Interfacial Rearrangements of Block Copolymer Micelles Toward Gelled Liquid-Liquid Interfaces with Adjustable Viscoelasticity.

Though amphiphiles are ubiquitously used for altering interfaces, interfacial reorganization processes are in many cases obscure. For example, adsorption of micelles to liquid-liquid interfaces is often accompanied by rapid reorganizations toward monolayers. Then, the involved time scales are too short to be followed accurately. A block copolymer system, which comprises poly(ethylene oxide)110 -b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}170 (i.e., PEO110 -b-qPDPAEMA170 with quaternized poly(diisopropylaminoethyl methacrylate)) is presented. Its reorganization kinetics at the water/n-decane interface is slowed down by electrostatic interactions with ferricyanide ([Fe(CN)6 ]3- ). This deceleration allows an observation of the restructuring of the adsorbed micelles not only by tracing the interfacial pressure, but also by analyzing the interfacial rheology and structure with help of atomic force microscopy. The observed micellar flattening and subsequent merging toward a physically interconnected monolayer lead to a viscoelastic interface well detectable by interfacial shear rheology (ISR). Furthermore, the "gelled" interface is redox-active, enabling a return to purely viscous interfaces and hence a manipulation of the rheological properties by redox reactions. Additionally, interfacial Prussian blue formation stiffens the interface. Such manipulation and in-depth knowledge of the rheology of complex interfaces can be beneficial for the development of emulsion formulations in industry or medicine, where colloidal stability or adapted permeability is crucial.

Electrochemical Stimulation of Water-Oil Interfaces by Nonionic-Cationic Block Copolymer Systems.

Variable interfacial tension could be desirable for many applications. Beyond classical stimuli like temperature, we introduce an electrochemical approach employing polymers. Hence, aqueous solutions of the nonionic-cationic block copolymer poly(ethylene oxide)114-b-poly{[2-(methacryloyloxy)ethyl]diisopropylmethylammonium chloride}171 (i.e., PEO114-b-PDPAEMA171 with a quaternized poly(diisopropylaminoethyl methacrylate) block) were investigated by emerging drop measurements and dynamic light scattering, analyzing the PEO114-b-qPDPAEMA171 impact on the interfacial tension between water and n-decane and its micellar formation in the aqueous bulk phase. Potassium hexacyanoferrates (HCFs) were used as electroactive complexants for the charged block, which convert the bishydrophilic copolymer into amphiphilic species. Interestingly, ferricyanides ([Fe(CN)6]3-) act as stronger complexants than ferrocyanides ([Fe(CN)6]4-), leading to an insoluble qPDPAEMA block in the presence of ferricyanides. Hence, bulk micellization was demonstrated by light scattering. Due to their addressability, in situ redox experiments were performed to trace the interfacial tension under electrochemical control, directly utilizing a drop shape analyzer. Here, the open-circuit potential (OCP) was changed by electrolysis to vary the ratio between ferricyanides and ferrocyanides in the aqueous solution. While a chemical oxidation/reduction is feasible, also an electrochemical oxidation leads to a significant change in the interfacial tension properties. In contrast, a corresponding electrochemical reduction showed only a slight response after converting ferricyanides to ferrocyanides. Atomic force microscopy (AFM) images of the liquid/liquid interface transferred to a solid substrate showed particles that are in accordance with the diameter from light scattering experiments of the bulk phase. In conclusion, the present results could be an important step toward economic switching of interfaces suitable, e.g., for emulsion breakage.

Electroactive and degradable supramolecular microgels.

