Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 82
Filter
1.
J Am Chem Soc ; 145(14): 7712-7717, 2023 Apr 12.
Article in English | MEDLINE | ID: mdl-36862978

ABSTRACT

Zeolite molecular sieves with at least eight-membered rings are widely applied in industrial applications, while zeolite crystals with six-membered rings are normally regarded as useless products due to the occupancy of the organic templates and/or inorganic cation in the micropores that could not be removed. Herein, we showed that a novel six-membered ring molecular sieve (ZJM-9) with fully open micropores could be achieved by a reconstruction route. The mixed gas breakthrough experiments such as CH3OH/H2O, CH4/H2O, CO2/H2O, and CO/H2O at 25 °C showed that this molecular sieve was efficient for selective dehydration. Particularly, a lower desorption temperature (95 °C) of ZJM-9 than that (250 °C) of the commercial 3A molecular sieve might offer an opportunity for saving more energy in dehydration processes.

2.
J Am Chem Soc ; 145(31): 17284-17291, 2023 Aug 09.
Article in English | MEDLINE | ID: mdl-37489934

ABSTRACT

Germanosilicate zeolites with various structures have been extensively synthesized, but the syntheses of corresponding zeolite structures in the absence of germanium species remain a challenge. One such example is an ITR zeolite structure, which is a twin of the ITH zeolite structure. Through the modification of a classic organic template for synthesizing ITH zeolites and thus designing a new organic template with high compatibility to ITR zeolite assisted by theoretical simulation, we, for the first time, show the Ge-free synthesis of an ITR structure including pure silica, aluminosilicate, and borosilicate ITR zeolites. These materials have high crystallinity, corresponding to an ITR content of more than 95%. In the methanol-to-propylene (MTP) reaction, the obtained aluminosilicate ITR zeolite exhibits excellent propylene selectivity and a long lifetime compared with conventional aluminosilicate ZSM-5 zeolite. The strategy for the design of organic templates might offer a new opportunity for rational syntheses of novel zeolites and, thus, the development of highly efficient zeolite catalysts in the future.

3.
Small ; 19(36): e2301875, 2023 Sep.
Article in English | MEDLINE | ID: mdl-37116082

ABSTRACT

The development of catalytic systems that can activate aryl chlorides for palladium-catalyzed cross-coupling reactions is at the forefront of ongoing efforts to synthesize fine chemicals. In this study, a facile ligand-template approach is adopted to achieve active-site encapsulation by forming supramolecular assemblies; this bestowed the pristine inert counterparts with reactivity, which is further increased upon the construction of a porous framework. Experimental results indicated that the isolation of ligands by the surrounding template units is key to the formation of catalytically active monoligated palladium complexes. Additionally, the construction of porous frameworks using the resulting supramolecular assemblies prevented the decomposition of the Pd complexes into nanoparticles, which drastically increased the catalyst lifetime. These findings, along with the simplicity and generality of the synthesis scheme, suggest that the strategy can be leveraged to achieve unique reactivity and potentially enable fine-chemical synthesis.

4.
J Environ Sci (China) ; 123: 15-29, 2023 Jan.
Article in English | MEDLINE | ID: mdl-36521980

ABSTRACT

Diesel vehicles have caused serious environmental problems in China. Hence, the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard. To fulfill this stringent legislation, two major technical routes, including the exhaust gas recirculation (EGR) and high-efficiency selective catalytic reduction (SCR) routes, have been developed for diesel engines. Moreover, complicated aftertreatment technologies have also been developed, including use of a diesel oxidation catalyst (DOC) for controlling carbon monoxide (CO) and hydrocarbon (HC) emissions, diesel particulate filter (DPF) for particle mass (PM) emission control, SCR for the control of NOx emission, and an ammonia slip catalyst (ASC) for the control of unreacted NH3. Due to the stringent requirements of the China VI standard, the aftertreatment system needs to be more deeply integrated with the engine system. In the future, aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.


Subject(s)
Air Pollutants , Air Pollution , Air Pollutants/analysis , Vehicle Emissions/prevention & control , Vehicle Emissions/analysis , Air Pollution/prevention & control , Air Pollution/analysis , Catalysis , China , Gasoline , Particulate Matter/analysis , Motor Vehicles
5.
Angew Chem Int Ed Engl ; 62(32): e202306174, 2023 Aug 07.
Article in English | MEDLINE | ID: mdl-37190928

