ABSTRACT
Background and Objectives: The use of biomaterials in dentistry is extremely common. From a commercial perspective, different types of osteoconductive and osteoinductive biomaterials are available to clinicians. In the field of osteoconductive materials, clinicians have biomaterials made of heterologous bones at their disposal, including biomaterials of bovine, porcine, and equine origins, and biomaterials of natural origin, such as corals and hydroxyapatites. In recent years, it has become possible to synthesize nano-Ha and produce scaffolds using digital information. Although a large variety of biomaterials has been produced, there is no scientific evidence that proves their absolute indispensability in terms of the preservation of postextraction sites or in the execution of guided bone regeneration. While there is no scientific evidence showing that one material is better than another, there is evidence suggesting that several products have better in situ permanence. This article describes a preliminary study to evaluate the histological results, ISQ values, and prevalence of nano-HA. Materials and Methods: In this study, we planned to use a new biomaterial based on nanohydroxyapatite for implantation at one postextraction site; the nano-HA in this study was NuvaBONE (Overmed, Buccinasco, Milano, Italy). This is a synthetic bone graft substitute that is based on nanostructured biomimetic hydroxyapatite for application in oral-maxillofacial surgery, orthopedics, traumatology, spine surgery, and neurosurgery. In our pilot case, a patient with a hopeless tooth underwent extraction, and the large defect remaining after the removal of the tooth was filled with nano-HA to restore the volume. Twelve months later, the patient was booked for implant surgery to replace the missing tooth. At the time of the surgery, a biopsy of the regenerated tissue was taken using a trephine of 4 mm in the inner side and 8 mm deep. Results: The histological results of the biopsy showed abundant bone formation, high values of ISQ increasing from the insertion to the prosthetic phase, and a good reorganization of hydroxyapatite granules during resorption. The implant is in good function, and the replaced tooth shows good esthetics. Conclusions: The good results of this pilot case indicate starting the next Multicentric study to have more and clearer information about this nanohydroxyapatite (NH) compared with control sites.
Subject(s)
Durapatite , Tooth Socket , Humans , Biocompatible Materials/therapeutic use , Bone Regeneration , Durapatite/therapeutic use , Multicenter Studies as Topic , Tooth Socket/surgeryABSTRACT
Psoriatic arthritis is defined as chronic inflammatory arthritis associated with psoriasis. The current data regarding gender differences in clinical manifestation and therapeutic outcomes of psoriatic arthritis are limited. Generally, men show a peripheral disease manifestation, while women have an axial distribution of the lesions. If we look at temporomandibular joint (TMJ) involvement, epidemiological data on the involvement of the TMJ are hard to find. Few studies on therapeutic management and the related impact on the quality of life are reported in the literature. Given the morpho-functional peculiarities of the TMJ and the different pain burdens between male and female genders, when manifestation of psoriatic arthritis occurs, clinicians should face it using a multidisciplinary approach for a correct diagnosis and successful treatment. This review aims to examine the diagnostic signs of psoriatic arthritis in the TMJ, the eventual variations of this disease in male and female patients, and the therapeutical strategies. The coordination of different specialties is fundamental to the remission of clinical symptoms and lesion regression.
ABSTRACT
The use of dental implants for prosthetic rehabilitation in dentistry is based on the concept of osteointegration. This concept enables the clinical stability of the implants and a total absence of inflammatory tissue between the implant surface and the bone tissue. For this reason, it is essential to understand the role of the titanium surface in promoting and maintaining or not maintaining contact between the bone matrix and the surface of the titanium implant. MATERIALS AND METHODS: Five types of titanium discs placed in contact with osteoblast cultures of osteosarcomas were studied. The materials had different roughness. Scanning electron microscopy (SEM) photos were taken before the in vitro culture to analyze the surfaces, and at the end of the culturing time, the different gene expressions of a broad pattern of proteins were evaluated to analyze the osteoblast response, as indicated in the scientific literature. RESULTS: It was demonstrated that the responses of the osteoblasts were different in the five cultures in contact with the five titanium discs with different surfaces; in particular, the response in the production of some proteins was statistically significant. DISCUSSION: The key role of titanium surfaces underlines how it is still possible to carry out increasingly accurate and targeted studies in the search for new surfaces capable of stimulating a better osteoblastic response and the long-term maintenance of osteointegration.
