Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 22
Filter
1.
Bioprocess Biosyst Eng ; 44(8): 1699-1710, 2021 Aug.
Article in English | MEDLINE | ID: mdl-33813652

ABSTRACT

This study reports the immobilization of two biocatalysts (e.g., cytochrome c-Cyt c-and the non-metalloenzyme formate dehydrogenase from Candida boidinii-cbFDH) on a series of mesoporous carbons with controlled pore sizes. The catalytic activity of the nanoconfined proteins was correlated with the pore size distribution of the carbon materials used as supports. The electrochemical behaviour of nanoconfined Cyt c showed direct electron transfer electroactivity in pore sizes matching tightly the protein dimension. The pseudo-peroxidase activity towards H2O2 reduction was enhanced at pH 4.0, due to the protein conformational changes. For cbFDH, the reduction of CO2 towards formic acid was evaluated for the nanoconfined protein, in the presence of nicotinamide adenine dinucleotide (NADH). The carbons displayed different cbFDH uptake capacity, governed by the dimensions of the main mesopore cavities and their accessibility through narrow pore necks. The catalytic activity of nanoconfined cbFDH was largely improved, compared to its performance in free solution. Regardless of the carbon support used, the production of formic acid was higher upon immobilization with lower nominal cbFDH:NADH ratios.


Subject(s)
Cytochromes c/metabolism , Formate Dehydrogenases/chemistry , Formates/chemistry , Hydrogen Peroxide/chemistry , NAD/metabolism , Saccharomycetales/enzymology , Adsorption , Animals , Carbon/chemistry , Carbon Dioxide/chemistry , Electrochemistry , Electrodes , Electron Transport , Horses , Hydrogen-Ion Concentration , Kinetics , Linear Models , Porosity , Time Factors
2.
Molecules ; 24(11)2019 May 28.
Article in English | MEDLINE | ID: mdl-31141906

ABSTRACT

Herein, the electrochemical reduction of CO2 to formate on carbon-supported bismuth nanoparticles is reported. Carbon-supported Bi nanoparticles (about 10 nm in size) were synthesized using a simple, fast and scalable approach performed under room conditions. The so-prepared Bi electrocatalyst was characterized by different physicochemical techniques, including transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction and subsequently air-brushed on a carbon paper to prepare electrodes. These electrodes were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and also by cyclic voltammetry. Finally, CO2 electroreduction electrolyses were performed at different electrode potentials for 3 h. At the optimal electrode potential (-1.6 V vs AgCl/Ag), the concentration of formate was about 77 mM with a faradaic efficiency of 93 ± 2.5%. A 100% faradaic efficiency was found at a lower potential (-1.5 V vs AgCl/Ag) with a formate concentration of about 55 mM. In terms of stability, we observed that after about 70 h (in 3 h electrolysis experiments at different potentials), the electrode deactivates due to the gradual loss of metal as shown by SEM/EDX analyses of the deactivated electrodes.


Subject(s)
Bismuth/chemistry , Carbon Dioxide/chemistry , Carbon/chemistry , Electrochemical Techniques/methods , Formates/chemistry , Nanoparticles/chemistry , Electrodes , Nanoparticles/ultrastructure , Particle Size
3.
Phys Chem Chem Phys ; 20(28): 19160-19167, 2018 Jul 18.
Article in English | MEDLINE | ID: mdl-29978164

ABSTRACT

The number of publications devoted to studying electrochemical reactions in room temperature ionic liquids (RTILs) is constantly growing, but very few of them have been devoted to defining proper experimental conditions to obtain reproducible electrochemical results. In this work, we demonstrate that the combination of a proper RTIL purification treatment and a filtered Ar gas stream allow us to obtain featureless voltammograms in [C4mim][BF4], [C4mim][NTf2], and [C4m2im][NTf2], which otherwise present signals associated with different types of impurities such as water and some minor electroactive impurities acquired during the RTIL synthesis process. Moreover, we demonstrate that bubbling Ar, or another inert gas, through the electrolyte in order to purge O2 dissolved in RTILs is one of the major sources of water and O2 impurities incorporated in RTILs within the electrochemical cell. To overcome this source of water uptake, we have incorporated a gas stream purification filter before the gas reaches the RTIL in the electrochemical cell. To illustrate the effect of these impurities in relevant electrocatalytic studies, we study the electrocatalytic reduction of CO2 on Pt nanoparticles and the key role of an appropiate filter when the CO2 gas stream is bubbled within imidazolium based RTILs. Our cyclic voltammetric studies point out that CO2 electroreduction on Pt nanoparticles only presents activity in [C4mim][NTf2] and [C4m2im][NTf2], thus suggesting that the C-2 position on the imidazolium ring is not the key position in CO2 electrochemical reduction. In contrast, the same Pt nanoparticles are inactive towards CO2 electroreduction in [C4mim][BF4], which is a more hydrophilic RTIL.

