PEGylated mucus-penetrating nanocrystals for lung delivery of a new FtsZ inhibitor against Burkholderia cenocepacia infection.

C109 is a potent but poorly soluble FtsZ inhibitor displaying promising activity against Burkholderia cenocepacia, a high-risk pathogen for cystic fibrosis (CF) sufferers. To harness C109 for inhalation, we developed nanocrystal-embedded dry powders for inhalation suspension consisting in C109 nanocrystals stabilized with D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) embedded in hydroxypropyl-ß-cyclodextrin (CD). The powders could be safely re-dispersed in water for in vitro aerosolization. Owing to the presence of a PEG shell, the rod shape and the peculiar aspect ratio, C109 nanocrystals were able to diffuse through artificial CF mucus. The promising technological features were completed by encouraging in vitro/in vivo effects. The formulations displayed no toxicity towards human bronchial epithelial cells and were active against planktonic and sessile B. cenocepacia strains. The efficacy of C109 nanosuspensions in combination with piperacillin was confirmed in a Galleria mellonella infection model, strengthening their potential for combined therapy of B. cenocepacia lung infections.

Polymeric Nanoparticles for Cancer Photodynamic Therapy.

In chemotherapy a fine balance between therapeutic and toxic effects needs to be found for each patient, adapting standard combination protocols each time. Nanotherapeutics has been introduced into clinical practice for treating tumors with the aim of improving the therapeutic outcome of conventional therapies and of alleviating their toxicity and overcoming multidrug resistance. Photodynamic therapy (PDT) is a clinically approved, minimally invasive procedure emerging in cancer treatment. It involves the administration of a photosensitizer (PS) which, under light irradiation and in the presence of molecular oxygen, produces cytotoxic species. Unfortunately, most PSs lack specificity for tumor cells and are poorly soluble in aqueous media, where they can form aggregates with low photoactivity. Nanotechnological approaches in PDT (nanoPDT) can offer a valid option to deliver PSs in the body and to solve at least some of these issues. Currently, polymeric nanoparticles (NPs) are emerging as nanoPDT system because their features (size, surface properties, and release rate) can be readily manipulated by selecting appropriate materials in a vast range of possible candidates commercially available and by synthesizing novel tailor-made materials. Delivery of PSs through NPs offers a great opportunity to overcome PDT drawbacks based on the concept that a nanocarrier can drive therapeutic concentrations of PS to the tumor cells without generating any harmful effect in non-target tissues. Furthermore, carriers for nanoPDT can surmount solubility issues and the tendency of PS to aggregate, which can severely affect photophysical, chemical, and biological properties. Finally, multimodal NPs carrying different drugs/bioactive species with complementary mechanisms of cancer cell killing and incorporating an imaging agent can be developed. In the following, we describe the principles of PDT use in cancer and the pillars of rational design of nanoPDT carriers dictated by tumor and PS features. Then we illustrate the main nanoPDT systems demonstrating potential in preclinical models together with emerging concepts for their advanced design.

Large Porous Particles for Sustained Release of a Decoy Oligonucelotide and Poly(ethylenimine): Potential for Combined Therapy of Chronic Pseudomonas aeruginosa Lung Infections.

We have recently demonstrated that the specific inhibition of nuclear factor-κB by a decoy oligonucleotide (dec-ODN) delivered through inhalable large porous particles (LPP) made of poly(lactic-co-glycolic acid) (PLGA) may be highly beneficial for long-term treatment of lung inflammation. Nevertheless, besides chronic inflammation, multifunctional systems aimed to control also infection are required in chronic lung diseases, such as cystic fibrosis (CF). In this work, we tested the hypothesis that engineering PLGA-based LPP with branched poly(ethylenimine) (PEI) may improve LPP properties for pulmonary delivery of dec-ODN, with particular regard to the treatment of Pseudomonas aeruginosa lung infections. After getting insight into the role of PEI on the technological properties of PLGA-based LPP for delivery of dec-ODN, the putative synergistic effect of PEI free or PEI released from LPP on in vitro antimicrobial activity of tobramycin (Tb) and aztreonam (AZT) against P. aeruginosa was elucidated. Meanwhile, cytotoxicity studies on A549 cells were carried out. Results clearly demonstrate that the dry powders have promising aerosolization properties and afford a prolonged in vitro release of both dec-ODN and PEI. The encapsulation of PEI into LPP results in a 2-fold reduction of the minimum inhibitory concentration of AZT, while reducing the cytotoxic effect of PEI. Of note, the developed ODN/PLGA/PEI LPP persisted at lung at least for 14 days after intratracheal administration in rats where they can provide sustained and combined release of dec-ODN and PEI. dec-ODN will likely act as an anti-inflammatory drug, while PEI may enhance the therapeutic activity of inhaled antibiotics, which are commonly employed for the treatment of concomitant lung infections.

