Precise control over gas-transporting channels in zeolitic imidazolate framework glasses.

Porous metal-organic frameworks have emerged to resolve important challenges of our modern society, such as CO2 sequestration. Zeolitic imidazolate frameworks (ZIFs) can undergo a glass transition to form ZIF glasses; they combine the liquid handling of classical glasses with the tremendous potential for gas separation applications of ZIFs. Using millimetre-sized ZIF-62 single crystals and centimetre-sized ZIF-62 glass, we demonstrate the scalability and processability of our materials. Further, following the evolution of gas penetration into ZIF crystals and ZIF glasses by infrared microimaging techniques, we determine the diffusion coefficients and changes to the pore architecture on the ångström scale. The evolution of the material on melting and processing is observed in situ on different length scales by using a microscope-coupled heating stage and analysed microstructurally by transmission electron microscopy. Pore collapse during glass processing is further tracked by changes in the volume and density of the glasses. Mass spectrometry was utilized to investigate the crystal-to-glass transition and thermal-processing ability. The controllable tuning of the pore diameter in ZIF glass may enable liquid-processable ZIF glass membranes for challenging gas separations.

Physicochemical Methods for the Structuring and Assembly of MOF Crystals.

ConspectusMetal-organic frameworks (MOFs) are promising for various applications through the creation of innovative materials and assemblies. This potential stems from their modular nature, as diverse metal ions and organic linkers can be combined to produce MOFs with unique chemical properties and lattice structures. Following extensive research on the design and postsynthetic chemical modification of MOF lattices at the molecular level, increasing attention is now focused on the next hierarchical level: controlling the morphology of MOF crystals and their subsequent assembly and positioning to create functional composites.Beyond well-established methods to regulate crystal size and shape through nucleation and coordination modulation, physicochemical techniques leveraging wetting effects, interparticle interactions, and magnetic or electric fields offer attractive avenues for the hierarchical structuring and assembly of MOFs. These techniques facilitate crystal alignment and yield unique superstructures. While our research group primarily focuses on directing MOF crystal orientation and positioning using external stimuli such as magnetic and electric fields, we also explore hierarchical MOF synthesis and structuring using liquid interfaces and depletion force-assisted packing.This account highlights our journey and progress in developing methods to regulate the morphology, assembly, orientation, and positioning of MOF crystals, placed in the context of work by other groups. First, we examine commonly utilized structuring methods for MOF crystals that employ liquid-liquid and air-liquid interfaces to spatially confine reactions, allowing us to access unique morphologies such as mushroom-like crystals and Janus particles. We also discuss strategies for concentrating and packing MOF crystals into superstructures, utilizing fluid interfaces for spatial confinement of crystals, depletion forces, entropic effects, and crystal sedimentation.A particularly compelling challenge in expanding the applicability of MOF materials is how to manipulate free-standing MOF crystals. This issue is especially important because MOFs are typically produced as loose powders, and industrial material processing is generally more efficient when the material is fluidized. While extensive research has been conducted regarding MOF growth on substrates with both positional and orientational control, there is a clear need for similar precision with free-standing MOFs dispersed in a fluid matrix. Our group has thus focused on the relatively new, yet powerful approach of using electric and magnetic fields to manipulate MOF crystals, which offers unprecedented control over the orientation and positioning of dispersed MOF crystals, complementing the more well-established methods of MOF growth on substrates. In this Account, we provide foundational background and discussions on the interactions between these external fields and MOF crystals, including critical considerations for effective MOF manipulation using such techniques. We also discuss their unique advantages and applications, and briefly examine potential application areas, such as photonics, smart materials like soft robotics and absorbents, and sensing. This Account highlights the promising potential of well-organized and aligned MOF crystals over randomly oriented ones in various applications, owing to enhanced selectivity and performance. It underscores the importance of specialized assembly methods to advance materials science and engineering, encouraging the reader to explore such approaches.

Reactivity of Diamines in Acyclic Diamino Carbene Gold Complexes.

