ABSTRACT
ConspectusLithium-sulfur (Li-S) batteries have attracted worldwide attention as promising next-generation rechargeable batteries due to their high theoretical energy density of 2600 Wh kg-1. The actual energy density of Li-S batteries at the pouch cell level has significantly exceeded that of state-of-the-art Li-ion batteries. However, the overall performances of Li-S batteries under practical working conditions are limited by the sluggish conversion kinetics of the sulfur cathodes. To overcome the above challenge, various kinetic promotion strategies have been proposed to accelerate the multiphase and multi-electron cathodic redox reactions between sulfur, lithium polysulfides (LiPSs), and lithium sulfide. Nowadays, kinetic promoters have been massively employed in sulfur cathodes to achieve Li-S batteries with high energy densities, high rates, and long lifespans. A comprehensive and timely summary of cutting-edge kinetic promoters for sulfur cathodes is of great essence to afford an in-depth understanding of the unique Li-S electrochemistry.In this Account, we outline the recent efforts on the design of sulfur cathode kinetic promoters for advanced Li-S batteries. The latest progress is discussed in detail regarding heterogeneous, homogeneous, and semi-immobilized kinetic promoters. Heterogeneous promoters, representatively known as electrocatalysts, function mainly by reducing the energy barriers of the interfacial electrochemical reactions. The working mechanism, activity regulation strategies, and reconstitution/deactivation processes of the heterogeneous promoters are reviewed to provide guiding principles for rational design. In comparison, homogeneous promoters are able to fully contact with the reaction interfaces and regulate the electron/ion-inaccessible reactants in working Li-S batteries. Redox mediators and redox comediators are typical homogeneous promoters. The former establishes extra chemical reaction pathways to circumvent the originally sluggish steps and boost the overall kinetics, while the latter fundamentally modifies the LiPS molecules to enhance their redox kinetics. For semi-immobilized promoters, the active units are generally anchored on the cathode substrate through flexible chains with mobile characteristics. Such a design endows the promoter with both heterogeneous and homogeneous characteristics to comprehensively regulate the multiphase sulfur redox reactions involving both mobile and immobile reactants.Overall, this Account summarizes the fundamental electrochemistry, design principles, and practical promotion effects of the various kinetic promoters used for the sulfur cathodes in Li-S batteries. We believe that this Account will provide an in-depth and cutting-edge understanding of the unique sulfur electrochemistry, thereby providing guidance for further development of high-performance Li-S batteries and analogous rechargeable battery systems.
ABSTRACT
Selective electroreduction of CO2 to C1 feed gas provides an attractive avenue to store intermittent renewable energy. However, most of the CO2-to-CO catalysts are designed from the perspective of structural reconstruction, and it is challenging to precisely design a meaningful confining microenvironment for active sites on the support. Herein, we report a local sulfur doping method to precisely tune the electronic structure of an isolated asymmetric nickel-nitrogen-sulfur motif (Ni1-NSC). Our Ni1-NSC catalyst presents >99% faradaic efficiency for CO2-to-CO under a high current density of -320 mA cm-2. In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy and differential electrochemical mass spectrometry indicated that the asymmetric sites show a significantly weaker binding strength of *CO and a lower kinetic overpotential for CO2-to-CO. Further theoretical analysis revealed that the enhanced CO2 reduction reaction performance of Ni1-NSC was mainly due to the effectively decreased intermediate activation energy.
ABSTRACT
Single-atom catalysts exhibit promising electrocatalytic activity, a trait that can be further enhanced through the introduction of heteroatom doping within the carbon skeleton. Nonetheless, the intricate relationship between the doping positions and activity remains incompletely elucidated. This contribution sheds light on an inductive effect of single-atom sites, showcasing that the activity of the oxygen reduction reaction (ORR) can be augmented by reducing the spatial gap between the doped heteroatom and the single-atom sites. Drawing inspiration from this inductive effect, we propose a synthesis strategy involving ligand modification aimed at precisely adjusting the distance between dopants and single-atom sites. This precise synthesis leads to optimized electrocatalytic activity for the ORR. The resultant electrocatalyst, characterized by Fe-N3P1 single-atom sites, demonstrates remarkable ORR activity, thus exhibiting great potential in zinc-air batteries and fuel cells.
