ABSTRACT
Polarons belong to a class of extensively studied quasiparticles that have found applications spanning diverse fields, including charge transport, colossal magnetoresistance, thermoelectricity, (multi)ferroism, optoelectronics, and photovoltaics. It is notable, though, that their interaction with the local environment has been overlooked so far. We report an unexpected phenomenon of the solvent-induced generation of polaronic spin active states in a two-dimensional (2D) material fluorographene under UV light. Furthermore, we present compelling evidence of the solvent-specific nature of this phenomenon. The generation of spin-active states is robust in acetone, moderate in benzene, and absent in cyclohexane. Continuous wave X-band electron paramagnetic resonance (EPR) spectroscopy experiments revealed a massive increase in the EPR signal for fluorographene dispersed in acetone under UV-light irradiation, while the system did not show any significant signal under dark conditions and without the solvent. The patterns appeared due to the generation of transient magnetic photoexcited states of polaronic character, which encompassed the net 1/2 spin moment detectable by EPR. Advanced ab initio calculations disclosed that polarons are plausibly formed at radical sites in fluorographene which interact strongly with acetone molecules in their vicinity. Additionally, we present a comprehensive scenario for multiplication of polaronic spin active species, highlighting the pivotal role of the photoinduced charge transfer from the solvent to the electrophilic radical centers in fluorographene. We believe that the solvent-tunable polaron formation with the use of UV light and an easily accessible 2D nanomaterial opens up a wide range of future applications, ranging from molecular sensing to magneto-optical devices.
ABSTRACT
Triarylhydrazones represent an attractive class of photochromic compounds offering many interesting features including high molar absorptivity, good addressability, and extraordinary thermal stability. In addition, unlike most other hydrazone-based photoswitches, they effectively absorb light above 365â nm. However, previously prepared triaryhydrazones suffer from low quantum yields of the ZâE photoisomerization. Here, we have designed a new subclass of naphthoyl-benzothiazole hydrazones that balance the most beneficial features of previously reported naphthoyl-quinoline and benzoyl-pyridine triarylhydrazones. These preserve the attractive absorption characteristics, exhibit higher thermal stability of the metastable form than the former and enhance the rate of the ZâE photoisomerization compared to the later, as a result of the weakening of the intramolecular hydrogen bonding between the hydrazone hydrogen and the benzothiazole moiety. Introducing the benzothiazole motif extends the tunability of the photochromic behaviour of hydrazone-based switches.
ABSTRACT
Invited for the cover of this issue are Marek Cigán, Anna M. Grabarz and co-workers. The image depicts how a non-expert might imagine a "molecular photoswitch". Read the full text of the article at 10.1002/chem.202303509.
ABSTRACT
Azonium ions formed by the protonation of tetra-ortho-methoxy-substituted aminoazobenzenes photoisomerize with red light under physiological conditions. This property makes them attractive as molecular tools for the photocontrol of physiological processes, for example, in photopharmacology. However, a mechanistic understanding of the photoisomerization process and subsequent thermal relaxation is necessary for the rational application of these compounds as well as for guiding the design of derivatives with improved properties. Using a combination of sub-ps/ns transient absorption measurements and quantum chemical calculations, we show that the absorption of a photon by the protonated E-H+ form of the photoswitch causes rapid (ps) isomerization to the protonated Z-H+ form, which can also absorb red light. Proton transfer to solvent then occurs on a microsecond time scale, leading to an equilibrium between Z and Z-H+ species, the position of which depends on the solution pH. Whereas thermal isomerization of the neutral Z form to the neutral E form is slow (â¼0.001 s-1), thermal isomerization of Z-H+ to E-H+ is rapid (â¼100 s-1), so the solution pH also governs the rate at which E/E-H+ concentrations are restored after a light pulse. This analysis provides the first complete mechanistic picture that explains the observed intricate photoswitching behavior of azonium ions at a range of pH values. It further suggests features of azonium ions that could be targeted for improvement to enhance the applicability of these compounds for the photocontrol of biomolecules.