Acyclic diamino carbenes (ADCs) are interesting alternatives to their more widely studied N-heterocyclic carbene counterparts, particularly due to their greater synthetic accessibility and properties such as increased sigma donation and structural flexibility. ADC gold complexes are typically obtained through the reaction of equimolar amounts of primary/secondary amines on gold-coordinated isocyanide ligands. As such, the reaction of diamine nucleophiles to isocyanide gold complexes was expected to lead to bis-ADC gold compounds with potential applications in catalysis or as novel precursors for gold nanomaterials. However, the reaction of primary diamines with two equivalents of isocyanide gold chlorides resulted in only one of the amine groups reacting with the isocyanide carbon. The resulting ADC gold complexes bearing free amines dimerized via coordination of the amine to the partner gold atom, resulting in cyclic, dimeric gold complexes. In contrast, when secondary diamines were used, both amines reacted with an isocyanide carbon, leading to the expected bis-ADC gold complexes. Density functional theory calculations were performed to elucidate the differences in the reactivities between primary and secondary diamines. It was found that the primary amines were associated with higher reaction barriers than the secondary amines and hence slower reaction rates, with the formation of the second carbenes in the bis-ADC compounds being inhibitingly slow. It was also found that diamines have a unique reactivity due to the second amine serving as an internal proton shuttle.

Evaporation-Induced Self-Assembly of Small Peptide-Conjugated Silica Nanoparticles.

Self-assembly processes guide disordered molecules or particles into long-range organized structures due to specific supramolecular interactions among the building entities. Herein, we report a unique evaporation-induced self-assembly (EISA) strategy for four different silica nanoparticle systems obtained through peptide functionalization of the particle surface. First, covalent peptide-silica coupling was investigated in detail, starting with the grafting of a single amino acid (L-serine) and expanded to specific small peptides (up to four amino acids) and transferred to different particle types (MCM-48-type MSNs, solid nanoparticles, and newly developed virus-like nanoparticles). These materials were investigated regarding their ability to undergo EISA, which was shown to be independent of particle type and amount of peptide anchored to their surface. This EISA-based approach provides new possibilities for the design of future advanced drug delivery systems, engineered hierarchical sorbents, and nanocatalyst assemblies.

Synthetically Versatile Nitrogen Acyclic Carbene Stabilized Gold Nanoparticles.

N-heterocyclic carbenes (NHCs) have received significant attention as gold nanoparticle stabilizers due to their strong binding affinity towards gold. However, their tunability is limited by the difficulty in obtaining nonsymmetric NHCs. In this regard, N-acyclic carbenes (NACs) are attractive alternatives due to their high synthetic versatility, allowing easy tuning of their steric and electronic properties towards specific applications. This work reports the first series of stable and monodisperse NAC-functionalized gold nanoparticles. These particles with sizes ranging 3.8 to 11.6 nm were characterized using NMR, UV/Vis and TEM. The nanoparticles display good stability at elevated temperatures and for extended periods both dried or dispersed in a medium, as well as in the presence of exogenous thiols. Importantly, these NAC-stabilized gold nanoparticles offer a promising and versatile alternative to NHC-stabilized gold nanoparticles.

An ICP-MS-based assay for characterization of gold nanoparticles with potential biomedical use.

Most of potential diagnostic and therapeutic nanoparticles fail to reach clinical trials because assessment of their 'drug-like' properties is often overlooked during the discovery stage. This compromises the results of cell culture and animal experiments, making them insufficient to evaluate the lead candidates for testing on patients. In this study, we demonstrate the potential of high-resolution inductively coupled plasma mass spectrometry (ICP-MS) as a nanoparticle qualification tool. Using novel gold nanoparticles stabilized by N-heterocyclic carbenes as test nanoparticles, it was shown that important prerequisites for biomedical applications, such as resistance to the action of human serum milieu or reactivity toward serum biomolecules, can be reliably assessed by recording the signals of gold or sulfur isotopes. Implemented during the screening stage, the method would provide benefits in shortening timelines and reducing cost for selection and initial testing of medicinal nanoparticle candidates.

Dynamic Electric Field Alignment of Metal-Organic Framework Microrods.