ABSTRACT
Coordination engineering for single-atom sites has drawn increasing attention, yet its chemical synthesis remains a tough issue, especially for tailorable coordination structures. Herein, a molecular recognition strategy is proposed to fabricate single-atom sites with regulable local coordination structures. Specifically, a heteroatom-containing ligand serves as the guest molecule to induce coordination interaction with the metal-containing host, precisely settling the heteroatoms into the local structure of single-atom sites. As a proof of concept, thiophene is selected as the guest molecule, and sulfur atoms are successfully introduced into the local coordination structure of iron single-atom sites. Ultrahigh oxygen reduction electrocatalytic activity is achieved with a half-wave potential of 0.93â V versus reversible hydrogen electrode. Furthermore, the strategy possesses excellent universality towards diversified types of single-atom sites. This work makes breakthroughs in the fabrication of single-atom sites and affords new opportunities in structural regulation at the atomic level.
ABSTRACT
The development of emerging rechargeable batteries is often hindered by limited chemical understanding composing of entangled patterns in an enormous space. Herein, we propose an interpretable hybrid machine learning framework to untangle intractable degradation chemistries of conversion-type batteries. Rather than being a black box, this framework not only demonstrates an ability to accurately forecast lithium-sulfur batteries (with a test mean absolute error of 8.9 % for the end-of-life prediction) but also generate useful physical understandings that illuminate future battery design and optimization. The framework also enables the discovery of a previously unknown performance indicator, the ratio of electrolyte amount to high-voltage-region capacity at the first discharge, for lithium-sulfur batteries complying practical merits. The present data-driven approach is readily applicable to other energy storage systems due to its versatility and flexibility in modules and inputs.
ABSTRACT
Lithium-sulfur (Li-S) battery is strongly considered as one of the most promising energy storage systems due to its high theoretical energy density and low cost. However, the sluggish reduction kinetics from Li2 S4 to Li2 S during discharge hinders the practical application of Li-S batteries. Although various electrocatalysts have been proposed to improve the reaction kinetics, the electrocatalytic mechanism is unclear due to the complexity of sulfur reduction reactions (SRR). It is crucial to understand the electrocatalytic mechanism thoroughly for designing advanced electrocatalysts. Herein an electrocatalytic model is constructed to reveal the chemical mechanism of the SRR in Li-S batteries based on systematical density functional theory calculations, taking heteroatoms-doped carbon materials as an example. The adsorption energy of LiSy â (y=1, 2, or 3) radicals is used as a key descriptor to predict the reaction pathway, rate-determining step, and overpotential. A diagram for designing advanced electrocatalysts is accordingly constructed. This work establishes a theoretical model, which is an intelligent integration for probing the complicated SRR mechanisms and designing advanced electrocatalysts for high-performance Li-S batteries.
ABSTRACT
The lifespan of practical lithium (Li)-metal batteries is severely hindered by the instability of Li-metal anodes. Fluorinated solid electrolyte interphase (SEI) emerges as a promising strategy to improve the stability of Li-metal anodes. The rational design of fluorinated molecules is pivotal to construct fluorinated SEI. Herein, design principles of fluorinated molecules are proposed. Fluoroalkyl (-CF2 CF2 -) is selected as an enriched F reservoir and the defluorination of the C-F bond is driven by leaving groups on ß-sites. An activated fluoroalkyl molecule (AFA), 2,2,3,3-tetrafluorobutane-1,4-diol dinitrate is unprecedentedly proposed to render fast and complete defluorination and generate uniform fluorinated SEI on Li-metal anodes. In Li-sulfur (Li-S) batteries under practical conditions, the fluorinated SEI constructed by AFA undergoes 183â cycles, which is three times the SEI formed by LiNO3 . Furthermore, a Li-S pouch cell of 360â Wh kg-1 delivers 25â cycles with AFA. This work demonstrates rational molecular design principles of fluorinated molecules to construct fluorinated SEI for practical Li-metal batteries.