Toward Repositioning Niclosamide for Antivirulence Therapy of Pseudomonas aeruginosa Lung Infections: Development of Inhalable Formulations through Nanosuspension Technology.

Inhaled antivirulence drugs are currently considered a promising therapeutic option to treat Pseudomonas aeruginosa lung infections in cystic fibrosis (CF). We have recently shown that the anthelmintic drug niclosamide (NCL) has strong quorum sensing (QS) inhibiting activity against P. aeruginosa and could be repurposed as an antivirulence drug. In this work, we developed dry powders containing NCL nanoparticles that can be reconstituted in saline solution to produce inhalable nanosuspensions. NCL nanoparticles were produced by high-pressure homogenization (HPH) using polysorbate 20 or polysorbate 80 as stabilizers. After 20 cycles of HPH, all formulations showed similar properties in the form of needle-shape nanocrystals with a hydrodynamic diameter of approximately 450 nm and a zeta potential of -20 mV. Nanosuspensions stabilized with polysorbate 80 at 10% w/w to NCL (T80_10) showed an optimal solubility profile in simulated interstitial lung fluid. T80_10 was successfully dried into mannitol-based dry powder by spray drying. Dry powder (T80_10 DP) was reconstituted in saline solution and showed optimal in vitro aerosol performance. Both T80_10 and T80_10 DP were able to inhibit P. aeruginosa QS at NCL concentrations of 2.5-10 µM. NCL, and these formulations did not significantly affect the viability of CF bronchial epithelial cells in vitro at microbiologically active concentrations (i.e., ≤10 µM). In vivo acute toxicity studies in rats confirmed no observable toxicity of the NCL T80_10 DP formulation upon intratracheal administration at a concentration 100-fold higher than the anti-QS activity concentration. These preliminary results suggest that NCL repurposed in the form of inhalable nanosuspensions has great potential for the local treatment of P. aeruginosa lung infections as in the case of CF patients.

State-of-the-Art Review on Inhalable Lipid and Polymer Nanocarriers: Design and Development Perspectives.

Nowadays, the interest in research towards the local administration of drugs via the inhalation route is growing as it enables the direct targeting of the lung tissue, at the same time reducing systemic side effects. This is of great significance in the era of nucleic acid therapeutics and personalized medicine for the local treatment of severe lung diseases. However, the success of any inhalation therapy is driven by a delicate interplay of factors, such as the physiochemical profile of the payload, formulation, inhalation device, aerodynamic properties, and interaction with the lung fluids. The development of drug delivery systems tailored to the needs of this administration route is central to its success and to revolutionize the treatment of respiratory diseases. With this review, we aim to provide an up-to-date overview of advances in the development of nanoparticulate carriers for drug delivery to the lung tissue, with special regard concerning lipid and polymer-based nanocarriers (NCs). Starting from the biological barriers that the anatomical structure of the lung imposes, and that need to be overcome, the current strategies to achieve efficient lung delivery and the best support for the success of NCs for inhalation are highlighted.

The Questionable Quality Profile of Food Supplements: The Case of Red Yeast Rice Marketed Products.

