Intrinsic toughening and stable crack propagation in hexagonal boron nitride.

If a bulk material can withstand a high load without any irreversible damage (such as plastic deformation), it is usually brittle and can fail catastrophically1,2. This trade-off between strength and fracture toughness also extends into two-dimensional materials space3-5. For example, graphene has ultrahigh intrinsic strength (about 130 gigapascals) and elastic modulus (approximately 1.0 terapascal) but is brittle, with low fracture toughness (about 4 megapascals per square-root metre)3,6. Hexagonal boron nitride (h-BN) is a dielectric two-dimensional material7 with high strength (about 100 gigapascals) and elastic modulus (approximately 0.8 terapascals), which are similar to those of graphene8. Its fracture behaviour has long been assumed to be similarly brittle, subject to Griffith's law9-14. Contrary to expectation, here we report high fracture toughness of single-crystal monolayer h-BN, with an effective energy release rate up to one order of magnitude higher than both its Griffith energy release rate and that reported for graphene. We observe stable crack propagation in monolayer h-BN, and obtain the corresponding crack resistance curve. Crack deflection and branching occur repeatedly owing to asymmetric edge elastic properties at the crack tip and edge swapping during crack propagation, which intrinsically toughens the material and enables stable crack propagation. Our in situ experimental observations, supported by theoretical analysis, suggest added practical benefits and potential new technological opportunities for monolayer h-BN, such as adding mechanical protection to two-dimensional devices.

Conversion of non-van der Waals solids to 2D transition-metal chalcogenides.

Although two-dimensional (2D) atomic layers, such as transition-metal chalcogenides, have been widely synthesized using techniques such as exfoliation1-3 and vapour-phase growth4,5, it is still challenging to obtain phase-controlled 2D structures6-8. Here we demonstrate an effective synthesis strategy via the progressive transformation of non-van der Waals (non-vdW) solids to 2D vdW transition-metal chalcogenide layers with identified 2H (trigonal prismatic)/1T (octahedral) phases. The transformation, achieved by exposing non-vdW solids to chalcogen vapours, can be controlled using the enthalpies and vapour pressures of the reaction products. Heteroatom-substituted (such as yttrium and phosphorus) transition-metal chalcogenides can also be synthesized in this way, thus enabling a generic synthesis approach to engineering phase-selected 2D transition-metal chalcogenide structures with good stability at high temperatures (up to 1,373 kelvin) and achieving high-throughput production of monolayers. We anticipate that these 2D transition-metal chalcogenides will have broad applications for electronics, catalysis and energy storage.

Superior mechanical properties of multilayer covalent-organic frameworks enabled by rationally tuning molecular interlayer interactions.

Two-dimensional (2D) covalent-organic frameworks (COFs) with a well-defined and tunable periodic porous skeleton are emerging candidates for lightweight and strong 2D polymeric materials. It remains challenging, however, to retain the superior mechanical properties of monolayer COFs in a multilayer stack. Here, we successfully demonstrated a precise layer control in synthesizing atomically thin COFs, enabling a systematic study of layer-dependent mechanical properties of 2D COFs with two different interlayer interactions. It was shown that the methoxy groups in COFTAPB-DMTP provided enhanced interlayer interactions, leading to layer-independent mechanical properties. In sharp contrast, mechanical properties of COFTAPB-PDA decreased significantly as the layer number increased. We attributed these results to higher energy barriers against interlayer sliding due to the presence of interlayer hydrogen bonds and possible mechanical interlocking in COFTAPB-DMTP, as revealed by density functional theory calculations.

Toward Controlled Synthesis of 2D Crystals by CVD: Learning from the Real-Time Crystal Morphology Evolutions.