Alignment of metal-organic framework (MOF) crystals has previously been performed via careful control of oriented MOF growth on substrates, as well as by dynamic magnetic alignment. We show here that bromobenzene-suspended microrod crystals of the MOF NU-1000 can also be dynamically aligned via electric fields, giving rise to rapid electrooptical responses. This method of dynamic MOF alignment opens up new avenues of MOF control which are important for integration of MOFs into switchable electronic devices as well as in other applications such as reconfigurable sensors or optical systems.

Magnetic Control of MOF Crystal Orientation and Alignment.

Most metal-organic frameworks (MOFs) possess anisotropic properties, the full exploitation of which necessitates a general strategy for the controllable orientation of such MOF crystals. Current methods largely rely upon layer-by-layer MOF epitaxy or tuning of MOF crystal growth on appropriate substrates, yielding MOFs with fixed crystal orientations. Here, the dynamic magnetic alignment of different MOF crystals (NH2 -MIL-53(Al) and NU-1000) is shown. The MOFs were magnetized by electrostatic adsorption of iron oxide nanoparticles, dispersed in curable polymer resins (Formlabs 1+ clear resin/ Sylgard 184), magnetically oriented, and fixed by resin curing. The importance of crystal orientation on MOF functionality was demonstrated whereby magnetically aligned NU-1000/Sylgard 184 composite was excited with linearly polarized 405 nm light, affording an anisotropic fluorescence response dependent on the polarization angle of the excitation beam relative to NU-1000 crystal orientation.

Non-Close-Packed Breath Figures via Ion-Partitioning-Mediated Self-Assembly.

We report a one-step method of forming non-close-packed (NCP) pore arrays of micro- and sub-micropores using chloroform-based solutions of polystyrene acidified with hydrogen bromide for breath figure (BF) patterning. As BF patterning takes place, water vapor condenses onto the polystyrene solution, forming water droplets on the solution surface. Concurrently, preferential ion partitioning of hydrogen bromide leads to positively charged water droplets, which experience interdroplet electrostatic repulsion. Self-organization of charged water droplets because of surface flow and subsequent evaporation of the droplet templates result in ordered BF arrays with pore separation/diameter (L/D) ratios of up to 16.5. Evidence from surface potential scans show proof for preferential ion partitioning of HBr. Radial distribution functions and Voronoi polygon analysis of pore arrays show that they possess a high degree of conformational order. Past fabrication methods of NCP structures typically require multi-step processes. In contrast, we have established a new route for facile self-assembly of previously inaccessible patterns, which comprises of only a single operational step.

Photoresponsive liquid marbles and dry water.

Stimuli-responsive liquid marbles for controlled release typically rely on organic moieties that require lengthy syntheses. We report herein a facile, one-step synthesis of hydrophobic and oleophobic TiO2 nanoparticles that display photoresponsive wettability. Water liquid marbles stabilized by these photoresponsive TiO2 particles were found to be stable when shielded from ultraviolet (UV) radiation; however, they quickly collapsed after being irradiated with 302 nm UV light. Oil- and organic-solvent-based liquid marbles could also be fabricated using oleophobic TiO2 nanoparticles and show similar UV-induced collapse. Finally, we demonstrated the formation of the micronized form of water liquid marbles, also known as dry water, by homogenization of the TiO2 nanoparticles with water. The TiO2 dry water displayed a similar photoresponse, whereby the micronized liquid marbles collapsed after irradiation and the dry water turned from a free-flowing powder to a paste. Hence, by exploiting the photoresponsive wettability of TiO2, we fabricated liquid marbles and dry water that display photoresponse and studied the conditions required for their collapse.

Transparent PDMS Surfaces with Covalently Attached Lubricants for Enhanced Anti-adhesion Performance.