ABSTRACT

Cu-exchanged low-silica CHA zeolites (Si/Al≤4) synthesized without organic templates are promising candidate catalysts for ammonia selective catalytic reduction of nitrogen oxides (NH3 -SCR), but their practical application is restricted due to the low hydrothermal stability. Here, inspired by the transcription from duplex DNA to RNA, we synthesized Al pairs enriched low-silica CHA zeolite (CHA-SPAEI, Si/Al=3.7) by using silicoaluminophosphate (SAPO) featured by strict alternation of -Al-O-P(Si)-O-Al-O- tetrahedra as seed. The proportion of Al pairs in CHA-SPAEI is 78 %, which is much higher than that in the conventional low-silica CHA (CHA-LS, 52 %). After hydrothermal ageing at 800 °C for 6 h, Cu-exchanged CHA-SPAEI shows NO conversion above 90 % within 225-500 °C under a gas hourly space velocity of 200,000 h-1 , which is much better than that of Cu-exchanged CHA-LS. The spatial close proximity of Al pairs in CHA-SPAEI is confirmed by the 27 Al double-quantum single-quantum two-dimensional NMR analyses. The strict -P(Si)-O-Al-O-P(Si)-O- sequence in the fragments from the dissolution of SAPO seed promotes the Al pairs with the -Al-O-Si-O-Al-O- sequence via a transcription process. The utilization of aluminophosphate-based zeolites as seeds opens up a new avenue for the regulation of the Al distribution in zeolites.

6.
J Am Chem Soc ; 144(14): 6270-6277, 2022 Apr 13.
Article in English | MEDLINE | ID: mdl-35271271

ABSTRACT

Zeolite nanosheets with excellent mass transfer are attractive, but their successful syntheses are normally resulted from a huge number of experiments. Here, we show the design of a small organic template for the synthesis of self-pillared pentasil (SPP) zeolite nanosheets from theoretical calculations in interaction energies between organic templates and pentasil zeolite skeletons. As expected, the SPP zeolite nanosheets with the thickness at 10-20 nm have been synthesized successfully. Characterizations show that the SPP zeolite nanosheets with about 90% MFI and 10% MEL structures have good crystallinity, the house-of-card morphology, large surface area, and fully four-coordinated aluminum species. More importantly, methanol-to-propylene tests show that the SPP zeolite nanosheets exhibit much higher propylene selectivity and longer reaction lifetime than conventional ZSM-5 zeolite. These results offer a good opportunity to develop highly efficient zeolite catalysts in the future.

7.
Chemistry ; 27(34): 8684-8688, 2021 Jun 16.
Article in English | MEDLINE | ID: mdl-33852191

ABSTRACT

Direct C-H bond transformation has been regarded as one of the most important areas in organic synthesis in both academia and industry. However, the heterogeneous transition-metal-free catalysis of direct C-H bond transformation has remained a contemporary challenge. To tackle this challenge, we designed and constructed a porous phenanthroline-based polymer (namely POP-Phen) via free radical polymerization of vinyl-functionalized phenanthroline monomers. POP-Phen shows excellent catalytic performances in transition-metal-free catalyzed C-H arylation, even better than those of the corresponding homogeneous catalyst, which is mainly attributed to the high density of catalytically active sites in the heterogeneous catalyst. Kinetic isotope experiments and spectral characterizations demonstrate the electron-transfer between the heterogeneous catalyst and the base (t-BuOK), a key step for C-H activation. We believe that this porous organic phenanthroline polymer could open a new door for the design of novel heterogeneous transition-metal-free catalysts for direct C-H activation.

8.
Molecules ; 26(16)2021 Aug 17.
Article in English | MEDLINE | ID: mdl-34443557

ABSTRACT

The first production of defibrillated celluloses from microalgal biomass using acid-free, TEMPO-free and bleach-free hydrothermal microwave processing is reported. Two routes were explored: i. direct microwave process of native microalgae ("standard"), and ii. scCO2 pre-treatment followed by microwave processing. ScCO2 was investigated as it is commonly used to extract lipids and generates considerable quantities of spent algal biomass. Defibrillation was evidenced in both cases to afford cellulosic strands, which progressively decreased in their width and length as the microwave processing temperature increased from 160 °C to 220 °C. Lower temperatures revealed aspect ratios similar to microfibrillated cellulose whilst at the highest temperature (220 °C), a mixture of microfibrillated cellulose and nanocrystals were evidenced. XRD studies showed similar patterns to cellulose I but also some unresolved peaks. The crystallinity index (CrI), determined by XRD, increased with increasing microwave processing temperature. The water holding capacity (WHC) of all materials was approximately 4.5 g H2O/g sample. The materials were able to form partially stable hydrogels, but only with those processed above 200 °C and at a concentration of 3 wt% in water. This unique work provides a new set of materials with potential applications in the packaging, food, pharmaceutical and cosmetic industries.