The rich morphology of 2D materials grown through chemical vapor deposition (CVD), is a distinctive feature. However, understanding the complex growth of 2D crystals under practical CVD conditions remains a challenge due to various intertwined factors. Real-time monitoring is crucial to providing essential data and enabling the use of advanced tools like machine learning for unraveling these complexities. In this study, we present a custom-built miniaturized CVD system capable of observing and recording 2D MoS2 crystal growth in real time. Image processing converts the real-time footage into digital data, and machine learning algorithms (ML) unveil the significant factors influencing growth. The machine learning model successfully predicts CVD growth parameters for synthesizing ultralarge monolayer MoS2 crystals. It also demonstrates the potential to reverse engineer CVD growth parameters by analyzing the as-grown 2D crystal morphology. This interdisciplinary approach can be integrated to enhance our understanding of controlled 2D crystal synthesis through CVD.

Spatially Resolved Anion Diffusion and Tunable Waveguides in Bismuth Halide Perovskites.

Bismuth halide perovskites are widely regarded as nontoxic alternatives to lead halide perovskites for optoelectronics and solar energy harvesting applications. With a tailorable composition and intriguing optical properties, bismuth halide perovskites are also promising candidates for tunable photonic devices. However, robust control of the anion composition in bismuth halide perovskites remains elusive. Here, we established chemical vapor deposition and anion exchange protocols to synthesize bismuth halide perovskite nanoflakes with controlled dimensions and variable compositions. In particular, we demonstrated the gradient bromide distribution by controlling the anion exchange and diffusion processes, which is spatially resolved by time-of-flight secondary ion mass spectrometry. Moreover, the optical waveguiding properties of bismuth halide perovskites can be modulated by flake thicknesses and anion compositions. With a unique gradient anion distribution and controllable optical properties, bismuth halide perovskites provide new possibilities for applications in optoelectronic devices and integrated photonics.

UBC9-mediated SUMOylation of Lamin B1 enhances DNA-damage-induced nuclear DNA leakage and autophagy after spinal cord injury.

Recent studies have shown that nucleophagy can mitigate DNA damage by selectively degrading nuclear components protruding from the nucleus. However, little is known about the role of nucleophagy in neurons after spinal cord injury (SCI). Western blot analysis and immunofluorescence were performed to evaluate the nucleophagy after nuclear DNA damage and leakage in SCI neurons in vivo and NSC34 expression in primary neurons cultured with oxygen-glucose deprivation (OGD) in vitro, as well as the interaction and colocalization of autophagy protein LC3 with nuclear lamina protein Lamin B1. The effect of UBC9, a Small ubiquitin-related modifier (SUMO) E2 ligase, on Lamin B1 SUMOylation and nucleophagy was examined by siRNA transfection or 2-D08 (a small-molecule inhibitor of UBC9), immunoprecipitation, and immunofluorescence. In SCI and OGD injured NSC34 or primary cultured neurons, neuronal nuclear DNA damage induced the SUMOylation of Lamin B1, which was required by the nuclear Lamina accumulation of UBC9. Furthermore, LC3/Atg8, an autophagy-related protein, directly bound to SUMOylated Lamin B1, and delivered Lamin B1 to the lysosome. Knockdown or suppression of UBC9 with siRNA or 2-D08 inhibited SUMOylation of Lamin B1 and subsequent nucleophagy and protected against neuronal death. Upon neuronal DNA damage and leakage after SCI, SUMOylation of Lamin B1 is induced by nuclear Lamina accumulation of UBC9. Furthermore, it promotes LC3-Lamin B1 interaction to trigger nucleophagy that protects against neuronal DNA damage.

Tuning Local Atomic Structures in MoS2 Based Catalysts for Electrochemical Nitrate Reduction.