Liquid-like surfaces featuring slippery, omniphobic, covalently attached liquids (SOCALs) reduce unwanted adhesion by providing a molecularly smooth and slippery surface arising from the high mobility of the liquid chains. Such SOCALs are commonly prepared on hard substrates, such as glass, wafers, or metal oxides, despite the importance of nonpolar elastomeric substrates, such as polydimethylsiloxane (PDMS) in anti-fouling or nonstick applications. Compared to polar elastomers, hydrophobic PDMS elastomer activation and covalent functionalization are significantly more challenging, as PDMS tends to display fast hydrophobic recovery upon activation as well as superficial cracking. Through the extraction of excess PDMS oligomers and fine-tuning of plasma activation parameters, homogeneously functionalized PDMS with fluorinated polysiloxane brushes could be obtained while at the same time reducing crack formation. Polymer brush mobility was increased through the addition of a smaller molecular silane linker to exhibit enhanced dewetting properties and reduced substrate swelling compared to functionalizations featuring hydrocarbon functionalities. Linear polymer brushes were verified by thermogravimetric analysis. The optical properties of PDMS remained unaffected by the activation in high-frequency plasma but were impacted by low-frequency plasma. Drastic decreases in solid adhesion of not just complex contaminants but even ice could be shown in horizontal push tests, demonstrating the potential of SOCAL-functionalized PDMS surfaces for improved nonstick applications.

Tuning omniphobicity via morphological control of metal-organic framework functionalized surfaces.

Fabrication of microstructures for imparting omniphobicity to a surface generally requires the use of lithographic techniques and specialized equipment. We report instead a simple strategy for the synthesis of microstructured surfaces via metal­organic framework (MOF) self-assembly. Our method allows us to localize epitaxial growth of MOF at the tips of needle crystals to create mushroom-shaped structures, thus conferring re-entrant textures to the MOF-functionalized surfaces. These structures synthesized via wet chemistry were found to have omniphobic properties due to the resulting re-entrant texture.

Hyper crosslinked polymer supported NHC stabilized gold nanoparticles with excellent catalytic performance in flow processes.

Highly active and selective heterogeneous catalysis driven by metallic nanoparticles relies on a high degree of stabilization of such nanomaterials facilitated by strong surface ligands or deposition on solid supports. In order to tackle these challenges, N-heterocyclic carbene stabilized gold nanoparticles (NHC@AuNPs) emerged as promising heterogeneous catalysts. Despite the high degree of stabilization obtained by NHCs as surface ligands, NHC@AuNPs still need to be loaded on support structures to obtain easily recyclable and reliable heterogeneous catalysts. Therefore, the combination of properties obtained by NHCs and support structures as NHC bearing "functional supports" for the stabilization of AuNPs is desirable. Here, we report the synthesis of hyper-crosslinked polymers containing benzimidazolium as NHC precursors to stabilize AuNPs. Following the successful synthesis of hyper-crosslinked polymers (HCP), a two-step procedure was developed to obtain HCP·NHC@AuNPs. Detailed characterization not only revealed the successful NHC formation but also proved that the NHC functions as a stabilizer to the AuNPs in the porous polymer network. Finally, HCP·NHC@AuNPs were evaluated in the catalytic decomposition of 4-nitrophenol. In batch reactions, a conversion of greater than 99% could be achieved in as little as 90 s. To further evaluate the catalytic capability of HCP·NHC@AuNP, the catalytic decomposition of 4-nitrophenol was also performed in a flow setup. Here the catalyst not only showed excellent catalytic conversion but also exceptional recyclability while maintaining the catalytic performance.

Fabrication of graded porous structure of hydroxypropyl cellulose hydrogels via temperature-induced phase separation.

A novel hydroxypropyl cellulose (gHPC) hydrogel with graded porosity has been fabricated, in which pore size, shape, and mechanical properties vary across the material. The graded porosity was achieved by cross-linking different parts of the hydrogel at temperatures below and above 42 °C, which was found to be the temperature of turbidity onset (lower critical solution temperature, LCST) for the HPC and divinylsulfone cross-linker mixture. Scanning electron microscopy imaging revealed a decreasing pore size along the cross-section of the HPC hydrogel from the top to the bottom layer. HPC hydrogels demonstrate graded mechanical properties whereby the top layer, Zone 1, cross-linked below LCST, can be compressed by about 50% before fracture, whereas the middle and bottom layers (Zone 2 and 3, respectively) cross-linked at 42 °C, can withstand 80% compression before failure. This work demonstrates a straightforward, yet novel, concept of exploiting a graded stimulus to incorporate a graded functionality into porous materials that can withstand mechanical stress and minor elastic deformations.

