Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 11 de 11
Filter
1.
Knee Surg Sports Traumatol Arthrosc ; 29(9): 3105-3114, 2021 Sep.
Article in English | MEDLINE | ID: mdl-33216188

ABSTRACT

PURPOSE: To compare the long-term clinical outcomes of single-bundle anterior cruciate ligament reconstruction (SBR) and double-bundle anterior cruciate ligament reconstruction (DBR) in patients with isolated anterior cruciate ligament (ACL) rupture, presenting no meniscus injury and no obvious preoperative cartilage degeneration. METHODS: One hundred and three patients (38.6 ± 9.5 years) with a median follow-up of 151.6 months (range, 144-189 months) completed the retrospective study (SBR group: n = 51; DBR group: n = 52). Clinical outcomes were evaluated with physical examinations, KT-2000 anterior and posterior stability measurement with the knee in 30º of flexion, International Knee Documentation Committee (IKDC) subjective score, Tegner score, Lysholm score; magnetic resonance imaging (MRI) (3.0 T) was performed, and International Cartilage Repair Society (ICRS) cartilage degeneration grades were determined. Multivariate analysis was performed to identify factors associated with cartilage degeneration. RESULTS: There were significant differences in the pre- and postoperative IKDC, Lysholm and Tegner scores between the SBR and DBR groups. The SBR group had over double the rate of positive pressure/rub patellar test results (SBR vs DBR, 43.1% vs. 19.2%, p < 0.011). The KT-2000, pivot-shift and Lachman test results were stratified and analyzed, and significant differences between the SBR and DBR groups were found (p < 0.05, respectively). The distribution of ICRS grades differed significantly between the groups at the last follow-up (p = 0.013). A multivariate analysis found that age and operation procedures were significant predictors of 0 and non-0 ICRS grades (odds ratio, 6.077 [95% CI 2.117-17.447] and 0.210 [95% CI 0.068-0.654], respectively) (p < 0.05). CONCLUSION: Both SBR and DBR achieved overall good long-term results. DBR had advantages in objective outcome measures and was superior in preventing the occurrence of cartilage degeneration. Age was identified as a preoperative risk factor for significant postoperative cartilage degeneration. LEVEL OF EVIDENCE: III. ClinicalTrials.gov: NCT03984474.


Subject(s)
Anterior Cruciate Ligament Injuries , Anterior Cruciate Ligament Reconstruction , Anterior Cruciate Ligament Injuries/surgery , Follow-Up Studies , Humans , Knee Joint/surgery , Retrospective Studies , Treatment Outcome
2.
ANZ J Surg ; 93(4): 980-988, 2023 04.
Article in English | MEDLINE | ID: mdl-36757833

ABSTRACT

BACKGROUND: The infrequency of lateral unicompartmental knee arthroplasty (UKA) has led to a lack of understanding of its survival. This study aimed to systematically evaluate the survivorship results of lateral UKA at different follow-ups based on available literature. METHODS: Five databases were searched for eligible studies. Pooled survivorships with 95% confidence intervals (CIs) at 3, 5, 10, 15, and 20 years after lateral UKA were estimated using a random-effect model. Subgroup and sensitivity analyses were performed. RESULTS: A total of 26 studies involving 5470 lateral UKAs were included. Survivorships of lateral UKA at 3-, 5-, 10-, 15-, and 20-year follow-ups were 96% (95% CI: 95-98%, I2 : 77.5%), 94% (95% CI: 93-96%, I2 : 70.8%), 88% (95% CI: 84-91%, I2 : 70.8%), 85% (95% CI: 79-91%, I2 : 70.8%), and 78% (95% CI: 71-85%, I2 : 54.2%), respectively. Subgroup analyses found that bearing type, the number of surgeons, and year of publication might be associated with implant survival outcomes. CONCLUSION: Lateral UKA is an effective procedure with excellent survivorships at short-, mid-, and long-term follow-ups. Results suggest a single-surgeon lateral UKA using fixed-bearing. Additional well-designed studies are needed to elucidate the current findings.