In recent years, there has been a substantial surge in the investigation of transition-metal dichalcogenides such as MoS2 as a promising electrochemical catalyst. Inspired by denitrification enzymes such as nitrate reductase and nitrite reductase, the electrochemical nitrate reduction catalyzed by MoS2 with varying local atomic structures is reported. It is demonstrated that the hydrothermally synthesized MoS2 containing sulfur vacancies behaves as promising catalysts for electrochemical denitrification. With copper doping at less than 9% atomic ratio, the selectivity of denitrification to dinitrogen in the products can be effectively improved. X-ray absorption characterizations suggest that two sulfur vacancies are associated with one copper dopant in the MoS2 skeleton. DFT calculation confirms that copper dopants replace three adjacent Mo atoms to form a trigonal defect-enriched region, introducing an exposed Mo reaction center that coordinates with Cu atom to increase N2 selectivity. Apart from the higher activity and selectivity, the Cu-doped MoS2 also demonstrates remarkably improved tolerance toward oxygen poisoning at high oxygen concentration. Finally, Cu-doped MoS2 based catalysts exhibit very low specific energy consumption during the electrochemical denitrification process, paving the way for potential scale-up operations.

Tespa1 is involved in late thymocyte development through the regulation of TCR-mediated signaling.

Signaling via the T cell antigen receptor (TCR) during the CD4(+)CD8(+) double-positive developmental stage determines thymocyte selection and lineage commitment. Here we describe a previously uncharacterized T cell-expressed protein, Tespa1, with critical functions during the positive selection of thymocytes. Tespa1(-/-) mice had fewer mature thymic CD4(+) and CD8(+) T cells, which reflected impaired thymocyte development. Tespa1 associated with the TCR signaling components PLC-γ1 and Grb2, and Tespa1 deficiency resulted in attenuated TCR signaling, as reflected by defective activation of the Erk-AP-1 and Ca(2+)-NFAT pathways. Our findings demonstrate that Tespa1 is a component of the TCR signalosome and is essential for T cell selection and maturation through the regulation of TCR signaling during T cell development.

Identification and pathogenicity of Fusarium spp. associated with tea wilt in Zhejiang Province, China.

BACKGROUND: Tea is one of the most widely consumed beverages in the world, with significant economic and cultural value. However, tea production faces many challenges due to various biotic and abiotic stresses, among which fungal diseases are particularly devastating. RESULTS: To understand the identity and pathogenicity of isolates recovered from tea plants with symptoms of wilt, phylogenetic analyses and pathogenicity assays were conducted. Isolates were characterized to the species level by sequencing the ITS, tef-1α, tub2 and rpb2 sequences and morphology. Four Fusarium species were identified: Fusarium fujikuroi, Fusarium solani, Fusarium oxysporum, and Fusarium concentricum. The pathogenicity of the Fusarium isolates was evaluated on 1-year-old tea plants, whereby F. fujikuroi OS3 and OS4 strains were found to be the most virulent on tea. CONCLUSIONS: To the best of our knowledge, this is the first report of tea rot caused by F. fujikuroi in the world. This provides the foundation for the identification and control of wilt disease in tea plants.

Understanding the Chemomechanical Function of the Silver-Carbon Interlayer in Sheet-type All-Solid-State Lithium-Metal Batteries.

All-solid-state batteries with lithium metal anodes hold great potential for high-energy battery applications. However, forming and maintaining stable solid-solid contact between the lithium anode and solid electrolyte remains a major challenge. One promising solution is the use of a silver-carbon (Ag-C) interlayer, but its chemomechanical properties and impact on interface stabilities need to be comprehensively explored. Here, we examine the function of Ag-C interlayers in addressing interfacial challenges using various cell configurations. Experiments show that the interlayer improves interfacial mechanical contact, leading to a uniform current distribution and suppressing lithium dendrite growth. Furthermore, the interlayer regulates lithium deposition in the presence of Ag particles via improved Li diffusivity. The sheet-type cells with the interlayer achieve a high energy density of 514.3 Wh L-1 and an average Coulombic efficiency of 99.97% over 500 cycles. This work provides insights into the benefits of using Ag-C interlayers for enhancing the performance of all-solid-state batteries.

The role of Nod-like receptor protein 3 inflammasome activated by ion channels in multiple diseases.

