Production and characterisation of a marine Halomonas surface-active exopolymer.

During screening for novel emulsifiers and surfactants, a marine gammaproteobacterium, Halomonas sp. MCTG39a, was isolated and selected for its production of an extracellular emulsifying agent, P39a. This polymer was produced by the new isolate during growth in a modified Zobell's 2216 medium amended with 1% glucose, and was extractable by cold ethanol precipitation. Chemical, chromatographic and nuclear magnetic resonance spectroscopic analysis confirmed P39a to be a high-molecular-weight (~ 261,000 g/mol) glycoprotein composed of carbohydrate (17.2%) and protein (36.4%). The polymer exhibited high emulsifying activities against a range of oil substrates that included straight-chain aliphatics, mono- and alkyl- aromatics and cycloparaffins. In general, higher emulsification values were measured under low (0.1 M PBS) compared to high (synthetic seawater) ionic strength conditions, indicating that low ionic strength is more favourable for emulsification by the P39a polymer. However, as observed with other bacterial emulsifying agents, the polymer emulsified some aromatic hydrocarbon species, as well as refined and crude oils, more effectively under high ionic strength conditions, which we posit could be due to steric adsorption to these substrates as may be conferred by the protein fraction of the polymer. Furthermore, the polymer effected a positive influence on the degradation of phenanthrene by other marine bacteria, such as the specialist PAH-degrader Polycyclovorans algicola. Collectively, based on the ability of this Halomonas high-molecular-weight glycoprotein to emulsify a range of pure hydrocarbon species, as well as refined and crude oils, it shows promise for the bioremediation of contaminated sites.

Advances on Bioactive Polysaccharides from Medicinal Plants.

In recent decades, the polysaccharides from the medicinal plants have attracted a lot of attention due to their significant bioactivities, such as anti-tumor activity, antioxidant activity, anticoagulant activity, antidiabetic activity, radioprotection effect, anti-viral activity, hypolipidemic and immunomodulatory activities, which make them suitable for medicinal applications. Previous studies have also shown that medicinal plant polysaccharides are non-toxic and show no side effects. Based on these encouraging observations, most researches have been focusing on the isolation and identification of polysaccharides, as well as their bioactivities. A large number of bioactive polysaccharides with different structural features and biological effects from medicinal plants have been purified and characterized. This review provides a comprehensive summary of the most recent developments in physiochemical, structural features and biological activities of bioactive polysaccharides from a number of important medicinal plants, such as polysaccharides from Astragalus membranaceus, Dendrobium plants, Bupleurum, Cactus fruits, Acanthopanax senticosus, Angelica sinensis (Oliv.) Diels, Aloe barbadensis Miller, and Dimocarpus longan Lour. Moreover, the paper has also been focused on the applications of bioactive polysaccharides for medicinal applications. Recent studies have provided evidence that polysaccharides from medicinal plants can play a vital role in bioactivities. The contents and data will serve as a useful reference material for further investigation, production, and application of these polysaccharides in functional foods and therapeutic agents.

Impact of health claims in prebiotic-enriched breads on purchase intent, emotional response and product liking.

The impact of health claims on purchase intent, emotional response and liking has never been previously reported. In this study, prebiotic-enriched bread was used as a model functional food. Purchase intent, emotional response and liking were investigated in three phases: (1) focus groups were used to gauge consumer perception of health claims and functional foods, (2) the impact of health claims on purchase intent and emotional responses were measured using an online survey (n = 122) and (3) hedonic ratings on bread rolls presented with or without any associated claims were obtained (n = 100). A cluster analysis of the purchase intent data identified two clusters of consumers who were either receptive or non-receptive to health claims. Receptive and non-receptive consumers significantly differed in the emotions they reported with respect to the claims. The hedonic ratings did not significantly differ between the breads tasted with or without health claims.

Characterization of the surface-active exopolysaccharide produced by Halomonas sp TGOS-10: Understanding its role in the formation of marine oil snow.