4.
Beilstein J Org Chem ; 14: 537-546, 2018.
Article in English | MEDLINE | ID: mdl-29623115

ABSTRACT

The electrocatalytic hydrogenation of benzophenone was performed at room temperature and atmospheric pressure using a polymer electrolyte membrane electrochemical reactor (PEMER). Palladium (Pd) nanoparticles were synthesised and supported on a carbonaceous matrix (Pd/C) with a 28 wt % of Pd with respect to carbon material. Pd/C was characterised by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Cathodes were prepared using Pd electrocatalytic loadings (LPd) of 0.2 and 0.02 mg cm-2. The anode consisted of hydrogen gas diffusion for the electrooxidation of hydrogen gas, and a 117 Nafion exchange membrane acted as a cationic polymer electrolyte membrane. Benzophenone solution was electrochemically hydrogenated in EtOH/water (90/10 v/v) plus 0.1 M H2SO4. Current densities of 10, 15 and 20 mA cm-2 were analysed for the preparative electrochemical hydrogenation of benzophenone and such results led to the highest fractional conversion (XR) of around 30% and a selectivity over 90% for the synthesis of diphenylmethanol upon the lowest current density. With regards to an increase by ten times the Pd electrocatalytic loading the electrocatalytic hydrogenation led neither to an increase in fractional conversion nor to a change in selectivity.

5.
J Environ Manage ; 183: 306-313, 2016 Dec 01.
Article in English | MEDLINE | ID: mdl-27604754

ABSTRACT

The statistical Response Surface Methodology (RSM) is applied to investigate the effect of different parameters (current density, j, NaCl concentration, [NaCl], pH, and temperature, θ) and their interactions on the electrochemical degradation of the Acid Green (AG) 28 dye using a Ti/ß-PbO2 or Ti-Pt/ß-PbO2 anode in a filter-press reactor. LC/MS is employed to identify intermediate compounds. For both anodes, the best experimental conditions are j = 50 mA cm(-2), [NaCl] = 1.5 g L(-1), pH = 5, and θ = 25 °C. After 3 h of electrolysis, a dye solution treated under these conditions presents the following parameters: electric charge per unit volume of the electrolyzed solution required for 90% decolorization (Q(90)) of 0.34-0.37 A h L(-1), %COD removal of ∼100%, specific energy consumption of 18-20 kW h m(-3), and %TOC removal of 32-33%. No loss of the ß-PbO2 film is observed during all the experiments. The ß-PbO2 films present excellent stability for solutions with pH ≥ 5 ([Pb(2+)] < 0.5 mg L(-1)). Chloroform is the only volatile organic halo compound present in the treated solution under those optimized conditions. Hydroxylated anthraquinone derivatives, aromatic chloramines, and naphthoquinones are formed during the electrolyses. The Ti/ß-PbO2 and Ti-Pt/ß-PbO2 anodes show significantly better performance than a commercial DSA anode for the electrochemical degradation of the AG 28 dye. The Ti/ß-PbO2 anode, prepared as described in this work, is an excellent option for the treatment of textile effluents because of its low cost of fabrication and good performance.