Food supplements (FS) containing red yeast rice (RYR) are largely employed to reduce lipid levels in the blood. The main ingredient responsible for biological activity is monacolin K (MoK), a natural compound with the same chemical structure as lovastatin. Concentrated sources of substances with a nutritional or physiological effect are marketed in "dose" form as food supplements (FS). The quality profile of the "dosage form" of FS is not defined in Europe, whereas some quality criteria are provided in the United States. Here, we evaluate the quality profile of FS containing RYR marketed in Italy as tablets or capsules running two tests reported in The European Pharmacopoeia 11 Ed. and very close to those reported in the USP. The results highlighted variations in dosage form uniformity (mass and MoK content) compliant with The European Pharmacopoeia 11 Ed. specifications, whereas the time needed for disintegrating tablets was longer for 44% of the tested samples. The bioaccessibility of MoK was also investigated to obtain valuable data on the biological behaviour of the tested FS. In addition, a method for citrinin (CIT) determination was optimized and applied to real samples. None of the analyzed samples demonstrated CIT contamination (LOQ set at 6.25 ng/mL). Considering the widespread use of FS, our data suggest that greater attention should be paid by fabricants and regulatory authorities to ensure the quality profile and the safe consumption of marketed products.

Enhancing transmucosal delivery of CBD through nanoemulsion: in vitro and in vivo studies.

Cannabidiol (CBD) has gained significant attention as a complementary and alternative medicine due to its promising therapeutic properties. However, CBD faces obstacles when administered orally due to its poor solubility in water, leading to limited absorption into the bloodstream and low and variable bioavailability. Therefore, the development of innovative delivery approaches that can enhance CBD's bioavailability, facilitate administration, and promote patient adherence is crucial. We propose a new approach for buccal delivery of CBD based on a self-assembling nanoemulsion (NE) made of a mixture of surfactants (Tween 80 and Labrasol) and medium chain triglycerides (MCTs). The NE formulation showed properties suitable for buccal administration, including appropriate size, CBD content, and surface properties, and, if compared to a CBD-MCT solution, it exhibited better control of administered doses, faster dissolution in buccal medium, and enhanced stability. The CBD-NE effectively released its active load within 5 h, remained stable even when diluted in simulated buccal fluids, and could be easily administered through a commercially available spray, providing consistent and reproducible doses of NE with optimized properties. In vitro permeation studies demonstrated that the CBD-NE facilitated swift and consistent permeation through the buccal mucosa, resulting in a higher concentration in the acceptor compartment compared to CBD-MCT. Furthermore, the in vivo study in mice showed that a single buccal administration of CBD-NE led to a quicker onset of action than a CBD solution in MCT, while maintaining the same plasma levels over time and leading to typically higher plasma concentrations compared to those usually achieved through oral administration. In conclusion, our CBD-NE represents a promising alternative formulation strategy for buccal CBD administration, overcoming the challenges associated with conventional formulations such as variable bioavailability and low control of administered doses.

Local delivery of the hemostatic agent tranexamic acid in chronically anticoagulated patients.

In oral surgery, the management of patients on anticoagulant therapy is still challenging because of the risks of uncontrolled bleeding and, if the therapy is discontinued, the possibility of undesired thromboembolic complications. The use of local hemostatic agents may be a viable alternative to overcome these issues. Along these lines, the aim of this work was to evaluate the use of newly developed swelling matrices loaded with tranexanic acid in preventing postextractive bleeding in patients with no modification of oral anticoagulant therapy. The matrices are made up of cellulose and are able to fit the tridimensional postextractive alveolar cavity, thus assuring also a mechanical contribution to homeostasis. The potential of this new therapeutic approach in reducing hospitalization, removing the risk of infections, and lowering the number of hemorrhagic complications was demonstrated.

Development of a Wet-Granulated Sourdough Multiple Starter for Direct Use.

The search for sourdough starters for the direct production of baked goods with all the advantages of biological sourdough fermentation is still a crucial issue. In this study, 43 Lactic Acid Bacteria strains isolated from mature sourdoughs were evaluated for features of technological interest and tested for fermentation ability. Three microbial combinations were selected and used to produce bread. Based on GC-MS and sensory analysis, bread made by using the three combinations of strains was characterized by a more complex aroma profile with the prevalence of VOCs typical of sourdough bread. To set up the best way to keep microbial viability upon drying, the three combinations were subject to freeze-drying and wet granulation, with the latter being used for the first time for food starters' stabilization. Wet granulation ensured optimal strains' viability. Surprisingly, the height attained by mature sourdoughs when inoculated with wet granulated starters was constantly higher than the height reached by sourdoughs made with the same starters as fresh cells. The microbial combination E75-B72 exhibited the best performances and may represent a starter able to ensure sourdough bread production in 16 h of fermentation at 28 °C.