In this study, we characterize the exopolymer produced by Halomonas sp. strain TGOS-10 -one of the organisms found enriched in sea surface oil slicks during the Deepwater Horizon oil spill. The polymer was produced during the early stationary phase of growth in Zobell's 2216 marine medium amended with glucose. Chemical and proton NMR analysis showed it to be a relatively monodisperse, high-molecular-mass (6,440,000 g/mol) glycoprotein composed largely of protein (46.6% of total dry weight of polymer). The monosaccharide composition of the polymer is typical to that of other marine bacterial exopolymers which are generally rich in hexoses, with the notable exception that it contained mannose (commonly found in yeast) as a major monosaccharide. The polymer was found to act as an oil dispersant based on its ability to effectively emulsify pure and complex oils into stable oil emulsions-a function we suspect to be conferred by the high protein content and high ratio of total hydrophobic nonpolar to polar amino acids (52.7:11.2) of the polymer. The polymer's chemical composition, which is akin to that of other marine exopolymers also having a high protein-to-carbohydrate (P/C) content, and which have been shown to effect the rapid and non-ionic aggregation of marine gels, appears indicative of effecting marine oil snow (MOS) formation. We previously reported the strain capable of utilising aromatic hydrocarbons when supplied as single carbon sources. However, here we did not detect biodegradation of these chemicals within a complex (surrogate Macondo) oil, suggesting that the observed enrichment of this organism during the Deepwater Horizon spill may be explained by factors related to substrate availability and competition within the complex and dynamic microbial communities that were continuously evolving during that spill.

Monitoring the stability of heparin: NMR evidence for the rearrangement of sulfated iduronate in phosphate buffer.

Heparin, a major anticoagulant drug, comprises a complex mixture of motifs. Heparin is isolated from natural sources while being subjected to a variety of conditions but the detailed effects of these on heparin structure have not been studied in depth. Therefore, the result of exposing heparin to a range of buffered environments, ranging pH values from 7 to 12, and temperatures of 40, 60 and 80 °C were examined. There was no evidence of significant N-desulfation or 6-O-desulfation in glucosamine residues, nor of chain scission, however, stereochemical re-arrangement of α-L-iduronate 2-O-sulfate to α-L-galacturonate residues occurred in 0.1 M phosphate buffer at pH 12/80 °C. The results confirm the relative stability of heparin in environments like those during extraction and purification processes; on the other hand, the sensitivity of heparin to pH 12 in buffered solution at high temperature is highlighted, providing an important insight for heparin manufacturers.

Extended Fujita approach to the molecular weight distribution of polysaccharides and other polymeric systems.

In 1962 H. Fujita (H. Fujita, Mathematical Theory of Sedimentation Analysis, Academic Press, New York, 1962) examined the possibility of transforming a quasi-continuous distribution g(s) of sedimentation coefficient s into a distribution f(M) of molecular weight M for linear polymers using the relation f(M)=g(s)·(ds/dM) and showed that this could be done if information about the relation between s and M is available from other sources. Fujita provided the transformation based on the scaling relation s=κ(s)M(0.5), where κ(s) is taken as a constant for that particular polymer and the exponent 0.5 essentially corresponds to a randomly coiled polymer under ideal conditions. This method has been successfully applied to mucus glycoproteins (S.E. Harding, Adv. Carbohyd. Chem. Biochem. 47 (1989) 345-381). We now describe an extension of the method to general conformation types via the scaling relation s=κM(b), where b=0.4-0.5 for a coil, ∼0.15-0.2 for a rod and ∼0.67 for a sphere. We give examples of distributions f(M) versus M obtained for polysaccharides from SEDFIT derived least squares g(s) versus s profiles (P. Schuck, Biophys. J. 78 (2000) 1606-1619) and the analytical derivative for ds/dM performed with Microcal ORIGIN. We also describe a more direct route from a direct numerical solution of the integral equation describing the molecular weight distribution problem. Both routes give identical distributions although the latter offers the advantage of being incorporated completely within SEDFIT. The method currently assumes that solutions behave ideally: sedimentation velocity has the major advantage over sedimentation equilibrium in that concentrations less than 0.2mg/ml can be employed, and for many systems non-ideality effects can be reasonably ignored. For large, non-globular polymer systems, diffusive contributions are also likely to be small.