The inflammasome is a multimeric protein complex located in the cytoplasm that is activated by many factors and subsequently promotes the release of proinflammatory factors such as interleukin (IL)-1ß and IL-18, resulting in a series of inflammatory responses that ultimately lead to the occurrence of various diseases. The Nod-like receptor protein 3 (NLRP3) inflammasome is the most characteristic type and the most widely studied among many inflammasomes. Activation of the NLRP3 inflammasome is closely related to the occurrence of many diseases, such as Alzheimer's disease. At present, a large number of studies have focused on the mechanisms underlying the activation of the NLRP3 inflammasome. Plenty of articles have reported the activation of the NLRP3 inflammasome by various ions, such as K+ and Na+ reflux and Ca2+ influx. However, few articles have reviewed the effects of various ion channels on the activation of the NLRP3 inflammasome and the relationship between the diseases caused by these proteins. This article mainly summarizes the relationship between intracellular and extracellular ion activities and ion channels and the activation of the NLRP3 inflammasome. We also provide a general summary of the diseases of each system caused by NLRP3 activation. We hope that more research will provide options for the treatment of diseases driven by the NLRP3 inflammasome.

Beneficial effects of dietary capsaicin in gastrointestinal health and disease.

Chili pepper and its major active compound capsaicin have long been used not only a daily food additive but also medication worldwide. Like in other human organs and systems, capsaicin has multiple actions in gastrointestinal (GI) physiology and pathology. Numerous studies have revealed that capsaicin acts on GI tract in TRPV1-dependent and -independent manners, mostly depending on its consumption concentrations. In this review, we will focus on the beneficial role of capsaicin in GI tract, a less highlighted aspect, in particular how dietary capsaicin affects GI health, the mechanisms of actions and its preventive/therapeutic potentials to several GI diseases. Dietary capsaicin affects GI tract not only via TRPV1-derpendent and independent manners, but also via acute and chronic effects. Although high dose intake of dietary capsaicin is harmful to human health sometimes, current literatures suggest that appropriate dose intake is likely beneficial to GI health and is preventive/therapeutic to GI disease in most cases as well. With extensive and intensive studies on its GI actions, capsaicin, as a daily consumed food additive, has potential to become a safe drug for the treatment of several GI diseases.

Ultra-high-performance liquid chromatography-tandem mass spectrometry-based metabolomics unveils the metabolic alterations in colon cancer mice during CT-guided radiofrequency ablation.

Colon cancer (CC) is a malignancy of the digestive tract, and computed tomography (CT)-guided radiofrequency ablation (RFA) has been extensively adopted in cancer treatment. We aimed to explore the changes in fecal metabolism after CT-guided RFA in CC mice. The orthotopic CC mice received CT-guided RFA upon modeling. Subsequently, we quantified tumor volumes and weights to assess treatment efficacy. Next, because metabolomics is useful for evaluating therapeutic validity, feces were collected for metabolomics analysis. CT-guided RFA inhibited tumor growth effectively. Additionally, metabolomics results showed that the contents of bile acids and fatty acids were downregulated in CC mouse feces. Moreover, the levels of amino acids and carbohydrates were decreased while the levels of fatty acids, organic acids, phenols, pyridines and short-chain fatty acids were elevated in feces after CC mice received CT-guided RFA. Pathway enrichment analysis revealed that those differential metabolites were closely related to fatty acids degradation and synthesis. CT-guided RFA possesses a strong ability to suppress CC development in mice, accompanied by a significant increase of fatty acid content in feces. This study proposes a novel approach and target for CC treatment, which provides hope for CC patients and establishes a solid basis for future in-depth studies.

First worldwide report of Exserohilum rostratum causing leaf spot on strawberry (Fragaria × ananassa Duch.).

