticsABSTRACT
Na3V(PO4)2 was reported recently as a novel cathode material with high theoretical energy density for Sodium-ion batteries (SIBs). However, whether V3+/V4+/V5+ multielectron reactions can be realized during the charging process is still an open question. In this work, Na3V(PO4)2 is synthesized by using a solid-state method. Its atomic composition and crystal structure are verified by X-ray diffraction (XRD) and neutron diffraction (ND) joint refinement. The electrochemical performance of Na3V(PO4)2 is evaluated in two different voltage windows, namely 2.5-3.8 and 2.5-4.3 V. 51V solid-state NMR (ssNMR) results disclose the presence of V5+ in Na2-xV(PO4)2 when charging Na3V(PO4)2 to 4.3 V, confirming Na3V(PO4)2 is a potential high energy density cathode through realization of V3+/V4+/V5+ multielectron reactions.
Subject(s)
Electric Power Supplies , Electrons , Sodium/chemistry , Vanadium Compounds/chemistry , Cations, Monovalent , Electricity , Electrochemical Techniques , Electrodes , Humans , Solar Energy , Vanadium Compounds/chemical synthesisABSTRACT
This paper addresses the automatic berthing of a maritime autonomous surface ship operating in a confined water environment subject to static obstacles, dynamic obstacles, thruster constraints, and space constraints due to shorelines. A safety-certified active disturbance rejection control (ADRC) method is proposed for achieving the automatic berthing task of an MASS in the presence of model uncertainties and ocean disturbances. An extended state observer (ESO) based on a second-order robust exact differentiator (RED) is employed to estimate an extended state vector consisting of internal model uncertainties and external ocean disturbances. With the aid of the RED-based ESO, a nominal ADRC law is designed to achieve the position and heading stabilization. To avoid collisions with static obstacles, dynamic obstacles, and shorelines, input-to-state safe high-order control barrier functions are used to guarantee safety. Optimized control signals are obtained based on a constrained quadratic programming (QP) problem within safety constraints. In order to translate the control signals into the individual thruster command, a constrained QP problem is further used to search for optimized commands in real time. It is proven that the closed-loop automatic berthing system is input-to-state stable. By using the proposed method, the MASS is able to reach the desired position and heading with collision avoidance. Simulation results verify the effectiveness of the proposed safety-certified ADRC method for automatic berthing.
ABSTRACT
The development of advanced layered Ni-rich cathodes is essential for high-energy lithium-ion batteries (LIBs). However, the prevalent Ni-rich cathodes are still plagued by inherent issues of chemomechanical and thermal instabilities and limited cycle life. For this, here, we introduce an efficient approach combining single-crystalline (SC) design with in situ high-entropy (HE) doping to engineer an ultrahigh-Ni cobalt-free layered cathode of LiNi0.88Mn0.03Mg0.02Fe0.02Ti0.02Mo0.02Nb0.01O2 (denoted as HE-SC-N88). Thanks to the SC- and HE-doping merits, HE-SC-N88 is featured with a grain-boundary-free and stabilized structure with minimal lattice strain, preventing mechanical degradation, reducing surface parasitic reactions, and mitigating oxygen loss. Accordingly, our HE-SC-N88 cathode demonstrates exceptional electrochemical properties particularly with prolonged cycling stability under strenuous conditions in both half and full cells, and the delayed O loss-induced phase transitions upon heating. More meaningfully, our design of HE doping in redefining the ultrahigh-Ni Co-free SC cathodes will make a tremendous progress toward industrial application of next-generation LIBs.