ABSTRACT
BACKGROUND: The long-term success of implant therapy depends not only on proper osseointegration, but also on the healing of the epithelium and the quality of the biological seal on the abutment and on the implant neck. This study aims to evaluate the possible use of dentinal adhesives on the surface of the transmucosal path of dental implants in order to create a hermetic seal between keratinized epithelium and abutment. METHODS: Four sections of 12 µm thickness were obtained from a sample of the oral mucosa. Scotchbond TM Universal Adhesive (3M ESPE, Seefeld, Germany) was carefully applied both to the samples and to the transmucosal path of titanium abutment (Win-Six, BioSAFin, Italy). The adhesives were polymerized. FT-IR analysis was performed on: 1) polymerized Scotchbond Universal Adhesive (3M ESPE, Seefeld, Germany); 2) the interface between the titanium abutment and the adhesive; 3) the interface between the adhesive and the mucosa; 4) the mucosa samples. RESULTS: Comparing the spectra, it emerged that the adhesive has established chemical bonds both on titanium and on the keratinized mucosa, involving different types of chemical interactions. CONCLUSIONS: The results of this in-vitro study are encouraging. In the future biocompatibility and comparative study with other adhesives will be required.
Subject(s)
Caniformia , Mouth Mucosa , Animals , Spectroscopy, Fourier Transform Infrared , Titanium , Research DesignABSTRACT
Subperiosteal implants were introduced in the last century. Poor clinical results led those implants to be progressively abandoned. Recently, several Authors suggested a revival of subperiosteal implants as an alternative to regenerative procedures. The purpose of this study was to describe the clinical application of custom-made additively manufactured subperiosteal implant for fixed prosthetic rehabilitation of edentulous maxilla. Plaster models of the upper and the lower arch were scanned, as well as the mock-up. Digital Imaging and Communications in Medicine data obtained from cone beam computed tomography were processed through the thresholding procedure. The design of the subperiosteal implant was drawn on the stereolithographic model and scanned. Once the digital project of the subperiosteal implant was completed, it was sent to additive manufacturing. After the surgery, the patient was strictly monitored for up to 2 years. The outcomes were assessed based on the incurrence of biological and mechanical complications, postoperative complications, and implant survival. The patient did not suffer from postoperative complications. Neither biological nor mechanical complications occurred during the follow-up period. At the end of the study, the implant was still in function. Custom-made subperiosteal implants could be considered as an alternative to regenerative procedures for the rehabilitation of severe bone atrophy. Further studies are needed in the future to confirm the positive outcome.
Subject(s)
Dental Implants , Mouth, Edentulous , Humans , Dental Implantation, Endosseous/methods , Mouth, Edentulous/surgery , Maxilla/diagnostic imaging , Maxilla/surgery , AtrophyABSTRACT
The aim of this study was to compare the epithelial biological response to machined titanium Ti-6Al-4V grade 5 and titanium Ti-6Al-4V grade 5 coated with zirconia (ZrN) by physical vapor deposition (PVD). Human keratinocytes were cultured in six-well plates. Machined titanium TiAl4V4 grade 5 (T1) and ZrN-coated titanium TiAl4V4 grade 5 (T2) discs were placed in two different wells. The remaining two wells served as control (C). Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) were performed to compare the T1 and T2 surfaces. Subsequent analyses were performed to explore the effect of T1 and T2 contact with human keratinocyte HUKE cell lines. Cell viability was evaluated using a trypan blue exclusion test and MTT assay. Cell lysates from C, T1, and T2 were Western blotted to evaluate E-cadherin and Integrin-α6ß4 expression. SEM revealed that T2 was smoother and more homogeneous than T1. EDS showed homogeneous and uniform distribution of ZrN coating on T2. Cell viability analyses did not show significant differences between T1 and T2. Furthermore, E-cadherin and Integrin-α6ß4 expressions of the epithelial cells cultured in T1 and T2 were similar. Therefore, titanium Ti-6Al-4V grade 5 surfaces coated with ZrN by PVD seem to be similar substrates to the uncoated surfaces for keratinocyte adhesion and proliferation.
ABSTRACT
Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens' enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey's test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.