Order and disorder in the domain organization of the plasmid partition protein KorB.

The plasmid partition protein KorB has a dual role: it is essential for the correct segregation of the low copy number broad host range RK2 plasmid while also being an important regulator of transcription. KorB belongs to the ParB family of proteins, and partitioning in RK2 has been studied as a simplified model of bacterial chromosome segregation. Structural information on full-length ParB proteins is limited, mainly due to the inability to grow crystals suitable for diffraction studies. We show, using CD and NMR, that KorB has regions of significant intrinsic disorder and hence it adopts a multiplicity of conformations in solution. The biophysical data are consistent with bioinformatic predictions based on the amino acid sequence that the N-terminal region and also the region between the central DNA-binding domain and the C-terminal dimerization domain are intrinsically disordered. We have used small angle x-ray scattering data to determine the ensemble of solution conformations for KorB and selected deletion mutants, based on models of the known domain structures. This conformational range of KorB is likely to be biologically required for DNA partitioning and for binding to a diverse set of partner proteins.

Influence of cations, pH and dispersed phases on pectin emulsification properties.

The cooperativity of six cations (Ca2+, Mg2+, Zn2+, Al3+, Cr3+ and Fe3+), three pectins (sugar beet, high and low methyl esterified), three dispersed phases (medium chain triglycerides (MCT), orange oil and hexadecane), time (30 days) and pH (2.0 and 6.0) has been investigated in the formation and stability against coarsening of oil-in-water emulsions. Cations generally influenced emulsion stability in the following order (most stable) Ca2+ â€‹> â€‹Mg2+ â€‹> â€‹Al3+ â€‹> â€‹Cr3+ â€‹> â€‹Zn2+ â€‹> â€‹Fe3+ (least stable). This order largely coincided with that of the strength of pectin-cation interactions showing that the higher the affinity of cation for pectin the less stable the emulsion. More stable emulsions were formed with sugar beet pectin, which was also unresponsive to the presence of cations, followed by high- and then low-methyl esterified samples. At pH 2.0 all pectins showed their best emulsification performance whereas shifting pH to 6.0 severely impaired emulsification capacity and longer term stability against droplet growth. Smaller droplets were created with hexadecane under all conditions studied followed by MCT and orange oil in agreement with their aqueous solubilities. The present results advance our understanding of the stabilisation of emulsions using pectin and allow us to tailor their functionality for applications in food, pharmaceutical and biomedical industries.

Hydrolytic Degradation of Heparin in Acidic Environments: Nuclear Magnetic Resonance Reveals Details of Selective Desulfation.

Heparin is a complex glycosaminoglycan, derived mainly from pig mucosa, used therapeutically for its anticoagulant activity. Yet, owing largely to the chain complexity, the progressive effects of environmental conditions on heparin structure have not been fully described. A systematic study of the influence of acidic hydrolysis on heparin chain length and substitution has therefore been conducted. Changes in the sulfation pattern, monitored via 2D NMR, revealed initial de-N-sulfation of the molecule (pH 1/ 40 °C) and unexpectedly identified the secondary sulfate of iduronate as more labile than the 6-O-sulfate of glucosamine residues under these conditions (pH 1/ 60 °C). Additionally, the loss of sulfate groups, rather than depolymerization, accounted for most of the reduction in molecular weight. This provides an alternative route to producing partially 2-O-de-sulfated heparin derivatives that avoids using conventional basic conditions and may be of value in the optimization of processes associated with the production of heparin pharmaceuticals.

Bioactive arabinogalactans from the leaves of Opilia celtidifolia Endl. ex Walp. (Opiliaceae).

