Classification of Schmorl's nodes of the lumbar spine and association with disc degeneration: a large-scale population-based MRI study.

OBJECTIVE: Schmorl's nodes (SN) are highly associated with lumbar disc degeneration (DD). However, SN present with different morphologies/topographies that may be associated with varying degrees of DD. This study proposed a classification of SN to determine their morphological/topographical prevalence and association with the severity of DD. METHODS: Sagittal T2-weighted MRIs were assessed to identify SN and additional imaging findings from L1-S1 in 2,449 individuals. SN characteristics were classified by six criteria: disc level; endplate involvement; shape; size; location of endplate zone; and the presence of marrow changes. Hierarchical clustering was performed to identify distinct SN characteristics with endplate patterns. RESULTS: Good to excellent observer classification reliability was noted. SN most commonly presented at the L1 and L2 disc levels, and entailed one-third of the endplate, predominantly the middle zone. Round shape (39.2%) was the most common SN shape. Four specific SN and endplate linkage patterns were identified. 8.3% of identified SN (n = 960) were "Atypical SN". Multivariable regression showed that "Typical SN" and "Atypical SN", depending on levels, were associated with an adjusted 2- to 4-fold and a 5- to 13-fold higher risk of increased severity of DD, respectively (p < 0.05). CONCLUSIONS: This is the first large-scale magnetic resonance imaging (MRI) study to propose a novel SN classification. Specific SN-types were identified, which were associated with more severe DD. This study further broadens our understanding of the role of SN and degrees of DD, further expanding on the SN phenotyping that can be internationally adopted for utility assessment.

The role of cryopreservation in the biomechanical properties of the intervertebral disc.

Implantation of intervertebral disc (IVD) allograft or tissue engineered disc constructs in the spine has emerged as an alternative to artificial disc replacement for the treatment of severe degenerative disc disease (DDD). Establishment of a bank of cryopreserved IVD allografts enables size matching and facilitates logistics for effective clinical management. However, the biomechanical properties of cryopreserved IVDs have not been previously reported. This study aimed to assess if cryopreservation with different concentrations of cryopreservant agents (CPA) would affect the dynamic viscoelastic properties of the IVD. Whole porcine lumbar IVDs (n = 40) were harvested and processed using various concentrations of CPA, 0 % CPA, 10 % CPA and 20 % CPA. The discs were cryopreserved using a stepwise freezing protocol and stored in liquid nitrogen. After four weeks of storage, the cryopreserved IVDs were quickly thawed at 37 °C for dynamic viscoelastic testing. The apparent modulus, elastic modulus (G'), viscous modulus (G") and loss modulus (G"/G') were calculated and compared to a fresh control group. Cryopreserved IVD without cryopreservants was significantly stiffer than the control. In the dynamic viscoelastic testing, cryopreservation with the use of CPA was able to preserve both G' and G" of an IVD. No significant differences were found between fresh IVD and IVD cryopreserved with 10 % CPA or 20 % CPA. This study demonstrated that CPAs at an optimal concentration could preserve the mechanical properties of the IVD allograft and can provide further credence for the application of long-term storage of IVD allografts for disc transplantation or tissue engineered construct applications.

A three-month, open-label, single-arm trial evaluating the safety and pharmacokinetics of oral lithium in patients with chronic spinal cord injury.

OBJECTIVES: Lithium has recently been found to enhance neuronal regeneration and differentiation. This arouses its potential use to treat spinal cord injury patients. The safety and pharmacokinetics of lithium are not verified for this group of patients as their internal organ functions may change. This is a phase 1 clinical trial to evaluate the safety and pharmacokinetics of lithium in spinal cord injury patients. METHODS: A total of 20 chronic spinal cord injury subjects were recruited. Oral lithium carbonate was given in divided dose to maintain the serum lithium level 0.6-1.2 mmol l(-1) for 6 weeks. Safety parameters, adverse events and pharmacokinetic data were carefully collected and monitored. RESULTS: No severe adverse event was documented. All blood parameters remained stable. Nausea and vomiting were the most common complaints but tolerance was improved in 2 weeks for most subjects. A wide range of oral doses was required to maintain serum lithium level at the targeted range. However, the dose for individual subject was relatively constant. CONCLUSION: This phase 1 clinical trial is the first report indicating the safety of lithium in chronic spinal cord injury patients. It is well tolerated after the first 2 weeks. Individual titration of lithium is essential to maintain an optimal serum lithium level but once the desirable level is achieved, the oral dose remains relatively unchanged for maintenance.