In this work, we synthesized electroactive and degradable microgels based on biomacromolecular building blocks, which enable the controlled release of therapeutic drugs. Functional chitosan-poly(hydroquinone) (Ch:PHQ) microgels exhibiting redox-active and pH-sensitive properties were synthesized by an oxidative polymerization in an inverse miniemulsion system. Physically crosslinked microgels were formed by polymerization of hydroquinone in the presence of chitosan through the formation of hydrogen bonds between PHQ and Ch. A series of microgel samples with variable Ch : PHQ ratios were synthesized. These obtained microgels exhibit pH-responsive properties due to the protonation/deprotonation of amino-groups of chitosan in the microgel system. Poly(hydroquinone) is a redox-active polymer exhibiting a two-electron/proton-transfer behavior and conveys this property to the microgels as confirmed by cyclic voltammetry. In addition, the microgels can be switched by electrochemical means: they swell in the oxidized state or shrink in the reduced state. In the presence of urea or lysozyme, the microgels undergo a fast degradation due to the disruption of hydrogen bonds acting as physical crosslinks in the microgel networks or due to the cleavage of glucosidic linkages of the incorporated chitosan scaffold, respectively. Doxorubicin (DOX), an anticancer drug, could be effectively encapsulated into the microgels and released in the presence of an enzyme, indicating that these biodegradable microgels could be used as drug delivery vehicles for tumor cells.

Functional Microgels and Microgel Systems.

Microgels are macromolecular networks swollen by the solvent in which they are dissolved. They are unique systems that are distinctly different from common colloids, such as, e.g., rigid nanoparticles, flexible macromolecules, micelles, or vesicles. The size of the microgel networks is in the range of several micrometers down to nanometers (then sometimes called "nanogels"). In a collapsed state, they might resemble hard colloids but they can still contain significant amounts of solvent. When swollen, they are soft and have a fuzzy surface with dangling chains. The presence of cross-links provides structural integrity, in contrast to linear and (hyper)branched polymers. Obviously, the cross-linker content will allow control of whether microgels behave more "colloidal" or "macromolecular". The combination of being soft and porous while still having a stable structure through the cross-linked network allows for designing microgels that have the same total chemical composition, but different properties due to a different architecture. Microgels based, e.g., on two monomers but have either statistical spatial distribution, or a core-shell or hollow-two-shell morphology will display very different properties. Microgels provide the possibility to introduce chemical functionality at different positions. Combining architectural diversity and compartmentalization of reactive groups enables thus short-range coexistence of otherwise instable combinations of chemical reactivity. The open microgel structure is beneficial for uptake-release purposes of active substances. In addition, the openness allows site-selective integration of active functionalities like reactive groups, charges, or markers by postmodification processes. The unique ability of microgels to retain their colloidal stability and swelling degree both in water and in many organic solvents allows use of different chemistries for the modification of microgel structure. The capability of microgels to adjust both their shape and volume in response to external stimuli (e.g., temperature, ionic strength and composition, pH, electrochemical stimulus, pressure, light) provides the opportunity to reversibly tune their physicochemical properties. From a physics point of view, microgels are particularly intriguing and challenging, since their intraparticle properties are intimately linked to their interparticle behavior. Microgels, which reveal interface activity without necessarily being amphiphilic, develop even more complex behavior when located at fluid or solid interfaces: the sensitivity of microgels to various stimuli allows, e.g., the modulation of emulsion stability, adhesion, sensing, and filtration. Hence, we envision an ever-increasing relevance of microgels in these fields including biomedicine and process technology. In sum, microgels unite properties of very different classes of materials. Microgels can be based on very different (bio)macromolecules such as, e.g., polysaccharides, peptides, or DNA, as well as on synthetic polymers. This Account focuses on synthetic microgels (mainly based on acrylamides); however, the general, fundamental features of microgels are independent of the chemical nature of the building moieties. Microgels allow combining features of chemical functionality, structural integrity, macromolecular architecture, adaptivity, permeability, and deformability in a unique way to include the "best" of the colloidal, polymeric, and surfactant worlds. This will open the door for novel applications in very different fields such as, e.g., in sensors, catalysis, and separation technology.

Easy-Preparable Butyrylcholinesterase/Microgel Construct for Facilitated Organophosphate Biosensing.