ABSTRACT
Photoactivation of aspartic acid-based carbon dots (Asp-CDs) induces the generation of spin-separated species, including electron/hole (e- /h+ ) polarons and spin-coupled triplet states, as uniquely confirmed by the light-induced electron paramagnetic resonance spectroscopy. The relative population of the e- /h+ pairs and triplet species depends on the solvent polarity, featuring a substantial stabilization of the triplet state in a non-polar environment (benzene). The electronic properties of the photoexcited Asp-CDs emerge from their spatial organization being interpreted as multi-layer assemblies containing a hydrophobic carbonaceous core and a hydrophilic oxygen and nitrogen functionalized surface. The system properties are dissected theoretically by density functional theory in combination with molecular dynamics simulations on quasi-spherical assemblies of size-variant flakelike model systems, revealing the importance of size dependence and interlayer effects. The formation of the spin-separated states in Asp-CDs enables the photoproduction of hydrogen peroxide (H2 O2 ) from water and water/2-propanol mixture via a water oxidation reaction.
ABSTRACT
The amide bond is prominent in natural and synthetic organic molecules endowed with activity in various fields. Among a wide array of amide synthetic methods, substitution on a pre-existing (O)C-N moiety is an underexplored strategy for the synthesis of amides. In this work, we disclose a new protocol for the defluorinative arylation of aliphatic and aromatic trifluoroacetamides yielding aromatic amides. The mechanochemically induced reaction of either arylboronic acids, trimethoxyphenylsilanes, diaryliodonium salts, or dimethyl(phenyl)sulfonium salts with trifluoroacetamides affords substituted aromatic amides in good to excellent yields. These nickel-catalyzed reactions are enabled by C-CF3 bond activation using Dy2O3 as an additive. The current protocol provides versatile and scalable routes for accessing a wide variety of substituted aromatic amides. Moreover, the protocol described in this work overcomes the drawbacks and limitations in the previously reported methods.
ABSTRACT
The popularity of infrared (IR) spectroscopy is due to its high interpretive power. This study presents a new computational tool for analyzing the IR spectra of molecular complexes in terms of intermolecular interaction energy components. In particular, the proposed scheme enables associating the changes in the IR spectra occurring upon complex formation with individual types of intermolecular interactions (electrostatic, exchange, induction, and dispersion), thus providing a completely new insight into the relations between the spectral features and the nature of interactions in molecular complexes. To demonstrate its interpretive power, we analyze, for selected vibrational modes, which interaction types rule the IR intensity changes upon the formation of two different types of complexes, namely πâ¯π stacked (benzeneâ¯1,3,5-trifluorobenzene) and hydrogen-bonded (HCNâ¯HNC) systems. The exemplary applications of the new scheme to these two molecular complexes revealed that the interplay of interaction energy components governing their stability might be very different from that behind the IR intensity changes. For example, in the case of the dispersion-bound πâ¯π-type complex, dispersion contributions to the interaction induced IR intensity of the selected modes are notably smaller than their first-order (electrostatic and exchange) counterparts.
ABSTRACT
A recently developed computational scheme is employed to interpret changes in the infrared spectra of halogen-bonded systems in terms of intermolecular interaction energy components (electrostatic, exchange, induction, dispersion) taking pyridineâ¯perfluorohaloarene complexes as examples. For all complexes, we find a strong linear correlation between the different terms of the interaction-induced changes of the IR band associated with an intermolecular halogen bond stretching mode and the corresponding terms of the interaction energy, which implies that the interaction components play similar roles in both properties. This is not true for other vibrational modes localized in one of the monomers studied here, for which the corresponding interaction-induced changes in IR bands may present a completely different decomposition than the interaction energy.
ABSTRACT
Inorganic electrides have been proved to be efficient hosts for incorporating transition metals, which can effectively act as active sites giving an outstanding catalytic performance. Here, it is demonstrated that a reusable and recyclable (for more than 7 times) copper-based intermetallic electride catalyst (LaCu0.67 Si1.33 ), in which the Cu sites activated by anionic electrons with low-work function are uniformly dispersed in the lattice framework, shows vast potential for the selective C-H oxidation of industrially important hydrocarbons and cycloaddition of CO2 with epoxide. This leads to the production of value-added cyclic carbonates under mild reaction conditions. Importantly, the LaCu0.67 Si1.33 catalyst enables much higher turnover frequencies for the C-H oxidation (up to 25 276 h-1 ) and cycloaddition of CO2 into epoxide (up to 800 000 h-1 ), thus exceeding most nonnoble as well as noble metal catalysts. Density functional theory investigations have revealed that the LaCu0.67 Si1.33 catalyst is involved in the conversion of N-hydroxyphthalimide (NHPI) into the phthalimido-N-oxyl (PINO), which then triggers selective abstraction of an H atom from ethylbenzene for the generation of a radical susceptible to further oxygenation in the presence of O2 .