Subject(s)
Lead/chemistry , Lissamine Green Dyes/chemistry , Oxides/chemistry , Titanium/chemistry , Electrochemistry , Electrodes , Electrolysis , Hydrogen-Ion Concentration , Industrial Waste/analysis , Textiles
6.
Phys Chem Chem Phys ; 17(37): 23909-16, 2015 Oct 07.
Article in English | MEDLINE | ID: mdl-26307480

ABSTRACT

The direct CO2 electrochemical reduction on model platinum single crystal electrodes Pt(hkl) is studied in [C2mim(+)][NTf2(-)], a suitable room temperature ionic liquid (RTIL) medium due to its moderate viscosity, high CO2 solubility and conductivity. Single crystal electrodes represent the most convenient type of surface structured electrodes for studying the impact of RTIL ion adsorption on relevant electrocatalytic reactions, such as surface sensitive electrochemical CO2 reduction. We propose here based on cyclic voltammetry and in situ electrolysis measurements, for the first time, the formation of a stable adduct [C2mimH-CO2(-)] by a radical-radical coupling after the simultaneous reduction of CO2 and [C2mim(+)]. It means between the CO2 radical anion and the radical formed from the reduction of the cation [C2mim(+)] before forming the corresponding electrogenerated carbene. This is confirmed by the voltammetric study of a model imidazolium-2-carboxylate compound formed following the carbene pathway. The formation of that stable adduct [C2mimH-CO2(-)] blocks CO2 reduction after a single electron transfer and inhibits CO2 and imidazolium dimerization reactions. However, the electrochemical reduction of CO2 under those conditions provokes the electrochemical cathodic degradation of the imidazolium based RTIL. This important limitation in CO2 recycling by direct electrochemical reduction is overcome by adding a strong acid, [H(+)][NTf2(-)], into solution. Then, protons become preferentially adsorbed on the electrode surface by displacing the imidazolium cations and inhibiting their electrochemical reduction. This fact allows the surface sensitive electro-synthesis of HCOOH from CO2 reduction in [C2mim(+)][NTf2(-)], with Pt(110) being the most active electrode studied.


Subject(s)
Carbon Dioxide/chemistry , Electrochemical Techniques , Imidazoles/chemistry , Ionic Liquids/chemistry , Platinum/chemistry , Electrodes , Molecular Structure , Oxidation-Reduction , Surface Properties
7.
Analyst ; 139(6): 1442-8, 2014 Mar 21.
Article in English | MEDLINE | ID: mdl-24492631

ABSTRACT

The direct electron transfer of cytochrome c has been studied at screen-printed graphite macroelectrodes without recourse to mediators or the need for any electrode pre-treatment as is commonly employed within the literature. A wide range of pH values from 2.0 to 11.0 have been explored upon the electrochemical response of cytochrome c and different voltammetric signatures have been observed. The direct electron transfer of the alkaline transition of cytochrome c was found impeded within alkaline media leading to either an irreversible redox process or even no voltammetric responses. In acidic aqueous media the electrochemical process is observed to undergo a mixed diffusion and adsorption controlled process rather than a purely diffusional process of the native conformation as observed at pH 7.0. Interestingly, at pH 3.5 a new conformational state is revealed in cooperation with the native conformation. The immobilization of the protein was satisfactorily obtained using a simple method by cycling the protein at specific solution pH values allowing amperometric responses to be obtained and gives rise to useful pseudo-peroxidase activity for sensing H2O2. Apparent Michaelis-Menten constant values (Km) were calculated via the Lineweaver-Burk method with deduced values of 25 ± 4, 98 ± 12 and 230 ± 30 mM, respectively for pH values of 2.0, 3.0 and 7.0. Such work is important for those utilising cytochrome c in bio-electrochemical and related applications.


Subject(s)
Cytochromes c/chemistry , Enzymes, Immobilized/chemistry , Graphite/chemistry , Hydrogen Peroxide/analysis , Peroxidases/metabolism , Animals , Biosensing Techniques , Cytochromes c/metabolism , Electrochemical Techniques , Electron Transport , Enzymes, Immobilized/metabolism , Horses , Hydrogen Peroxide/metabolism , Hydrogen-Ion Concentration , Models, Molecular , Protein Conformation
8.
Sci Total Environ ; 926: 172060, 2024 May 20.
Article in English | MEDLINE | ID: mdl-38552986