A versatile guest matrix was fabricated from a temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA), MG) for the gentle incorporation of butyrylcholinesterase (BChE). The microgel/BChE films were built up on a surface of graphite-based screen-printed electrodes (SPEs) premodified with MnO2 nanoparticles via a two-step sequential adsorption under careful temperature and pH control. On this basis, a rather simple amperometric biosensor construct was formed, which uses butyrylthiocholine as BChE substrate with subsequent MnO2-mediated thiocholine oxidation at a graphite-based SPE. The complexation of BChE with the microgel was found to be safe and effective, as confirmed by a high operational and rather good long-term storage stability of the resultant SPE-MnO2/MG/BChE biosensors. The small mesh size of the microgel with respect to the size of BChE results in a predominant outer complexation of BChE within the dangling chains of the microgel rather than a deep penetration of the enzyme into the microgels. Given such surface localization, BChE is easily accessible both for the substrate and for cholinesterase inhibitors. This was supported by the analytical characteristics of the SPE-MnO2/MG/BChE biosensor that were examined and optimized both for the substrate and for the enzyme detection. The SPE-MnO2/MG/BChE biosensor enabled precision detection of organophosphorus pesticides (diazinon(oxon), chlorpyrifos(oxon)) in aqueous samples with minimized interference from extraneous (nonanalyte) substances (e.g., ions of heavy metals). The detection limits for diazinon(oxon) and chlorpyrifos(oxon) were estimated to be as low as 6 × 10-12 M and 8 × 10-12 M, respectively, after 20 min of preincubation with these irreversible inhibitors of BChE.

Balancing Segregation and Complexation in Amphiphilic Copolymers by Architecture and Confinement.

Segregation is a well-known principle for micellization, as solvophobic components try to minimize interactions with other entities (such as solvent) by self-assembly. An opposite principle is based on complexation (or coacervation), leading to the coassembly/association of different components. Most cases in the literature rely on only one of these modes, though the classical micellization scheme (such as spherical micelles, wormlike micelles, and vesicles) can be enriched by a subtle balance of segregation and complexation. Because of their counteraction, micellar constructs with unprecedented structure and behavior could be obtained. In this feature, systems are highlighted, which are between both mechanisms, and we study concentration, architecture, and confinement effects. Systems with inter- and intramolecular interactions are presented, and the effects of polymer topology and monomer sequence on the resulting structures are discussed. It is shown that complexation can lead to altered micellization behavior as the complex of one hydrophobic and one hydrophilic component can have a very low surface tension toward the solvent. Then, the more soluble component is enriched at the surface of the complex and acts as a microsurfactant. Although segregation dominates for amphiphilic copolymers in solution, the effect of the complexation can be enhanced by branching (change of architecture). Another possibility to enhance the complexation is by confining copolymers in a (pseudo-) 2D environment (like the one available at liquid-liquid interfaces). These observations show how new structural features can be achieved by tuning the subtle balance between segregation and complexation/solubilization.

Temperature-induced structure switch in thermo-responsive micellar interpolyelectrolyte complexes: toward core-shell-corona and worm-like morphologies.

The spontaneous formation and thermo-responsiveness of a colloidally-stable interpolyelectrolyte complex (IPEC) based on a linear temperature-sensitive diblock copolymer poly(vinyl sulfonate)31-b-poly(N-isopropyl acrylamide)27 (PVS31-b-PNIPAM27) and a star-shaped quaternized miktoarm polymer poly(ethylene oxide)114-(poly(2-(dimethylamino)ethyl methacrylate)17)4 (PEO114-(qPDMAEMA17)4) was investigated in aqueous media at 0.3 M NaCl by means of dynamic light scattering (DLS), small angle X-ray scattering (SAXS), and cryogenic transmission electron microscopy (cryo-TEM). The micellar macromolecular co-assemblies show a temperature-dependent size and morphology, which result from the lower critical solution temperature (LCST) behavior of the PNIPAM-blocks. Hence, the micellar co-assemblies grow upon heating. At 60 °C, spherical core-shell-corona co-assemblies are proposed with a hydrophobic PNIPAM core, a water-insoluble IPEC shell, and a hydrophilic PEO corona. These constructs develop into a rod-like structure upon extended equilibration. In turn, PEO-arms and PNIPAM-blocks within a hydrophilic mixed two-component corona surround the water-insoluble IPEC domain at 20 °C, thereby forming spherical core-corona co-assemblies. Reversibility of the structural changes is suggested by the scattering data. This contribution addresses the use of a combination of oppositely charged thermo-responsive and bis-hydrophilic star-shaped polymeric components toward IPECs of diverse morphological types.