ABSTRACT
Lithium metal batteries are considered a promising candidate for high-energy-density energy storage. However, the strong reducibility and high reactivity of lithium lead to low Coulombic efficiency when contacting oxidants, such as lithium polysulfide caused by the serious "shuttle effect" in lithium-sulfur batteries. Herein we design selectively permeable lithium-ion channels on lithium metal surface, which allow lithium ions to pass through by electrochemical overpotential, while the polysulfides are effectively blocked due to the much larger steric hindrance than lithium ions. The selective permeation of lithium ions through the channels is further elucidated by the molecular simulation and visualization experiment. Consequently, a prolonged cycle life of 75â cycles and high Coulombic efficiency of 99 % are achieved in a practical Li-S pouch cell with limited amounts of lithium and electrolyte, confirming the unique role the selective ion permeation plays in protecting highly reactive alkali metal anodes in working batteries.
ABSTRACT
Lithium metal is strongly regarded as a promising electrode material in next-generation rechargeable batteries due to its extremely high theoretical specific capacity and lowest reduction potential. However, the safety issue and short lifespan induced by uncontrolled dendrite growth have hindered the practical applications of lithium metal anodes. Hence, we propose a flexible anion-immobilized ceramic-polymer composite electrolyte to inhibit lithium dendrites and construct safe batteries. Anions in the composite electrolyte are tethered by a polymer matrix and ceramic fillers, inducing a uniform distribution of space charges and lithium ions that contributes to a dendrite-free lithium deposition. The dissociation of anions and lithium ions also helps to reduce the polymer crystallinity, rendering stable and fast transportation of lithium ions. Ceramic fillers in the electrolyte extend the electrochemically stable window to as wide as 5.5 V and provide a barrier to short circuiting for realizing safe batteries at elevated temperature. The anion-immobilized electrolyte can be applied in all-solid-state batteries and exhibits a small polarization of 15 mV. Cooperated with LiFePO4 and LiNi0.5Co0.2Mn0.3O2 cathodes, the all-solid-state lithium metal batteries render excellent specific capacities of above 150 mAhâ g-1 and well withstand mechanical bending. These results reveal a promising opportunity for safe and flexible next-generation lithium metal batteries.
ABSTRACT
The development of energy-storage devices has received increasing attention as a transformative technology to realize a low-carbon economy and sustainable energy supply. Lithium-sulfur (Li-S) batteries are considered to be one of the most promising next-generation energy-storage devices due to their ultrahigh energy density. Despite the extraordinary progress in the last few years, the actual energy density of Li-S batteries is still far from satisfactory to meet the demand for practical applications. Considering the sulfur electrochemistry is highly dependent on solid-liquid-solid multi-phase conversion, the electrolyte amount plays a primary role in the practical performances of Li-S cells. Therefore, a lean electrolyte volume with low electrolyte/sulfur ratio is essential for practical Li-S batteries, yet under these conditions it is highly challenging to achieve acceptable electrochemical performances regarding sulfur kinetics, discharge capacity, Coulombic efficiency, and cycling stability especially for high-sulfur-loading cathodes. In this Review, the impact of the electrolyte/sulfur ratio on the actual energy density and the economic cost of Li-S batteries is addressed. Challenges and recent progress are presented in terms of the sulfur electrochemical processes: the dissolution-precipitation conversion and the solid-solid multi-phasic transition. Finally, prospects of future lean-electrolyte Li-S battery design and engineering are discussed.
ABSTRACT
Polysulfide intermediates (PSs), the liquid-phase species of active materials in lithium-sulfur (Li-S) batteries, connect the electrochemical reactions between insulative solid sulfur and lithium sulfide and are key to full exertion of the high-energy-density Li-S system. Herein, the concept of sulfur container additives is proposed for the direct modification on the PSs species. By reversible storage and release of the sulfur species, the container molecule converts small PSs into large organosulfur species. The prototype di(tri)sulfide-polyethylene glycol sulfur container is highly efficient in the reversible PS transformation to multiply affect electrochemical behaviors of sulfur cathodes in terms of liquid-species clustering, reaction kinetics, and solid deposition. The stability and capacity of Li-S cells was thereby enhanced. The sulfur container is a strategy to directly modify PSs, enlightening the precise regulation on Li-S batteries and multi-phase electrochemical systems.