ABSTRACT

This research addresses the issues related with treatment and valorization of brines and nitrate decontamination of surface and ground waters. The objective was to approximate to zero liquid discharge (ZLD) minimizing the environmental impact of brines of an electrodialysis reversal water treatment plant (EDRWTP) as an example. The innovative in flow process was developed from lab to pre-industrial scale and joined several main concepts: ion-exchange equilibrium for softening or demineralization of brines; reversed osmosis to recover suitable water and to enrich the waste in nitrate for efficient electrochemical reduction of NO3- to N2; valorization of subproducts by direct use or by precipitation; and assessment of the whole process by measuring in-line several parameters. The achieved softening was around 98 % and the recovered water from this current by reversed osmosis was 75 %. The brine of this step (25 %) contained around 1500 mg/L of nitrate and it was treated by electrochemical reduction with a Bi/Sn cathode providing a gas current of 60 % of initial nitrate reduced to N2, O2, H2O, NH3 and at least 97 % of H2. The aqueous current contained around 40 % of initial nitrate as ammonium and nitrite lower than 50 and 5 mg/L, respectively. Hypochlorite was added to this last current for oxidizing ammonium and nitrite to N2 and nitrate, respectively, being nitrate and ammonium lower than 50 and 5 mg/L, respectively. After the obtained water was demineralized and conducted to the EDRWTP inlet. The recovery of insoluble salts as calcium carbonate, reuse of saline solutions for the regeneration of process resins and the potential use of hydrogen generated as a by-product during the electrochemical reduction are other possible utilities.

9.
ACS Appl Mater Interfaces ; 16(9): 11552-11560, 2024 Mar 06.
Article in English | MEDLINE | ID: mdl-38408369

ABSTRACT

Bismuth is a catalyst material that selectively produces formate during the electrochemical reduction of CO2. While different synthesis strategies have been employed to create electrocatalysts with better performance, the restructuring of bismuth precatalysts during the reaction has also been previously reported. The mechanism behind the change has, however, remained unclear. Here, we show that Bi2O3 nanoparticles supported on Vulcan carbon intrinsically transform into stellated nanosheet aggregates upon exposure to an electrolyte. Liquid cell transmission electron microscopy observations first revealed the gradual restructuring of the nanoparticles into nanosheets in the presence of 0.1 M KHCO3 without an applied potential. Our experiments also associated the restructuring with solubility of bismuth in the electrolyte. While the consequent agglomerates were stable under moderate negative potentials (-0.3 VRHE), they dissolved over time at larger negative potentials (-0.4 and -0.5 VRHE). Operando Raman spectra collected during the reaction showed that under an applied potential, the oxide particles reduced to metallic bismuth, thereby confirming the metal as the working phase for producing formate. These results inform us about the working morphology of these electrocatalysts and their formation and degradation mechanisms.

10.
J Mater Chem A Mater ; 12(18): 10956-10964, 2024 May 08.
Article in English | MEDLINE | ID: mdl-38725524

ABSTRACT

The combination of compositional versatility and topological diversity for the integration of electroactive species into high-porosity molecular architectures is perhaps one of the main appeals of metal-organic frameworks (MOFs) in the field of electrocatalysis. This premise has attracted much interest in recent years, and the results generated have also revealed one of the main limitations of molecular materials in this context: low stability under electrocatalytic conditions. Using zirconium MOFs as a starting point, in this work, we use this stability as a variable to discriminate between the most suitable electrocatalytic reaction and specific topologies within this family. Our results revealed that the PCN-224 family is particularly suitable for the electroreduction of molecular nitrogen for the formation of ammonia with faradaic efficiencies above 30% in the presence of Ni2+ sites, an activity that improves most of the catalysts described. We also introduce the fluorination of porphyrin at the meso position as a good alternative to improve both the activity and stability of this material under electrocatalytic conditions.

11.
Arch Biochem Biophys ; 529(1): 26-33, 2013 Jan 01.
Article in English | MEDLINE | ID: mdl-23200748

ABSTRACT

Nitration in proteins is a physiologically relevant process and the formation of 3-nitrotyrosine was first proposed as an in vivo marker of the production of reactive nitrogen species in oxidative stress. No studies have been published on structural changes associated with nitration of myoglobin. To address this deficiency the electrochemical nitration of equine skeletal muscle (Mb) at amino acid tyrosine 103 has been investigated for the evaluation and characterization of structural and thermal stability changes. Y103 in Mb is one of the most exposed tyrosine residues and it is also close to the heme group. Effects of Y103 nitration on the secondary and tertiary structure of Y103 have been studied by UV-Vis, circular dichroism, fluorescence and NMR spectroscopy and by electrochemical studies. At physiological pH, subtle changes were observed involving slight loosening of the tertiary structure and conformational exchange processes. Thermal stability of the nitrated protein was found to be reduced by 5 °C for the nitrated Mb compared with the native Mb at physiological pH. Altogether, NMR data indicates that nitrated Mb has a very similar tertiary structure to that of native Mb, although with a slightly open conformation.