Microstructured Hydrogel Templates for the Formation of Conductive Gold Nanowire Arrays.

Microstructured hydrogel allows for a new template-guided method to obtain conductive nanowire arrays on a large scale. To generate the template, an imprinting process is used in order to synthesize the hydrogel directly into the grooves of wrinkled polydimethylsiloxane (PDMS). The resulting poly(N-vinylimidazole)-based hydrogel is defined by the PDMS stamp in pattern and size. Subsequently, tetrachloroaurate(III) ions from aqueous solution are coordinated within the humps of the N-vinylimidazole-containing polymer template and reduced by air plasma. After reduction and development of the gold, to achieve conductive wires, the extension perpendicular to the long axis (width) of the gold strings is considerably reduced compared to the dimension of the parental hydrogel wrinkles (from ≈1 µm down to 200-300 nm). At the same time, the wire-to-wire distance and the overall length of the wires is preserved. The PDMS templates and hydrogel structures are analyzed with scanning force microscopy (SFM) and the gold structures via scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy. The conductivity measurements of the gold nanowires are performed in situ in the SEM, showing highly conductive gold leads. Hence, this method can be regarded as a facile nonlithographic top-down approach from micrometer-sized structures to nanometer-sized features.

Poly(iminoborane)s: An Elusive Class of Main-Group Polymers?

The significance of inorganic main-group polymers is demonstrated most clearly by the commercial relevance of polysiloxanes (silicones). Organoboron-based materials such as π-conjugated organoborane polymers and BN-doped polycyclic aromatic hydrocarbons are currently attracting considerable attention. Surprisingly, poly(iminoborane)s (PIBs; [BRNR']n ), that is, the parent unsaturated BN polymers, which are formally isoelectronic to polyacetylene, have not been convincingly characterized thus far. Herein, we present the synthesis and comprehensive characterization of a linear oligo(iminoborane), which comprises a chain of 12-14 BN units on average. With our synthetic approach, unwanted side reactions that result in borazine formation are effectively suppressed. Supporting DFT and TD-DFT calculations provide deeper insight into the microstructure and the electronic structure of the oligomer.

Dehydrocoupling and Silazane Cleavage Routes to Organic-Inorganic Hybrid Polymers with NBN Units in the Main Chain.

Despite the great potential of both π-conjugated organoboron polymers and BN-doped polycyclic aromatic hydrocarbons in organic optoelectronics, our knowledge of conjugated polymers with B-N bonds in their main chain is currently scarce. Herein, the first examples of a new class of organic-inorganic hybrid polymers are presented, which consist of alternating NBN and para-phenylene units. Polycondensation with B-N bond formation provides facile access to soluble materials under mild conditions. The photophysical data for the polymer and molecular model systems of different chain lengths reveal a low extent of π-conjugation across the NBN units, which is supported by DFT calculations. The applicability of the new polymers as macromolecular polyligands is demonstrated by a cross-linking reaction with Zr(IV) .

Engineering Systems with Spatially Separated Enzymes via Dual-Stimuli-Sensitive Properties of Microgels.

