SARS-CoV-2 neutralizing antibody structures inform therapeutic strategies.

The coronavirus disease 2019 (COVID-19) pandemic presents an urgent health crisis. Human neutralizing antibodies that target the host ACE2 receptor-binding domain (RBD) of the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) spike protein1-5 show promise therapeutically and are being evaluated clinically6-8. Here, to identify the structural correlates of SARS-CoV-2 neutralization, we solved eight new structures of distinct COVID-19 human neutralizing antibodies5 in complex with the SARS-CoV-2 spike trimer or RBD. Structural comparisons allowed us to classify the antibodies into categories: (1) neutralizing antibodies encoded by the VH3-53 gene segment with short CDRH3 loops that block ACE2 and bind only to 'up' RBDs; (2) ACE2-blocking neutralizing antibodies that bind both up and 'down' RBDs and can contact adjacent RBDs; (3) neutralizing antibodies that bind outside the ACE2 site and recognize both up and down RBDs; and (4) previously described antibodies that do not block ACE2 and bind only to up RBDs9. Class 2 contained four neutralizing antibodies with epitopes that bridged RBDs, including a VH3-53 antibody that used a long CDRH3 with a hydrophobic tip to bridge between adjacent down RBDs, thereby locking the spike into a closed conformation. Epitope and paratope mapping revealed few interactions with host-derived N-glycans and minor contributions of antibody somatic hypermutations to epitope contacts. Affinity measurements and mapping of naturally occurring and in vitro-selected spike mutants in 3D provided insight into the potential for SARS-CoV-2 to escape from antibodies elicited during infection or delivered therapeutically. These classifications and structural analyses provide rules for assigning current and future human RBD-targeting antibodies into classes, evaluating avidity effects and suggesting combinations for clinical use, and provide insight into immune responses against SARS-CoV-2.

Nmd3 is a structural mimic of eIF5A, and activates the cpGTPase Lsg1 during 60S ribosome biogenesis.

During ribosome biogenesis in eukaryotes, nascent subunits are exported to the cytoplasm in a functionally inactive state. 60S subunits are activated through a series of cytoplasmic maturation events. The last known events in the cytoplasm are the release of Tif6 by Efl1 and Sdo1 and the release of the export adapter, Nmd3, by the GTPase Lsg1. Here, we have used cryo-electron microscopy to determine the structure of the 60S subunit bound by Nmd3, Lsg1, and Tif6. We find that a central domain of Nmd3 mimics the translation elongation factor eIF5A, inserting into the E site of the ribosome and pulling the L1 stalk into a closed position. Additional domains occupy the P site and extend toward the sarcin-ricin loop to interact with Tif6. Nmd3 and Lsg1 together embrace helix 69 of the B2a intersubunit bridge, inducing base flipping that we suggest may activate the GTPase activity of Lsg1.

The T-cell leukemia related rpl10-R98S mutant traps the 60S export adapter Nmd3 in the ribosomal P site in yeast.

Mutations in the ribosomal protein Rpl10 (uL16) can be drivers of T-cell acute lymphoblastic leukemia (T-ALL). We previously showed that these T-ALL mutations disrupt late cytoplasmic maturation of the 60S ribosomal subunit, blocking the release of the trans-acting factors Nmd3 and Tif6 in S. cerevisiae. Consequently, these mutant ribosomes do not efficiently pass the cytoplasmic quality control checkpoint and are blocked from engaging in translation. Here, we characterize suppressing mutations of the T-ALL-related rpl10-R98S mutant that bypass this block and show that the molecular defect of rpl10-R98S is a failure to release Nmd3 from the P site. Suppressing mutations were identified in Nmd3 and Tif6 that disrupted interactions between Nmd3 and the ribosome, or between Nmd3 and Tif6. Using an in vitro system with purified components, we found that Nmd3 inhibited Sdo1-stimulated Efl1 activity on mutant rpl10-R98S but not wild-type 60S subunits. Importantly, this inhibition was overcome in vitro by mutations in Nmd3 that suppressed rpl10-R98S in vivo. These results strongly support a model that Nmd3 must be dislodged from the P site to allow Sdo1 activation of Efl1, and define a failure in the removal of Nmd3 as the molecular defect of the T-ALL-associated rpl10-R98S mutation.

