Modulating Liquid-Liquid Transitions and Glass Formation in Zeolitic Imidazolate Frameworks by Decoration with Electron-Withdrawing Cyano Groups.

The liquid phase of metal-organic frameworks (MOFs) is key for the preparation of melt-quenched bulk glasses as well as the shaping of these materials for various applications; however, only very few MOFs can be melted and transformed into stable glasses. Here, the solvothermal and mechanochemical preparation of a new series of functionalized derivatives of ZIF-4 (Zn(im)2, where im- = imidazolate and ZIF = zeolitic imidazolate framework) containing the cyano-functionalized imidazolate linkers CNim- (4-cynanoimidazolate) and dCNim- (4,5-dicyanoimidazolate) is reported. The strongly electron-withdrawing nature of the CN groups facilitates low-temperature melting of the materials (below 310 °C for some derivatives) and the formation of microporous ZIF glasses with remarkably low glass-transition temperatures (down to only about 250 °C) and strong resistance against recrystallization. Besides conventional ZIF-4, the CN-functionalized ZIFs are so far the only MOFs to show an exothermic framework collapse to a low-density liquid phase and a subsequent transition to a high-density liquid phase. By systematic adjustment of the fraction of cyano-functionalized linkers in the ZIFs, we derive fundamental insights into the thermodynamics of the unique polyamorphic nature of these glass formers as well as further design rules for the porosity of the ZIF glasses and the viscosity of their corresponding liquids. The results provide new insights into the unusual phenomenon of liquid-liquid transitions as well as a guide for the chemical diversification of meltable MOFs, likely with implications beyond the archetypal ZIF glass formers.

Tuning the High-Pressure Phase Behaviour of Highly Compressible Zeolitic Imidazolate Frameworks: From Discontinuous to Continuous Pore Closure by Linker Substitution.

The high-pressure behaviour of flexible zeolitic imidazolate frameworks (ZIFs) of the ZIF-62 family with the chemical composition M(im)2-x (bim)x is presented (M2+ =Zn2+ , Co2+ ; im- =imidazolate; bim- =benzimidazolate, 0.02≤x≤0.37). High-pressure powder X-ray diffraction shows that the materials contract reversibly from an open pore (op) to a closed pore (cp) phase under a hydrostatic pressure of up to 4000 bar. Sequentially increasing the bim- fraction (x) reinforces the framework, leading to an increased threshold pressure for the op-to-cp phase transition, while the total volume contraction across the transition decreases. Most importantly, the typical discontinuous op-to-cp transition (first order) changes to an unusual continuous transition (second order) for x≥0.35. This allows finetuning of the void volume and the pore size of the material continuously by adjusting the pressure, thus opening new possibilities for MOFs in pressure-switchable devices, membranes, and actuators.

Photochemical Approach to the Cyclohepta[b]indole Scaffold by Annulative Two-Carbon Ring-Expansion.

We report on the implementation of the concept of a photochemically elicited two-carbon homologation of a π-donor-π-acceptor substituted chromophore by triple-bond insertion. Implementing a phenyl connector between the slide-in module and the chromophore enabled the synthesis of cylohepta[b]indole-type building blocks by a metal-free annulative one-pot two-carbon ring expansion of the five-membered chromophore. Post-irradiative structural elaboration provided founding members of the indolo[2,3-d]tropone family of compounds. Control experiments in combination with computational chemistry on this multibond reorganization process founded the basis for a mechanistic hypothesis.

Meltable Mixed-Linker Zeolitic Imidazolate Frameworks and Their Microporous Glasses: From Melting Point Engineering to Selective Hydrocarbon Sorption.

Porous glasses from metal-organic frameworks (MOFs) represent a new class of functional inorganic-organic materials, which have been proposed for applications ranging from solid electrolytes to radioactive waste storage. So far, just a few zeolitic imidazolate frameworks (ZIFs), a subset of MOFs, have been reported to melt and the structural and compositional requirements for MOF melting and glass formation are poorly understood. Here, we show how the melting point of the prototypical ZIF-4/ZIF-62(M) frameworks (composition M(im)2-x(bim)x; M2+ = Co2+, Zn2+; im- = imidazolate; bim- = benzimidazolate) can be controlled systematically by adjusting the molar ratio of the two imidazolate-type linkers im- and bim-. By covering the entire range from x = 0 to 0.35, we unveil a delicate transition from ZIF materials showing sequential amorphization/recrystallization to derivatives exhibiting coherent melting and a liquid phase that is stable over a large temperature window. The melting point of this ZIF system is a direct function of x and can be lowered from ca. 430 °C to only 370 °C, by far the lowest melting point reported for a three-dimensional porous MOF. On the basis of our results, we postulate compositional requirements for ZIF melting and glass formation, which may guide the search for other meltable ZIFs. Moreover, gas physisorption experiments establish that the ZIF glasses adsorb technologically relevant C3 and C4 hydrocarbons. Importantly, the adsorption kinetics are much faster for propylene compared to propane and are also dependent on the im-:bim- ratio, thus demonstrating the potential of these ZIF glasses for applications in gas separation.

Control of Metal-Organic Framework Crystallization by Metastable Intermediate Pre-equilibrium Species.

There is an increasing amount of interest in metal-organic frameworks (MOFs) for a variety of applications, from gas sensing and separations to electronics and catalysis. However, the mechanisms by which they crystallize remain poorly understood. Herein, an important new insight into MOF formation is reported. It is shown that, prior to network assembly, crystallization intermediates in the canonical ZIF-8 system exist in a dynamic pre-equilibrium, which depends on the reactant concentrations and the progress of reaction. Concentration can, therefore, be used as a synthetic handle to directly control particle size, with potential implications for industrial scale-up and gas sorption applications. These findings enable the rationalization of apparent contradictions between previous studies of ZIF-8 and opens up new opportunities for the control of crystallization in network solids more generally.