Alcohol-Based Hand Sanitizers: Does Gelling Agent Really Matter?

Hand hygiene, social distancing, and face covering are considered the first protection against Coronavirus spreading. The high demand during the COVID-19 emergency has driven a frenetic production and marketing of hand sanitizer gels. Nevertheless, the effect of the gelling agent and its amount on the effectiveness of alcohol-based hand sanitizers (ABHSs) needs to be clarified. We presented a systematic study on the effect of the characteristics and concentration of the most employed excipients on the properties and antimicrobial activity of ABHSs. Three different gelling agents, carbopol, hydroxypropylmethylcellulose (HPMC), and hydroxyethylcellulose (HEC), at four different concentrations were used to prepare ABHSs. Viscosity, spreadability, delivery from commercial dispensers, evaporation rate, rubbing time, and hand distribution of the ABHSs were then explored. Biocidal activity of selected ABHSs was evaluated in vitro on ATCC and clinical strains. The studied ABHS can be considered bioactive and comfortable. Nevertheless, the cellulose polymers and ethanol interactions led to a slight but significant reduction in the biocidal activity compared with carbopol-based formulations. Our results underline the importance of the gelling agent properties and support the choice of carbopol as one of the best thickener agents in ABHS formulations.

Boosting lung accumulation of gallium with inhalable nano-embedded microparticles for the treatment of bacterial pneumonia.

The potential of intra-venous gallium nitrate (GaN) administration against Pseudomonas aeruginosa pneumonia was recently demonstrated in mice and in cystic fibrosis (CF) patients. Likewise, the added value of direct lung delivery of Ga(III) has been shown in rats. Therefore, the design of a drug delivery system specifically engineered for Ga(III) inhalation is imperative to improve its accumulation in lungs. To this purpose, Ga(III) was efficiently encapsulated into hyaluronic acid/chitosan nanoparticles (Ga_HA/CS NPs), whose features were tuned to facilitate access to the target by overcoming mucus and biofilm surrounding bacteria. Then, to improve in vivo lung deposition, Ga_HA/CS NPs were engineered into mannitol-based NEM (Ga_Man NEM). The powders showed optimal in vitro aerosol performance, and sustained release kinetics in lung lining fluids. Moreover, good tolerability and antimicrobial properties were shown in vitro. Intratracheal insufflation of Ga_Man NEM in rats resulted in a significant improvement of Ga(III) persistence in the lungs coupled to a lower Ga(III) concentration in plasma and urine, compared to GaN solution. Noteworthy, the developed formulation significantly modifies the unfavorable Ga(III) kinetic increasing the Ga(III) to the lung and preventing Ga(III) accumulation in the kidney, key responsible for adverse effects, conclusively demonstrating the benefit of Ga_Man NEM to exploit the therapeutic effect of Ga(III) via inhalation route.

Hybrid Lipid/Polymer Nanoparticles to Tackle the Cystic Fibrosis Mucus Barrier in siRNA Delivery to the Lungs: Does PEGylation Make the Difference?

Inhaled siRNA therapy has a unique potential for treatment of severe lung diseases, such as cystic fibrosis (CF). Nevertheless, a drug delivery system tackling lung barriers is mandatory to enhance gene silencing efficacy in the airway epithelium. We recently demonstrated that lipid-polymer hybrid nanoparticles (hNPs), comprising a poly(lactic-co-glycolic) acid (PLGA) core and a lipid shell of dipalmitoyl phosphatidylcholine (DPPC), may assist the transport of the nucleic acid cargo through mucus-covered human airway epithelium. To study in depth the potential of hNPs for siRNA delivery to the lungs and to investigate the hypothesized benefit of PEGylation, here, an siRNA pool against the nuclear factor-κB (siNFκB) was encapsulated inside hNPs, endowed with a non-PEGylated (DPPC) or a PEGylated (1,2-distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol) or DSPE-PEG) lipid shell. Resulting hNPs were tested for their stability profiles and transport properties in artificial CF mucus, mucus collected from CF cells, and sputum samples from a heterogeneous and representative set of CF patients. Initial information on hNP properties governing their interaction with airway mucus was acquired by small-angle X-ray scattering (SAXS) studies in artificial and cellular CF mucus. The diffusion profiles of hNPs through CF sputa suggested a crucial role of lung colonization of the corresponding donor patient, affecting the mucin type and content of the sample. Noteworthy, PEGylation did not boost mucus penetration in complex and sticky samples, such as CF sputa from patients with polymicrobial colonization. In parallel, in vitro cell uptake studies performed on mucus-lined Calu-3 cells grown at the air-liquid interface (ALI) confirmed the improved ability of non-PEGylated hNPs to overcome mucus and cellular lung barriers. Furthermore, effective in vitro NFκB gene silencing was achieved in LPS-stimulated 16HBE14o- cells. Overall, the results highlight the potential of non-PEGylated hNPs as carriers for pulmonary delivery of siRNA for local treatment of CF lung disease. Furthermore, this study provides a detailed understanding of how distinct models may provide different information on nanoparticle interaction with the mucus barrier.