During April 2022, leaf spot was observed on strawberry (Fragaria × ananassa Duch.) with a disease incidence of approximately 45% among 100 plants. Strawberry was cultivated in a nursery at Huzhou University (30.87゜N, 120.13゜E), Zhejiang Province, China. In the strawberry greenhouse, the average temperature was 15-18 degrees, 40%-60% humidity. Early symptoms appeared as dark brown or black spotted necrotic lesions, which expanded from 2 to 6 mm in diameter. Dark brown spots with yellow halos occupied half of the leaf area and eventually developed leaf blight with large yellow halos. To isolate the causal agent, 0.5 cm x 0.5 cm fragments were cut from three symptomatic leaves, and were surface sterilized with 75% ethanol for 30 s and then rinsed three times with sterilized water. The airdried leaf fragments were placed on PDA with 50 µg/ml ampicillin and incubated in the dark at 25℃ for two days. Isolates were obtained by transferring hyphal plugs of 1 mm in diameter onto PDA. The colony morphology was circular and dark brown on the upperside and black on the underside, with cottony mycelium and an large amount of gray aerial mycelium. Conidia were large, light olive-brown to dark olive-brown and light olive-black and septate. The typical conidia were oval or rod-shaped, rarely curved, and dark septa defined the basal and apical cells. In the two typical forms of conidia, the average size of oval conidia was approximately 18.77 × 54.92 µm (11.99 to 26.97 × 35.13 to 74.59 µm, n = 20), and the average size of the rod-shaped conidia was approximately 14.80 × 103.24 µm (11.24 to 24.64 × 73.11 to 131.51 µm, n = 20). The morphological characteristics matched well with previous descriptions of Exserohilum rostratum (Sharma et al. 2014; Liu et al. 2021). The identity of C1-L and C1-S from symptomatic tissues was confirmed by means of multi-locus gene sequencing. Genomic DNA was extracted from the mycelium using the CTAB (cetyltrimethylammonium bromide) method (Griffith & Shaw 1998). Molecular identification was conducted by sequencing the internal transcribed spacer (ITS) rDNA region, partial glyceraldehyde-3-phosphate dehydrogenase (GAPDH) gene, partial actin (ACT) gene, and partial beta-tubulin 2 (TUB2), using the primers ITS1/ITS4 (White et al. 1990), GDF/GDR (Templeton et al. 1992), ACT512F/ACT783R (Carbone and Kohn 1999), T1 (O'Donnell and Cigelnik 1997) and Bt2b (Glass and Donaldson, 1995). The obtained sequences of C1-L and C1-S were the same. Moreover, the sequences have been deposited in GenBank under accession numbers ON982516 (ITS), ON996915 (GAPDH), ON996916 (ACT), and ON996917 (TUB2). The results of Basic Local Alignment Search Tool (BLAST) analysis revealed that the ITS, GAPDH, and ACT had 100% identity with the sequences of E. rostratum (GenBank Accession No. LT837834, LT883550, and LT837672, respectively), the TUB2 had 99.61% similarity with BLAST sequences of E. rostratum (LT899391). These morphological characteristics and molecular analyses allowed the identification of the pathogen as E. rostratum. Koch's postulates were performed with five healthy detached strawberry leaves with three inoculations per leaf of the 'Akihime' strawberry variety. Surface-sterilized leaves were wounded with an aseptic needle, and inoculated with 2 mm diameter mycelial plugs from 5-day-old cultures of E. rostratum. Control leaves were also wounded with the aseptic needle, and inoculated with a sterile PDA agar plug. The leaves were incubated at 25℃ in Petri plates with petioles wrapped in moist sterile cotton. The diseased symptoms included black spots on the epidermis of the wounded leaves within 5, 10, and 20 days after inoculation. Mock-inoculated controls remained asymptomatic, and three biological repetitions were conducted. The fungus reisolated from the diseased leaves was confirmed as E. rostratum by sequencing. Abundant reports have shown that E. rostratum can infect many economically important crops such as maize, rice, and pineapple (Sun et al. 2021; Kabore et al. 2022; Luo et al. 2012). To the best of our knowledge, this is the first report of E. rostratum on strawberry in China and worldwide.