Subject(s)
Heme/chemistry , Muscle, Skeletal/chemistry , Myoglobin/chemistry , Tyrosine/analogs & derivatives , Tyrosine/chemistry , Animals , Circular Dichroism , Electrochemical Techniques , Horses , Humans , Hydrogen-Ion Concentration , Kinetics , Models, Molecular , Myoglobin/metabolism , Nuclear Magnetic Resonance, Biomolecular , Protein Stability , Protein Structure, Secondary , Protein Structure, Tertiary , Tyrosine/metabolism
12.
Sci Total Environ ; 900: 165796, 2023 Nov 20.
Article in English | MEDLINE | ID: mdl-37495123

ABSTRACT

Biofouling of different artificial substrates was studied to determine the differences in biofouling assemblages among different substrates. However, studies on biofouling on natural substrates like electrolytic carbonated ones are lacking. These substrates have a great potential for coral reef restoration in tropical areas and for biofilter construction. Thus, this study was developed to examine the colonization of sessile macrofouling in the port of Alicante (SE Spain, Western Mediterranean) on two types of substrates: electrolytic carbonated and bare steel (as control) over three months of immersion (October 2019-January 2020). The community diversity was studied through different biotic parameters and abundance of assemblages, and preference of organisms according to their status and functional group (active filter feeders). Univariate and multivariate analyses (PERMANOVA and SIMPER) were also applied to examine the differences between carbonate and control substrates. The carbonated substrate had a more structured community and higher abundance, recruitment, and diversity indexes than the bare steel. Moreover, filter feeders (Porifera, Bivalvia, and Ascidiacea) were more abundant, and most of them only appeared in the carbonated substrate. These results show the potential of carbonated structures as biofilters.


Subject(s)
Biofouling , Bivalvia , Animals , Coral Reefs , Carbonates , Steel
13.
Chemosphere ; 291(Pt 3): 133117, 2022 Mar.
Article in English | MEDLINE | ID: mdl-34861253

ABSTRACT

The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO2 to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (ß-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor. Preparative electrosynthesis of FA carried out on biocathodes of relatively large dimensions (ca. 3 cm × 2 cm) confirmed the higher production rate of FA for the immobilized enzyme. Furthermore, the incorporation of a Nafion binder in the biocathodes did not modify the immobilization extent of the CbFDH in the carbon support. Coulombic efficiencies close to 46% were obtained for the electrosynthesis carried out at -0.8 V for the biocathodes prepared using the lowest Nafion binder content and the co-immobilized enzyme and rhodium redox mediator. Although these values may yet be improved, they confirm the feasibility of these biocathodes in larger scales (6 cm2) beyond most common electrode dimensions reported in the literature (ca. a few mm2).


Subject(s)
Formate Dehydrogenases , Nanopores , Carbon , Carbon Dioxide , Formates , Saccharomycetales
14.
Analyst ; 136(10): 2146-50, 2011 May 21.
Article in English | MEDLINE | ID: mdl-21461416

ABSTRACT

We report the direct electrochemistry of cytochrome c at screen printed graphite electrodes which exhibits quasi-reversible voltammetric responses without the need for any chemical or electrochemical pre-treatment, use of mediators or nanomaterials. Through voltammetric studies and X-ray photoelectron spectroscopy (XPS) it is shown that carbonyl and carboxylic surface oxygenated species likely residing at edge plane like- sites/defects of the graphite comprising the screen printed electrodes are responsible for the favourable interaction of the cytochrome c with that of the screen printed electrochemical sensing platform.