Subject(s)
Microalgae/metabolism , Microalgae/radiation effects , Microwaves , Cellulose/biosynthesis , Cellulose/chemistry , Temperature , Water/chemistry
9.
J Am Chem Soc ; 142(38): 16429-16436, 2020 09 23.
Article in English | MEDLINE | ID: mdl-32862644

ABSTRACT

Nonoxidative dehydrogenation is promising for production of light olefins from shale gas, but current technology relies on precious Pt or toxic Cr catalysts and suffers from thermodynamically oriented coke formation. To solve these issues, the earth-abundant iron catalyst is employed, where Fe species are effectively modulated by siliceous zeolite, which is realized by the synthesis of Fe-containing MFI siliceous zeolite in the presence of ethylenediaminetetraacetic sodium (FeS-1-EDTA). Catalytic tests in ethane dehydrogenation show that this catalyst has a superior coke resistance in a 200 h run without any deactivation with extremely high activity and selectivity (e.g., 26.3% conversion and over 97.5% selectivity to ethene in at 873 K, close to the thermodynamic equilibrium limitation). Multiple characterizations demonstrate that the catalyst has uniformly and stably isolated Fe sites, which improves ethane dehydrogenation to facilitate the fast desorption of hydrogen and olefin products in the zeolite micropores and hinders the coke formation, as also identified by density functional calculations.

10.
Chemistry ; 26(50): 11408-11411, 2020 Sep 04.
Article in English | MEDLINE | ID: mdl-32515846

ABSTRACT

Unlike conventional aluminosilicate zeolites synthesized in alkaline media, aluminophosphate molecular sieves (AlPOs) have always been prepared under acidic conditions in the past three decades; this has been regarded as one of essential factors for synthesis, except for the case of silica-substituted analogues (SAPOs). For the first time, we demonstrate herein a simple and generalized route for synthesizing various types of aluminophosphate molecular sieves in alkaline media. A series of aluminophosphate sieves and their analogues have been prepared with different quaternary ammonium cations as structure-directing agents in this manner. The above successes have extended the systematic media from acidic or neutral to alkaline for the preparation of a series of aluminophosphate molecular sieves, which possibly open an alternative route for the synthesis of aluminophosphate molecular sieves.

11.
Angew Chem Int Ed Engl ; 59(36): 15649-15655, 2020 Sep 01.
Article in English | MEDLINE | ID: mdl-32453899

ABSTRACT

There are a large number of zeolites, such as ITH, that cannot be prepared in the aluminosilicate form. Now, the successful synthesis of aluminosilicate ITH zeolite using a simple cationic oligomer as an organic template is presented. Key to the success is that the cationic oligomer has a strong complexation ability with aluminum species combined with a structural directing ability for the ITH structure similar to that of the conventional organic template. The aluminosilicate ITH zeolite has very high crystallinity, nanosheet-like crystal morphology, large surface area, fully four-coordinated Al species, and abundant acidic sites. Methanol-to-propylene (MTP) tests reveal that the Al-ITH zeolite shows much higher selectivity for propylene and longer lifetime than commercial ZSM-5. FCC tests show that Al-ITH zeolite is a good candidate as a shape-selective FCC additive for enhancing propylene and butylene selectivity.

12.
J Am Chem Soc ; 141(7): 2975-2983, 2019 Feb 20.
Article in English | MEDLINE | ID: mdl-30677301

ABSTRACT

Classical strong metal-support interactions (SMSI), which play a crucial role in the preparation of supported metal nanoparticle catalysts, is one of the most important concepts in heterogeneous catalysis. The conventional wisdom for construction of classical SMSI involves in redox treatments at high-temperatures by molecular oxygen or hydrogen, sometimes causing sintered metal nanoparticles before SMSI formation. Herein, we report that the aforementioned issue can be effectively avoided by a wet-chemistry methodology. As a typical example, we demonstrate a new concept of wet-chemistry SMSI (wcSMSI) that can be constructed on titania-supported Au nanoparticles (Au/TiO2-wcSMSI), where the key is to employ a redox interaction between Auδ+ and Ti3+ precursors in aqueous solution. The wcSMSI is evidenced by covering Au nanoparticles with the TiO x overlayer, electronic interaction between Au and TiO2, and suppression of CO adsorption on Au nanoparticles. Owing to the wcSMSI, the Au-TiO x interface with an improved redox property is favorable for oxygen activation, accelerating CO oxidation. In addition, the oxide overlayer efficiently stabilizes the Au nanoparticles, achieving sinter-resistant Au/TiO2-wcSMSI catalyst in CO oxidation.