3D-printed silica with nanoscale resolution.

Fabricating inorganic materials with designed three-dimensional nanostructures is an exciting yet challenging area of research and industrial application. Here, we develop an approach to 3D print high-quality nanostructures of silica with sub-200 nm resolution and with the flexible capability of rare-earth element doping. The printed SiO2 can be either amorphous glass or polycrystalline cristobalite controlled by the sintering process. The 3D-printed nanostructures demonstrate attractive optical properties. For instance, the fabricated micro-toroid optical resonators can reach quality factors (Q) of over 104. Moreover, and importantly for optical applications, doping and codoping of rare-earth salts such as Er3+, Tm3+, Yb3+, Eu3+ and Nd3+ can be directly implemented in the printed SiO2 structures, showing strong photoluminescence at the desired wavelengths. This technique shows the potential for building integrated microphotonics with silica via 3D printing.

Five Mesoporous Lanthanide Metal-Organic Frameworks: Syntheses, Structures, and Fluorescence Sensing of Fe3+, Cr2O72-, and H2O2 and Electrochemical Sensing of Trinitrophenol.

When a multicarboxylate aromatic ligand, 3,5-di(2',4'-dicarboxylphenyl)benzoic acid (H5L), was employed, five structurally similar lanthanide metal-organic frameworks (Ln-MOFs), {[Pr10L6(OH)3Cl(H2O)6]·4C2H8N}n (1), {[Nd10L6(OH)4 (H2O)9]·4C2H8N}n (2), {[Gd10L6(OH)4(H2O)3]·4C2H8N}n (3), {[Ho10L6(OH)4 (H2O)3]·4C2H8N}n (4) and {[Er10L6(OH)4(H2O)6]·4C2H8N}n (5), were synthesized and characterized. Single-crystal X-ray structural analyses disclosed that all five Ln-MOFs crystallize in the trigonal R3 space group. They have three-dimensional mesoporous structure featuring the coexistence of binuclear and tetranuclear species as inorganic building units. The mesoporous structure of 3 was verified by the gas adsorption experiment of N2. Fluorescence analysis showed that 3 can selectively detect Fe3+, Cr2O72-, and H2O2; furthermore, it can be used for the electrochemical detection of trinitrophenol. With the merit of an excellent highly sensitive detection performance, 3 has unpredictable application prospects in future research fields.

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells.

Three-dimensional organic-inorganic perovskites have emerged as one of the most promising thin-film solar cell materials owing to their remarkable photophysical properties, which have led to power conversion efficiencies exceeding 20 per cent, with the prospect of further improvements towards the Shockley-Queisser limit for a single­junction solar cell (33.5 per cent). Besides efficiency, another critical factor for photovoltaics and other optoelectronic applications is environmental stability and photostability under operating conditions. In contrast to their three-dimensional counterparts, Ruddlesden-Popper phases--layered two-dimensional perovskite films--have shown promising stability, but poor efficiency at only 4.73 per cent. This relatively poor efficiency is attributed to the inhibition of out-of-plane charge transport by the organic cations, which act like insulating spacing layers between the conducting inorganic slabs. Here we overcome this issue in layered perovskites by producing thin films of near-single-crystalline quality, in which the crystallographic planes of the inorganic perovskite component have a strongly preferential out-of-plane alignment with respect to the contacts in planar solar cells to facilitate efficient charge transport. We report a photovoltaic efficiency of 12.52 per cent with no hysteresis, and the devices exhibit greatly improved stability in comparison to their three-dimensional counterparts when subjected to light, humidity and heat stress tests. Unencapsulated two-dimensional perovskite devices retain over 60 per cent of their efficiency for over 2,250 hours under constant, standard (AM1.5G) illumination, and exhibit greater tolerance to 65 per cent relative humidity than do three-dimensional equivalents. When the devices are encapsulated, the layered devices do not show any degradation under constant AM1.5G illumination or humidity. We anticipate that these results will lead to the growth of single-crystalline, solution-processed, layered, hybrid, perovskite thin films, which are essential for high-performance opto-electronic devices with technologically relevant long-term stability.