Mucoadhesive zein/beta-cyclodextrin nanoparticles for the buccal delivery of curcumin.

Herein, we have developed sprayable dispersions of mucoadhesive nanoparticles (NPs) made of zein, a hydrophobic plant-based protein, for the buccal delivery of curcumin (CUR), a poorly water-soluble polyphenol. NPs were prepared by the liquid-liquid dispersion method using an antisolvent water solution without or with beta-cyclodextrin (CD). NPs were spherical with a monomodal size distribution, a mean size around 140 nm and low polydispersity. Excellent colloidal stability of NPs was found at room temperature for up to 1 month. CUR entrapment was found to depend mainly on the zein/CUR ratio and related to the ability of CUR to set within hydrophobic pockets in the zein matrix. CD addition generated an increase of NP zeta potential up to +60 mV, indicating that positively charged amino acids are prompted to settle on the NP surface. Fluorescence emission spectroscopy indicated that CD interacted with lipophilic amino acids of zein altering interchain interactions and formation of glutamine bridge. Because of zein/CD interactions, mainly occurring at NP periphery, the slowing down of the CUR release rate was observed too. A combination of spectroscopic techniques unequivocally showed that zein NPs strongly interacted with mucin due to electrostatic interactions. Once sprayed on a porcine buccal mucosa, zein/CD NPs securely attached to the tissue resisting repeated washing steps but did not allow CUR transmucosal permeation. Overall, these results point at zein/CD NPs as a novel mucoadhesive platform for the buccal delivery of poorly water-soluble molecules to use as both a food supplement or a drug product to achieve local effects.

Zein Beta-Cyclodextrin Micropowders for Iron Bisglycinate Delivery.

Given the limited number of materials available to design delivery platforms for nutrients, the rational combination of raw materials already approved as food ingredients and their processing through nano-micro technology can offer a unique tool for innovation. Here, we propose a nano-in-micro strategy to produce powders based on the hydrophobic protein zein, useful for the oral delivery of a hydrophilic iron source (iron bisglycinate) in anaemic patients. Iron-loaded powders were prepared through a two-step strategy consisting in the formation of a zein pseudolatex followed by a spray-drying step. To extend the manipulation space for zein and entrap iron bisglycinate, ß-cyclodextrin (ßCD) was selected as helping excipient. Addition of ßCD allowed iron loading in the pseudolatex and greatly increased product yields after the drying process as compared to zein alone. Iron-loaded micro-sized powders were characterised by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectra, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to elucidate the role of ßCD as a compatibilizer for the zein-iron system. Remarkably, micropowders released only 20% of FeBIS in a simulated gastric fluid, whereas release in a simulated intestinal fluid was almost completed in 7 h. In summary, ßCD association to zein is a novel strategy to expand applications in the oral delivery of iron bisglycinate and, prospectively, to micronutrient chelates.

Antimicrobial peptide Temporin-L complexed with anionic cyclodextrins results in a potent and safe agent against sessile bacteria.

Concern over antibiotic resistance is growing, and new classes of antibiotics, particularly against Gram-negative bacteria, are needed. Antimicrobial peptides (AMPs) have been proposed as a new class of clinically useful antimicrobials. Special attention has been devoted to frog-skin temporins. In particular, temporin L (TL) is strongly active against Gram-positive, Gram-negative bacteria and yeast strains. With the aim of overcoming some of the main drawbacks preventing the widespread clinical use of this peptide, i.e. toxicity and unfavorable pharmacokinetics profile, we designed new formulations combining TL with different types of cyclodextrins (CDs). TL was associated to a panel of neutral or negatively charged, monomeric and polymeric CDs. The impact of CDs association on TL solubility, as well as the transport through bacterial alginates was assessed. The biocompatibility on human cells together with the antimicrobial and antibiofilm properties of TL/CD systems was explored.