This work examines the adsorption regime and the properties of microgel/enzyme thin films deposited onto conductive graphite-based substrates. The films were formed via two-step sequential adsorption. A temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA microgel) was adsorbed first, followed by its interaction with the enzymes, choline oxidase (ChO), butyrylcholinesterase (BChE), or mixtures thereof. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT followed by short washing and drying and then (ii) enzyme loading at T < VPTT, we can effectively control the amount of the microgel adsorbed on a hydrophobic interface as well as the amount and the spatial localization of the enzyme interacted with the microgel film. Depending on the biomolecule size, enzyme molecules can (in the case for ChO) or cannot (in the case for BChE) penetrate into the microgel interior and be localized inside/outside the microgel particles. Different spatial localization, however, does not affect the specific enzymatic responses of ChO or BChE and does not prevent cascade enzymatic reaction involving both BChE and ChO as well. This was shown by the methods of electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and amperometric analysis of enzymatic responses of immobilized enzymes. Thus, a novel simple and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed, which can be used for engineering systems with spatially separated enzymes of different types.

Interface-enforced complexation between copolymer blocks.

Binary diblock copolymers and corresponding ternary miktoarm stars are studied at oil-water interfaces. All polymers contain oil-soluble poly(propylene oxide) PPO, water-soluble poly(dimethylaminoethyl methacrylate) PDMAEMA and/or poly(ethylene oxide) PEO. The features of their Langmuir compression isotherms are well related to the ones of the corresponding homopolymers. Within the Langmuir-trough, PEO-b-PPO acts as the most effective amphiphile compared to the other PPO-containing copolymers. In contrast, the compression isotherms show a complexation of PPO and PDMAEMA for PPO-b-PDMAEMA and the star, reducing their overall amphiphilicity. Such complex formation between the blocks of PPO-b-PDMAEMA is prevented in bulk water but facilitated at the interface. The weakly-interacting blocks of PPO-b-PDMAEMA form a complex due to their enhanced proximity in such confined environments. Scanning force microscopy and Monte Carlo simulations with varying confinement support our results, which are regarded as compliant with the mathematical random walk theorem by Pólya. Finally, the results are expected to be of relevance for e.g. emulsion formulation and macromolecular engineering.

Efficient size control of copper nanoparticles generated in irradiated aqueous solutions of star-shaped polyelectrolyte containers.

The formation of copper nanoparticles (Cu-NPs) in irradiated aqueous solutions of star-shaped poly(acrylic acid) (PAA) were studied at two pH values. Transmission electron microscopy (TEM) demonstrates that the star-shaped macromolecules loaded with Cu(2+) ions can act as individual nanosized containers providing a perfect control over the size and size distribution of Cu-NPs. Electron paramagnetic resonance (EPR) and optical spectroscopy show a transformation of mechanisms controlling the reduction of Cu(2+) ions and the further formation of Cu-NPs. At pH 2.9, Cu-NPs are formed from the aquacomplexes of Cu(2+) ions through homogeneous nucleation. At pH 4.3, the formation of Cu-NPs occurs inside macromolecular containers loaded with Cu(2+) ions, which are bound to carboxylic groups of the polyelectrolyte. In the latter case, Cu-NPs apparently ripen from preformed hydrated Cu2O seeds, which are thought to result from the ultrasmall (Cu(2+))m(OH(-))k(COO(-))n species, thus implying a heterogeneous nucleation.

Insight in the phase separation peculiarities of poly(dialkylaminoethyl methacrylate)s.