Virus Matryoshka: A Bacteriophage Particle-Guided Molecular Assembly Approach to a Monodisperse Model of the Immature Human Immunodeficiency Virus.

Immature human immunodeficiency virus type 1 (HIV-1) is approximately spherical, but is constructed from a hexagonal lattice of the Gag protein. As a hexagonal lattice is necessarily flat, the local symmetry cannot be maintained throughout the structure. This geometrical frustration presumably results in bending stress. In natural particles, the stress is relieved by incorporation of packing defects, but the magnitude of this stress and its significance for the particles is not known. In order to control this stress, we have now assembled the Gag protein on a quasi-spherical template derived from bacteriophage P22. This template is monodisperse in size and electron-transparent, enabling the use of cryo-electron microscopy in structural studies. These templated assemblies are far less polydisperse than any previously described virus-like particles (and, while constructed according to the same lattice as natural particles, contain almost no packing defects). This system gives us the ability to study the relationship between packing defects, curvature and elastic energy, and thermodynamic stability. As Gag is bound to the P22 template by single-stranded DNA, treatment of the particles with DNase enabled us to determine the intrinsic radius of curvature of a Gag lattice, unconstrained by DNA or a template. We found that this intrinsic radius is far larger than that of a virion or P22-templated particle. We conclude that Gag is under elastic strain in a particle; this has important implications for the kinetics of shell growth, the stability of the shell, and the type of defects it will assume as it grows.

The structure of the teleost Immunoglobulin M core provides insights on polymeric antibody evolution, assembly, and function.

Polymeric (p) immunoglobulins (Igs) serve broad functions during vertebrate immune responses. Typically, pIgs contain between two and six Ig monomers, each with two antigen binding fragments and one fragment crystallization (Fc). In addition, many pIgs assemble with a joining-chain (JC); however, the number of monomers and potential to include JC varies with species and heavy chain class. Here, we report the cryo-electron microscopy structure of IgM from a teleost (t) species, which does not encode JC. The structure revealed four tIgM Fcs linked through eight C-terminal tailpieces (Tps), which adopt a single ß-sandwich-like domain (Tp assembly) located between two Fcs. Remarkably, two of eight heavy chains fold uniquely, resulting in a structure distinct from mammalian IgM, which typically contains five IgM monomers, one JC and a centrally-located Tp assembly. Together with mutational analysis, structural data indicate that pIgs have evolved a range of assembly mechanisms and structures, each likely to support unique antibody effector functions.

The structure of the teleost Immunoglobulin M core provides insights on polymeric antibody evolution, assembly, and function.

Polymeric (p) immunoglobulins (Igs) serve broad functions during vertebrate immune responses. Typically, pIgs contain between two and six Ig monomers, each with two antigen binding fragments and one fragment crystallization (Fc). In addition, many pIgs assemble with a joining-chain (JC); however, the number of monomers and potential to include JC vary with species and heavy chain class. Here, we report the cryo-electron microscopy structure of IgM from a teleost (t) species, which does not encode JC. The structure reveals four tIgM Fcs linked through eight C-terminal tailpieces (Tps), which adopt a single ß-sandwich-like domain (Tp assembly) located between two Fcs. Specifically, two of eight heavy chains fold uniquely, resulting in a structure distinct from mammalian IgM, which typically contains five IgM monomers, one JC and a centrally-located Tp assembly. Together with mutational analysis, structural data indicate that pIgs have evolved a range of assembly mechanisms and structures, each likely to support unique antibody effector functions.