Etodolac/cyclodextrin formulations: physicochemical characterization and in vivo pharmacological studies.

BACKGROUND: The formulation of nonsteroidal anti-inflammatory drugs with cyclodextrins (CDs) has demonstrated to be a suitable strategy to increase drug aqueous solubility, dissolution rate, and gastric tolerance. AIM: We investigated the effects of the CDs on the physicochemical and pharmacological properties of Etodolac (ET), a practically water-insoluble nonsteroidal anti-inflammatory drug, to individuate a drug formulation with optimized pharmacokinetics and pharmacodynamics. METHODS: The interactions in solution of ET with beta-CD, hydroxypropyl-beta-CD (HP-beta-CD), and gamma-CD were studied by (13)C-NMR spectroscopy and phase solubility method. Solid binary systems, prepared by physical mixing and freeze-drying, were characterized by differential scanning calorimetry, X-ray analysis and Fourier transform infrared spectroscopy, and dissolution studies. An in vivo pharmacological investigation (analgesic activity and gastric tolerance studies) was performed on freeze-dried ET/CD formulations. RESULTS: (13)C-NMR and phase solubility studies demonstrated the ability of CDs to complex with ET and increase drug solubility. ET/CD interactions at the solid state occurred at the molecular level only for freezed-dried samples. All binary systems, mainly those containing HP-beta-CD and gamma -CD, showed a significantly improved dissolution profile of ET. In vivo pharmacological studies evidenced an improvement of analgesic activity and a reduction of gastrolesivity of ET/CD-tested formulations with respect to ET alone. CONCLUSIONS: The formulation of ET with CDs demonstrates relevant pharmaceutical potential in view of decreasing dose and side effects of ET. For industrial applications, HP-beta-CD appears to be the best partner for ET, as it is less expensive than gamma-CD and gives rise to higher drug solubilization than beta-CD.

Improving in vivo conversion of oleuropein into hydroxytyrosol by oral granules containing probiotic Lactobacillus plantarum 299v and an Olea europaea standardized extract.

This study reports novel food-grade granules for co-delivery of L. plantarum 299v and a standardized extract of Olea europaea leaves (Phenolea®) as oral carrier of probiotics and hydroxytyrosol. Different granule formulations containing either L. plantarum 299v (Lac), or the olive leave extract (Phe) or their combination (Lac-Phe) have been successfully produced through wet granulation employing excipients generally regarded as safe as granulating/binding agents. L. plantarum cells withstood the manufacturing process and were stable upon storage at 4 °C for more than 6 months. In vitro dissolution studies in simulated gastro-intestinal fluids showed the capability of the granules to rapidly dissolve and deliver both olive leave phenols and living L. plantarum cells. In simulated digestion conditions, Lac and Lac-Phe granules protected L. plantarum against the harsh environment of the gastro-intestinal tract. Co-administration of Lac and Phe oral granules to healthy mice provided for higher amounts of hydroxytyrosol in urines as compared to Phe granules alone, suggesting that L. plantarum 299v boosted in vivo conversion of oleuropein to hydroxytyrosol. On the other hand, PCR-assisted profiling of the Lactobacillus population in faeces obtained from mice treated with Lac or Lac plus Phe confirmed that the probiotic arrived alive to colon and was there able to exert a sort of perturbing effect on the climax colonic microflora. Overall, these results pave the way towards the development of a nutraceutical useful for combined delivery of bioactive hydroxytyrosol and probiotics to colon site.

Hybrid Lipid/Polymer Nanoparticles for Pulmonary Delivery of siRNA: Development and Fate Upon In Vitro Deposition on the Human Epithelial Airway Barrier.