ABSTRACT
Anchoring single metal atoms on suitable substrates is a convenient route towards materials with unique electronic and magnetic properties exploitable in a wide range of applications including sensors, data storage, and single atom catalysis (SAC). Among a large portfolio of available substrates, carbon-based materials derived from graphene and its derivatives have received growing concern due to their high affinity to metals combined with biocompatibility, low toxicity, and accessibility. Cyanographene (GCN) as highly functionalized graphene containing homogeneously distributed nitrile groups perpendicular to the surface offers exceptionally favourable arrangement for anchoring metal atoms enabling efficient charge exchange between the metal and the substrate. However, the binding characteristics of metal species can be significantly affected by the coordination effects. Here we employed density functional theory (DFT) calculations to analyse the role of coordination in the binding of late 3d cations (Fe2+, Fe3+, Co2+, Ni2+, Cu2+, Cu+, and Zn2+) to GCN in aqueous solutions. The inspection of several plausible coordination types revealed the most favourable arrangements. Among the studied species, copper cations were found to be the most tightly bonded to GCN, which was also confirmed by the X-ray photoelectron spectroscopy (XPS), atomic absorption spectroscopy (AAS), and isothermal titration calorimetry (ITC) measurements. In general, the inclusion of coordination effects significantly reduced the binding affinities predicted by implicit solvation models. Clearly, to build-up reliable models of SAC architectures in the environments enabling the formation of a coordination sphere, such effects need to be properly taken into account.
Subject(s)
Graphite , Metals/chemistry , Copper/chemistry , CationsABSTRACT
Contemporary design of new organic non-linear optical (NLO) materials relies to a large extent on the understanding of molecular and electronic structure-property relationships revealed during the years by available computational approaches. The progress in theory-hand-in-hand with experiment-has enabled us to identify and analyze various physical aspects affecting the NLO responses, such as the environmental effects, molecular vibrations, frequency dispersion, and system dynamics. Although it is nowadays possible to reliably address these effects separately, the studies analyzing their mutual interplay are still very limited. Here, we employ density functional theory (DFT) methods in combination with an implicit solvent model to examine the solvent effects on the electronic and harmonic as well as anharmonic vibrational contributions to the static first hyperpolarizability of a series of push-pull α,ω-diphenylpolyene oligomers, which were experimentally shown to exhibit notable second-order NLO responses. We demonstrate that the magnitudes of both vibrational and electronic contributions being comparable in the gas phase significantly increase in solvents, and the enhancement can be, in some cases, as large as three- or even four-fold. The electrical and mechanical anharmonic contributions are not negligible but cancel each other out to a large extent. The computed dynamic solute NLO properties of the studied systems are shown to be in a fair agreement with those derived from experimentally measured electric-field-induced second-harmonic generation (EFISHG) signals. Our results substantiate the necessity to consider concomitantly both solvation and vibrational effects in modeling static NLO properties of solvated systems.
Subject(s)
Electricity , Vibration , SolventsABSTRACT
Single-atom catalysts (SACs) have aroused great attention due to their high atom efficiency and unprecedented catalytic properties. A remaining challenge is to anchor the single atoms individually on support materials via strong interactions. Herein, single atom Co sites have been developed on functionalized graphene by taking advantage of the strong interaction between Co2+ ions and the nitrile group of cyanographene. The potential of the material, which is named G(CN)Co, as a SAC is demonstrated using the electrocatalytic hydrazine oxidation reaction (HzOR). The material exhibits excellent catalytic activity for HzOR, driving the reaction with low overpotential and high current density while remaining stable during long reaction times. Thus, this material can be a promising alternative to conventional noble metal-based catalysts that are currently widely used in HzOR-based fuel cells. Density functional theory calculations of the reaction mechanism over the material reveal that the Co(II) sites on G(CN)Co can efficiently interact with hydrazine molecules and promote the NH bond-dissociation steps involved in the HzOR.