ABSTRACT
Inâ situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium-sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co4 N) in working Li-S batteries that renders highly active electrocatalysts (CoSx ). Electrochemical cycling induces the transformation from single-crystalline Co4 N to polycrystalline CoSx that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co4 N enables stable operation of high-rate (10â C, 16.7â mA cm-2 ) and electrolyte-starved (4.7â µL mgS -1 ) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.
ABSTRACT
Use of redox mediators (RMs) is an effective strategy to enhance reaction kinetics of multi-electron sulfur electrochemistry. However, the soluble small-molecule RMs usually aggravate the internal shuttle and thus further reduce the battery efficiency and cyclability. A semi-immobilization strategy is now proposed for RM design to effectively regulate the sulfur electrochemistry while circumvent the inherent shuttle issue in a working battery. Small imide molecules as the model RMs were co-polymerized with moderate-chained polyether, rendering a semi-immobilized RM (PIPE) that is spatially restrained yet kinetically active. A small amount of PIPE (5 % in cathode) extended the cyclability of sulfur cathode from 37 to 190 cycles with 80 % capacity retention at 0.5â C. The semi-immobilization strategy helps to understand RM-assisted sulfur electrochemistry in alkali metal batteries and enlightens the chemical design of active additives for advanced electrochemical energy storage devices.
ABSTRACT
The preparation of carbon materials usually involves the decomposition of precursors and the reorganization of the as-generated fragments. However, the cleavage of bonds and the simultaneous formation of new bonds at nearly the same positions prevents effective yet precise fabrication. Herein, a supramolecular precursor, cucurbit[6]uril, that contains multiple bonds with distinct bond strengths is proposed to decouple the twin problem of simultaneous bond cleavage and formation, allowing multistage transformations to hierarchical porous carbon and metal-doped carbon in a single yet effective pyrolysis step without the need of a template or additional purification. As a proof-of-concept, the Fe-doped carbon electrocatalysts realized a Pt/C-like half-wave potential of 0.869â V vs. RHE and small Tafel slope of 51.3â mV dec-1 in oxygen reduction reaction.
ABSTRACT
Surface reactions constitute the foundation of various energy conversion/storage technologies, such as the lithium-sulfur (Li-S) batteries. To expedite surface reactions for high-rate battery applications demands in-depth understanding of reaction kinetics and rational catalyst design. Now an inâ situ extrinsic-metal etching strategy is used to activate an inert monometal nitride of hexagonal Ni3 N through iron-incorporated cubic Ni3 FeN. Inâ situ etched Ni3 FeN regulates polysulfide-involving surface reactions at high rates. Electron microscopy was used to unveil the mechanism of inâ situ catalyst transformation. The Li-S batteries modified with Ni3 FeN exhibited superb rate capability, remarkable cycling stability at a high sulfur loading of 4.8â mg cm-2 , and lean-electrolyte operability. This work opens up the exploration of multimetallic alloys and compounds as kinetic regulators for high-rate Li-S batteries and also elucidates catalytic surface reactions and the role of defect chemistry.
ABSTRACT
Flexible energy storage systems are imperative for emerging flexible devices that are revolutionizing our life. Lithium-ion batteries, the current main power sources, are gradually approaching their theoretical limitation in terms of energy density. Therefore, alternative battery chemistries are urgently required for next-generation flexible power sources with high energy densities, low cost, and inherent safety. Flexible lithium-sulfur (Li-S) batteries and analogous flexible alkali metal-chalcogen batteries are of paramount interest owing to their high energy densities endowed by multielectron chemistry. In this review, we summarized the recent progress of flexible Li-S and analogous batteries. A brief introduction to flexible energy storage systems and general Li-S batteries has been provided first. Progress in flexible materials for flexible Li-S batteries are reviewed subsequently, with a detailed classification of flexible sulfur cathodes as those based on carbonaceous (e.g., carbon nanotubes, graphene, and carbonized polymers) and composite (polymers and inorganics) materials and an overview of flexible lithium anodes and flexible solid-state electrolytes. Advancements in other flexible alkali metal-chalcogen batteries are then introduced. In the next part, we emphasize the importance of cell packaging and flexibility evaluation, and two special flexible battery prototypes of foldable and cable-type Li-S batteries are highlighted. In the end, existing challenges and future development of flexible Li-S and analogous alkali metal-chalcogen batteries are summarized and prospected.
