Highly-multiplexed and efficient long-amplicon PacBio and Nanopore sequencing of hundreds of full mitochondrial genomes.

BACKGROUND: Mitochondrial genome sequences have become critical to the study of biodiversity. Genome skimming and other short-read based methods are the most common approaches, but they are not well-suited to scale up to multiplexing hundreds of samples. Here, we report on a new approach to sequence hundreds to thousands of complete mitochondrial genomes in parallel using long-amplicon sequencing. We amplified the mitochondrial genome of 677 specimens in two partially overlapping amplicons and implemented an asymmetric PCR-based indexing approach to multiplex 1,159 long amplicons together on a single PacBio SMRT Sequel II cell. We also tested this method on Oxford Nanopore Technologies (ONT) MinION R9.4 to assess if this method could be applied to other long-read technologies. We implemented several optimizations that make this method significantly more efficient than alternative mitochondrial genome sequencing methods. RESULTS: With the PacBio sequencing data we recovered at least one of the two fragments for 96% of samples (~ 80-90%) with mean coverage ~ 1,500x. The ONT data recovered less than 50% of input fragments likely due to low throughput and the design of the Barcoded Universal Primers which were optimized for PacBio sequencing. We compared a single mitochondrial gene alignment to half and full mitochondrial genomes and found, as expected, increased tree support with longer alignments, though whole mitochondrial genomes were not significantly better than half mitochondrial genomes. CONCLUSIONS: This method can effectively capture thousands of long amplicons in a single run and be used to build more robust phylogenies quickly and effectively. We provide several recommendations for future users depending on the evolutionary scale of their system. A natural extension of this method is to collect multi-locus datasets consisting of mitochondrial genomes and several long nuclear loci at once.

Portable sequencing as a teaching tool in conservation and biodiversity research.

As biodiversity loss continues to accelerate, there is a critical need for education and biomonitoring across the globe. Portable technologies allow for in situ molecular biodiversity monitoring that has been historically out of reach for many researchers in habitat nations. In the realm of education, portable tools such as DNA sequencers facilitate in situ hands-on training in real-time sequencing and interpretation techniques. Here, we provide step-by-step protocols as a blueprint for a terrestrial conservation genetics field training program that uses low-cost, portable devices to conduct genomics-based training directly in biodiverse habitat countries.

Preliminary Validation of Two Brief Measures of Masculine and Feminine Honor Endorsement.

Researchers have developed numerous individual differences measures to assess people's endorsement of honor ideology (i.e., beliefs regarding the importance of honor and reputation) with most ranging from 12-36 items in length. Despite having great utility, the length of these measures magnifies the costs associated with survey research, especially in research contexts that use large, representative samples (e.g., health surveys). The present study aimed to develop and validate single-item measures that assess participants' agreement with gender-specific honor prototypes, as well as short-form versions of the honor ideology for manhood (HIM) and honor ideology for womanhood (HIW) scales. An initial sample of participants (N = 879) completed single-item honor prototype measures, a battery of previously validated honor measures (including the HIM and HIW), and measures of constructs previously shown to be related to the dynamics of honor (e.g., aggression, firearm ownership). A second sample of participants (N = 100) completed the new measures, as well as an abbreviated battery of honor measures, to examine test-retest reliability. Results indicated that the new, brief measures were strongly correlated with both the original HIM and HIW as well as several other established honor measures. Moreover, the associations between these new measures and honor-related outcomes were nearly identical to those found with the original HIM and HIW. Our new measures also demonstrated acceptable test-retest reliability, despite being single-item scales. Overall, the present work provides preliminary support for several brief measures of honor endorsement that researchers can use when longer scales are not feasible.

Invincible honor: masculine honor, perceived invulnerability, and risky decision-making.