Geriatric hip fracture clinical pathway: the Hong Kong experience.

Geriatric hip fracture is one of the commonest fractures in orthopaedic trauma. There is a trend of further increase in its incidence in the coming decades. Besides the development of techniques and implants to overcome the difficulties in fixation of osteoporosis bone, the general management of the hip fracture is also very challenging in terms of the preparation of the generally poorer pre-morbid state and complicate social problems associated with this group of patients. In order to cope with the increasing demand, our hospital started a geriatric hip fracture clinical pathway in 2007. The aim of this pathway is to provide better care for this group of patients through multidisciplinary approach. From year 2007 to 2009, we had managed 964 hip fracture patients. After the implementation of the pathway, the pre-operative and the total length of stay in acute hospital were shortened by over 5 days. Other clinical outcomes including surgical site infection, 30 days mortality and also incidence of pressure sore improved when compared to the data before the pathway. The rate of surgical site infection was 0.98%, and the 30 days mortality was 1.67% in 2009. The active participation of physiotherapists, occupational therapists as well as medical social workers also helped to formulate the discharge plan as early as the patient is admitted. In conclusion, a well-planned and executed clinical pathway for hip fracture can improve the clinical outcomes of the geriatric hip fractures.

Nano-scale surface morphology, wettability and osteoblast adhesion on nitrogen plasma-implanted NiTi shape memory alloy.

Plasma immersion ion implantation (PIII) is an effective method to increase the corrosion resistance and inhibit nickel release from orthopedic NiTi shape memory alloy. Nitrogen was plasma-implanted into NiTi using different pulsing frequencies to investigate the effects on the nano-scale surface morphology, structure, wettability, as well as biocompatibility. X-ray photoelectron spectroscopy (XPS) results show that the implantation depth of nitrogen increases with higher pulsing frequencies. Atomic force microscopy (AFM) discloses that the nano-scale surface roughness increases and surface features are changed from islands to spiky cones with higher pulsing frequencies. This variation in the nano surface structures leads to different surface free energy (SFE) monitored by contact angle measurements. The adhesion, spreading, and proliferation of osteoblasts on the implanted NiTi surface are assessed by cell culture tests. Our results indicate that the nano-scale surface morphology that is altered by the implantation frequencies impacts the surface free energy and wettability of the NiTi surfaces, and in turn affects the osteoblast adhesion behavior.

Spinal cord compression secondary to brown tumour in a patient on long-term haemodialysis: a case report.

Brown tumours may occur secondary to hyperparathyroidism in patients with chronic renal failure (CRF). Diagnosing a spinal brown tumour causing cord compression requires a high index of suspicion. We report a 65-year-old woman, who had been on haemodialysis for CRF for over 10 years, who presented with leg weakness and back pain over the thoracolumbar junction. She had a brown tumour at T8 causing subacute spinal cord compression. Ambulation was regained after surgical decompression and stabilisation. Adherence to the National Kidney Foundation guidelines in the management of patients with CRF may prevent renal osteodystrophy. Treatment of spinal brown tumour depends on the severity of the neurological deficit. Remineralization is expected after correction of the parathyroid level, thus negating the need for total excision of the parathyroid glands.

Age-related degeneration of lumbar intervertebral discs in rabbits revealed by deuterium oxide-assisted MRI.

OBJECTIVES: Intervertebral disc (IVD) degeneration is associated with a loss of disc water content and change in biochemical composition of the disc. Rabbit is a frequently used model to evaluate the efficacy of therapeutics for disc degeneration. This study addresses whether rabbits undergo age-related disc degeneration, assessed using deuterium oxide-assisted magnetic resonance imaging (MRI) of the lumbar IVDs. MATERIALS AND METHODS: The lumbar spines of adolescent, adult, and aged rabbits (6-36 months) were subjected to T2-weighted/short-tau inversion recovery (STIR) MRI scan along with water-deuterium oxide (H(2)O:D(2)O) dilutions. The total and maximum H(2)O:D(2)O index (HDi) of the lumbar IVDs were determined and compared between disc levels at different ages. RESULTS: Adolescent rabbit lumbar discs had similar total HDi, suggesting the hydration and biochemical composition was similar among the lumbar levels. With the use of H(2)O:D(2)O reference, the discs were shown to undergo continual decrease in signal with aging which non-calibrated measurement method could not reveal. The HDi decrease rate was higher at the caudal than cranial levels. CONCLUSION: This study provided in vivo evidence of age-related progressive disc degenerative change in rabbit lumbar discs, suggesting aged rabbits can be considered as a natural disc degeneration model in disc regeneration studies. However, it is important to select proper disc levels as intra-subject controls due to different rates of degenerative changes between caudal and cranial levels.

