Lipid Bilayer Reformation Using the Wiping Blade for Improved Ion Channel Analysis.

The measurement of ion permeation activity across planar lipid bilayers is a useful technique for the functional analysis and drug evaluation of ion channels at the single-molecule level. To enhance the data throughput, parallelization of lipid bilayers is desirable. However, existing parallelized approaches face challenges in simultaneously and efficiently measuring ion channel activities under various conditions on one chip. In this study, we propose an approach to overcome these limitations by developing a device capable of repeated measurements of ion channels incorporated into individually arrayed lipid bilayers. Our device forms an array of a lipid bilayer at a micropore on a separator by merging two lipid monolayers assembled on the surface of aqueous droplets. We introduce a vertically moving, blade-shaped module─referred to as a "wiping blade"─which enables controlled disruption and reformation of the bilayer at the micropore. By optimizing the surface properties and clearance of the wiping blade, we successfully achieved repeated bilayer formation. The arrayed lipid bilayer device with the integrated wiping blade module demonstrates a 5-fold improvement in data throughput during ion channel activity measurements. Finally, we validate the practical utility of our device by evaluating the effects of an ion channel inhibitor. The developed device opens new avenues for high-throughput analysis and screening of ion channels, leading to significant advancements in drug discovery and functional studies of membrane proteins. It offers a powerful tool for researchers in the field and holds promise for accelerating drug development by targeting ion channels.

Role of Negatively Charged Lipids Achieving Rapid Accumulation of Water-Soluble Molecules and Macromolecules into Cell-Sized Liposomes against a Concentration Gradient.

Liposomes, molecular self-assemblies resembling biological membranes, are a promising scaffold to investigate the physicochemical logic behind the complexity of living cells. Despite elaborate synthetic studies constructing cell-like chemical systems using liposomes, less attention has been paid to the proactive role of the membrane emerging as dynamics of the molecular self-assembly. This study investigated the liposomes containing anionic phospholipids by exposing them to steady flow conditions using a newly constructed automatic microfluidic observation platform. We demonstrated that the liposomes accumulated even macromolecules under the microfluidic condition without pore formation. By investigating the effect of composition of liposomes and visualizing negatively charged phospholipids upon the flow, we presumed that the external flow caused a compositional asymmetry of anionic phospholipids between the inner/outer leaflets, and the asymmetry enabled a rapid accumulation of those molecules against the concentration gradient. The current study opens new research interests regarding the nature of biological membranes under steady flow conditions.

Rapid and Resilient Detection of Toxin Pore Formation Using a Lipid Bilayer Array.

An artificial cell membrane is applied to study the pore formation mechanisms of bacterial pore-forming toxins for therapeutic applications. Electrical monitoring of ionic current across the membrane provides information on the pore formation process of toxins at the single pore level, as well as the pore characteristics such as dimensions and ionic selectivity. However, the efficiency of pore formation detection largely depends on the encounter probability of toxin to the membrane and the fragility of the membrane. This study presents a bilayer lipid membrane array that parallelizes 4 or 16 sets of sensing elements composed of pairs of a membrane and a series electrical resistor. The series resistor prevents current overflow attributed to membrane rupture, and enables current monitoring of the parallelized membranes with a single detector. The array system shortens detection time of a pore-forming protein and improves temporal stability. The current signature represents the states of pore formation and rupture at respective membranes. The developed system will help in understanding the toxic activity of pore-forming toxins.

Purification-Free MicroRNA Detection by Using Magnetically Immobilized Nanopores on Liposome Membrane.

MicroRNAs have critical roles in a number of serious diseases and, as a result, are of major interest as clinical diagnostic targets. Conventionally, microRNAs are collected from blood and urine samples and are measured by either quantitative reverse-transcription polymerase chain reaction or microarray. Recently, nanopore sensing techniques have been applied for measuring microRNAs at the single-molecule level. However, existing techniques are technically complex, needing several tools and requiring purification and/or labeling of microRNA samples prior to use. Here we report a method for microRNA detection in a simple procedure requiring neither purification nor labeling. This system utilizes magnetic beads anchored with DNA and nanopores on a liposome membrane. In the presence of the target microRNA, it forms a duplex with complementary DNA, which is then cleaved by a duplex-specific nuclease (DSN). The cleaved DNA, which harbors a liposome on its terminus, is subsequently released from the magnetic bead, fuses to the lipid bilayer on chip, and emits an electrical signal derived from the formation of a nanopore. Because of a property of the DSN, the signals derived from microRNAs are expected to be amplified in an isothermal reaction. Our system possesses the specificity to detect target microRNAs from mixtures containing >106 different microRNA sequences and readily uses blood or urine samples. Although the limit of detection is above 10 nM and needs to be improved for practical diagnosis, because purification and labeling are not required, the presented system proposes a possible schematic for the development of easy and on-site diagnosis.