Masculine honor ideology is characterized by the cultivation, maintenance, and defense of reputations for toughness, bravery, and strength. The link between masculine honor endorsement and increased risk-taking - especially an increased tolerance for and even expectation of violence - is well-established in the literature. However, little empirical research has examined what factors might explain this relationship. This study investigates perceived invulnerability, the cognitive bias that one is immune to threats, as a mediator in the relationship between masculine honor ideology and risky decision-making. Results show moderate support for this relationship's existence. These findings elaborate on previous research between honor and specific risky decisions by demonstrating honor to instill cognitive biases in its adherents that make them more tolerant of risk, and thus more likely to decide to engage in risky behaviors. The implications of these findings for interpreting previous research, guiding future research, and pursuing specific educational and policy-based efforts are discussed.

A 3D-printed hand-powered centrifuge for molecular biology.

The centrifuge is an essential tool for many aspects of research and medical diagnostics. However, conventional centrifuges are often inaccessible outside of standard laboratory settings, such as remote field sites, because they require a constant external power source and can be prohibitively costly in resource-limited settings and Science, technology, engineering, and mathematics (STEM)-focused programs. Here we present the 3D-Fuge, a 3D-printed hand-powered centrifuge, as a novel alternative to standard benchtop centrifuges. Based on the design principles of a paper-based centrifuge, this 3D-printed instrument increases the volume capacity to 2 mL and can reach hand-powered centrifugation speeds up to 6,000 rpm. The 3D-Fuge devices presented here are capable of centrifugation of a wide variety of different solutions such as spinning down samples for biomarker applications and performing nucleotide extractions as part of a portable molecular lab setup. We introduce the design and proof-of-principle trials that demonstrate the utility of low-cost 3D-printed centrifuges for use in remote field biology and educational settings.

Developmental, cellular and biochemical basis of transparency in clearwing butterflies.

The wings of butterflies and moths (Lepidoptera) are typically covered with thousands of flat, overlapping scales that endow the wings with colorful patterns. Yet, numerous species of Lepidoptera have evolved highly transparent wings, which often possess scales of altered morphology and reduced size, and the presence of membrane surface nanostructures that dramatically reduce reflection. Optical properties and anti-reflective nanostructures have been characterized for several 'clearwing' Lepidoptera, but the developmental processes underlying wing transparency are unknown. Here, we applied confocal and electron microscopy to create a developmental time series in the glasswing butterfly, Greta oto, comparing transparent and non-transparent wing regions. We found that during early wing development, scale precursor cell density was reduced in transparent regions, and cytoskeletal organization during scale growth differed between thin, bristle-like scale morphologies within transparent regions and flat, round scale morphologies within opaque regions. We also show that nanostructures on the wing membrane surface are composed of two layers: a lower layer of regularly arranged nipple-like nanostructures, and an upper layer of irregularly arranged wax-based nanopillars composed predominantly of long-chain n-alkanes. By chemically removing wax-based nanopillars, along with optical spectroscopy and analytical simulations, we demonstrate their role in generating anti-reflective properties. These findings provide insight into morphogenesis and composition of naturally organized microstructures and nanostructures, and may provide bioinspiration for new anti-reflective materials.

RNAi-mediated knockdown of transformer-2 in the predatory mite Metaseiulus occidentalis via oral delivery of double-stranded RNA.

Little is known about the process of sex determination at the molecular level in Metaseiulus occidentalis, a parahaploid species and natural enemy of phytophagous pest mites. Detailed knowledge of the sex-determination pathway could allow genetic manipulation of M. occidentalis to produce more female offspring, which could improve its effectiveness as a biological control agent. RNA interference is useful for assessing the function of putative sex-determination genes by reducing or eliminating gene expression. In many insect species the transformer-2 (tra-2) gene is an upstream regulatory element in the sex-determination cascade, and knockdown of tra-2 expression can alter the sex ratio. We assessed whether oral delivery of tra-2 double-stranded RNA to M. occidentalis virgin females would affect the sex of her progeny. Females that ingested tra-2 dsRNA produced significantly fewer eggs compared to control females suggesting that tra-2 is somehow involved in reproduction by females. However, the sex ratio of the few progeny that were laid was not altered, so it is unclear whether tra-2 is involved in sex determination. This is an initial step towards elucidating the molecular components of sex determination in M. occidentalis.