ABSTRACT
The design of P-type photoswitches with thermal stability of the metastable form of hundreds of years that would efficiently transform using excitation wavelengths above 350 nm remains a challenge in the field of photochromism. In this regard, we designed and synthesized an extended set of 13 pyridine/quinoline hydrazones and systematically investigated the structure-property relationships, defining their kinetic and photoswitching parameters. We show that the operational wavelengths of the pyridine hydrazone structural motif can be effectively shifted toward the visible region without simultaneous loss of their high thermal stability. Furthermore, we characterized the ground-state and excited-state potential energy surfaces with quantum-chemical calculations and ultrafast transient absorption spectroscopy, which allowed us to rationalize both the thermal and photochemical reaction mechanisms of the designed hydrazones. Whereas introducing an electron-withdrawing pyridyl moiety in benzoylpyridine hydrazones leads to thermal stabilities exceeding 200 years, extended π-conjugation in naphthoylquinoline hydrazones pushes the absorption maxima toward the visible spectral region. In either case, the compounds retain highly efficient photoswitching characteristics. Our findings open a route to the rational design of a new family of hydrazone-based P-type photoswitches with high application potential in photonics or photopharmacology.
ABSTRACT
Following our study on hydrogen-bonded (HB) complexes [Phys. Chem. Chem. Phys., 2018, 20, 19841], the physical nature of interaction-induced (non)linear optical properties of another important class of molecular complexes, namely halogen-bonded (XB) systems, was analyzed in this study. The excess electronic and nuclear relaxation (hyper)polarizabilities of nine representative XB complexes covering a wide range of halogen-bond strengths were computed. The partitioning of the excess properties into individual interaction-energy components (electrostatic, exchange, induction, dispersion) was performed by using the variational-perturbational energy decomposition scheme at the MP2/aug-cc-pVTZ level of theory and further supported by calculations with the SCS-MP2 method. In the case of the electronic interaction-induced properties, the physical composition of Δαel and Δγel was found to be very similar for the two types of bonding, despite the different nature of the binding. For Δßel, the XB complexes exhibit a more systematic interplay of interaction-energy contributions compared to the HB systems studied in the previous work. Our analysis revealed that the patterns of interaction-energy contributions to the interaction-induced nuclear-relaxation contributions to the linear polarizability and the first hyperpolarizability are very similar. For both properties the exchange repulsion term is canceled out by the electrostatic and delocalization terms. The physical composition of these contributions is analogous to those observed for the HB complexes.
ABSTRACT
Understanding the effects of different fundamental intermolecular interactions on nonlinear optical properties is crucial for proposing efficient strategies to obtain new materials with tailored properties. In this study, we computed the electronic and vibrational (hyper)polarizabilities of ten hydrogen-bonded molecular complexes employing the MP2, CCSD and CCSD(T) methods combined with the aug-cc-pVTZ basis set. The vibrational contributions to hyperpolarizabilities included nuclear-relaxation anharmonic corrections. The effect of intermolecular interactions was analyzed in terms of excess properties, which are defined as the difference between a property of the complex and the net properties of the noninteracting subsystems. Considering systems covering a wide range of hydrogen bond strengths, the electronic and vibrational excess (hyper)polarizabilities were decomposed into different interaction energy contributions (electrostatic, exchange, induction and dispersion). This systematic study, the very first of this kind, revealed that the physical origins of the electronic and vibrational excess properties are completely different. In the case of vibrational contributions, the decomposition pattern is very similar for the polarizability and first and second hyperpolarizabilities. The exchange contributions to excess vibrational properties are the largest and they have an opposite sign to the electrostatic, induction and dispersion terms. On the other hand, no general patterns can be established for the electronic excess properties.