Functionalization of magnetic nanoparticles with amphiphilic block copolymers: self-assembled thermoresponsive submicrometer particles.

For the first time the four block copolymers derived from 1-alkyl[2-(acryloyloxy)ethyl]dimethylammonium bromides with hexyl (ADA) or cetyl (ADHA) groups and 2-hydroxyethylacrylate (HEA) or N-isopropylacrylamide (NIPAM) were synthesized and employed for functionalization of monodisperse iron oxide nanoparticles (NPs). The polyADA (pADA) or polyADHA (pADHA) block consists of long hydrophobic tails (C(6) or C(16)) connected to a positively charged quaternary ammonium group, making this block amphiphilic. The second block was either fully hydrophilic (pHEA) or thermoresponsive (pNIPAM). The dependence of the NP coating on the length of the hydrophobic tail in the amphiphilic block, the composition of the hydrophilic block, and the NP sizes have been studied. Unusual self-assembling of iron oxide NPs into well-defined composite submicrometer particles was observed for pADHA-b-pNIPAM in the wide range of concentrations (at the pADHA repeating unit concentrations of 0.065 × 10(-2)-2.91 × 10(-2) mmol/mL per 1 mg/mL NPs) but only two concentrations, 1.62 × 10(-2) and 1.94 × 10(-2) mmol/mL, led to regular spherical particles. The thermoresponsive behavior of these composite particles was tested using ζ-potential and dynamic light scattering measurements, while the morphology of particles was characterized by transmission electron microscopy. Coating of NPs with pADHA-b-pHEA results in the formation of individually coated NPs. The different composite particle morphologies are explained by different properties of pHEA and pNIPAM. It is demonstrated that the composite particles based on pADHA-b-pNIPAM are responsive to a magnetic field and can be recommended as magnetic stoppers in biorelated membrane separations. The incorporation of Pd species in submicrometer particles makes them promising candidates for catalytic applications as magnetically recoverable catalysts with a high magnetic response.

Computational identification of a systemic antibiotic for gram-negative bacteria.

Discovery of antibiotics acting against Gram-negative species is uniquely challenging due to their restrictive penetration barrier. BamA, which inserts proteins into the outer membrane, is an attractive target due to its surface location. Darobactins produced by Photorhabdus, a nematode gut microbiome symbiont, target BamA. We reasoned that a computational search for genes only distantly related to the darobactin operon may lead to novel compounds. Following this clue, we identified dynobactin A, a novel peptide antibiotic from Photorhabdus australis containing two unlinked rings. Dynobactin is structurally unrelated to darobactins, but also targets BamA. Based on a BamA-dynobactin co-crystal structure and a BAM-complex-dynobactin cryo-EM structure, we show that dynobactin binds to the BamA lateral gate, uniquely protruding into its ß-barrel lumen. Dynobactin showed efficacy in a mouse systemic Escherichia coli infection. This study demonstrates the utility of computational approaches to antibiotic discovery and suggests that dynobactin is a promising lead for drug development.

Nanoparticles by decomposition of long chain iron carboxylates: from spheres to stars and cubes.

In this paper, we report the influence of reaction conditions and the chain length on the nanoparticle (NP) size and morphology for thermal decomposition of long-chain iron carboxylates such as Fe(III) oleate, palmitate, and myristate. In the majority of cases, spherical NPs are obtained; however, nonspherical morphologies were observed in some "extreme" conditions. For example, iron oxide nanostars are formed in eicosane at the Fe oleate/oleic acid ratio of 0.49 g/mL: the highest oleic acid content when NPs still form. The cubic NPs with flat facets are obtained by decomposition of iron palmitate at the lowest palmitic acid fractions, but the most monodisperse cubes are formed at the Fe palmitate/palmitic acid ratio of 1.19 g/mL. Elliptical NPs are formed from Fe myristate with the most well-defined structure. Easy transformation of these NPs from wüstite to maghemite without aggregation and loss of solubility makes them excellent candidates for biomedical applications after proper functionalization described in our preceding papers.