The thermoresponsive and pH-sensitive behavior of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA), poly(N,N-diethylaminoethyl methacrylate) (PDEAEMA), and poly(N,N-diisopropylaminoethyl methacrylate) (PDiPAEMA) is compared by use of different techniques. We employed temperature- and pH-dependent turbidimetry, fluorescence spectroscopy (of the polarity indicator 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran, 4HP, which is sometimes also abbreviated as DCM), and IR spectroscopy (of the carbonyl band). Within specific pH windows, all polymers showed phase separation at elevated temperatures (showing a lower critical solution temperature behavior, an LCST behavior). By increasing the hydrophobicity of the dialkylaminoethyl substituent, the phase separation is shifted to lower pH (at constant temperatures; pH(PDMAEMA) > pH(PDEAEMA) > pH(PDiPAEMA)) or to lower temperatures (at constant pH; T(PDMAEMA) > T(PDEAEMA) > T(PDiPAEMA)). While PDMAEMA does not exhibit pronounced changes in polarity upon phase separation (as seen by fluorescence spectroscopy), PDEAEMA and PDiPAEMA provide a nonpolar surrounding for the 4HP uptake above their collapse. In addition, PDiPAEMA causes the sharpest transition (as seen by the 4HP probe), although the carbonyl hydration experiences a more gradual (sigmoidal) transition for all polymers (as seen by IR). These observations allow a distinction of the phase separation mechanisms. While the LCST properties of PDMAEMA are mainly caused by backbone/carbonyl interactions, its rather polar dimethylaminoethyl group does not inflict pronounced hydrophobicity, but promotes a higher water content within the phase-separated polymer. In contrast, the phase separation of PDEAEMA and PDiPAEMA is mainly influenced by the less polar dialkylaminoethyl groups, leading to drastic changes in the hydrophobicity around the cloud points. Further, the IR data suggest that the diisopropylaminoethyl groups of PDiPAEMA tend to backfold to the carbonyl groups/backbone to minimize water-polymer contact already in its soluble state. Finally, this study might lead to advanced lasing applications of the laser dye 4HP.

Dual-stimuli-sensitive microgels as a tool for stimulated spongelike adsorption of biomaterials for biosensor applications.

This work examines the fabrication regime and the properties of microgel and microgel/enzyme thin films adsorbed onto conductive substrates (graphite or gold). The films were formed via two sequential steps: the adsorption of a temperature- and pH-sensitive microgel synthesized by precipitation copolymerization of N-isopropylacrylamide (NIPAM) and 3-(N,N-dimethylamino)propylmethacrylamide (DMAPMA) (poly(NIPAM-co-DMAPMA) at the pH-condition corresponding to its noncharged state (first step of adsorption), followed by the enzyme, tyrosinase, adsorption at the pH-condition when the microgel and the enzyme are oppositely charged (second step of adsorption). The stimuli-sensitive properties of poly(NIPAM-co-DMAPMA) microgel were characterized by potentiometric titration and dynamic light scattering (DLS) in solution as well as by atomic force microscopy (AFM) and quartz crystal microbalance with dissipation monitoring (QCM-D) at solid interface. Enhanced deposition of poly(NIPAM-co-DMAPMA) microgel particles was shown at elevated temperatures exceeding the volume phase transition temperature (VPTT). The subsequent electrostatic interaction of the poly(NIPAM-co-DMAPMA) microgel matrix with tyrosinase was examined at different adsorption regimes. A considerable increase in the amount of the adsorbed enzyme was detected when the microgel film is first brought into a collapsed state but then was allowed to interact with the enzyme at T < VPTT. Spongelike approach to enzyme adsorption was applied for modification of screen-printed graphite electrodes by poly(NIPAM-co-DMAPMA)/tyrosinase films and the resultant biosensors for phenol were tested amperometrically. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT and (ii) following spongelike tyrosinase loading at T < VPTT, we can achieve more than 3.5-fold increase in biosensor sensitivity for phenol assay. Thus, a very simple, novel, and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed and tested. Being based on this unique stimuli-sensitive behavior of the microgel, this stimulated spongelike adsorption provides polymer films comprising concentrated biomaterial.

Effects of architecture on the stability of thermosensitive unimolecular micelles.

