ABSTRACT
Optical beam steerers have been widely employed for information acquisitions. Numerous beam steering schemes have been developed, and each of them can satisfy practical requirements for certain scenarios. However, there is still a lack of a comprehensive approach that is able to balance all of the critical technical parameters for wide range of applications. Here, a semisolid micromechanical beam steering system based on micrometa-lens arrays (MMLAs) is demonstrated. It is operated by manipulating the probe beam over two sets of decentered MMLAs potentially driven by high-speed piezo-electric motors. Small f-numbers, well-corrected aberration, and easy lateral reproduction of micrometa-lenses optimize the overall technical parameters. As a proof-of-concept, we implement such a device exhibiting diffraction-limited resolution within a large field of view of 30° × 30°. A three-dimensional depth sensing is also performed to demonstrate its potential in light detection and ranging applications.
Subject(s)
Lenses , Equipment Design , Equipment Failure AnalysisABSTRACT
Magnetic skyrmions are versatile topological excitations that can be used as nonvolatile information carriers. The confinement of skyrmions in channels is fundamental for any application based on the accumulation and transport of skyrmions. Here, we report a method that allows effective position control of skyrmions in designed channels by engineered energy barriers and wells, which is realized in a magnetic multilayer film by harnessing the boundaries of patterns with modified magnetic properties. We experimentally and computationally demonstrate that skyrmions can be attracted or repelled by the boundaries of areas with modified perpendicular magnetic anisotropy and Dzyaloshinskii-Moriya interaction. By fabricating square and stripe patterns with modified magnetic properties, we show the possibility of building reliable channels for confinement, accumulation, and transport of skyrmions, which effectively protect skyrmions from being destroyed at the device edges. Our results are useful for the design of spintronic applications using either static or dynamic skyrmions.
ABSTRACT
Dynamic structural color has attracted considerable attentions due to its good tunable characteristics. Here, an ultrathin asymmetric Fabry-Perot (FP)-type structural color with phase-change material VO2 cavity is proposed. The color-switching performance can be realized by temperature regulation due to the reversible monoclinic-rutile phase transition of VO2. The various, vivid structural color can be generated by simply changing the thickness of VO2 and Ag layers. Moreover, the simple structural configuration enables a large-scale, low-cost preparation on both rigid and flexible substrates. Accordingly, a flexible dynamic structural color membrane is adhered on a cup with a curved surface to be used for temperature perception. The proposed dynamic structural color has potential applications in anti-counterfeiting, temperature perception, camouflage coatings among other flexible optoelectronic devices.
ABSTRACT
It is very important for human health to supervise the use of food additives, because excessive use of food additives will cause harm to the human body, especially lead to organ failures and even cancers. Therefore, it is important to realize high-sensibility detection of benzoic acid, a widely used food additive. Based on the theory of electromagnetism, this research attempts to design a terahertz-enhanced metamaterial resonator, using a metamaterial resonator to achieve enhanced detection of benzoic acid additives by using terahertz technology. The absorption peak of the metamaterial resonator is designed to be 1.95 THz, and the effectiveness of the metamaterial resonator is verified. Firstly, the original THz spectra of benzoic acid aqueous solution samples based on metamaterial are collected. Secondly, smoothing, multivariate scattering correction (MSC), and smoothing combined with first derivative (SG + 1 D) methods are used to preprocess the spectra to study the better spectral pretreatment methods. Then, Uninformative Variable Elimination (UVE) and Competitive Adaptive Reweighted Sampling (CARS) are used to explore the optimal terahertz band selection method. Finally, Partial Least Squares (PLS) and Least square support vector machine (LS-SVM) models are established, respectively, to realize the enhanced detection of benzoic acid additives. The LS-SVM model combined with CARS has the best effect, with the correlation coefficient of prediction set (Rp) is 0.9953, the root mean square error of prediction set (RMSEP) is 7.3 × 10-6, and the limit of detection (LOD) is 2.3610 × 10-5 g/mL. The research results lay a foundation for THz spectral analysis of benzoic acid additives, so that THz technology-based detection of benzoic acid additives in food can reach requirements stipulated in the national standard. This research is of great significance for promoting the detection and analysis of trace additives in food, whose results can also serve as a reference to the detection of antibiotic residues, banned additives, and other trace substances.