Expression analysis of Drosophila doublesex, transformer-2, intersex, fruitless-like, and vitellogenin homologs in the parahaploid predator Metaseiulus occidentalis (Chelicerata: Acari: Phytoseiidae).

Characterization and expression analyses are essential to gain insight into sex-determination pathways in members of the Acari. Little is known about sex determination at the molecular level in the western orchard predatory mite Metaseiulus occidentalis (Arthropoda: Chelicerata: Arachnida: Acari: Phytoseiidae), a parahaploid species. In this study, eight genes previously identified as putative homologs to genes involved in the sex-determination pathway in Drosophila melanogaster were evaluated for sex-specific alternative splicing and sex-biased expression using reverse-transcriptase PCR and quantitative real-time PCR techniques, respectively. The homologs evaluated in M. occidentalis included two doublesex-like genes (Moccdsx1 and Moccdsx2), transformer-2 (Mocctra-2), intersex (Moccix), two fruitless-like genes (MoccBTB1 and MoccBTB2), as well as two vitellogenin-like genes (Moccvg1 and Moccvg2). Single transcripts of equal size were detected in males and females for Moccdsx1, Moccdsx2, Mocctra-2, Moccix, and MoccBTB2, suggesting that their pre-mRNAs do not undergo alternative splicing in a sex-specific manner. Three genes, Moccdsx1, Moccdsx2 and MoccBTB2, displayed male-biased expression relative to females. One gene, Moccix, displayed female-biased expression relative to males. Two genes, Mocctra-2 and MoccBTB1, did not display detectable differences in transcript abundance in males and females. Expression of Moccvg1 and Moccvg2 were detected in females only, and transcript levels were up-regulated in mated females relative to unmated females. To our knowledge, this represents the first attempt to elucidate expression patterns of putative sex-determination genes in an acarine. This study is an initial step towards understanding the sex-determination pathway in the parahaploid M. occidentalis.

Rapid in situ identification of biological specimens via DNA amplicon sequencing using miniaturized laboratory equipment.

In many parts of the world, human-mediated environmental change is depleting biodiversity faster than it can be characterized, while invasive species cause agricultural damage, threaten human health and disrupt native habitats. Consequently, the application of effective approaches for rapid surveillance and identification of biological specimens is increasingly important to inform conservation and biosurveillance efforts. Taxonomic assignments have been greatly advanced using sequence-based applications, such as DNA barcoding, a diagnostic technique that utilizes PCR and DNA sequence analysis of standardized genetic regions. However, in many biodiversity hotspots, endeavors are often hindered by a lack of laboratory infrastructure, funding for biodiversity research and restrictions on the transport of biological samples. A promising development is the advent of low-cost, miniaturized scientific equipment. Such tools can be assembled into functional laboratories to carry out genetic analyses in situ, at local institutions, field stations or classrooms. Here, we outline the steps required to perform amplicon sequencing applications, from DNA isolation to nanopore sequencing and downstream data analysis, all of which can be conducted outside of a conventional laboratory environment using miniaturized scientific equipment, without reliance on Internet connectivity. Depending on sample type, the protocol (from DNA extraction to full bioinformatic analyses) can be completed within 10 h, and with appropriate quality controls can be used for diagnostic identification of samples independent of core genomic facilities that are required for alternative methods.

Mimicry can drive convergence in structural and light transmission features of transparent wings in Lepidoptera.