Virus Mechanics under Molecular Crowding.

Viruses avoid exposure of the viral genome to harmful agents with the help of a protective protein shell known as the capsid. A secondary effect of this protective barrier is that macromolecules that may be in high concentration on the outside cannot freely diffuse across it. Therefore, inside the cell and possibly even outside, the intact virus is generally under a state of osmotic stress. Viruses deal with this type of stress in various ways. In some cases, they might harness it for infection. However, the magnitude and influence of osmotic stress on virus physical properties remains virtually unexplored for single-stranded RNA viruses-the most abundant class of viruses. Here, we report on how a model system for the positive-sense RNA icosahedral viruses, brome mosaic virus (BMV), responds to osmotic pressure. Specifically, we study the mechanical properties and structural stability of BMV under controlled molecular crowding conditions. We show that BMV is mechanically reinforced under a small external osmotic pressure but starts to yield after a threshold pressure is reached. We explain this mechanochemical behavior as an effect of the molecular crowding on the entropy of the "breathing" fluctuation modes of the virus shell. The experimental results are consistent with the viral RNA imposing a small negative internal osmotic pressure that prestresses the capsid. Our findings add a new line of inquiry to be considered when addressing the mechanisms of viral disassembly inside the crowded environment of the cell.

Microcrystal Electron Diffraction Elucidates Water-Specific Polymorphism-Induced Emission Enhancement of Bis-arylacylhydrazone.

Aggregation-induced emission (AIE) phenomena have gained intense interest over the last decades because of its importance in solid-state emission. However, the elucidation of a working mechanism is difficult owing to the limited characterization methods on solid-state molecules, further complicated if dynamic structural changes occur. Here, a series of bis-arylacylhydrazones (BAHs) were synthesized, for which their AIE properties are only turned on by the reversible adsorption of water molecules. We used microcrystal electron diffraction (MicroED) to determine the molecular structures of two BAHs directly from bulk powders (without attempting to grow crystals) prepared in the absence or presence of water adsorption. This study reveals the unambiguous characterization of the dependence of crystal packing on the specific cocrystallization with hydrates. The structural analysis demonstrates that water molecules form strong hydrogen bonds with three neighboring BAH-1, resulting in the almost complete planarization and restriction of the intramolecular rotation of the molecule. MicroED plays an important role in providing a decisive clue for the reversible polymorphism changes induced by the adsorption of water molecules, regulating emissive properties.

The structures of secretory and dimeric immunoglobulin A.

Secretory (S) Immunoglobulin (Ig) A is the predominant mucosal antibody, which binds pathogens and commensal microbes. SIgA is a polymeric antibody, typically containing two copies of IgA that assemble with one joining-chain (JC) to form dimeric (d) IgA that is bound by the polymeric Ig-receptor ectodomain, called secretory component (SC). Here, we report the cryo-electron microscopy structures of murine SIgA and dIgA. Structures reveal two IgAs conjoined through four heavy-chain tailpieces and the JC that together form a ß-sandwich-like fold. The two IgAs are bent and tilted with respect to each other, forming distinct concave and convex surfaces. In SIgA, SC is bound to one face, asymmetrically contacting both IgAs and JC. The bent and tilted arrangement of complex components limits the possible positions of both sets of antigen-binding fragments (Fabs) and preserves steric accessibility to receptor-binding sites, likely influencing antigen binding and effector functions.

Structural classification of neutralizing antibodies against the SARS-CoV-2 spike receptor-binding domain suggests vaccine and therapeutic strategies.