The influence of architecture on polymer interactions is investigated and differences between branched and linear copolymers are found. A comprehensive picture is drawn with the help of a fluorescence approach (using pyrene and 4HP as probe molecules) together with IR or NMR spectroscopy and X-ray/light scattering measurements. Five key aspects are addressed: (1) synergistic intramolecular complexation within miktoarm stars. The proximity of thermoresponsive poly(propylene oxide) (PPO) and poly(dimethylaminoethyl methacrylate) (PDMAEMA) within a miktoarm star leads to complexation between these weakly interacting partners. Consequently, the original properties of the constituents are lost, showing hydrophobic domains even at low temperatures, at which all homopolymers are water soluble. (2) Unimolecular micelles for miktoarm stars. The star does not exhibit intermolecular self-assembly in a large temperature range, showing unimers up to 55 °C. This behavior was traced back to a reduced interfacial tension between the PPO-PDMAEMA complex and water (PDMAEMA acts as a "microsurfactant"). (3) Unimolecular to multimolecular micelle transition for stars. The otherwise stable unimolecular micelles self-assemble above 55 °C. This aggregation is not driven by PPO segregation, but by collapse of residual PDMAEMA. This leads to micrometer-sized multilamellar vesicles stabilized by poly(ethylene oxide) (PEO). (4) Prevention of pronounced complexation within diblock copolymers. In contrast to the star copolymers, PPO and PDMAEMA adapt rather their homopolymer behavior within the diblock copolymers. Then they show their immanent LCST properties, as PDMAEMA turns insoluble at elevated temperatures, whereas PPO becomes hydrophobic below room temperature. (5) Two-step micellization for diblock copolymers. Upon heating of linear copolymers, the dehydration of PPO is followed by self-assembly into spherical micelles. An intermediate prevalence of unimolecular micelles is revealed in a small temperature window between PPO collapse and self-assembly of PEO-b-PPO. Also for PPO-b-PDMAEMA, PPO segregation prevails after initial weak complexation, leading to micelles with a PPO core. Considerable amounts of water are entrapped within the collapsed PDMAEMA domains above 55 °C (skin effect), preventing PPO-PDMAEMA complexation within precipitating PPO-b-PDMAEMA. Further, collapsed PDMAEMA is rather polar as sensed by pyrene and 4HP. In summary, advanced macromolecular architectures can lead to an unprecedented intramolecular self-assembly behavior, where internal complexation prevents intermolecular aggregation.

Spontaneous assembly of miktoarm stars into vesicular interpolyelectrolyte complexes.

Mixing a bis-hydrophilic, cationic miktoarm star polymer with a linear polyanion leads to the formation of unilamellar polymersomes, which consist of an interpolyelectrolyte complex (IPEC) wall sandwiched between poly(ethylene oxide) brushes. The experimental finding of this rare IPEC morphology is rationalized theoretically: the star architecture forces the assembly into a vesicular shape due to the high entropic penalty for stretching of the insoluble arms in non-planar morphologies. The transmission electron microscopy of vitrified samples (cryogenic TEM) is compared with the samples at ambient conditions (in situ TEM), giving one of the first TEM reports on soft matter in its pristine environment.

Nonequilibrium Colloids: Temperature-Induced Bouquet Formation of Flower-like Micelles as a Time-Domain-Shifting Macromolecular Heat Alert.

Climate change requires enhanced autonomous temperature monitoring during logistics/transport. A cheap approach comprises the use of temperature-sensitive copolymers that undergo temperature-induced irreversible coagulation. The synthesis/characterization of pentablock copolymers (PBCP) starting from poloxamer PEO130-b-PPO44-b-PEO130 (poly(ethylene oxide)130-b-poly(propylene oxide)44-b-poly(ethylene oxide)130) and adding two terminal qPDMAEMA85 (quaternized poly[(2-dimethylamino)ethyl methacrylate]85) blocks is presented. Mixing of PBCP solutions with hexacyanoferrate(III)/ferricyanide solutions leads to a reduction of the decane/water interfacial tension accompanied by a co/self-assembly toward flower-like micelles in cold water because of the formation of an insoluble/hydrophobic qPDMAEMA/ferricyanide complex. In cold water, the PEO/PPO blocks provide colloidal stability over months. In hot water, the temperature-responsive PPO block is dehydrated, leading to a pronounced temperature dependence of the oil-water interfacial tension. In solution, the sticky PPO segments exposed at the micellar corona cause a colloidal clustering above a certain threshold temperature, which follows Smoluchowski-type kinetics. This coagulation remains for months even after cooling, indicating the presence of a kinetically trapped nonequilibrium state for at least one of the observed micellar structures. Therefore, the system memorizes a previous suffering of heat. This phenomenon is linked to an exchange of qPDMAEMA-blocks bridging the micellar cores after PPO-induced clustering. The addition of ferrous ions hampers the exchange, leading to the reversible coagulation of Prussian blue loaded micelles. Hence, the Fe2+ addition causes a shift from history monitoring to the sensing of the present temperature. Presumably, the system can be adapted for different temperatures in order to monitor transport and storage in a simple way. Hence, these polymeric "flowers" could contribute to preventing waste and sustaining the quality of goods (e.g., food) by temperature-induced bouquet formation, where an irreversible exchange of "tentacles" between the flowers stabilizes the bouquet at other temperatures as well.