Müllerian mimicry is a positive interspecific interaction, whereby co-occurring defended prey species share a common aposematic signal. In Lepidoptera, aposematic species typically harbour conspicuous opaque wing colour patterns with convergent optical properties among co-mimetic species. Surprisingly, some aposematic mimetic species have partially transparent wings, raising the questions of whether optical properties of transparent patches are also convergent, and of how transparency is achieved. Here, we conducted a comparative study of wing optics, micro and nanostructures in neotropical mimetic clearwing Lepidoptera, using spectrophotometry and microscopy imaging. We show that transparency, as perceived by predators, is convergent among co-mimics in some mimicry rings. Underlying micro- and nanostructures are also sometimes convergent despite a large structural diversity. We reveal that while transparency is primarily produced by microstructure modifications, nanostructures largely influence light transmission, potentially enabling additional fine-tuning in transmission properties. This study shows that transparency might not only enable camouflage but can also be part of aposematic signals.

Genetic Biomonitoring and Biodiversity Assessment Using Portable Sequencing Technologies: Current Uses and Future Directions.

We live in an era of unprecedented biodiversity loss, affecting the taxonomic composition of ecosystems worldwide. The immense task of quantifying human imprints on global ecosystems has been greatly simplified by developments in high-throughput DNA sequencing technology (HTS). Approaches like DNA metabarcoding enable the study of biological communities at unparalleled detail. However, current protocols for HTS-based biodiversity exploration have several drawbacks. They are usually based on short sequences, with limited taxonomic and phylogenetic information content. Access to expensive HTS technology is often restricted in developing countries. Ecosystems of particular conservation priority are often remote and hard to access, requiring extensive time from field collection to laboratory processing of specimens. The advent of inexpensive mobile laboratory and DNA sequencing technologies show great promise to facilitate monitoring projects in biodiversity hot-spots around the world. Recent attention has been given to portable DNA sequencing studies related to infectious organisms, such as bacteria and viruses, yet relatively few studies have focused on applying these tools to Eukaryotes, such as plants and animals. Here, we outline the current state of genetic biodiversity monitoring of higher Eukaryotes using Oxford Nanopore Technology's MinION portable sequencing platform, as well as summarize areas of recent development.

Nanopore sequencing of long ribosomal DNA amplicons enables portable and simple biodiversity assessments with high phylogenetic resolution across broad taxonomic scale.

BACKGROUND: In light of the current biodiversity crisis, DNA barcoding is developing into an essential tool to quantify state shifts in global ecosystems. Current barcoding protocols often rely on short amplicon sequences, which yield accurate identification of biological entities in a community but provide limited phylogenetic resolution across broad taxonomic scales. However, the phylogenetic structure of communities is an essential component of biodiversity. Consequently, a barcoding approach is required that unites robust taxonomic assignment power and high phylogenetic utility. A possible solution is offered by sequencing long ribosomal DNA (rDNA) amplicons on the MinION platform (Oxford Nanopore Technologies). FINDINGS: Using a dataset of various animal and plant species, with a focus on arthropods, we assemble a pipeline for long rDNA barcode analysis and introduce a new software (MiniBar) to demultiplex dual indexed Nanopore reads. We find excellent phylogenetic and taxonomic resolution offered by long rDNA sequences across broad taxonomic scales. We highlight the simplicity of our approach by field barcoding with a miniaturized, mobile laboratory in a remote rainforest. We also test the utility of long rDNA amplicons for analysis of community diversity through metabarcoding and find that they recover highly skewed diversity estimates. CONCLUSIONS: Sequencing dual indexed, long rDNA amplicons on the MinION platform is a straightforward, cost-effective, portable, and universal approach for eukaryote DNA barcoding. Although bulk community analyses using long-amplicon approaches may introduce biases, the long rDNA amplicons approach signifies a powerful tool for enabling the accurate recovery of taxonomic and phylogenetic diversity across biological communities.

Real-time DNA barcoding in a rainforest using nanopore sequencing: opportunities for rapid biodiversity assessments and local capacity building.