Phosphatase PP2A is essential for TH17 differentiation.

Phosphatase PP2A expression levels are positively correlated to the clinical severity of systemic lupus erythematosus (SLE) and IL17A cytokine overproduction, indicating a potential role of PP2A in controlling TH17 differentiation and inflammation. By generating a mouse strain with ablation of the catalytic subunit α of PP2A in peripheral mature T cells (PP2A cKO), we demonstrate that the PP2A complex is essential for TH17 differentiation. These PP2A cKO mice had reduced TH17 cell numbers and less severe disease in an experimental autoimmune encephalomyelitis (EAE) model. PP2A deficiency also ablated C-terminal phosphorylation of SMAD2 but increased C-terminal phosphorylation of SMAD3. By regulating the activity of RORγt via binding, the changes in the phosphorylation status of these R-SMADs reduced Il17a gene transcription. Finally, PP2A inhibitors showed similar effects on TH17 cells as were observed in PP2A cKO mice, i.e., decreased TH17 differentiation and relative protection of mice from EAE. Taken together, these data demonstrate that phosphatase PP2A is essential for TH17 differentiation and that inhibition of PP2A could be a possible therapeutic approach to controlling TH17-driven autoimmune diseases.

Protein phosphatase 2A has an essential role in promoting thymocyte survival during selection.

The development of thymocytes to mature T cells in the thymus is tightly controlled by cellular selection, in which only a small fraction of thymocytes equipped with proper quality of TCRs progress to maturation. It is pivotal to protect the survival of the few T cells, which pass the selection. However, the signaling events, which safeguard the cell survival in thymus, are not totally understood. In this study, protein Ser/Thr phosphorylation in thymocytes undergoing positive selection is profiled by mass spectrometry. The results revealed large numbers of dephosphorylation changes upon T cell receptor (TCR) activation during positive selection. Subsequent substrate analysis pinpointed protein phosphatase 2A (PP2A) as the enzyme responsible for the dephosphorylation changes in developing thymocytes. PP2A catalytic subunit α (Ppp2ca) deletion in the T cell lineage in Ppp2caflox/flox-Lck-Cre mice (PP2A cKO) displayed dysregulated dephosphorylation of apoptosis-related proteins in double-positive (DP) cells and caused substantially decreased numbers of DP CD4+ CD8+ cells. Increased levels of apoptosis in PP2A cKO DP cells were found to underlie aberrant thymocyte development. Finally, the defective thymocyte development in PP2A cKO mice could be rescued by either Bcl2 transgene expression or by p53 knockout. In summary, our work reveals an essential role of PP2A in promoting thymocyte development through the regulation of cell survival.

Mechanical Anisotropy in Two-Dimensional Selenium Atomic Layers.

Two-dimensional (2D) trigonal selenium (t-Se) has become a new member in 2D semiconducting nanomaterial families. It is composed of well-aligned one-dimensional Se atomic chains bonded via van der Waals (vdW) interaction. The contribution of this unique anisotropic nanostructure to its mechanical properties has not been explored. Here, for the first time, we combine experimental and theoretical analyses to study the anisotropic mechanical properties of individual 2D t-Se nanosheets. It was found that its fracture strength and Young's modulus parallel to the atomic chain direction are much higher than along the transverse direction, which was attributed to the weak vdW interaction between Se atomic chains as compared to the covalent bonding within individual chains. Additionally, two distinctive fracture modes along two orthogonal loading directions were identified. This work provides important insights into the understanding of anisotropic mechanical behaviors of 2D semiconducting t-Se and opens new possibilities for future applications.