Subject(s)
Benzoic Acid , Support Vector Machine , Food , Humans , Least-Squares AnalysisABSTRACT
Subwavelength channels filled with near-zero-index (NZI) media can realize extraordinary optical functionalities, for example, tunneling electromagnetic wave without reflections, but usually confined in a narrow wavelength band due to the material singularity (refractive index n≈0), which seriously limits the practical potentials. In this Letter, we show this limit can be fundamentally overcome by an alternative, named near-zero-index-featured (NZIF) structure, with the singularity transmuted via a controlled optical conformal mapping, enabling the device implementation with nonmagnetic normal dielectrics (i.e., relative permittivity >1). Their equivalence is strictly examined through a subwavelength tunneling waveguide. Classic wave tunneling features in a broad frequency range are revealed in various confined geometries. These properties are robust against the disturbance of several kinds of structural defects benefited from the infinite effective local wavelength. The broadband and lossless NZIF medium proposed here provides a promising way to pursue the fascinating light controlling functionalities as initially enabled by singular NZI materials.
ABSTRACT
Metasurfaces have been widely investigated for various applications enabled by their strong light manipulation capabilities. Their monolithic designs offer the convenience to incorporate novel natural materials in order to realize advanced electromagnetic (EM) functionalities. Here, based on the usage of the phase change material vanadium dioxide (VO2), a switchable metasurface that could work at two different working states is proposed. With insulating VO2, we show that helicity-dependent metasurface could be rigorously designed by adopting two phase variables, i.e., initial phase and Pancharatnam-Berry (P-B) phase, which is verified by showing an asymmetric photonic spin Hall effect (APSHE). When VO2 goes into the metallic phase (e.g., by raising the operating temperature above ~341K), the loss factor of the unit cell will be enhanced, and in this case with the assistance of multi-mode resonances, the metasurface will turn into a perfect broadband circular-polarization-insensitive EM absorber. Based on these, switchable beam splitters and focus-lenses have been designed and discussed in the paper. The method proposed here may pave a new way to pursue active and multifunctional optical devices.
ABSTRACT
Metamaterials (MMs) have received wide attention due to their strong ability to control wave propagation. Here we propose a thin MM that can realize broadband absorption, as well as in-band phase-controlled reflection. It absorbs more than 90% energy of the incident circularly polarized (CP) light between 7.94-9.76 and 10.99-12.26 GHz and, meanwhile, works as a half-wave plate near 10.35 GHz. The schemes based on both natural and artificial magnetic materials have been discussed to produce the anisotropic phase. A reflection beam steering metasurface is proposed using the absorption-selective MM. The metasurface-integrated MM absorber may have important applications in aerospace technologies such as radome.
ABSTRACT
We theoretically demonstrate a giant power enhancement effect for a line current source in a ε-near-zero (ENZ) two-dimensional (2D) shell with proper physical dimensions. Compared with the traditional high-ε dielectric approach, the ENZ scheme has the prominent advantage that the radiation performance is less sensitive to the outer radius of the shell, which is critically important for real applications where micro-nano fabrications are often involved. The enhancing performance is independent on the position of the source inside the ENZ shell and could be substantially strengthened by incorporating more sources, while the quasi-omnidirectional radiation pattern could be managed to have negligible variance, as evidenced by a particular example with an inner radius of the shell equal to 0.156λ0. Compared with the single source case, two identical sources with a phase difference less than 134° will raise the total radiation power more than 4 folds and the maxima will be about 30 when they are in phase. The field analysis shows that this quasi-isotropic radiation enhancement is mainly contributed by the amplification of the isotropic zeroth order mode radiation while the higher orders with anisotropic emission patterns are effectively suppressed by the specifically designed ENZ shell. In the end, a practicable device employing 4H-silicon carbide (4H-SiC) naturally available with ENZ properties in the mid-infrared regime is numerically proposed, which could provide more than 10 times of radiation enhancement through optimizing the permittivity of the inner dielectric cylinder. These results may find very important applications in the design of novel devices for mid-infrared photon sources or detectors.