Subject(s)
Arthroplasty, Replacement, Knee , Humans , Arthroplasty, Replacement, Knee/methods , Knee Joint/surgery , Knee Prosthesis , Osteoarthritis, Knee/surgery , Prosthesis Design , Reoperation , Retrospective Studies , Treatment Outcome
3.
ANZ J Surg ; 93(7-8): 1907-1916, 2023.
Article in English | MEDLINE | ID: mdl-37043691

ABSTRACT

BACKGROUND: To systematically investigate if aspirin (ASA), used as venous thromboembolism (VTE) prophylaxis, plays a role in the prevention of heterotopic ossification (HO) following total hip arthroplasty (THA) and if ASA dosage impacted the rate of HO. METHODS: Eligible studies published from January 2000 to July 2022 were identified from the computerized searching of PubMed, Scopus and Web of Science. HO was defined according to Brooker Classification. Pooled risk ratios (OR) and 95% confidence interval (CI) were estimated under a random-effect model. Additionally, combined HO incidences were compared according to ASA dosage (a regular dose of 325 bid vs. a low dose of 81 mg bid/162 mg qd). RESULTS: Thirteen studies were included. ASA administered for VTE prophylaxis was significantly associated with a reduced risk of all-grade HO following THA (univariate, OR: 0.50, 95% CI: 0.34-0.74, P < 0.001; multivariate, OR: 0.60, 95% CI: 0.49-0.73, P < 0.001). Similar results could be observed for high-grade HO (univariate, OR: 0.57, 95% CI: 0.36-0.89, P = 0.015; multivariate, OR: 0.50, 95% CI: 0.27-0.92, P = 0.026). There was a non-significant trend towards a higher incidence of HO formation for low-dose ASA (31%, 95% CI: 29-34%), compared with regular-dose ASA (21%, 95% CI: 11-33%) (P = 0.069 under test of interaction). CONCLUSIONS: ASA can be an effective option for HO prophylaxis. More well-designed trials with long-term follow-ups are encouraged to confirm the current findings and to investigate the effect of ASA dosage on HO reduction.


Subject(s)
Arthroplasty, Replacement, Hip , Ossification, Heterotopic , Venous Thromboembolism , Humans , Aspirin/therapeutic use , Arthroplasty, Replacement, Hip/adverse effects , Venous Thromboembolism/etiology , Venous Thromboembolism/prevention & control , Ossification, Heterotopic/etiology , Ossification, Heterotopic/prevention & control , Incidence
4.
Front Bioeng Biotechnol ; 11: 1164922, 2023.
Article in English | MEDLINE | ID: mdl-37425368

ABSTRACT

The biomechanical changes following meniscal tears and surgery could lead to or accelerate the occurrence of osteoarthritis. The aim of this study was to investigate the biomechanical effects of horizontal meniscal tears and different resection strategies on a rabbit knee joint by finite element analysis and to provide reference for animal experiments and clinical research. Magnetic resonance images of a male rabbit knee joint were used to establish a finite element model with intact menisci under resting state. A medial meniscal horizontal tear was set involving 2/3 width of a meniscus. Seven models were finally established, including intact medial meniscus (IMM), horizontal tear of the medial meniscus (HTMM), superior leaf partial meniscectomy (SLPM), inferior leaf partial meniscectomy (ILPM), double-leaf partial meniscectomy (DLPM), subtotal meniscectomy (STM), and total meniscectomy (TTM). The axial load transmitted from femoral cartilage to menisci and tibial cartilage, the maximum von Mises stress and the maximum contact pressure on the menisci and cartilages, the contact area between cartilage to menisci and cartilage to cartilage, and absolute value of the meniscal displacement were analyzed and evaluated. The results showed that the HTMM had little effect on the medial tibial cartilage. After the HTMM, the axial load, maximum von Mises stress and maximum contact pressure on the medial tibial cartilage increased 1.6%, 1.2%, and 1.4%, compared with the IMM. Among different meniscectomy strategies, the axial load and the maximum von Mises stress on the medial menisci varied greatly. After the HTMM, SLPM, ILPM, DLPM, and STM, the axial load on medial menisci decreased 11.4%, 42.2%, 35.4% 48.7%, and 97.0%, respectively; the maximum von Mises stress on medial menisci increased 53.9%, 62.6%, 156.5%, and 65.5%, respectively, and the STM decreased 57.8%, compared to IMM. The radial displacement of the middle body of the medial meniscal was larger than any other part in all the models. The HTMM led to few biomechanical changes in the rabbit knee joint. The SLPM showed minimal effect on joint stress among all resection strategies. It is recommended to preserve the posterior root and the remaining peripheral edge of the meniscus during surgery for an HTMM.