ABSTRACT
Donor-acceptor Stenhouse adducts (DASAs) are a rapidly emerging class of visible light-activatable negative photochromes. They are closely related to (mero)cyanine dyes with the sole difference being a hydroxy group in the polyene chain. The presence or absence of the hydroxy group has far-reaching consequences for the photochemistry of the compound: cyanine dyes are widely used as fluorescent probes, whereas DASAs hold great promise for visible light-triggered photoswitching. Here we analyze the photophysical properties of a DASA lacking the hydroxy group. Ultrafast time-resolved pump-probe spectroscopy in both the visible and IR region show the occurrence of E-Z photoisomerization on a 20 ps time scale, similar to the photochemical behavior of DASAs, but on a slower time scale. In contrast to the parent DASA compounds, where the initial photoisomerization is constrained to a single position (next to the hydroxy group), 1H NMR in situ-irradiation studies at 213 K reveal that for nonhydroxy DASAs E-Z photoisomerization can take place at two different bonds, yielding two distinct isomers. These observations are supported by TD-DFT calculations, showing that in the excited state the hydroxy group (pre)selects the neighboring C2-C3 bond for isomerization. The TD-DFT analysis also explains the larger solvatochromic shift observed for the parent DASAs as compared to the nonhydroxy analogue, in terms of the dipole moment changes evoked upon excitation. Furthermore, computations provide helpful insights into the photoswitching energetics, indicating that without the hydroxy group the 4π-electrocyclization step is energetically forbidden. Our results establish the central role of the hydroxy group for DASA photoswitching and suggest that its introduction allows for tailoring photoisomerization pathways, presumably both through (steric) fixation via a hydrogen bond with the adjacent carbonyl group of the acceptor moiety, as well as through electronic effects on the polyene backbone. These insights are essential for the rational design of novel, improved DASA photoswitches and for a better understanding of the properties of both DASAs and cyanine dyes.
ABSTRACT
Donor-acceptor Stenhouse adducts (DASAs) are negative photochromes that switch with visible light and are highly promising for applications ranging from smart materials to biological systems. However, the strong solvent dependence of the photoswitching kinetics limits their application. The nature of the photoswitching mechanism in different solvents is key for addressing the solvatochromism of DASAs, but as yet has remained elusive. Here, we employ spectroscopic analyses and TD-DFT calculations to reveal changing solvatochromic shifts and energies of the species involved in DASA photoswitching. Time-resolved visible pump-probe spectroscopy suggests that the primary photochemical step remains the same, irrespective of the polarity and protic nature of the solvent. Disentangling the different factors determining the solvent-dependence of DASA photoswitching, presented here, is crucial for the rational development of applications in a wide range of different media.
ABSTRACT
Donor-acceptor Stenhouse adducts (DASAs) are negative photochromes that hold great promise for a variety of applications. Key to optimizing their switching properties is a detailed understanding of the photoswitching mechanism, which, as yet, is absent. Here we characterize the actinic step of DASA-photoswitching and its key intermediate, which was studied using a combination of ultrafast visible and IR pump-probe spectroscopies and TD-DFT calculations. Comparison of the time-resolved IR spectra with DFT computations allowed to unambiguously identify the structure of the intermediate, confirming that light absorption induces a sequential reaction path in which a Z-E photoisomerization of C2-C3 is followed by a rotation around C3-C4 and a subsequent thermal cyclization step. First and second-generation DASAs share a common photoisomerization mechanism in chlorinated solvents with notable differences in kinetics and lifetimes of the excited states. The photogenerated intermediate of the second-generation DASA was photo-accumulated at low temperature and probed with time-resolved spectroscopy, demonstrating the photoreversibility of the isomerization process. Taken together, these results provide a detailed picture of the DASA isomerization pathway on a molecular level.
ABSTRACT
Betaineâ 30 is known for the extraordinary solvatochromism of its visible absorption band that goes from λ=882â nm in tetrachloromethane to λ=453â nm in water (Δλ=-429â nm). This large blueshift partly originates from a dramatic decrease of the dipole moment upon excitation. Despite several decades of research, experimental works still disagree on the exact value of the excess dipole moment, the orientation of the dipole moment of the excited-state, the role and amplitude of the change of the polarisability upon excitation as well as on the gas-phase excitation energy. In this work, we present an in-depth theoretical investigation. First, we carefully tested several levels of theory on the model system and next calculated the electric properties of betaineâ 30 at the CC2 level. Our best estimates are Δµ=-7â D for the excess dipole moment, that is, a significant decrease but no change of direction, a Δα value of -120â a.u. and a gas-phase vertical excitation energy of 1.127â eV. The implicit solvation models are able to reproduce the experimental trends, with large correlation coefficients for non-hydrogen-bond-donating solvents, the smallest root-mean-square deviation error being reached with the vertical excitation model (VEM). The explicit effective fragment potential method combined with time-dependent density functional theory (TD-DFT) in a QM/MM framework provides accurate estimates for hydrogen-bond-donating solvents, whereas the addition of a dispersion correction is needed to restore the correct solvatochromic direction in tetrachloromethane.