Extracellular matrix stability of primary mammalian chondrocytes and intervertebral disc cells cultured in alginate-based microbead hydrogels.

Three-dimensional alginate constructs are widely used as carrier systems for transplantable cells. In the present study, we evaluated the chondrogenic matrix stability of primary rat chondrocytes and intervertebral disc (IVD) cells cultured in three different alginate-based microbead matrices to determine the influence of microenvironment on the cellular and metabolic behaviors of chondrogenic cells confined in alginate microbeads. Cells entrapped in calcium, strontium, or barium ion gelled microbeads were monitored with the live/dead dual fluorescent cell viability assay kit and the 1,9-dimethylmethylene blue (DMB) assay designed to evaluate sulfated glycosaminoglycan (s-GAG) production. Expression of chondrogenic extracellular matrix (ECM) synthesis was further evaluated by semiquantitative RT-PCR of sox9, type II collagen, and aggrecan mRNAs. Results indicate that Ca and Sr alginate maintained significantly higher population of living cells compared to Ba alginate (p < 0.05). Production of s-GAG was similarly higher in Ca and Sr alginate microbead cultures compared to Ba alginate microbeads. Although there was no significant difference between strontium and calcium up to day 14 of culture, Sr alginate showed remarkably improved cellular and metabolic activities on long-term cultures, with chondrocytes expressing as much as 31% and 44% greater s-GAG compared to calcium and barium constructs, respectively, while IVD cells expressed 63% and 74% greater s-GAG compared to calcium and barium constructs, respectively, on day 28. These findings indicate that Sr alginate represent a significant improvement over Ca- and Ba alginate microbeads for the maintenance of chondrogenic phenotype of primary chondrocytes and IVD cells.

Phenotypic and population differences in the association between CILP and lumbar disc disease.

BACKGROUND: Lumbar disc disease (LDD) is one of the leading causes of disability in the working-age population. A functional single-nucleotide polymorphism (SNP), +1184T-->C, in exon 8 of the cartilage intermediate layer protein gene (CILP) was recently identified as a risk factor for LDD in the Japanese population (odds ratio (OR) 1.61, 95% CI 1.31 to 1.98), with implications for impaired transforming growth factorbeta1 signalling. AIM: To validate this finding in two different ethnic cohorts with LDD. METHODS: This SNP and flanking SNPs were analysed in 243 Finnish patients with symptoms of LDD and 259 controls, and in 348 Chinese subjects with MRI-defined LDD and 343 controls. RESULTS AND CONCLUSION: The results showed no evidence of association in the Finnish (OR = 1.35, 95% CI 0.97 to 1.87; p = 0.14) or the Chinese (OR = 1.05, 95% CI 0.77 to 1.43; p = 0.71) samples, suggesting that cartilage intermediate layer protein gene is not a major risk factor for symptoms of LDD in Caucasians or in the general population that included individuals with or without symptoms.

Spinal epidural hematoma in a scoliotic patient with long fusion: a case report.

BACKGROUND CONTEXT: This is the only reported case on a spinal epidural hematoma occurring in a fused scoliotic segment. PURPOSE: To report the first case of a spinal epidural hematoma developed within the fused segment of a scoliotic curve and to raise clinicians' awareness of the pathology of a spinal epidural hematoma. STUDY DESIGN/SETTING: A case report. PATIENT SAMPLE: A 53-year-old woman with long spinal fusion for severe kyphoscoliosis diagnosed as a teenager. OUTCOME MEASURES: Neurological improvement and clinical follow-up for any occult spinal fracture. METHODS: A patient was surgically treated for a spinal epidural hematoma causing paraparesis. Clinical and radiological features were reported. RESULTS: The etiology of this case could not be defined, although the patient had a minor fall injury. Radiography and computed tomography scans could not detect any obvious fracture. Magnetic resonance imaging showed typical features of an epidural hematoma. After the hematoma evacuation, the patient's neurology gradually improved. CONCLUSIONS: Long fusion, differential stiffness along the fusion block, implant removal, and significant residual deformity may increase the risk of an epidural hematoma formation after trivial trauma without an obvious fracture on imaging. Clinicians should be mindful of this possibility and look out for any hematoma in the fused segment(s).