BACKGROUND: Nowadays, the downregulation of genes involved in the pathogenesis of severe lung diseases through local siRNA delivery appears an interesting therapeutic approach. In this study, we propose novel hybrid lipid-polymer nanoparticles (hNPs) consisting of poly(lactic-co-glycolic) acid (PLGA) and dipalmitoyl phosphatidylcholine (DPPC) as siRNA inhalation system. METHODS: A panel of DPPC/PLGA hNPs was prepared by emulsion/solvent diffusion and fully characterized. A combination of model siRNAs against the sodium transepithelial channel (ENaC) was entrapped in optimized hNPs comprising or not poly(ethylenimine) (PEI) as third component. siRNA-loaded hNPs were characterized for encapsulation efficiency, release kinetics, aerodynamic properties, and stability in artificial mucus (AM). The fate and cytotoxicity of hNPs upon aerosolization on a triple cell co-culture model (TCCC) mimicking human epithelial airway barrier were assessed. Finally, the effect of siRNA-loaded hNPs on ENaC protein expression at 72 hours was evaluated in A549 cells. RESULTS: Optimized muco-inert hNPs encapsulating model siRNA with high efficiency were produced. The developed hNPs displayed a hydrodynamic diameter of ∼150 nm, a low polydispersity index, a negative ζ potential close to -25 mV, and a peculiar triphasic siRNA release lasting for 5 days, which slowed down in the presence of PEI. siRNA formulations showed optimal in vitro aerosol performance after delivery with a vibrating mesh nebulizer. Furthermore, small-angle X-ray scattering analyses highlighted an excellent stability upon incubation with AM, confirming the potential of hNPs for direct aerosolization on mucus-lined airways. Studies in TCCC confirmed that fluorescent hNPs are internalized inside airway epithelial cells and do not exert any cytotoxic or acute proinflammatory effect. Finally, a prolonged inhibition of ENaC protein expression was observed in A549 cells upon treatment with siRNA-loaded hNPs. CONCLUSIONS: Results demonstrate the great potential of hNPs as carriers for pulmonary delivery of siRNA, prompting toward investigation of their therapeutic effectiveness in severe lung diseases.

Poly(ethylene oxide)/hydroxypropyl-ß-cyclodextrin films for oromucosal delivery of hydrophilic drugs.

In this study, we highlight the potential of the mucoadhesive film made from a poly(ethylene oxide)/hydroxypropyl-ß-cyclodextrin (PEO/CD) mixture in the oromucosal delivery of hydrophilic drugs, with a specific focus on dexamethasone phosphate disodium salt (Dexa). CD formed a complex with Dexa in solution and did not interact with mucin as highlighted from the spectrophotometric and spectrofluorimetric analysis. Similarly, CD and PEO did not affect mucin conformation, suggesting no direct interaction between the unstirred water layer and film components. Remarkably, PEO/CD/Dexa films dissolved more slowly than those made of PEO alone also in phosphate-buffered saline (PBS) pH 6.8 and gave a time-control on Dexa delivered dose. These combined effects resulted in a higher amount of Dexa accumulated in the mucosa, which can be highly beneficial in case of local diseases. Furthermore, Dexa amount able to diffuse through porcine buccal mucosa was lower when film contained CD, highlighting how CD can act as a modulator of drug transport also in the case of water-soluble drugs. In summary, our results demonstrate the versatility of PEO/CD films in mucosal delivery of hydrophilic corticosteroids paving the way to a novel approach in the treatment of mouth diseases.

Cyclodextrins in the production of large porous particles: development of dry powders for the sustained release of insulin to the lungs.

The aim of this work was to develop dry powders intended for insulin pulmonary delivery. To this purpose, large porous particles (LPP) made of poly(lactide-co-glycolide) (PLGA) were produced by the double emulsion-solvent evaporation technique. Hydroxypropyl-beta-cyclodextrin (HPbetaCD), also known as absorption enhancer for pulmonary protein delivery, was tested as aid excipient to optimize the aerodynamic behaviour of the microparticles. Several microsphere formulations, differing in HPbetaCD and insulin loadings, were produced and their properties compared. A contemporary release of insulin and HPbetaCD from the system can be achieved by selecting appropriate formulation conditions. HPbetaCD-containing LPP with flow properties and dimensions suitable for aerosolization and deposition in deep regions of the lung following inhalation were produced. In conclusion, the developed system turns to be of great potential for the combined delivery of the protein and the adsorption promoter in the respiratory tract.