Self-Propelled Motion of Monodisperse Underwater Oil Droplets Formed by a Microfluidic Device.

We evaluated the speed profile of self-propelled underwater oil droplets comprising a hydrophobic aldehyde derivative in terms of their diameter and the surrounding surfactant concentration using a microfluidic device. We found that the speed of the oil droplets is dependent on not only the surfactant concentration but also the droplet size in a certain range of the surfactant concentration. This tendency is interpreted in terms of combination of the oil and surfactant affording spontaneous emulsification in addition to the Marangoni effect.

Integrated Microfluidic System for Size-Based Selection and Trapping of Giant Vesicles.

Vesicles composed of phospholipids (liposomes) have attracted interest as artificial cell models and have been widely studied to explore lipid-lipid and lipid-protein interactions. However, the size dispersity of liposomes prepared by conventional methods was a major problem that inhibited their use in high-throughput analyses based on monodisperse liposomes. In this study, we developed an integrative microfluidic device that enables both the size-based selection and trapping of liposomes. This device consists of hydrodynamic selection and trapping channels in series, which made it possible to successfully produce an array of more than 60 monodisperse liposomes from a polydisperse liposome suspension with a narrow size distribution (the coefficient of variation was less than 12%). We successfully observed a size-dependent response of the liposomes to sequential osmotic stimuli, which had not clarified so far, by using this device. Our device will be a powerful tool to facilitate the statistical analysis of liposome dynamics.

Nonlinear concentration gradients regulated by the width of channels for observation of half maximal inhibitory concentration (IC50) of transporter proteins.

This paper describes a simple microfluidic device that can generate nonlinear concentration gradients. We changed the "width" of channels that can drastically shorten the total microfluidic channel length and simplify the microfluidic network design rather than the "length" of channels. The logarithmic concentration gradients generated by the device were in good agreement with those obtained by simulation. Using this device, we evaluated a probable IC50 value of the ABC transporter proteins by the competitive transport assays at five different logarithmic concentrations. This probable IC50 value was in good agreement with an IC50 value (0.92 µM) obtained at the diluted concentrations of seven points.

Lipid bilayers on a picoliter microdroplet array for rapid fluorescence detection of membrane transport.

This paper describes picoliter-sized lipid bilayer chambers and their theoretical model for the rapid detection of membrane transport. To prepare the chambers, semispherical aqueous droplets are patterned on a hydrophilic/hydrophobic substrate and then brought into contact with another aqueous droplet in lipid-dispersed organic solvent, resulting in the formation of the lipid bilayers on the semispherical droplets. The proposed method implements the lipid bilayer chambers with 25-fold higher ratio of lipid membrane area (S) to chamber volume (V) compared to the previous spherical droplet chambers. Using these chambers, we are able to trace the time-course of Ca(2+) influx through α-hemolysin pores by a fluorescent indicator. Moreover, we confirm that the detection time of the substrate transport is inversely proportional to the S/V ratio of the developed chambers, which is consistent with the simulation results based on the developed model. Our chambers and model might be useful for rapid functional analyses of membrane transport phenomena.

pH-induced motion control of self-propelled oil droplets using a hydrolyzable gemini cationic surfactant.

Self-propelled motion of micrometer-sized substances has drawn much attention as an autonomous transportation system. One candidate vehicle is a chemically driven micrometer-sized oil droplet. However, to the best of our knowledge, there has been no report of a chemical reaction system controlling the three-dimensional motion of oil droplets underwater. In this study, we developed a molecular system that controlled the self-propelled motion of 4-heptyloxybenzaldehyde oil droplets by using novel gemini cationic surfactants containing carbonate linkages (2G12C). We found that, in emulsions containing sodium hydroxide, the motion time of the self-propelled oil droplets was longer in the presence of 2G12C than in the presence of gemini cationic surfactants without carbonate linkages. Moreover, in 2G12C solution, oil droplets at rest underwent unidirectional, self-propelled motion in a gradient field toward a higher concentration of sodium hydroxide. Even though they stopped within several seconds, they restarted in the same direction. 2G12C was gradually hydrolyzed under basic conditions to produce a pair of the corresponding monomeric surfactants, which exhibit different interfacial properties from 2G12C. The prolonged and restart motion of the oil droplets were explained by the increase in the heterogeneity of the interfacial tension of the oil droplets.