pH-controlled exponential and linear growing modes of layer-by-layer assemblies of star polyelectrolytes.

We report the unique layer-by-layer (LbL) assembly behavior of pH-sensitive star-shaped polyelectrolytes with both linear and exponential growth modes controlled by star architecture and assembly conditions. Cationic poly[2-(dimethylamino)ethyl methacrylate] and anionic poly(acrylic acid) stars were synthesized via "core-first" atom-transfer radical polymerization (ATRP) based on multifunctional initiators, in addition to their linear analogues. We demonstrated the LbL growth behavior as a function of deposition pH (ranging from 5 to 7), number of layers (up to 30 bilayers), and the method of assembly (dip- vs spin-assisted LbL). The spin-assisted LbL assembly makes it possible to render smoother and thinner LbL films with parameters controlled by the shear rate and pH conditions. In contrast, for dip-assisted LbL assembly, the pH-dependent exponential growth was observed for both linear and star polyelectrolytes. In the case of linear/linear pair, the exponential buildup was accompanied with a notable surface segregation which resulted in dramatic surface nonuniformity, "wormlike" heterogeneous morphology, and dramatic surface roughening. In contrast, star/linear and star/star LbL films showed very uniform and smooth surface morphology (roughness below 2.0 nm on the scale of 10 µm × 10 µm) with much larger thickness reaching up to 1.0 µm for 30 bilayers and rich optical interference effects. Star polyelectrolytes with partially screened charges and high mobility caused by compact branched architecture appear to facilitate fast diffusion and exponential buildup of LbL films. We suggest that the fast buildup prevents long-range lateral diffusion of polyelectrolyte star components, hinders large-scale microphase separation, and thus leads to unique thick, smooth, uniform, transparent, and colorful LbL films from star polyelectrolytes in contrast to mostly heterogeneous films from traditional linear counterparts.

PEO-b-PPO star-shaped polymers enhance the structural stability of electrostatically coupled liposome/polyelectrolyte complexes.

We propose a strategy to counteract the salt-driven disassembly of multiliposomal complexes made by electrostatic co-assembly of anionic small unilamellar liposomes and cationic star-shaped polyelectrolytes (made of quaternized poly(dimethylaminoethyl methacrylate) (qPDMAEMA100)3.1). The combined action of (qPDMAEMA100)3.1 and a nonionic star-shaped polymer (PEO12-b-PPO45)4, which comprises diblock copolymer arms uniting a poly(ethylene oxide) PEO inner block and a poly(propylene oxide) PPO terminal block, leads to a stabilization of these complexes against disintegration in saline solutions. Hereby, the anchoring of the PPO terminal blocks to the lipid bilayer and the bridging between several liposomes are at the origin of the promoted structural stability. Two-focus fluorescence correlation spectroscopy verifies the formation of multiliposomal complexes with (PEO12-b-PPO45)4. The polyelectrolyte and the amphiphilic polymer work synergistically, as the joint action still assures some membrane integrity, which is not seen for the mere (PEO12-b-PPO45)4-liposome interaction alone.