Subject(s)
Cytochromes c/chemistry , Electrochemical Techniques/methods , Graphite/chemistry , Cytochromes c/metabolism , Electrodes , Electron Transport , Photoelectron Spectroscopy
15.
J Am Chem Soc ; 132(16): 5622-4, 2010 Apr 28.
Article in English | MEDLINE | ID: mdl-20359217

ABSTRACT

The structure sensitive catalytic activity for oxygen reduction reaction (ORR) on shape-controlled Pt nanoparticles (NPs) is directly imaged using scanning electrochemical microscopy (SECM). We synthesize and compare four types of Pt NPs: spherical, cubic, hexagonal, and tetrahedral-octahedral. Our SECM images show the hexagonal Pt NPs displaying the highest activity for ORR in two acid electrolytes. Meanwhile, cubic and tetrahedral-octahedral NPs drastically change their activity depending on specific adsorption of the different anions in solution. The NPs morphology produces predominant crystallographic planes at the surface of these shape-controlled Pt NPs, which are responsible for their different catalytic activity. Our results translate the studies on Pt single crystal electrodes present in the literature into Pt NPs that are useful as a catalyst in real fuel cells.

16.
J Hazard Mater ; 153(1-2): 252-60, 2008 May 01.
Article in English | MEDLINE | ID: mdl-17904737

ABSTRACT

A comparative study on the electrooxidation of phenol in H(2)SO(4) medium using pure PbO(2) or F-, Co- and Co,F-doped PbO(2) electrodes in filter-press cells was carried out. The oxide films were obtained by galvanostatic electrodeposition using an electrolytic bath containing sodium lauryl sulfate as additive and Pb(2+), F(-), Co(2+) or Co(2+)+F(-), under magnetic stirring (to obtain 4-cm(2) electrodes) or ultrasound waves (to obtain 63-cm(2) electrodes). The best results were attained with PbO(2) electrodes doped with a low-Co content (1mM Co(2+) in the electrolytic bath) along with F(-): the chemical oxygen demand (COD) and the total organic carbon content (TOC) of the simulated wastewaters were removed by about 75% and 50%, respectively. When pure PbO(2) electrodes were used, the COD and TOC removals were about 60% and 45%, respectively. For the smaller electrodes, an average current efficiency (ACE) and an energy consumption (EC) of about 16% and 70 kWh kg(COD)(-1), respectively, were obtained. For the larger electrodes, the ACE and EC values were about 18% and 105 kWh kg(COD)(-1), respectively. Stability tests of the electrodes showed that they are suitable for use in the electrochemical treatment of phenol wastewaters.


Subject(s)
Cobalt/chemistry , Fluorine/chemistry , Lead/chemistry , Oxides/chemistry , Phenols/chemistry , Waste Disposal, Fluid/methods , Water Pollutants, Chemical/chemistry , Water Purification/methods , Electrochemistry , Electrodes , Oxidation-Reduction
17.
ACS Appl Mater Interfaces ; 10(48): 41608-41617, 2018 Dec 05.
Article in English | MEDLINE | ID: mdl-30404443

ABSTRACT

The development of green and scalable syntheses for the preparation of size- and shape-controlled metal nanocrystals is of high interest in many areas, including catalysis, electrocatalysis, nanomedicine, and electronics. In this work, a new synthetic approach based on the synergistic action of physical parameters and reagents produces size-tunable octahedral Pt nanocrystals, without the use of catalyst-poisoning reagents and/or difficult-to-remove coatings. The synthesis requires sodium citrate, ascorbic acid, and fine control of the reduction rate in aqueous environment. Pt octahedral nanocrystals with particle size as low as 7 nm and highly developed {111} facets have been achieved, as demonstrated by transmission electron microscopy, X-ray diffraction, and electrochemical methods. The absence of sticky molecules together with the high quality of the surface makes these nanocrystals ideal candidates in electrocatalysis. Notably, 7 nm bismuth-decorated octahedral nanocrystals exhibit superior performance for the electrooxidation of formic acid in terms of both specific and mass activities.