ABSTRACT
One of the current major challenges in implant therapy is to minimize marginal bone loss around implants, since it can trigger bacterial colonization of the implant's neck, leading to its failure. The present study aimed (1) to scientifically validate a new mathematical rule based on soft tissues thickness, for choosing the correct implant position with respect to the bone level, in order to provide a better tissue adaptation to the abutment/implant surface to avoid bacterial invasion, and (2) to apply this mathematical rule to the Biological Oriented Immediate Loading (B.O.I.L.) surgical protocol, avoiding peri-implant bone resorption. N. 127 implants were inserted following B.O.I.L. protocol: implants were placed according to the mathematical rule Y = X - 3, which correlates the position of the implant from the bone crest level (Y) with the thickness of the soft tissues (X). All the implants were inserted in fresh extraction sockets, and immediately loaded with temporary abutments and prostheses. Bone levels were evaluated through radiographic examination just after surgical procedure (T0), and after 10 days (10D), 6 months (6M), 1 year (1Y), and 5 years (5Y). After 5 years, the implant survival rate was 100%, with a medium marginal bone loss around implants of 0.0704 mm (SD = 0.169 mm). One-way ANOVA, followed by Tukey's multiple comparison test was performed for statistical evaluations (p < 0.05). This protocol provided a safe and successful procedure, with a good soft tissue seal against bacterial challenge. The application of the mathematical rule allows the implant placement in a correct vertical position from the bone crest, avoiding bone resorption and bacterial infiltrations. Moreover, the use of Multi Unit Abutment (MUA) determined a stable biological seal, favouring the implant healing and preserving the adhesion of hemidesmosomes to the titanium of MUA.
ABSTRACT
Clear and removable tooth aligners for orthodontics treatments have become an increasingly popular alternative to fixed appliances. Even if protocols suggest removing aligners before eating or drinking, most patients retain them when they drink beverages. Alterations in the material during the daily use could determine a reduction in the application forces, affecting the desired orthodontic movement; the knowledge of how this material reacts when subjected to different aging processes is mandatory to establish the predictability of the orthodontic treatment. According to this, the aim of the present study was to assess a new objective approach, coupling spectroscopic and chemometric tools, to evaluate the changes occurring in Invisalign® aligners, the most widely used brand, exposed in vitro to coffee, tea, Coca Cola® and UV radiation for 24 and 48 h. In particular, ATR-FTIR spectroscopy was utilized to characterize, at the molecular level, the chemical and color modifications in the surfaces of the appliances; the obtained data were submitted to PCA and one-way ANOVA and Tukey's multiple comparison test. Moreover, a colorimetry analysis was carried out to evaluate any changes in color and transparency. Coffee and tea samples displayed the major color changes between the tested groups. The differences highlighted in the spectral features of coffee, tea and UV-treated samples were mainly ascribable to color and transparency changes, because the chemical properties remained unaltered.
ABSTRACT
PURPOSE: Several recent medical reports have focused attention on the possible application of skeletal scintigraphy imaging in odontostomatology. The aim of the present report was to assess the influence of immediate prosthetic loading on peri-implant osteoblastic activity through bone scintigraphy. MATERIALS AND METHODS: Implants were placed in 2 healthy women. A nuclear medicine investigation with single-photon emission-computed tomography (SPECT) was performed for both patients at 30 and 90 days after implant placement. The study was completed with acquisitions of planar images of the skull in an anterior view and the use of regions of interest (ROIs) of the same size in the area corresponding to immediate loading and in the opposite hemimandible (at the control sites). Count density ratios (counts/pixel) obtained from each ROI were used for a quantitative/relative assessment. Tomographic images were evaluated with a qualitative method. The spatial resolution of the reconstructed tomograms and of the planar images was approximately 7 mm. RESULTS: Routine planar methodology provided a direct measure of cellular activity of the examined areas. The difference in count density ratio registered from the same ROI between the first and the second scintigraphy revealed the course of peri-implant osteoblastic activity, which was very high in the first month and then declined during subsequent months. DISCUSSION AND CONCLUSION: In spite of the small number of involved patients, the results obtained from this pilot study suggest that nuclear medicine may hold possible advantages in implant dentistry for those who seek to clarify the still unknown aspects of osteoblastic activity.