Droplet split-and-contact method for high-throughput transmembrane electrical recording.

This paper describes the rapid and repetitive formation of planar lipid bilayers via a mechanical droplet contact method for high-throughput ion channel analysis. In this method, first, an aqueous droplet delivered in a lipid-in-oil solution is mechanically divided into two small droplets. Second, the two small droplets contact each other, resulting in the lipid bilayer formation. Third, an ion channel is immediately reconstituted into the bilayer and the transmembrane current signals are measured. By repeating this procedure, massive data sets of the channel signals can be obtained. This method allowed us to perform statistical analysis of α-hemolysin conductance (n = 256 within 30 min) and channel inhibition experiments by contacting different types of the droplets in a short time frame.

Real-time quantitative characterization of ion channel activities for automated control of a lipid bilayer system.

This paper describes a novel signal processing method to characterize the activity of ion channels on a lipid bilayer system in a real-time and quantitative manner. Lipid bilayer systems, which enable single-channel level recordings of ion channel activities against physiological stimuli in vitro, are gaining attention in various research fields. However, the characterization of ion channel activities has heavily relied on time-consuming analyses after recording, and the inability to return the quantitative results in real time has long been a bottleneck to incorporating the system into practical products. Herein, we report a lipid bilayer system that integrates real-time characterization of ion channel activities and real-time response based on the characterization result. Unlike conventional batch processing, an ion channel signal is divided into short segments and processed during the recording. After optimizing the system to maintain the same characterization accuracy as conventional operation, we demonstrated the usability of the system with two applications. One is quantitative control of a robot based on ion channel signals. The velocity of the robot was controlled every second, which was around tens of times faster than the conventional operation, in proportion to the stimulus intensity estimated from changes in ion channel activities. The other is the automation of data collection and characterization of ion channels. By constantly monitoring and maintaining the functionality of a lipid bilayer, our system enabled continuous recording of ion channels over 2 h without human intervention, and the time of manual labor has been reduced from conventional 3 h to 1 min at a minimum. We believe the accelerated characterization and response in the lipid bilayer systems presented in this work will facilitate the transformation of lipid bilayer technology toward a practical level, finally leading to its industrialization.

3D printed microfluidic devices for lipid bilayer recordings.

This paper verifies the single-step and monolithic fabrication of 3D structural lipid bilayer devices using stereolithography. Lipid bilayer devices are utilized to host membrane proteins in vitro for biological assays or sensing applications. There is a growing demand to fabricate functional lipid bilayer devices with a short lead-time, and the monolithic fabrication of components by 3D printing is highly anticipated. However, the prerequisites of 3D printing materials which lead to reproducible lipid bilayer formation are still unknown. Here, we examined the feasibility of membrane protein measurement using lipid bilayer devices fabricated by stereolithography. The 3D printing materials were characterized and the surface smoothness and hydrophobicity were found to be the relevant factors for successful lipid bilayer formation. The devices were comparable to the ones fabricated by conventional procedures in terms of measurement performances like the amplitude of noise and the waiting time for lipid bilayer formation. We further demonstrated the extendibility of the technology for the functionalization of devices, such as incorporating microfluidic channels for solution exchangeability and arraying multiple chambers for robust measurement.

Rapid detection of a cocaine-binding aptamer using biological nanopores on a chip.

This paper describes a methodology for the rapid and highly selective detection of cocaine using a membrane protein channel combined with a DNA aptamer. The DNA aptamer recognizes the cocaine molecule with high selectivity. We successfully detected a low concentration of cocaine (300 ng/mL, the drug test cutoff limit) within 60 s using a biological nanopore embedded in a microchip.

Lipid-coated microdroplet array for in vitro protein synthesis.

Monitoring complex biological assays such as in vitro protein synthesis over long periods in micrometer-sized cavities of poly(dimethyl siloxane) (PDMS) microfluidic devices requires a strategy that solves the adsorption and absorption problems on PDMS surfaces. In this study, we developed a technique that instantaneously arrays aqueous microdroplets coated with a phospholipid membrane within a single microfluidic device. The simple lipid bilayer coating effectively inhibits the adsorption of proteins and DNA, whereas the encapsulation of the droplet reduces the area in contact with the PDMS surface, resulting in decreased absorption in part. Although the size becomes smaller during the first few hours, a lipid-coated microdroplet array demonstrated a temporal stability of more than 20 h and a size uniformity of CV 3% in the device. Furthermore, we succeeded in expressing a green fluorescent protein by confining an in vitro translation system in the microdroplets, which was confirmed by scanning the fluorescence spectrum of the droplets, demonstrating that the lipid coat secured the synthetic reaction from the adsorption problem.