Cis versus Trans: The Coordination Environment about the Tin(IV) Atom in Spirocyclic Amino Alcohol Derivatives.

The syntheses of amino alcohols MeN(CH2 CH2 CMe2 OH)2 (1), MeN(CMe2 CH2 OH)(CH2 CMe2 OH) (2), MeN(CH2 CH2 CH2 OH)(CH2 CMe2 OH) (3), MeN(CH2 CH2 CMe2 OH)(CH2 CMe2 OH) (4), MeN(CH2 CH2 CMe2 OH)(CH2 CH2 OH) (5), and MeN(CH2 CH2 OH) (CH2 CH2 CH2 OH) (6) as well as spirocyclic tin(IV) alkoxides spiro-[nBuN(CH2 CMe2 O)2 ]2 Sn (7), spiro-[MeN(CH2 CH2 CMe2 O)2 ]2 Sn (8), spiro-[para-FC6 H4 N (CH2 CMe2 O)2 ]2 Sn (9), spiro-[MeN(CMe2 CH2 O)(CH2 CMe2 O)]2 Sn (10), spiro-[MeN(CH2 CH2 CH2 O)(CH2 CMe2 O)]2 Sn (11), spiro-[MeN(CH2 CH2 CMe2 O)(CH2 CMe2 O)]2 Sn (12), spiro-[MeN(CH2 CH2 CMe2 O)(CH2 CH2 O)]2 Sn (13) and spiro-[MeN(CH2 CH2 O)(CH2 CH2 CH2 O)]2 Sn (14) are reported. The compounds were characterized by 1 H, 13 C (1-14) and 119 Sn (7-14) NMR and IR spectroscopy, EIMS and single-crystal XRD (2, 7-10 and 13, 14). Graph-set analyses were performed for compounds [(MeNH(CMe2 CH2 OH)(CH2 CMe2 OH)][HC(O)O] (2 a) and 2. The coordination environment about the tin(IV) centre of the spirocyclic compounds and their possible stereoisomers were analysed by DFT calculations (spiro-[MeN(CH2 CMe2 O)2 ]2 Sn, 8-10 and 13).

Highly porous metal-organic framework liquids and glasses via a solvent-assisted linker exchange strategy of ZIF-8.

By combining the porosity of crystalline metal-organic frameworks (MOFs) with the unique processability of the liquid state, melt-quenched MOF glasses offer exciting opportunities for molecular separation. However, progress in this field is limited by two factors. Firstly, only very few MOFs melt at elevated temperatures and transform into stable glasses upon cooling the corresponding MOF liquid. Secondly, the MOF glasses obtained thus far feature only very small porosities and very small pore sizes. Here, we demonstrate solvent-assisted linker exchange (SALE) as a versatile method to prepare highly porous melt-quenched MOF glasses from the canonical ZIF-8. Two additional organic linkers are incorporated into the non-meltable ZIF-8, yielding high-entropy, linker-exchanged ZIF-8 derivatives undergoing crystal-to-liquid-to-glass phase transitions by thermal treatment. The ZIF-8 glasses demonstrate specific pore volumes of about 0.2 cm3g-1, adsorb large amounts of technologically relevant C3 and C4 hydrocarbons, and feature high kinetic sorption selectivities for the separation of propylene from propane.

Breathing porous liquids based on responsive metal-organic framework particles.

Responsive metal-organic frameworks (MOFs) that display sigmoidal gas sorption isotherms triggered by discrete gas pressure-induced structural transformations are highly promising materials for energy related applications. However, their lack of transportability via continuous flow hinders their application in systems and designs that rely on liquid agents. We herein present examples of responsive liquid systems which exhibit a breathing behaviour and show step-shaped gas sorption isotherms, akin to the distinct oxygen saturation curve of haemoglobin in blood. Dispersions of flexible MOF nanocrystals in a size-excluded silicone oil form stable porous liquids exhibiting gated uptake for CO2, propane and propylene, as characterized by sigmoidal gas sorption isotherms with distinct transition steps. In situ X-ray diffraction studies show that the sigmoidal gas sorption curve is caused by a narrow pore to large pore phase transformation of the flexible MOF nanocrystals, which respond to gas pressure despite being dispersed in silicone oil. Given the established flexible nature and tunability of a range of MOFs, these results herald the advent of breathing porous liquids whose sorption properties can be tuned rationally for a variety of technological applications.

Frustrated flexibility in metal-organic frameworks.

Stimuli-responsive flexible metal-organic frameworks (MOFs) remain at the forefront of porous materials research due to their enormous potential for various technological applications. Here, we introduce the concept of frustrated flexibility in MOFs, which arises from an incompatibility of intra-framework dispersion forces with the geometrical constraints of the inorganic building units. Controlled by appropriate linker functionalization with dispersion energy donating alkoxy groups, this approach results in a series of MOFs exhibiting a new type of guest- and temperature-responsive structural flexibility characterized by reversible loss and recovery of crystalline order under full retention of framework connectivity and topology. The stimuli-dependent phase change of the frustrated MOFs involves non-correlated deformations of their inorganic building unit, as probed by a combination of global and local structure techniques together with computer simulations. Frustrated flexibility may be a common phenomenon in MOF structures, which are commonly regarded as rigid, and thus may be of crucial importance for the performance of these materials in various applications.