13.
J Am Chem Soc ; 141(21): 8482-8488, 2019 May 29.
Article in English | MEDLINE | ID: mdl-31063372

ABSTRACT

Supported rhodium nanoparticles (NPs) are well-known for catalyzing methanation in CO2 hydrogenation. Now we demonstrate that the selectivity in this process can be optimized for CO production by choice of molecular sieve crystals as supports. The NPs are enveloped within the crystals with controlled nanopore environments that allow tuning of the catalytic selectivity to minimize methanation and favor the reverse water-gas shift reaction. Pure silica MFI (S-1)-fixed rhodium NPs exhibited maximized CO selectivity at high CO2 conversions, whereas aluminosilicate MFI zeolite-supported rhodium NPs displayed high methane selectivity under the equivalent conditions. Strong correlations were observed between the nanoporous environment and catalytic selectivity, indicating that S-1 minimizes hydrogen spillover and favors fast desorption of CO to limit deep hydrogenation. Materials in this class appear to offer appealing opportunities for tailoring selective supported catalysts for a variety of reactions.

14.
J Am Chem Soc ; 141(45): 18318-18324, 2019 Nov 13.
Article in English | MEDLINE | ID: mdl-31644275

ABSTRACT

A large amount of zeolite structures are still not synthetically available or not available in the form of aluminosilicate currently. Despite significant progress in the development of predictive concepts for zeolite synthesis, accessing some of these new materials is still challenging. One example is the IWR structure as well. Despite successful synthesis of Ge-based IWR zeolites, direct synthesis of aluminosilicate IWR zeolite is still not successful. In this report we show how a suitable organic structure directing agent (OSDA), through modeling of an OSDA/zeolite cage interaction, could access directly the aluminum-containing IWR structure (denoted as COE-6), which might allow access to new classes of materials and thus open opportunities in valuable chemical applications. The experimental results reveal that the COE-6 zeolites with a SiO2/Al2O3 ratio as low as 30 could be obtained. Very interestingly, the COE-6 zeolite has much higher hydrothermal and thermal stabilities than those of the conventional Ge-Al-IWR zeolite. In methanol-to-propylene (MTP) reaction, the COE-6 zeolite exhibits excellent selectivity for propylene, offering a potential catalyst for MTP reaction in the future.

15.
Acc Chem Res ; 51(6): 1396-1403, 2018 06 19.
Article in English | MEDLINE | ID: mdl-29738233

ABSTRACT

Zeolites have been extensively studied for years in different areas of chemical industry, such as shape selective catalysis, ion-exchange, and gas adsorption and separation. Generally, zeolites are prepared from solvothermal synthesis in the presence of a large amounts of solvents such as water and alcohols in sealed autoclaves under autogenous pressure. Water has been regarded as essential to synthesize zeolites for fast mass transfer of reactants, but it occupies a large space in autoclaves, which greatly reduces the yield of zeolite products. Furthermore, polluted wastes and relatively high pressure due to the presence of water solvent in the synthesis also leads to environmental and safety issues. Recently, inspired by great benefits of solvent-free synthesis, including the environmental concerns, energy consumption, safety, and economic cost, researchers continually challenge the rationale of the solvent and reconsider the age-old question "Do we actually need solvents at all in zeolite synthesis?" In this Account, we briefly summarize our efforts to rationally synthesize zeolites via a solvent-free route. Our research demonstrates that a series of silica, aluminosilicate, and aluminophosphate-based zeolites can be successfully prepared by mixing, grinding, and heating starting solid materials under solvent-free conditions. Combining an organotemplate-free synthesis with a solvent-free approach maximizes the advantages resulting in a more sustainable synthetic route, which avoids using toxic and costly organic templates and the formation of harmful gases by calcination of organic templates at high temperature. Furthermore, new insights into the solvent-free crystallization process of zeolites have been provided by modern techniques such as NMR and UV-Raman spectroscopy, which should be helpful in designing new zeolite structures and developing novel routes for synthesis of zeolites. The role of water and the vital intermediates during the crystallization of zeolites have been proposed and verified. In addition to a significant reduction in liquid wastes and a remarkable increase in zeolite yields, the solvent-free synthesis of zeolites exhibits more unprecedented benefits, including (i) the formation of hierarchical micro-, meso-, and macrostructures, which benefit the mass transfer in the reactions, (ii) rapid synthesis at higher temperatures, which greatly improve the space-time yields of zeolites, and (iii) construction of a novel catalytic system for encapsulation of metal nanoparticles and metal oxide particles within zeolite crystals synergistically combining the advantages of catalytic metal nanoparticles and metal oxide particles (high activity) and zeolites (shape selectivity). We believe that the concept of "solvent-free synthesis of zeolites" would open a door for deep understanding of zeolite crystallization and the design of efficient zeolitic catalysts.