ABSTRACT
We report a multifunctional metamaterial composite structure that not only provides the broadband radar and thermal infrared bi-stealth function but also possesses an in-band microwave transmission window and high optical transparency. It is composed of four metasurface layers made of indium tin oxide (ITO) films with different surface resistances, which are specifically designed to sequentially control the infrared emission, microwave absorption and transmission. The fabricated sample exhibits a low reflectivity less than 10% in 1.5-9 GHz and a transmission peak of 50% around 3.8 GHz up to the incident angle of 30 degrees. In the infrared atmosphere window, a low thermal emissivity of about 0.52 is achieved. Meanwhile, it keeps good optical transparency by the use of the ITO films. The optically transparent, low-infrared-emissivity, radar-reflectionless and frequency-selective-transmission properties will enable the promising application of communication-compatible multispectral stealth technology.
ABSTRACT
Radiative thermal rectifiers capable of realizing asymmetric heat flux transfer have attracted a lot of research interests recently, mainly focusing on the engineering of the emissivity spectra. In this Letter, we propose a far-field radiative thermal rectifier utilizing the phase change material vanadium dioxide (VO2). The thermal rectifier consists of a metamaterial infrared absorber and a two-layer thin-film structure acting as the active and the passive components, respectively. Numerical optimization has been carried out to control the emissivity spectra of both parts and maximize the overall rectification effect. A large thermal rectification factor of 3.5 is predicted at a temperature bias of ΔT=100 K.
ABSTRACT
We propose an off-axis meta-lens-based optical wavelength demultiplexer. The performance of the device initially proposed with four output channels (1527-1596 nm, channel spacing 23 nm) composed of an optical fiber array is analyzed by both scalar diffraction theory and ray tracing method. The results show that the fiber energy coupling efficiency of the demultiplexer could be larger than 89% and the channel bandwidth is about 9 nm. Influences of the two key parameters, focal length f and off-axis angle α, are also investigated. We find that the minimum spectral linewidth of the channel is inversely proportional to the sine of α and nearly independent of f for a meta-lens with large F-number (F>5), while the effective spectral range is negatively (positively) dependent on α (f). These results are significant in guiding us to build small and compact demultiplexing devices for optical telecommunication.
ABSTRACT
Analogy optical devices (AODs) able to do mathematical computations have recently gained strong research interest for their potential applications as accelerating hardware in traditional electronic computers. The performance of these wavefront-processing devices is primarily decided by the accuracy of the angular spectral engineering. In this Letter, we show that the multilayer technique could be a promising method to flexibly design AODs according to the input wavefront conditions. As examples, various Si-SiO2-based multilayer films are designed that can precisely perform the second-order differentiation for the input wavefronts of different Fourier spectrum widths. The minimum number and thickness uncertainty of sublayers for the device performance are discussed. A technique by rescaling the Fourier spectrum intensity has been proposed in order to further improve the practical feasibility. These results are thought to be instrumental for the development of AODs.
ABSTRACT
Extended from its electromagnetic counterpart, transformation thermodynamics applied to thermal conduction equations can map a virtual geometry into a physical thermal medium, realizing the manipulation of heat flux with almost arbitrarily desired diffusion paths, which provides unprecedented opportunities to create thermal devices unconceivable or deemed impossible before. In this work we employ this technique to design an efficient plate heater that can transiently achieve a large surface of uniform temperature powered by a small thermal source. As opposed to the traditional approach of relying on the deployment of a resistor network, our approach fully takes advantage of an advanced functional material system to guide the heat flux to achieve the desired temperature heating profile. A different set of material parameters for the transformed device has been developed, offering the parametric freedom for practical applications. As a proof of concept, the proposed devices are implemented with engineered thermal materials and show desired heating behaviors consistent with numerical simulations. Unique applications for these devices can be envisioned where stringent temperature uniformity and a compact heat source are both demanded.