Right hip adduction deficit and adolescent idiopathic scoliosis.

PURPOSE: To determine whether right hip adduction deficit is associated with adolescent idiopathic scoliosis. METHODS: 102 adolescents (mean age, 14 years) with idiopathic scoliosis were prospectively studied. Their spinal curve pattern (according to Lenke's classification), curve severity (by Cobb's angle), and hip adduction ranges of both sides were recorded. Additional factors that may affect hip adduction range including the preferred leg during standing, the presence of hip flexor tightness, and the side of the dominant leg were also assessed. RESULTS: The mean Cobb's angle was 27 degrees. The difference in hip adduction range between the right and left hips was 5 degrees (p<0.05). Of 102 patients, 64 had an adduction range deficit of the right hip, 4 of the left hip, and 34 had no difference. Patients with >10 degrees of right hip adduction deficit were associated with a higher proportion of left leg dominance than those with less than or equal to 10 degrees of right hip adduction deficit (18% vs 4%). CONCLUSION: Left leg dominance may play a role in right hip adduction deficit and scoliosis.

Chemical composition, crystal size and lattice structural changes after incorporation of strontium into biomimetic apatite.

Recently, strontium (Sr) as ranelate compound has become increasingly popular in the treatment of osteoporosis. However, the lattice structure of bone crystal after Sr incorporation is yet to be extensively reported. In this study, we synthesized strontium-substituted hydroxyapatite (Sr-HA) with different Sr content (0.3%, 1.5% and 15% Sr-HA in mole ratio) to simulate bone crystals incorporated with Sr. The changes in chemical composition and lattice structure of apetite after synthetic incorporation of Sr were evaluated to gain insight into bone crystal changes after incorporation of Sr. X-ray diffraction (XRD) patterns revealed that 0.3% and 1.5% Sr-HA exhibited single phase spectrum, which was similar to that of HA. However, 15% Sr-HA induced the incorporation of HPO4(2-) and more CO3(2-), the crystallinity reduced dramatically. Transmission electron microscopy (TEM) images showed that the crystal length and width of 0.3% and 1.5% Sr-HA increased slightly. Meanwhile, the length and width distribution were broadened and the aspect ratio decreased from 10.68+/-4.00 to 7.28+/-2.80. The crystal size and crystallinity of 15% Sr-HA dropped rapidly, which may suggest that the fundamental crystal structure is changed. The findings from this work indicate that current clinical dosage which usually results in Sr incorporation of below 1.5% may not change chemical composition and lattice structure of bone, while it will broaden the bone crystal size distribution and strengthen the bone.

Mechanical properties of femoral cortical bone following cemented hip replacement.

Femoral bone remodeling following total hip replacement is a big concern and has never been examined mechanically. In this study, six goats underwent unilateral cemented hip hemiarthroplasty with polymethyl methacrylate (PMMA) bone cement. Nine months later animals were sacrificed, and the femoral cortical bone slices at different levels were analysed using microhardness testing and microcomputed tomography (micro-CT) scanning. Implanted femurs were compared to contralateral nonimplanted femurs. Extensive bone remodeling was demonstrated at both the proximal and middle levels, but not at the distal level. Compared with the nonimplanted side, significant decreases were found in the implanted femur in cortical bone area, bone mineral density, and cortical bone hardness at the proximal level, as well as in bone mineral density and bone hardness at the middle level. However, no significant difference was observed in either variable for the distal level. In addition, similar proximal-to-distal gradient changes were revealed both in cortical bone microhardness and bone mineral density. From the mechanical point of view, the results of the present study suggested that stress shielding is an important mechanical factor associated with bone adaptation following total hip replacement.

Effect of weight-bearing on bone-bonding behavior of strontium-containing hydroxyapatite bone cement.