The leaves of the tree Opilia celtidifolia have a long tradition for being used in Mali and other West African countries against various ailments such as for wound healing. Previous studies on polysaccharides from these leaves showed the presence of pectic-like polymers with an effect on the human complement system as well as the ability to activate macrophages. The present study shows that bioactive arabinogalactans isolated by water of 50°C could be separated into two acidic fractions, Oc50A1 and Oc50A2. The former could, by gel filtration on Sephacryl S-400, be separated into two fractions, which were further purified on a Superdex 200 column to give the fractions Oc50A1.I.pur and Oc50A1.II.pur. These fractions were subjected to chemical and biological studies. The polysaccharides consisted mainly of heavily branched type II arabinogalactans and minor amounts of rhamnogalacturonan I regions. The isolated polymers had a high human complement-fixating ability, as well as the ability to stimulate rat macrophages and dendritic cells (DCs) and to induce B cell proliferation. These effects were especially pronounced for the higher molecular weight fraction of Oc50A1.I.pur. The fractions Oc50A1.I.pur and Oc501.II.pur stimulated secretion of pro-inflammatory cytokines from purified B cells or DCs. Collectively, these results indicate that the arabinogalactan type II polymers present in the leaves of O. celtidifolia may be used to develop medical devices for regulating inflammatory processes.

Hydrodynamic and mass spectrometry analysis of nearly-intact human fibrinogen, chicken fibrinogen, and of a substantially monodisperse human fibrinogen fragment X.

The shape and solution properties of fibrinogen are affected by the location of the C-terminal portion of the Aalpha chains, which is presently still controversial. We have measured the hydrodynamic properties of a human fibrinogen fraction with these appendages mostly intact, of chicken fibrinogen, where they lack 11 characteristic 13-amino acids repeats, and of human fragment X, a plasmin early degradation product in which they have been removed. The human fibrinogen/fragment X samples were extensively characterized by SDS-PAGE/Western blotting and mass spectrometry, allowing their composition to be precisely determined. The solution properties of all samples were then investigated by analytical ultracentrifugation and size-exclusion HPLC coupled with multi-angle light scattering and differential pressure viscometry detectors. The measured parameters suggest that the extra repeats have little influence on the overall fibrinogen conformation, while a significant change is brought about by the removal of the C-terminal portion of the Aalpha chains beyond residue Aalpha200.

Structure and heterogeneity of gliadin: a hydrodynamic evaluation.

A study of the heterogeneity and conformation in solution [in 70% (v/v) aq. ethanol] of gliadin proteins from wheat was undertaken based upon sedimentation velocity in the analytical ultracentrifuge, analysis of the distribution coefficients and ellipsoidal axial ratios assuming quasi-rigid particles, allowing for a range of plausible time-averaged hydration values. All classical fractions (alpha, gamma, omega(slow), omega(fast)) show three clearly resolved components. Based on the weight-average sedimentation coefficient for each fraction and a weight-average molecular weight from sedimentation equilibrium and/or cDNA sequence analysis, all the proteins are extended molecules with axial ratios ranging from ~10 to 30 with alpha appearing the most extended and gamma the least.

Polysaccharide drug delivery systems based on pectin and chitosan.

Chitosans and pectins are natural polysaccharides which show great potential in drug delivery systems. Chitosans are a family of strongly polycationic derivatives of poly-N-acetyl-D-glucosamine. This positive charge is very important in chitosan drug delivery systems as it plays a very important role in mucoadhesion (adhesion to the mucosal surface). Other chitosan based drug delivery systems involve complexation with ligands to form chitosan nanoparticles with can be used to encapsulate active compounds. Pectins are made of several structural elements the most important of which are the homogalacturonan (HG) and type I rhamnogalacturonan (RG-I) regions often described in simplified terms as the "smooth" and "hairy" regions respectively. Pectin HG regions consist of poly-glacturonic acid residues which can be partially methyl esterified. Pectins with a degree of methyl esterification (DM) > 50% are known as high methoxyl (HM) pectins and consequently low methoxyl (LM) pectins have a DM less than 50%. Low methoxyl pectins are of particular interest in drug delivery as they can form gels with calcium ion (Ca2+) which has potential applications especially in nasal formulations. In this chapter we will discuss the physicochemical properties of both chitosans and pectins and how these translate to current and potential drug delivery systems.