5.
Orthop Surg ; 14(12): 3367-3377, 2022 Dec.
Article in English | MEDLINE | ID: mdl-36222205

ABSTRACT

OBJECTIVE: The debate on the superiority of single- or double-bundle for anterior cruciate ligament reconstruction has not ceased. The comparative studies on intra-articular biomechanics after different surgical reconstructions are rare. This study is to evaluate the biomechanical stress distribution intra-knee after single- and double-bundle anterior cruciate ligament reconstruction by three-dimensional finite element analysis, and to observe the change of stress concentration under the condition of vertical gradient loads. METHODS: In this study, magnetic resonance imaging data were extracted from patients and healthy controls for biomechanical analysis. Patients included in the three models were matched in age and sex. The strength and distribution of induced stresses were analyzed in two frequently used procedures, anatomical single-bundle anterior cruciate ligament reconstruction and anatomical double-bundle anterior cruciate ligament reconstruction, using femoral-graft-tibial system under different loads, to mimic a post-operation mechanical motion. The three-dimensional finite-element models for normal ligament and two surgical methods were applied. A vertical force simulating daily walking was performed on the models to assess the interfacial stresses and displacements of intra-articular tissues and ligaments. The evaluation results mainly included the stress of each part of ligament and meniscus. The stress values of different parts of three models were extracted and compared. RESULTS: The stress of ligament/graft at femoral side of three finite-element models was significantly higher than at tibial side, while the highest level was observed in single-bundle reconstruction finite-element model. With the increase of force, the maximum stress in the medial (7.1-7.1 MPa) and lateral (4.9-7.4 MPa) meniscus of single-bundle reconstruction finite-element model shifted from the anterior horn to the central area (p = 0.0161, 0.0479, respectively). The stress was shown to be at a lower level at femoral side and posterior cruciate ligament of intra-knee in two reconstruction finite-element models than that in normal finite-element models, while presented higher level at the tibial side than normal knee (p = 0.3528). The displacement of the femoral side and intra-knee areas in reconstruction finite-element models was greater than that in normal finite-element model (p = 0.0855). CONCLUSION: Compared with the single-bundle technique, the graft of double-bundle anterior cruciate ligament reconstruction has better stress dissipation effect and can prevent postoperative meniscus tear more effectively.


Subject(s)
Anterior Cruciate Ligament Reconstruction , Humans , Finite Element Analysis , Gait , Ligaments
6.
Polymers (Basel) ; 13(13)2021 Jun 29.
Article in English | MEDLINE | ID: mdl-34209853

ABSTRACT

The limited self-healing ability of cartilage necessitates the application of alternative tissue engineering strategies for repairing the damaged tissue and restoring its normal function. Compared to conventional tissue engineering strategies, three-dimensional (3D) printing offers a greater potential for developing tissue-engineered scaffolds. Herein, we prepared a novel photocrosslinked printable cartilage ink comprising of polyethylene glycol diacrylate (PEGDA), gelatin methacryloyl (GelMA), and chondroitin sulfate methacrylate (CSMA). The PEGDA-GelMA-CSMA scaffolds possessed favorable compressive elastic modulus and degradation rate. In vitro experiments showed good adhesion, proliferation, and F-actin and chondrogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) on the scaffolds. When the CSMA concentration was increased, the compressive elastic modulus, GAG production, and expression of F-actin and cartilage-specific genes (COL2, ACAN, SOX9, PRG4) were significantly improved while the osteogenic marker genes of COL1 and ALP were decreased. The findings of the study indicate that the 3D-printed PEGDA-GelMA-CSMA scaffolds possessed not only adequate mechanical strength but also maintained a suitable 3D microenvironment for differentiation, proliferation, and extracellular matrix production of BMSCs, which suggested this customizable 3D-printed PEGDA-GelMA-CSMA scaffold may have great potential for cartilage repair and regeneration in vivo.