Background: Advancements in portable scientific instruments provide promising avenues to expedite field work in order to understand the diverse array of organisms that inhabit our planet. Here, we tested the feasibility for in situ molecular analyses of endemic fauna using a portable laboratory fitting within a single backpack in one of the world's most imperiled biodiversity hotspots, the Ecuadorian Chocó rainforest. We used portable equipment, including the MinION nanopore sequencer (Oxford Nanopore Technologies) and the miniPCR (miniPCR), to perform DNA extraction, polymerase chain reaction amplification, and real-time DNA barcoding of reptile specimens in the field. Findings: We demonstrate that nanopore sequencing can be implemented in a remote tropical forest to quickly and accurately identify species using DNA barcoding, as we generated consensus sequences for species resolution with an accuracy of >99% in less than 24 hours after collecting specimens. The flexibility of our mobile laboratory further allowed us to generate sequence information at the Universidad Tecnológica Indoamérica in Quito for rare, endangered, and undescribed species. This includes the recently rediscovered Jambato toad, which was thought to be extinct for 28 years. Sequences generated on the MinION required as few as 30 reads to achieve high accuracy relative to Sanger sequencing, and with further multiplexing of samples, nanopore sequencing can become a cost-effective approach for rapid and portable DNA barcoding. Conclusions: Overall, we establish how mobile laboratories and nanopore sequencing can help to accelerate species identification in remote areas to aid in conservation efforts and be applied to research facilities in developing countries. This opens up possibilities for biodiversity studies by promoting local research capacity building, teaching nonspecialists and students about the environment, tackling wildlife crime, and promoting conservation via research-focused ecotourism.

Genome Sequencing of the Phytoseiid Predatory Mite Metaseiulus occidentalis Reveals Completely Atomized Hox Genes and Superdynamic Intron Evolution.

Metaseiulus occidentalis is an eyeless phytoseiid predatory mite employed for the biological control of agricultural pests including spider mites. Despite appearances, these predator and prey mites are separated by some 400 Myr of evolution and radically different lifestyles. We present a 152-Mb draft assembly of the M. occidentalis genome: Larger than that of its favored prey, Tetranychus urticae, but considerably smaller than those of many other chelicerates, enabling an extremely contiguous and complete assembly to be built-the best arachnid to date. Aided by transcriptome data, genome annotation cataloged 18,338 protein-coding genes and identified large numbers of Helitron transposable elements. Comparisons with other arthropods revealed a particularly dynamic and turbulent genomic evolutionary history. Its genes exhibit elevated molecular evolution, with strikingly high numbers of intron gains and losses, in stark contrast to the deer tick Ixodes scapularis Uniquely among examined arthropods, this predatory mite's Hox genes are completely atomized, dispersed across the genome, and it encodes five copies of the normally single-copy RNA processing Dicer-2 gene. Examining gene families linked to characteristic biological traits of this tiny predator provides initial insights into processes of sex determination, development, immune defense, and how it detects, disables, and digests its prey. As the first reference genome for the Phytoseiidae, and for any species with the rare sex determination system of parahaploidy, the genome of the western orchard predatory mite improves genomic sampling of chelicerates and provides invaluable new resources for functional genomic analyses of this family of agriculturally important mites.

Molecular characterization and evolutionary insights into potential sex-determination genes in the western orchard predatory mite Metaseiulus occidentalis (Chelicerata: Arachnida: Acari: Phytoseiidae).

Little is known about the process of sex determination at the molecular level in species belonging to the subclass Acari, a taxon of arachnids that contains mites and ticks. The recent sequencing of the transcriptome and genome of the western orchard predatory mite Metaseiulus occidentalis allows investigation of molecular mechanisms underlying the biological processes of sex determination in this predator of phytophagous pest mites. We identified four doublesex-and-mab-3-related transcription factor (dmrt) genes, one transformer-2 gene, one intersex gene, and two fruitless-like genes in M. occidentalis. Phylogenetic analyses were conducted to infer the molecular relationships to sequences from species of arthropods, including insects, crustaceans, acarines, and a centipede, using available genomic data. Comparative analyses revealed high sequence identity within functional domains and confirmed that the architecture for certain sex-determination genes is conserved in arthropods. This study provides a framework for identifying potential target genes that could be implicated in the process of sex determination in M. occidentalis and provides insight into the conservation and change of the molecular components of sex determination in arthropods.