The COVID-19 pandemic presents an urgent health crisis. Human neutralizing antibodies (hNAbs) that target the host ACE2 receptor-binding domain (RBD) of the SARS-CoV-2 spike1-5 show therapeutic promise and are being evaluated clincally6-8. To determine structural correlates of SARS-CoV-2 neutralization, we solved 8 new structures of distinct COVID-19 hNAbs5 in complex with SARS-CoV-2 spike trimer or RBD. Structural comparisons allowed classification into categories: (1) VH3-53 hNAbs with short CDRH3s that block ACE2 and bind only to "up" RBDs, (2) ACE2-blocking hNAbs that bind both "up" and "down" RBDs and can contact adjacent RBDs, (3) hNAbs that bind outside the ACE2 site and recognize "up" and "down" RBDs, and (4) Previously-described antibodies that do not block ACE2 and bind only "up" RBDs9. Class 2 comprised four hNAbs whose epitopes bridged RBDs, including a VH3-53 hNAb that used a long CDRH3 with a hydrophobic tip to bridge between adjacent "down" RBDs, thereby locking spike into a closed conformation. Epitope/paratope mapping revealed few interactions with host-derived N-glycans and minor contributions of antibody somatic hypermutations to epitope contacts. Affinity measurements and mapping of naturally-occurring and in vitro-selected spike mutants in 3D provided insight into the potential for SARS-CoV-2 escape from antibodies elicited during infection or delivered therapeutically. These classifications and structural analyses provide rules for assigning current and future human RBD-targeting antibodies into classes, evaluating avidity effects, suggesting combinations for clinical use, and providing insight into immune responses against SARS-CoV-2.

Characterization of Reactive Organometallic Species via MicroED.

Here we apply microcrystal electron diffraction (MicroED) to the structural determination of transition-metal complexes. We find that the simultaneous use of 300 keV electrons, very low electron doses, and an ultrasensitive camera allows for the collection of data without cryogenic cooling of the stage. This technique reveals the first crystal structures of the classic zirconocene hydride, colloquially known as "Schwartz's reagent", a novel Pd(II) complex not amenable to solution-state NMR or X-ray crystallography, and five other paramagnetic and diamagnetic transition-metal complexes.

Coat Protein-Dependent Behavior of Poly(ethylene glycol) Tails in Iron Oxide Core Virus-like Nanoparticles.

Here we explore the formation of virus-like nanoparticles (VNPs) utilizing 22-24 nm iron oxide nanoparticles (NPs) as cores and proteins derived from viral capsids of brome mosaic virus (BMV) or hepatitis B virus (HBV) as shells. To accomplish that, hydrophobic FeO/Fe3O4 NPs prepared by thermal decomposition of iron oleate were coated with poly(maleic acid-alt-octadecene) modified with poly(ethylene glycol) (PEG) tails of different lengths and grafting densities. MRI studies show high r2/r1 relaxivity ratios of these NPs that are practically independent of the polymer coating type. The versatility and flexibility of the viral capsid protein are on display as they readily form shells that exceed their native size. The location of the long PEG tails upon shell formation was investigated by electron microscopy and small-angle X-ray scattering. PEG tails were located differently in the BMV and HBV VNPs, with the BMV VNPs preferentially entrapping the tails in the interior and the HBV VNPs allowing the tails to extend through the capsid, which highlights the differences between intersubunit interactions in these two icosahedral viruses. The robustness of the assembly reaction and the protruding PEG tails, potentially useful in modulating the immune response, make the systems introduced here a promising platform for biomedical applications.

Budding pathway in the templated assembly of viruslike particles.

A new pathway for the assembly of viral capsid protein around inorganic nanoparticle cores was observed by time-course light scattering and cryo-electron tomography. Gold nanoparticles with an average diameter of 11.3 nm have been used as a template for the assembly of Brome mosaic virus (BMV) capsid protein at different concentrations. At least at low protein concentrations the kinetic features of the scattering and extinction measurements are consistent with the initial rapid formation of large nanoparticle-protein clusters, which subsequently separate into individual viruslike particles (VLPs). The occurrence of multiparticle clusters at short times after mixing nanoparticles and proteins was confirmed by cryo-EM. Cryo-electron tomography of the multiparticle clusters yielded an average surface-to-surface interparticle distance of ∼7.5 nm, equivalent to ∼1.5 times the thickness of a protein shell. We propose a scenario in which VLP generation may take place through monomer exchange between aggregated particles with defect-ridden or incomplete shells, leading to the formation of stable icosahedral shells, which eventually bud off the aggregate. Together with results from previous works, the findings highlight the astonishing versatility of plant virus capsid protein assembly. This previously unknown mechanism for VLP formation has features that may have relevance for the crowded environment characterizing virus factories in the cell.