7.
Front Bioeng Biotechnol ; 9: 621483, 2021.
Article in English | MEDLINE | ID: mdl-33791283

ABSTRACT

Background: Tendon-bone healing is an important factor in determining the success of ligament reconstruction. With the development of biomaterials science, the tissue engineering scaffold plays an extremely important role in tendon-bone healing and bone tissue engineering. Materials and Methods: Electronic databases (PubMed, Embase, and the Web of Science) were systematically searched for relevant and qualitative studies published from 1 January 1990 to 31 December 2019. Only original articles that met eligibility criteria and evaluated the use of issue engineering scaffold especially biomaterials in tendon bone healing in vivo were selected for analysis. Results: The search strategy identified 506 articles, and 27 studies were included for full review including two human trials and 25 animal studies. Fifteen studies only used biomaterials like PLGA, collage, PCL, PLA, and PET as scaffolds to repair the tendon-bone defect, on this basis, the rest of the 11 studies using biological interventions like cells or cell factors to enhance the healing. The adverse events hardly ever occurred, and the tendon bone healing with tissue engineering scaffold was effective and superior, which could be enhanced by biological interventions. Conclusion: Although a number of tissue engineering scaffolds have been developed and applied in tendon bone healing, the researches are mainly focused on animal models which are with limitations in clinical application. Since the efficacy and safety of tissue engineering scaffold has been proved, and can be enhanced by biological interventions, substantial clinical trials remain to be done, continued progress in overcoming current tissue engineering challenges should allow for successful clinical practice.

8.
Biomed Res Int ; 2021: 6699910, 2021.
Article in English | MEDLINE | ID: mdl-33937412

ABSTRACT

Cartilage injury of the knee joint is very common. Due to the limited self-healing ability of articular cartilage, osteoarthritis is very likely to occur if left untreated. Bone marrow mesenchymal stem cells (BMMSCs) are widely used in the study of cartilage injury due to their low immunity and good amplification ability, but they still have disadvantages, such as heterogeneous undifferentiated cells. MicroRNAs can regulate the chondrogenic differentiation ability of MSCs by inhibiting or promoting mRNA translation and degradation. In this research, we primarily investigated the effect of microRNA-210-3p (miR-210-3p) on chondrogenic and adipogenic differentiation of BMMSCs in vitro. Our results demonstrate that miR-210-3p promoted chondrogenic differentiation and inhibited adipogenic differentiation of rat BMMSCs, which was related to the HIF-3α signalling pathway. Additionally, miR-210-3p promotes mRNA and protein levels of the chondrogenic expression genes COLII and SOX9 and inhibits mRNA and protein levels of the adipogenic expression genes PPARγ and LPL. Thus, miR-210-3p combined with BMMSCs is a candidate for future clinical applications in cartilage regeneration and could represent a promising new therapeutic target for OA.


Subject(s)
Adipogenesis/genetics , Chondrogenesis/genetics , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/metabolism , MicroRNAs/metabolism , Signal Transduction , Transcription Factors/metabolism , Animals , Base Sequence , Binding Sites , Male , MicroRNAs/genetics , Models, Biological , RNA, Messenger/genetics , RNA, Messenger/metabolism , Rats, Sprague-Dawley , Transcription Factors/genetics
9.
Front Pharmacol ; 11: 471, 2020.
Article in English | MEDLINE | ID: mdl-32431606