ABSTRACT
Invisible cloaks have been widely explored in many different physical systems but usually for a single phenomenon for one device. In this Letter we make an experimental attempt to show a multidisciplinary framework that has the capability to simultaneously respond to two different physical excitations according to predetermined scenarios. As a proof of concept, we implement an electric-thermal bifunctional device that can guide both electric current and heat flux "across" a strong 'scatterer' (air cavity) and restore their original diffusion directions as if nothing exists along the paths, thus rendering dual cloaking effects for objects placed inside the cavity. This bifunctional cloaking performance is also numerically verified for a line-source nonuniform excitation. Our results and the fabrication technique presented here will help broaden the current research scope for multiple disciplines and may pave a way to manipulate multiple flows and create new functional devices, e.g., for on-chip applications.
ABSTRACT
BACKGROUND: The objective of this study was to determine the effects of pentraxin3 (PTX3) on human oxidized low density lipoprotein (oxLDL) uptake and cholesterol efflux from human macrophage foam cells, which may play a critical role in atherogenesis. METHODS: The effects of PTX3 on oxLDL uptake and cholesterol efflux were determined after transfection of human THP-1 macrophages with pSG5hPTX3 or PTX3siRNA plasmids. To evaluate the role of specific signaling pathways, human THP-1 cells were pre-treated with inhibitors of the extracellular signal-regulated protein kinases 1 and 2 (ERK1/2), phosphatidylinositide 3-kinases (PI3-K), and p38 mitogen-activated protein kinase (MAPK) pathways (PD98059, LY294002, and SB203580, respectively), and then exposed to oxLDL for the uptake assay or oxLDL and [(3)H]-cholesterol and apolipoprotein A-I (apoA-I) for the cholesterol efflux assay. RESULTS: PTX3 overexpression not only promoted oxLDL uptake but also significantly reduced cholesterol efflux to apoA-I; it also significantly decreased the expression of peroxisome proliferator-activated receptor-γ (PPARγ), liver X receptor alpha (LXRα) and ATP-binding membrane cassette transporter A-1 (ABCA1), which was increased with PTX3 silencing. Furthermore, PTX3 significantly increased p-ERK1/2 levels in THP-1-derived foam cells, and inhibition of ERK1/2 by PD98059 significantly reduced the oxLDL uptake and promoted the cholesterol efflux induced by PTX3 overexpression. CONCLUSION: Here, we demonstrate that PTX3 affects lipid accumulation in human macrophages, increasing oxLDL uptake and inhibiting cholesterol efflux. That is the underlying possible mechanisms of PTX3 contribution to the progression of atherosclerosis.
Subject(s)
C-Reactive Protein/metabolism , Cholesterol/metabolism , Foam Cells/metabolism , Lipoproteins, LDL/metabolism , Serum Amyloid P-Component/metabolism , ATP Binding Cassette Transporter 1/metabolism , Apolipoprotein A-I/metabolism , Atherosclerosis/metabolism , C-Reactive Protein/genetics , Cell Line, Tumor , Chromones/pharmacology , Flavonoids/pharmacology , Gene Expression , Gene Silencing , Humans , Imidazoles/pharmacology , Liver X Receptors , Mitogen-Activated Protein Kinase 3/metabolism , Morpholines/pharmacology , Orphan Nuclear Receptors/metabolism , PPAR gamma/metabolism , Phosphatidylinositol 3-Kinases/metabolism , Pyridines/pharmacology , Serum Amyloid P-Component/genetics , Signal Transduction , p38 Mitogen-Activated Protein Kinases/metabolismABSTRACT
This study was aimed to screen human papillomavirus (HPV) types associated with esophageal squamous cell carcinoma of Kazakh in Xinjiang using the gene chip technique and study the clinical significance of this application. The DNAs were collected from esophageal squamous cell carcinoma tissues and healthy esophageal mucosa of Kazakh adults in Xinjiang, and amplified firstly using HPV MY09/11 and then using HPV G5+/6+ to screen positive HPV specimens. These positive specimens were further detected by the gene chip technique to screen highly pathogenic HPV types. After determination with nested PCR amplification with HPV MY09/11 and G5+/6+, the infection rate of HPV was 66.67% in the esophageal squamous cell carcinoma group and 12.12% in the healthy control group. By testing the positive HPV specimens from the esophageal squamous cell carcinoma group, the infection rate of HPV16 was 97.72% and the co-infection rate of HPV16 and HPV18 was 2.27%. HPV16 infection may be involved in the development of esophageal squamous cell carcinoma in Xinjiang Hazakh adults.