The purpose of this study was to investigate and compare the chemical composition and nanomechanical properties at the bone-cement interface under non-weight-bearing and weight-bearing conditions, in order to understand the effect of weight-bearing on the bone-bonding behavior of strontium-containing hydroxyapatite (Sr-HA) cement. In one group, Sr-HA cement was injected into rabbit ilium (under non-weight-bearing conditions). Unilateral hip replacement was performed with Sr-HA cement (under weight-bearing conditions) in the other group. Six months later, scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) analysis and nanoindentation tests were conducted on the interfaces between cancellous bone and the Sr-HA cement. The nanoindentation results revealed two different transitional behaviors under different conditions. nder weight-bearing conditions, both the Young modulus and hardness at the interface were considerably higher than those at either the Sr-HA cement or cancellous bone. On the contrary, under non-weight-bearing conditions, both the Young modulus and hardness values at the interface were lower than those at the cancellous bone, but were higher than the Sr-HA cement. In addition, EDX results showed that the calcium and phosphorus contents at the interface under weight-bearing conditions were considerably higher than those under non-weight-bearing conditions. The differences in chemical composition and nanomechanical properties at the cement-bone interface under two different conditions indicate that weight-bearing produces significant effects on the bone-bonding behavior of the Sr-HA cement.

Nickel release behavior, cytocompatibility, and superelasticity of oxidized porous single-phase NiTi.

Porous NiTi shape memory alloys are one of the promising biomaterials for surgical implants because of their unique shape memory effects and porous structure with open pores. However, the complex surface morphology and larger area of porous NiTi compared to dense NiTi make it more vulnerable from the viewpoint of release of nickel, which can cause deleterious effects in the human body. It is also more difficult to modify the exposed surfaces of a porous structure using conventional surface modification technologies. In this work, oxidation in conjunction with postreaction heat treatment was used to modify the surfaces of porous single-phase NiTi prepared by capsule-free hot isostatic pressing to mitigate Ni leaching and enhance the surface properties. Differential scanning calorimetry thermal analysis, uniaxial compression tests, inductively-coupled plasma mass spectrometry, and cell cultures reveal that porous NiTi alloys oxidized at 450 degrees C for 1 h have an austenite transition temperature below 37 degrees C, excellent superelasticity, lower nickel release, and no cytotoxicity.

Surface mechanical properties, corrosion resistance, and cytocompatibility of nitrogen plasma-implanted nickel-titanium alloys: a comparative study with commonly used medical grade materials.

Stainless steel and titanium alloys are the most common metallic orthopedic materials. Recently, nickel-titanium (NiTi) shape memory alloys have attracted much attention due to their shape memory effect and super-elasticity. However, this alloy consists of equal amounts of nickel and titanium, and nickel is a well known sensitizer to cause allergy or other deleterious effects in living tissues. Nickel ion leaching is correspondingly worse if the surface corrosion resistance deteriorates. We have therefore modified the NiTi surface by nitrogen plasma immersion ion implantation (PIII). The surface chemistry and corrosion resistance of the implanted samples were studied and compared with those of the untreated NiTi alloys, stainless steel, and Ti-6Al-4V alloy serving as controls. Immersion tests were carried out to investigate the extent of nickel leaching under simulated human body conditions and cytocompatibility tests were conducted using enhanced green fluorescent protein mice osteoblasts. The X-ray photoelectron spectroscopy results reveal that a thin titanium nitride (TiN) layer with higher hardness is formed on the surface after nitrogen PIII. The corrosion resistance of the implanted sample is also superior to that of the untreated NiTi and stainless steel and comparable to that of titanium alloy. The release of nickel ions is significantly reduced compared with the untreated NiTi. The sample with surface TiN exhibits the highest amount of cell proliferation whereas stainless steel fares the worst. Compared with coatings, the plasma-implanted structure does not delaminate as easily and nitrogen PIII is a viable way to improve the properties of NiTi orthopedic implants.

Surface characteristics, biocompatibility, and mechanical properties of nickel-titanium plasma-implanted with nitrogen at different implantation voltages.

NiTi shape memory alloy is one of the promising orthopedic materials due to the unique shape memory effect and superelasticity. However, the large amount of Ni in the alloy may cause allergic reactions and toxic effects thereby limiting its applications. In this work, the surface of NiTi alloy was modified by nitrogen plasma immersion ion implantation (N-PIII) at various voltages. The materials were characterized by X-ray photoelectron spectroscopy (XPS). The topography and roughness before and after N-PIII were measured by atomic force microscope. The effects of the modified surfaces on nickel release and cytotoxicity were assessed by immersion tests and cell cultures. The XPS results reveal that near-surface Ni concentration is significantly reduced by PIII and the surface TiN layer suppresses nickel release and favors osteoblast proliferation, especially for samples implanted at higher voltages. The surfaces produced at higher voltages of 30 and 40 kV show better adhesion ability to osteoblasts compared to the unimplanted and 20 kV PIII samples. The effects of heating during PIII on the phase transformation behavior and cyclic deformation response of the materials were investigated by differential scanning calorimetry and three-point bending tests. Our results show that N-PIII conducted using the proper conditions improves the biocompatibility and mechanical properties of the NiTi alloy significantly.