18.
Chemosphere ; 66(11): 2035-43, 2007 Feb.
Article in English | MEDLINE | ID: mdl-17140626

ABSTRACT

The electrochemical performance of pure Ti-Pt/beta-PbO2 electrodes, or doped with Fe and F (together or separately), in the oxidation of simulated wastewaters containing the Blue Reactive 19 dye (BR-19), using a filter-press reactor, was investigated and then compared with that of a boron-doped diamond electrode supported on a niobium substrate (Nb/BDD). The electrooxidation of the dye simulated wastewater (volume of 0.1 l, with a BR-19 initial concentration of 25 mg l(-1)) was carried out under the following conditions: current density of 50 mA cm(-2), volume flow rate of 2.4 l h(-1), temperature of 25 degrees C and electrode area of 5 cm2. The performances of the electrodes in the dye decolorization were quite similar, achieving 100% decolorization, and in some cases 90% decolorization was achieved by applying only ca. 0.3 A h l(-1) (8 min of electrolysis). The reduction of the simulated wastewater organic load, monitored by its total organic carbon content (TOC), was greater for the Ti-Pt/beta-PbO2-Fe,F electrode obtained from an electrodeposition bath containing 1 mM Fe3+ and 30 mM F-. In this case, after 2 h of electrolysis the obtained TOC reduction was 95%, while for the pure beta-PbO2 and the Nb/BDD electrodes the reductions were 84% and 82%, respectively.


Subject(s)
Coloring Agents/chemistry , Electrochemistry/methods , Waste Disposal, Fluid/methods , Water Pollutants, Chemical/chemistry , Electrodes , Fluorine , Iron , Lead , Molecular Structure , Oxidation-Reduction , Oxides , Platinum , Titanium
19.
Biosens Bioelectron ; 77: 1168-74, 2016 Mar 15.
Article in English | MEDLINE | ID: mdl-26579934

ABSTRACT

l-lactate is an essential metabolite present in embryonic cell culture. Changes of this important metabolite during the growth of human embryo reflect the quality and viability of the embryo. In this study, we report a sensitive, stable, and easily manufactured electrochemical biosensor for the detection of lactate within embryonic cell cultures media. Screen-printed disposable electrodes are used as electrochemical sensing platforms for the miniaturization of the lactate biosensor. Chitosan/multi walled carbon nanotubes composite have been employed for the enzymatic immobilization of the lactate oxidase enzyme. This novel electrochemical lactate biosensor analytical efficacy is explored towards the sensing of lactate in model (buffer) solutions and is found to exhibit a linear response towards lactate over the concentration range of 30.4 and 243.9 µM in phosphate buffer solution, with a corresponding limit of detection (based on 3-sigma) of 22.6 µM and exhibits a sensitivity of 3417 ± 131 µAM(-1) according to the reproducibility study. These novel electrochemical lactate biosensors exhibit a high reproducibility, with a relative standard deviation of less than 3.8% and an enzymatic response over 82% after 5 months stored at 4 °C. Furthermore, high performance liquid chromatography technique has been utilized to independently validate the electrochemical lactate biosensor for the determination of lactate in a commercial embryonic cell culture medium providing excellent agreement between the two analytical protocols.


Subject(s)
Biosensing Techniques , Chitosan/chemistry , Embryonic Stem Cells/metabolism , Lactic Acid/metabolism , Mixed Function Oxygenases/chemistry , Nanotubes, Carbon/chemistry , Cells, Cultured , Conductometry/instrumentation , Electric Conductivity , Enzymes, Immobilized/chemistry , Equipment Design , Equipment Failure Analysis , Graphite/chemistry , Humans , Lactic Acid/chemistry , Nanotubes, Carbon/ultrastructure , Photography/methods
20.
J Phys Chem B ; 109(26): 12914-9, 2005 Jul 07.
Article in English | MEDLINE | ID: mdl-16852603

ABSTRACT

The oxidation of ammonia on platinum surfaces is a structure sensitive reaction that takes place almost exclusively on Pt(100) sites. This report shows how dependent the activity is on different arrangements of (100) sites of platinum. The effect of two-dimensional domains has been addressed by using stepped surfaces having terraces with (100) geometry, either with (111) and (110) steps. The results were compared with those obtained from stepped surfaces having terraces with (111) or (110) symmetry and monatomic (100) steps, thus representing monodimensional (100) domains. The observed behavior confirms the extreme sensitivity of the reaction to the different arrangement of this type of square sites.

SELECTION OF CITATIONS
SEARCH DETAIL