Subject(s)
Carcinoma, Squamous Cell/genetics , Esophageal Neoplasms/genetics , Oligonucleotide Array Sequence Analysis/methods , Papillomaviridae/genetics , Papillomavirus Infections/genetics , Aged , Asian People , Carcinoma, Squamous Cell/ethnology , Carcinoma, Squamous Cell/virology , Case-Control Studies , China , DNA, Neoplasm/analysis , DNA, Neoplasm/genetics , DNA, Viral/analysis , DNA, Viral/genetics , Esophageal Neoplasms/ethnology , Esophageal Neoplasms/virology , Female , Host-Pathogen Interactions/genetics , Human papillomavirus 16/genetics , Human papillomavirus 18/genetics , Humans , Male , Middle Aged , Molecular Typing/methods , Molecular Typing/statistics & numerical data , Papillomaviridae/classification , Papillomaviridae/physiology , Papillomavirus Infections/ethnology , Papillomavirus Infections/virology , Polymerase Chain ReactionABSTRACT
The involvement of evanescent waves in the near-field regime could greatly enhance spontaneous thermal radiation, offering a unique opportunity to study nanoscale photon-phonon interaction. However, accurately characterizing this subtle phenomenon is very challenging. This paper proposes a transient all-optical method for rapidly characterizing near-field radiative heat transfer (NFRHT) between macroscopic objects, using the first law of thermodynamics. Significantly, a full measurement at a fixed gap distance is completed within tens of seconds. By simplifying the configuration, the transient all-optical method achieves high measurement accuracy and reliable reproducibility. The proposed method can effectively analyze the NFRHT in various material systems, including SiO2, SiC, and Si, which involve different phonon or plasmon polaritons. Experimental observations demonstrate significant super-Planckian radiation, which arises from the near-field coupling of bounded surface modes. Furthermore, the method achieves excellent agreement with theory, with a minimal discrepancy of less than 2.7% across a wide temperature range. This wireless method could accurately characterize the NFRHT for objects with different sizes or optical properties, enabling the exploration of both fundamental interests and practical applications.
ABSTRACT
Heat shuttling phenomenon is characterized by the presence of a non-zero heat flow between two bodies without net thermal bias on average. It was initially predicted in the context of nonlinear heat conduction within atomic lattices coupled to two time-oscillating thermostats. Recent theoretical works revealed an analog of this effect for heat exchanges mediated by thermal photons between two solids having a temperature dependent emissivity. In this paper, we present the experimental proof of this effect using systems made with composite materials based on phase change materials. By periodically modulating the temperature of one of two solids we report that the system akin to heat pumping with a controllable heat flow direction. Additionally, we demonstrate the effectiveness of a simultaneous modulation of two temperatures to control both the strength and direction of heat shuttling by exploiting the phase delay between these temperatures. These results show that this effect is promising for an active thermal management of solid-state technology, to cool down solids, to insulate them from their background or to amplify heat exchanges.
ABSTRACT
In this paper, we report a fabrication of a three-dimensional (3D) carpet cloak that works for any polarization in free space. Two-dimensional (2D) conformal mapping is first employed and the 3D structure is generated by a rotation of the 2D cloak. The structure of the cloak is hole-in-dielectric. The triangular invisible region has a height of 36 mm (one third of the height of the whole device) and a width of 240 mm. The cloaking effect is examined in free space by measuring the scattering parameters. The results show our device has very good cloaking performance in a wide frequency range from 4 to 10 GHz.
ABSTRACT
Invisibility cloaking based on optical transformation involves materials singularity at the branch cut points. Many interesting optical devices, such as the Eaton lens, also require planar media index singularities in their implementation. We show a method to transmute two singularities simultaneously into harmless topological defects formed by anisotropic permittivity and permeability tensors. Numerical simulation is performed to verify the functionality of the transmuted conformal cloak consisting of two kissing Maxwell fish eyes.