ABSTRACT
High-dielectric solvents were explored for enhancing the sulfur utilization in lithium-sulfur (Li-S) batteries, but their applications have been impeded by low stability at the lithium metal anode. Now a radical-directed, lithium-compatible, and strongly polysulfide-solvating high-dielectric electrolyte based on tetramethylurea is presented. Over 200â hours of cycling was realized in Li|Li symmetric cells, showing good compatibility of the tetramethylurea-based electrolyte with lithium metal. The high solubility of short-chain polysulfides, as well as the presence of active S3 .- radicals, enabled pouch cells to deliver a discharge capacity of 1524â mAh g-1 and an energy density of 324â Wh kg-1 . This finding suggests an alternative recipe to ether-based electrolytes for Li-S batteries.
ABSTRACT
Lithium and sodium metal batteries are considered as promising next-generation energy storage devices due to their ultrahigh energy densities. The high reactivity of alkali metal toward organic solvents and salts results in side reactions, which further lead to undesirable electrolyte depletion, cell failure, and evolution of flammable gas. Herein, first-principles calculations and inâ situ optical microscopy are used to study the mechanism of organic electrolyte decomposition and gas evolution on a sodium metal anode. Once complexed with sodium ions, solvent molecules show a reduced LUMO, which facilitates the electrolyte decomposition and gas evolution. Such a general mechanism is also applicable to lithium and other metal anodes. We uncover the critical role of ion-solvent complexation for the stability of alkali metal anodes, reveal the mechanism of electrolyte gassing, and provide a mechanistic guidance to electrolyte and lithium/sodium anode design for safe rechargeable batteries.
ABSTRACT
Self-healing capability helps biological systems to maintain their survivability and extend their lifespan. Similarly, self-healing is also beneficial to next-generation secondary batteries because high-capacity electrode materials, especially the cathodes such as oxygen or sulfur, suffer from shortened cycle lives resulting from irreversible and unstable phase transfer. Herein, by mimicking a biological self-healing process, fibrinolysis, we introduced an extrinsic healing agent, polysulfide, to enable the stable operation of sulfur microparticle (SMiP) cathodes. An optimized capacity (â¼3.7 mAh cm-2) with almost no decay after 2000 cycles at a high sulfur loading of 5.6 mg(S) cm-2 was attained. The inert SMiP is activated by the solubilization effect of polysulfides whereas the unstable phase transfer is mediated by mitigated spatial heterogeneity of polysulfides, which induces uniform nucleation and growth of solid compounds. The comprehensive understanding of the healing process, as well as of the spatial heterogeneity, could further guide the design of novel healing agents (e.g., lithium iodine) toward high-performance rechargeable batteries.
ABSTRACT
Lithium-sulfur (Li-S) battery system is endowed with tremendous energy density, resulting from the complex sulfur electrochemistry involving multielectron redox reactions and phase transformations. Originated from the slow redox kinetics of polysulfide intermediates, the flood of polysulfides in the batteries during cycling induced low sulfur utilization, severe polarization, low energy efficiency, deteriorated polysulfide shuttle, and short cycling life. Herein, sulfiphilic cobalt disulfide (CoS2) was incorporated into carbon/sulfur cathodes, introducing strong interaction between lithium polysulfides and CoS2 under working conditions. The interfaces between CoS2 and electrolyte served as strong adsorption and activation sites for polar polysulfides and therefore accelerated redox reactions of polysulfides. The high polysulfide reactivity not only guaranteed effective polarization mitigation and promoted energy efficiency by 10% but also promised high discharge capacity and stable cycling performance during 2000 cycles. A slow capacity decay rate of 0.034%/cycle at 2.0 C and a high initial capacity of 1368 mAh g(-1) at 0.5 C were achieved. Since the propelling redox reaction is not limited to Li-S system, we foresee the reported strategy herein can be applied in other high-power devices through the systems with controllable redox reactions.