Biohybrid sensor for odor detection.

Biohybrid odorant sensors that directly integrate a biological olfactory system have been increasingly studied and are suggested to be the next generation of ultrasensitive sensors by taking advantage of the sensitivity and selectivity of living organisms. In this review, we provide a detailed description of the recent developments of biohybrid odorant sensors, especially considering the requisites for their perspective of on-site applications. We introduce the methodologies to effectively capture the biological signals from olfactory systems by readout devices, and describe the essential properties regarding the gaseous detection, stability, quality control, and portability. Moreover, we address the recent progress on multiple odorant recognition using multiple sensors as well as the current screening approaches for pairs of orphan receptors and ligands necessary for the extension of the currently available range of biohybrid sensors. Finally, we discuss our perspectives for the future for the development of practical odorant sensors.

Efficient Lipid Bilayer Formation by Dipping Lipid-Loaded Microperforated Sheet in Aqueous Solution.

This paper describes a method for a bilayer lipid membrane (BLM) formation using a perforated sheet along with an open chamber. Microscopic observation of the formed membrane showed a typical droplet interface bilayer. We proved that the formed membrane was a BLM based on electrical measurements of the membrane protein α-hemolysin, which produces nanopores in BLMs. Unlike the conventional approach for BLM formation based on the droplet contact method, this method provides aqueous surfaces with no organic solvent coating layer. Hence, this method is suitable for producing BLMs that facilitate the direct addition of chemicals into the aqueous phase.

Highly sensitive VOC detectors using insect olfactory receptors reconstituted into lipid bilayers.

This paper reports a volatile organic compound (VOC) sensor based on olfactory receptors that were reconstituted into a lipid bilayer and used in a specifically designed gas flow system for rapid parts per billion (ppb)-level detection. This VOC sensor achieves both rapid detection and high detection probability because of its gas flow system and array design. Specifically, the gas flow system includes microchannels and hydrophobic microslits, which facilitate both the introduction of gas into the droplet and droplet mixing. We installed this system into a parallel lipid bilayer device and subsequently demonstrated parts per billion-level (0.5 ppb) detection of 1-octen-3-ol in human breath. Therefore, this system extends the various applications of biological odorant sensing, including breath diagnosis systems and environmental monitoring.

CYK4 relaxes the bias in the off-axis motion by MKLP1 kinesin-6.

Centralspindlin, a complex of the MKLP1 kinesin-6 and CYK4 GAP subunits, plays key roles in metazoan cytokinesis. CYK4-binding to the long neck region of MKLP1 restricts the configuration of the two MKLP1 motor domains in the centralspindlin. However, it is unclear how the CYK4-binding modulates the interaction of MKLP1 with a microtubule. Here, we performed three-dimensional nanometry of a microbead coated with multiple MKLP1 molecules on a freely suspended microtubule. We found that beads driven by dimeric MKLP1 exhibited persistently left-handed helical trajectories around the microtubule axis, indicating torque generation. By contrast, centralspindlin, like monomeric MKLP1, showed similarly left-handed but less persistent helical movement with occasional rightward movements. Analysis of the fluctuating helical movement indicated that the MKLP1 stochastically makes off-axis motions biased towards the protofilament on the left. CYK4-binding to the neck domains in MKLP1 enables more flexible off-axis motion of centralspindlin, which would help to avoid obstacles along crowded spindle microtubules.

Hydrodynamic accumulation of small molecules and ions into cell-sized liposomes against a concentration gradient.

In investigations of the emergence of protocells at the origin of life, repeatable and continuous supply of molecules and ions into the closed lipid bilayer membrane (liposome) is one of the fundamental challenges. Demonstrating an abiotic process to accumulate substances into preformed liposomes against the concentration gradient can provide a clue. Here we show that, without proteins, cell-sized liposomes under hydrodynamic environment repeatedly permeate small molecules and ions, including an analogue of adenosine triphosphate, even against the concentration gradient. The mechanism underlying this accumulation of the molecules and ions is shown to involve their unique partitioning at the liposomal membrane under forced external flow in a constrained space. This abiotic mechanism to accumulate substances inside of the liposomal compartment without light could provide an energetically up-hill process for protocells as a critical step toward the contemporary cells.