16.
Angew Chem Int Ed Engl ; 58(35): 12138-12142, 2019 Aug 26.
Article in English | MEDLINE | ID: mdl-31283076

ABSTRACT

Currently, the synthesis of pure silica zeolites always requires the presence of organic structure-directing agents (OSDAs), which direct the assembly pathway and ultimately fill the pore space. A sustainable route is now reported for synthesizing pure silica zeolites in the absence of OSDAs from a combined strategy of zeolite seeding and alcohol filling, where the zeolite seeds direct crystallization of zeolite crystals from amorphous silica, while the alcohol is served as pore filling in the zeolites. Very importantly, the alcohol could be fully washed out from zeolite pores by water at room temperature, which completely avoids calcination at high temperature for removal of OSDAs in the synthesis of pure silica zeolites.

17.
Angew Chem Int Ed Engl ; 57(21): 6104-6108, 2018 05 22.
Article in English | MEDLINE | ID: mdl-29660228

ABSTRACT

Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO2 into ethanol over non-noble cobalt catalysts (CoAlOx ), presenting a significant advance for the conversion of CO2 into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO2 to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g-1 h-1 . Operando FT-IR spectroscopy revealed that the high ethanol selectivity over the CoAlOx catalyst might be due to the formation of acetate from formate by insertion of *CHx , a key intermediate in the production of ethanol by CO2 hydrogenation.

18.
J Am Chem Soc ; 138(19): 6171-6, 2016 05 18.
Article in English | MEDLINE | ID: mdl-27116300

ABSTRACT

Crystallization of AlPO4-5 with AFI structure under solvent-free conditions has been investigated. Attention was mainly focused on the characterization of the intermediate phases formed at the early stages during the crystallization. The development in the long-range ordering of the solid phases as a function of crystallization time was monitored by XRD, SEM, IR, UV-Raman, and MAS NMR techniques. Particularly, the UV-Raman spectroscopy was employed to obtain the information on the formation process of the framework. J-HMQC (27)Al/(31)P double-resonance NMR experiments were used to identify the P-O-Al bonded species in the intermediate phases. For the first time the P-O-Al bonded species in the intermediate phases can be correctly described through using this advanced NMR technique. The crystallization under solvent-free conditions appears to follow the pathway: The initial amorphous raw material is converted to an intermediate phase which has four-/six-membered ring species, then gradually transformed into crystalline AlPO4-5. This observation is not consistent with the common idea that the intermediate phase is the semicrystalline intermediates with a three-dimensional structure.

19.
Chem Soc Rev ; 44(17): 6018-34, 2015 Oct 07.
Article in English | MEDLINE | ID: mdl-26505055

ABSTRACT

The emergence of porous organic polymers (POPs) has provided great opportunities for new applications in heterogeneous catalysis owing to their unprecedented intrinsic structural features such as high surface areas, extraordinary framework stabilities and chemically adjustable compositions. In this tutorial review, representative recent developments in the POPs-based catalysts with hierarchically porous structures are presented. Various strategies for the syntheses of hierarchically porous polymers including hard-templating, soft-templating and template-free approaches and the design of catalytically active porous polymers including post-modification, co-polymerization and self-polymerization have been discussed. In addition, their catalytic properties are compared. Finally, we emphasize the importance of the synthesis of hierarchically porous polymer based heterogeneous catalysts using sustainable routes under template-free and metal-free conditions.

20.
J Am Chem Soc ; 137(15): 5204-9, 2015 Apr 22.
Article in English | MEDLINE | ID: mdl-25848868

ABSTRACT

A series of diphosphine ligand constructed porous polymers with stable and flexible frameworks have been successfully synthesized under the solvothermal conditions from polymerizing the corresponding vinyl-functionalized diphosphine monomers. These insoluble porous polymers can be swollen by a wide range of organic solvents, showing similar behavior to those of soluble analogues. Rather than just as immobilizing homogeneous catalysts, these porous polymers supported with Rh species demonstrate even better catalytic performance in the hydroformylations than the analogue homogeneous catalysts. The sample extraordinary performance could be attributed to the combination of high ligand concentration and flexible framework of the porous polymers. Meanwhile, they can be easily separated and recycled from the reaction systems without losing any activity and selectivity. This excellent catalytic performance and easy recycling heterogeneous catalyst property make them be very attractive. These diphosphine ligand constructed porous polymers may provide new platforms for the hydroformylation of olefins in the future.

SELECTION OF CITATIONS
SEARCH DETAIL