Stem cells: The therapeutic role in the treatment of diabetes mellitus.

The unlimited proliferative ability and plasticity to generate other cell types ensures that stem cells represent a dynamic system apposite for the identification of new molecular targets and the production and development of novel drugs. These cell lines derived from embryos could be used as a model for the study of basic and applied aspects in medical therapeutics, environmental mutagenesis and disease management. As a consequence, these can be tested for safety or to predict or anticipate potential toxicity in humans. Human ES cell lines may, therefore, prove clinically relevant to the development of safer and more effective drugs for patients presenting with diabetes mellitus.

The identification and characterisation of novel bioactive peptides derived from porcine liver.

Bioactive peptides (BAPs) can be derived from a variety of sources; these could be from dietary proteins which are then broken down in the gastrointestinal tract to release BAPs, or they can be isolated from various sources ex vivo. Sources include plant-based proteins such as soy, and chickpeas, and animal proteins from waste from the meat industry and from fish skin. Bioinformatics is also a useful approach to assess the peptides released from digests due to the great number of possible sequences that can be isolated from proteins. Therefore, an in silico analysis of peptides could potentially lead to a more rapid discovery of BAPs. This article investigates a "crude" liver peptide mixture derived from papain hydrolysis of porcine liver and purified peptides derived from the hydrolysates following HPLC fractionation and in silico digestion of the host proteins identified using LC-MS/MS. This allowed the identification of two proteins (cytosol aminopeptidase and haemoglobin subunit alpha) present in the "crude" mixture after LC-MS/MS. In silico hydrolysis of these proteins identified that several peptides were predicted to be both present in the crude mixture using the BIOPEP database and to have potential bioactivity using the Peptide Ranker tool. Peptides (FWG, MFLG and SDPPLVFVG) with the greatest potential bioactivity and which had not previously been reported in the literature were then synthesised. The results indicated that the predicted bioactivity of the synthetic peptides would likely include antioxidant activity. FWG and MFLG derived from the in silico papain hydrolysis of cytosol aminopeptidase showed activity better or comparable to Trolox in the Oxygen Radical Absorbance Capacity (ORAC) assay. The use of these in silico tools, alongside a robust range of biochemical assays which cover a wider range of bioactivities would be a way of improving the discovery of novel bioactive peptides.

An Auristatin nanoconjugate targeting CXCR4+ leukemic cells blocks acute myeloid leukemia dissemination.

BACKGROUND: Current acute myeloid leukemia (AML) therapy fails to eliminate quiescent leukemic blasts in the bone marrow, leading to about 50% of patient relapse by increasing AML burden in the bone marrow, blood, and extramedullar sites. We developed a protein-based nanoparticle conjugated to the potent antimitotic agent Auristatin E that selectively targets AML blasts because of their CXCR4 receptor overexpression (CXCR4+) as compared to normal cells. The therapeutic rationale is based on the involvement of CXCR4 overexpression in leukemic blast homing and quiescence in the bone marrow, and the association of these leukemic stem cells with minimal residual disease, dissemination, chemotherapy resistance, and lower patient survival. METHODS: Monomethyl Auristatin E (MMAE) was conjugated with the CXCR4 targeted protein nanoparticle T22-GFP-H6 produced in E. coli. Nanoconjugate internalization and in vitro cell viability assays were performed in CXCR4+ AML cell lines to analyze the specific antineoplastic activity through the CXCR4 receptor. In addition, a disseminated AML animal model was used to evaluate the anticancer effect of T22-GFP-H6-Auristatin in immunosuppressed NSG mice (n = 10/group). U of Mann-Whitney test was used to consider if differences were significant between groups. RESULTS: T22-GFP-H6-Auristatin was capable to internalize and exert antineoplastic effects through the CXCR4 receptor in THP-1 and SKM-1 CXCR4+ AML cell lines. In addition, repeated administration of the T22-GFP-H6-Auristatin nanoconjugate (9 doses daily) achieves a potent antineoplastic activity by internalizing specifically in the leukemic cells (luminescent THP-1) to selectively eliminate them. This leads to reduced involvement of leukemic cells in the bone marrow, peripheral blood, liver, and spleen, while avoiding toxicity in normal tissues in a luminescent disseminated AML mouse model. CONCLUSIONS: A novel nanoconjugate for targeted drug delivery of Auristatin reduces significantly the acute myeloid leukemic cell burden in the bone marrow and blood and blocks its dissemination to extramedullar organs in a CXCR4+ AML model. This selective drug delivery approach validates CXCR4+ AML cells as a target for clinical therapy, not only promising to improve the control of leukemic dissemination but also dramatically reducing the severe toxicity of classical AML therapy.