ABSTRACT

Poly(ε-caprolactone) (PCL) derived scaffolds have been extensively explored in the field of tissue-engineered meniscus (TEM) originating from their good biosafety and biomechanical properties. However, the poor intrinsic hydrophobicity severely hindered their wide applications for the scaffold-assisted tissue regeneration. Herein, we developed a simple strategy on surface modification of three-dimensional (3D) PCL scaffolds via a simply soaking treatment of sodium hydroxide (NaOH) solutions to increase the hydrophilicity and roughness of scaffolds' surfaces. We investigated the effect of hydrolysis degree mediated by NaOH solutions on mechanical properties of 3D scaffolds, considering the importance of scaffolds' resistance to internal force. We also investigated and analyzed the biological performances of mesenchymal stromal cells (MSCs) and meniscal fibrocartilage cells (MFCs) onto the scaffolds treated or untreated by NaOH solutions. The results indicated that hydrophilic modification could improve the proliferation and attachment of cells on the scaffolds. After careful screening process condition, structural fabrication, and performance optimization, these modified PCL scaffolds possessed roughened surfaces with inherent hierarchical pores, enhanced hydrophilicity and preferable biological performances, thus exhibiting the favorable advantages on the proliferation and adhesion of seeded cells for TEM. Therefore, this feasible hydrophilic modification method is not only beneficial to promote smarter biomedical scaffold materials but also show great application prospect in tissue engineering meniscus with tunable architectures and desired functionalities.

10.
Front Pharmacol ; 11: 404, 2020.
Article in English | MEDLINE | ID: mdl-32308625

ABSTRACT

BACKGROUND: Peripheral blood (PB) is a potential source of chondrogenic progenitor cells that can be used for cartilage repair and regeneration. However, the cell types, isolation and implantation methods, seeding dosage, ultimate therapeutic effect, and in vivo safety remain unclear. METHODS: PubMed, Embase, and the Web of Science databases were systematically searched for relevant reports published from January 1990 to December 2019. Original articles that used PB as a source of stem cells to repair cartilage in vivo were selected for analysis. RESULTS: A total of 18 studies were included. Eight human studies used autologous nonculture-expanded PB-derived stem cells (PBSCs) as seed cells with the blood cell separation isolation method, and 10 animal studies used autologous, allogenic or xenogeneic culture-expanded PB-derived mesenchymal stem cells (PB-MSCs), or nonculture-expanded PBSCs as seed cells. Four human and three animal studies surgically implanted cells, while the remaining studies implanted cells by single or repeated intra-articular injections. 121 of 130 patients (in 8 human clinical studies), and 230 of 278 animals (in 6 veterinary clinical studies) using PBSCs for cartilage repair achieved significant clinical improvement. All reviewed articles indicated that using PB as a source of seed cells enhances cartilage repair in vivo without serious adverse events. CONCLUSION: Autologous nonculture-expanded PBSCs are currently the most commonly used cells among all stem cell types derived from PB. Allogeneic, autologous, and xenogeneic PB-MSCs are more widely used in animal studies and are potential seed cell types for future applications. Improving the mobilization and purification technology, and shortening the culture cycle of culture-expanded PB-MSCs will obviously promote the researchers' interest. The use of PBSCs for cartilage repair and regeneration in vivo are safe. PBSCs considerably warrant further investigations due to their superiority and safety in clinical settings and positive effects despite limited evidence in humans.

11.
Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi ; 33(9): 1060-1063, 2019 Sep 15.
Article in Zh | MEDLINE | ID: mdl-31512443

ABSTRACT

OBJECTIVE: To review the advances in double-bundle anterior cruciate ligament (ACL) reconstruction in adolescents at home and abroad. METHODS: Recent literature about double-bundle ACL reconstruction in adolescents at home and abroad was extensively consulted, and the relationship between bone canal and epiphyseal plate, clinical verification of surgical safety, and clinical effectiveness of double-bundle ACL reconstruction in adolescents were summarized and analyzed. RESULTS: Double-bundle ACL reconstruction has certain advantages in clinical stability and re-rupture rate when compared with single-bundle ACL reconstruction in adolescents, and there is no significant difference in safety between them. CONCLUSION: Double-bundle ACL reconstruction in adolescents can achieve lower re-rupture rate and better stability when compared with single-bundle reconstruction. However, the sample size of clinical research is too small, and the follow-up time is too short, so the effectiveness needs to be continuously observed.


Subject(s)
Anterior Cruciate Ligament Injuries , Anterior Cruciate Ligament Reconstruction , Anterior Cruciate Ligament/surgery , Anterior Cruciate Ligament Injuries/surgery , Humans , Research/trends , Rupture , Treatment Outcome
SELECTION OF CITATIONS
SEARCH DETAIL