γ-Fe2O3 nanoparticle surface controls PtFe nanoparticle growth and catalytic properties.

We report a novel method for synthesis of alloy PtFe nanoparticles (NPs) of different compositions using γ-Fe2O3 NPs as an iron source. We show here other growth mechanisms than conventional nucleation on a NP surface leading to core-shell NP or seeded NP growth. Depending on reaction conditions, different compositions of PtFe NPs can be obtained. PtFe NPs may coexist with γ-Fe2O3 NPs in the reaction product. This mixture obtained in situ allows much higher catalytic activity in hydrogenation of methyl-3-buten-2-ol than that of only PtFe nanoparticles or merely mixed PtFe and γ-Fe2O3 NPs. The presence of both PtFe and γ-Fe2O3 NPs allows formation of dense and stable NP arrays which hold promise for catalytic applications in microreactors or other reactor designs where a catalytic film is favoured.

Magnetic virus-like nanoparticles in N. benthamiana plants: a new paradigm for environmental and agronomic biotechnological research.

This article demonstrates the encapsulation of cubic iron oxide nanoparticles (NPs) by Brome mosaic virus capsid shells and the formation, for the first time, of virus-based nanoparticles (VNPs) with cubic cores. Cubic iron oxide NPs functionalized with phospholipids containing poly(ethylene glycol) tails and terminal carboxyl groups exhibited exceptional relaxivity in magnetic resonance imaging experiments, which opens the way for in vivo MRI studies of systemic virus movement in plants. Preliminary data on cell-to-cell and long-distance transit behavior of cubic iron oxide NPs and VNPs in Nicotiana benthamiana leaves indicate that VNPs have specific transit properties, i.e., penetration into tissue and long-distance transfer through the vasculature in N. benthamiana plants, even at low temperature (6 °C), while NPs devoid of virus protein coats exhibit limited transport by comparison. These particles potentially open new opportunities for high-contrast functional imaging in plants and for the delivery of therapeutic antimicrobial cores into plants.

Hydrophilization of Magnetic Nanoparticles with Modified Alternating Copolymers. Part 2: Behavior in solution.

Aqueous solutions of iron oxide nanoparticles (NPs) stabilized by poly(maleic acid-alt-1-octadecene) (PMAcOD) modified with the 5,000 Da poly(ethylene glycol) (PEG) or the short ethylene glycol (EG) tails were analyzed by small-angle X-ray scattering (SAXS). Advanced SAXS data analysis methods were employed to systematically characterize the structure and interactions between the NPs. Depending on the type of the grafted tail and the grafting density all NPs can be separated into three groups. All the samples contain mixtures of individual nanoparticles, their dynamic clusters and aggregates, and the fractions of these species are different in the different groups. The first group consists of NPs coated with PMAcOD modified with the long PEG tails with the maximal grafting density, and the content of dynamic clusters and aggregates in the samples of this group does not exceed 4%. The samples from the second group with less dense coatings demonstrate a larger amount (5-7%) of the aggregates and dynamic clusters. The samples from the third group consisting of the NPs protected by EG modified PMAcOD contain mostly individual NPs and some amount of dumbbell dimers without noticeable aggregation. Importantly, the solution behavior of the NPs is independent on the iron oxide core size. Our results therefore provide means of predicting stabilization and avoiding aggregation of NPs based on the type of a protective shell.