ABSTRACT
For the inâ situ resource utilization (ISRU) of asteroids, the cost-mass conundrum needs to be solved, and technologies may need to be conceptualised from first principals. By using this approach, this Review seeks to illustrate how chemical process intensification can help with the development of disruptive technologies and business matters, how this might influence space-industry start-ups, and even industrial transformations on Earth. The disruptive technology considered is continuous microflow solvent extraction and, as another disruptive element therein, the use of ionic liquids. The space business considered is asteroid mining, as it is probably the most challenging resource site, and the focus is on its last step: the purification of adjacent metals (cobalt versus nickel). The key economic barrier is defined as the reduction in the amount of water used in the asteroid mining process. This Review suggests a pathway toward water savings up to the technological limit of the best Earth-based processes and their physical limits.
ABSTRACT
Moringa oleifera seeds are well known for their ability to cause flocculation in turbid water and facilitate bacterial inhibition. These effects are due to the cationic polypeptide MO2.1, which affects the surface charge of suspended particles and causes lysis of bacterial cells. However, the attachment of bacteria to MO2.1 prevents further bacterial attachment, reducing the effectiveness of the seeds. This research investigated the effect of surfactants on functionality and reuse of Moringa seeds to develop a sustainable water treatment technique. The seed extracts (MO2.1) were used with a functionalised sand system, and the sands were exposed to commercially available (ionic and non-ionic) surfactants, dodecyl glucoside and sodium dodecyl sulfate. Artificially polluted water contaminated with Escherichia coli was used to evaluate the efficiency of the system. The non-ionic surfactant was found to be effective at separating E. coli from the functionalised sand without the detachment of the MO2.1 and subsequent loss of the system efficiency. This was successfully repeated four times. The results demonstrated a sustainable, reusable technique to inhibit bacterial contamination in water.
Subject(s)
Bacterial Adhesion/drug effects , Glucosides/pharmacology , Moringa oleifera/chemistry , Peptides/pharmacology , Surface-Active Agents/pharmacology , Water Purification/methods , Adsorption , Bacteria/drug effects , Drinking Water/microbiology , Escherichia coli/drug effects , Escherichia coli/isolation & purification , Flocculation , Plant Extracts/chemistry , Recycling , Seeds/chemistryABSTRACT
Metal removal potential of indigenous mining microorganisms from acid mine drainage (AMD) has been well recognised in situ at mine sites. However, their removal capacity requires to be investigated for AMD treatment. In the reported study, the capacity of an indigenous AMD microbial consortium dominated with Klebsormidium sp., immobilised in a photo-rotating biological contactor (PRBC), was investigated for removing various elements from a multi-ion synthetic AMD. The synthetic AMD was composed of major (Cu, Mn, Mg, Zn, Ca, Na, Ni) and trace elements (Fe, Al, Cr, Co, Se, Ag, Mo) at initial concentrations of 2 to 100 mg/L and 0.005 to 1 mg/L, respectively. The PRBC was operated for two 7-day batch periods under pH conditions of 3 and 5. The maximum removal was observed after 3 and 6 days at pH 3 and 5, respectively. Daily water analysis data demonstrated the ability of the algal-microbial biofilm to remove an overall average of 25-40 % of the major elements at pH 3 in the order of Na > Cu > Ca > Mg > Mn > Ni > Zn, whereas a higher removal (35-50 %) was observed at pH 5 in the order of Cu > Mn > Mg > Ca > Ni > Zn > Na. The removal efficiency of the system for trace elements varied extensively between 3 and 80 % at the both pH conditions. The batch data results demonstrated the ability for indigenous AMD algal-microbial biofilm for removing a variety of elements from AMD in a PRBC. The work presents the potential for further development and scale-up to use PBRC inoculated with AMD microorganisms at mine sites for first or secondary AMD treatment.
Subject(s)
Cells, Immobilized/metabolism , Industrial Waste , Metals, Heavy/metabolism , Microbial Consortia , Wastewater/microbiology , Water Pollutants, Chemical/metabolism , Bioreactors/microbiology , Hydrogen-Ion Concentration , Time FactorsABSTRACT
Bactericidal proteins from the Moringa oleifera seed are reported to be suitable alternatives to conventional methods of bacterial reduction in water. In this study the cationic bactericidal M. oleifera proteins were isolated by attachment onto the surface of silicon dioxide. This functionalised SiO2(ƒ-SiO2) was then exposed to Escherichia coli and Micrococcus luteus to examine whether the ƒ-SiO2 could be used to inactivate the bacteria. The effect of the non-ionic surfactant dodecyl glucoside on the attachment of these bacteria to the ƒ-SiO2 was examined with the aim of developing a method of reusable bacterial inactivation. The primary result of this study was that the E. coli could be readily separated from the ƒ-SiO2, allowing the ƒ-SiO2 to be used for further bacterial inactivation. The regeneration of the ƒ-SiO2 was demonstrated using fluorescence microscopy on bacterial cells stained with propidium iodide, and zeta potential measurements. Future applications of this work include a reusable method of removing bacteria from contaminated water.
Subject(s)
Moringa oleifera , Silicon Dioxide , Anti-Bacterial Agents , Bacteria , Escherichia coliABSTRACT
The stringent regulations for discharging acid mine drainage (AMD) has led to increased attention on traditional or emerging treatment technologies to establish efficient and sustainable management for mine effluents. To assess new technologies, laboratory investigations on AMD treatment are necessary requiring a consistent supply of AMD with a stable composition, thus limiting environmental variability and uncertainty during controlled experiments. Additionally, biotreatment systems using live cells, particularly micro-algae, require appropriate nutrient availability. Synthetic AMD (Syn-AMD) meets these requirements. However, to date, most of the reported Syn-AMDs are composed of only a few selected heavy metals without considering the complexity of actual AMD. In this study, AMD was synthesised based on the typical AMD characteristics from a copper mine where biotreatment is being considered using indigenous AMD algal-microbes. Major cations (Ca, Na, Cu, Zn, Mg, Mn and Ni), trace metals (Al, Fe, Ag, Na, Co, Mo, Pb and Cr), essential nutrients (N, P and C) and high SO(4) were incorporated into the Syn-AMD. This paper presents the preparation of chemically complex Syn-AMD and the challenges associated with combining metal salts of varying solubility that is not restricted to one particular mine site. The general approach reported and the particular reagents used can produce alternative Syn-AMD with varying compositions. The successful growth of indigenous AMD algal-microbes in the Syn-AMD demonstrated its applicability as appropriate generic media for cultivation and maintenance of mining microorganisms for future biotreatment studies.