Characteristics and mechanical properties of acrylolpamidronate-treated strontium containing bioactive bone cement.

The aim of the present study was to determine the influence of surface treatment on the mechanical properties of strontium-containing hydroxyapatite (Sr-HA) bioactive bone cement. Previously we developed an injectable bioactive cement (SrHAC) system composed of Sr-HA powders and bisphenol A diglycidylether dimethacrylate (Bis-GMA). In this study, the Sr-HA powder was subjected to surface treatment using acrylolpamidronate, a bisphosphonate derivative, which has a polymerizable group, to improve the interface between inorganic filler and organic matrix by binding Sr-HA and copolymerizing into the matrix. After surface treatment, the compression strength, bending strength, and stiffness of the resulting composites were defined by using a material testing machine (MTS) according to ISO 5833. The fracture surface of the bone cement specimen was observed with a scanning electron microscope. Invitro cytotoxicity of surface-treated SrHAC was also studied using a tetrazolium-based cell viability assay (MTS/pms) on human osteoblast-like cells, the SaOS-2 cell line. Cells were seeded at a density of 10(4)/mL and allowed to grow in an incubator for 48 h at 37 degrees C. Results indicated that after surface treatment, the compression strength and stiffness significantly improved by 22.68 and 14.51%, respectively. The bending strength and stiffness of the bioactive bone cement also showed 19.06 and 8.91% improvements via three-point bending test. The fracture surface micromorphology after compression and bending revealed that the bonding between the resin to surface-treated filler considerably improved. The cell viability indicated that the treated particles were nontoxic and did not inhibit cell growth. This study demonstrated a new surface chemistry route to enhance the covalent bonds between inorganic fillers and polymer matrix for improving the mechanical properties of bone cement. This method not only improves the overall mechanical performance but also increases osteoblastic activity.

Biocompatibility of electrophoretical deposition of nanostructured hydroxyapatite coating on roughen titanium surface: in vitro evaluation using mesenchymal stem cells.

A nano hydroxyapatite (HAp) layer was coated on a roughen titanium surface by means of electrophoretic deposition with an acetic anhydride solvent system. The objectives of this current study are to investigate whether nano-HAp can improve mechanical strength at a lower sintering temperature and biocompatibility. Densification temperature was lowered from usual 1000 to 800 degrees C. The coating interfacial bonding strength, phase purity, microstructure, and biocompatibility were investigated. Degradation of HA phase was not detected in XRD. A porous TiO2 layer acts as a gradient coating layer with an intermediate thermal expansion coefficient between hydroxyapatite and titanium that reduces the thermal stress. From SEM image, the coating does not contain any crack. Mesenchymal stem cell (MSC) is the progenitor cell for various tissues in mature animals, which can improve integration of bone tissue into implant. In this in vitro study, rabbit MSCs culture indicated that the HAp/Ti nanocomposite biomaterial had good biocompatibility and bioactivity. Around materials and on its surface cell grew well with good morphology. Proliferation of the MSCs on the nano-HAp coating was higher than its micron counterpart in XTT assay. These properties show potential for the orthopaedic and dental applications.

Interfacial behaviour of strontium-containing hydroxyapatite cement with cancellous and cortical bone.

The bone-bonding behaviors of various biomaterials have been extensively investigated. However, the precise mechanisms of bone bonding have not yet been clarified, and the differences in interfacial behaviors of biomaterial bonding with cancellous bone and cortical bone have not yet been understood. In this study, strontium-containing hydroxyapatite (Sr-HA) cement, in which 10% calcium ions were substituted by strontium, was performed in a rabbit hip replacement model. Six months later, the morphology and chemical composition of interfaces between Sr-HA cement with cancellous bone and cortical bone were evaluated by field emission scanning electron microscopy (FESEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Remarkable differences between these two interfaces were suggested both in morphology and chemical compositions. An apatite layer was found between Sr-HA cement and cancellous bone with a thickness of about 70 microm. However, only a very thin interface (about 1 microm) was formed with cortical bone. As for the cancellous bone/cement interface, high ions intensity of Ca, P, Sr, Na, and O were confirmed by FESEM-EDX and ToF-SIMS. Differences in morphology and chemical component between these two interfaces provided convincing evidences for the proposed dissolution-precipitation coupling mechanism in the formation of biological apatite.