Fluorescent Dye Labeling Changes the Biodistribution of Tumor-Targeted Nanoparticles.

Fluorescent dye labeling is a common strategy to analyze the fate of administered nanoparticles in living organisms. However, to which extent the labeling processes can alter the original nanoparticle biodistribution has been so far neglected. In this work, two widely used fluorescent dye molecules, namely, ATTO488 (ATTO) and Sulfo-Cy5 (S-Cy5), have been covalently attached to a well-characterized CXCR4-targeted self-assembling protein nanoparticle (known as T22-GFP-H6). The biodistribution of labeled T22-GFP-H6-ATTO and T22-GFP-H6-S-Cy5 nanoparticles has been then compared to that of the non-labeled nanoparticle in different CXCR4+ tumor mouse models. We observed that while parental T22-GFP-H6 nanoparticles accumulated mostly and specifically in CXCR4+ tumor cells, labeled T22-GFP-H6-ATTO and T22-GFP-H6-S-Cy5 nanoparticles showed a dramatic change in the biodistribution pattern, accumulating in non-target organs such as liver or kidney while reducing tumor targeting capacity. Therefore, the use of such labeling molecules should be avoided in target and non-target tissue uptake studies during the design and development of targeted nanoscale drug delivery systems, since their effect over the fate of the nanomaterial can lead to considerable miss-interpretations of the actual nanoparticle biodistribution.

Yield and physicochemical properties of EPS from Halomonas sp. strain TG39 identifies a role for protein and anionic residues (sulfate and phosphate) in emulsification of n-hexadecane.

In this study, we investigated the yield and physicochemical properties of the high molecular weight extracellular polymeric substance (HMW-EPS) produced by Halomonas sp. strain TG39 when grown on different types and ratios of substrates. Glucose (1% w/v) and a peptone/yeast extract ratio of 5.1 (0.6% w/v final concentration) yielded an EPS fraction (HMW-glucose) exhibiting the highest anionic activity (20.5) and specific emulsifying activity (EI24 = 100%) compared to EPS produced by cells grown on mannitol, sucrose, malt extract or no carbon source. The HMW-EPS fractions were capable of binding approximately 255-464 mg of methylene blue (MB) per gram of EPS, which represents the highest reported binding of MB by a bacterial EPS. A comparative evaluation of these properties to those of commercial hydrocolloids indicated that the combined effect of protein and anionic residues of the HMW-EPS contributed to its ability to emulsify n-hexadecane. Liquid chromatography revealed the HMW-glucose EPS to be a heterogeneous polymer with a polydispersity index of 1.8. This work presents evidence of a correlation between the anionic nature and protein content of bacterial EPS with its emulsifying qualities, and identifies EPS produced by strain TG39 as a high MB-binding bacterial sorbant with potential biotechnological application.

Caffeine release and absorption from caffeinated gums.

The objectives of this study were to estimate the impact of chewing time on caffeine release from gum and to understand caffeine pharmacokinetics. Caffeine release increased with chewing time (2 min < 5 min < 10 min). Furthermore, two plasma caffeine concentration peaks were observed suggesting that caffeine absorption occurs both through the oral mucosa and gastrointestinal tract. This is of practical relevance to maximise caffeine doses and to synchronise effort with peak caffeine concentration.