NHC stabilized copper nanoparticles via reduction of a copper NHC complex.

The bottom-up synthesis of plasmonic NHC@CuNPs from common starting reagents, via the formation of the synthetically accessible NHC-Cu(I)-Br complex and its reduction by NH3·BH3 is reported. The resulting NHC@CuNPs have been characterized in detail by XPS, TEM and NMR spectroscopy. The stability of NHC@CuNPs was investigated under both inert and ambient conditions using UV-Vis analysis. While the NHC@CuNPs are stable under inert conditions for an extended period of time, the NPs oxidize under air to form CuxO with concomitant release of the stabilizing NHC ligand.

Effect of reactivity on cellular accumulation and cytotoxicity of oxaliplatin analogues.

The purpose of this study was to systematically investigate the relationships between reactivity, cellular accumulation, and cytotoxicity of a panel of oxaliplatin analogues with different leaving groups in human carcinoma cells. The reactivity of the complexes towards the nucleotides 2'-deoxyguanosine 5'-monophosphate and 2'-deoxyadenosine 5'-monophosphate was studied using capillary electrophoresis. Cellular accumulation and cytotoxicity were measured in an oxaliplatin-sensitive and oxaliplatin-resistant ileocecal colorectal adenocarcinoma cell line pair (HCT-8/HCT-8ox). Platinum concentrations were determined by flameless atomic absorption spectrometry. The 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay was used to assess cytotoxicity. Early cellular platinum accumulation was predominantly affected by lipophilicity. A relationship between reactivity and cellular accumulation was observed for three of four platinum complexes investigated, whereas the most lipophilic oxaliplatin analogue was an exception. Increased reactivity and reduced lipophilicity were associated with high cytotoxic activity. Resistance was influenced by lipophilicity but not by reactivity. The observed relationships may help in the design of analogues with high antitumoral activity in oxaliplatin-sensitive as well as oxaliplatin-resistant cells.

Current Developments of N-Heterocyclic Carbene Au(I)/Au(III) Complexes toward Cancer Treatment.

Since their first discovery, N-heterocyclic carbenes have had a significant impact on organometallic chemistry. Due to their nature as strong σ-donor and π-acceptor ligands, they are exceptionally well suited to stabilize Au(I) and Au(III) complexes in biological environments. Over the last decade, the development of rationally designed NHCAu(I/III) complexes to specifically target DNA has led to a new "gold rush" in bioinorganic chemistry. This review aims to summarize the latest advances of NHCAu(I/III) complexes that are able to interact with DNA. Furthermore, the latest advancements on acyclic diamino carbene gold complexes with anticancer activity are presented as these typically overlooked NHC alternatives offer great additional design possibilities in the toolbox of carbene-stabilized gold complexes for targeted therapy.

CELLOPT: improved unit-cell parameters for electron diffraction data of small-molecule crystals.

Electron diffraction enables structure determination of organic small molecules using crystals that are too small for conventional X-ray crystallography. However, because of uncertainties in the experimental parameters, notably the detector distance, the unit-cell parameters and the geometry of the structural models are typically less accurate and precise compared with results obtained by X-ray diffraction. Here, an iterative procedure to optimize the unit-cell parameters obtained from electron diffraction using idealized restraints is proposed. The cell optimization routine has been implemented as part of the structure refinement, and a gradual improvement in lattice parameters and data quality is demonstrated. It is shown that cell optimization, optionally combined with geometrical corrections for any apparent detector distortions, benefits refinement of electron diffraction data in small-molecule crystallography and leads to more accurate structural models.

Sequence-complementarity dependent co-assembly of phosphodiester-linked aromatic donor-acceptor trimers.

We have created sequenced phosphoester-linked trimers of aromatic donor/acceptors which participate in charge-transfer interactions. Each sequence displays characteristic self-assembly, and complementary sequences interact with each other to produce new nanostructures and thermochromism. This paves the way towards new functional nanomaterials which make bio-analogous use of sequence to tune structure.

Metal-Organic Framework superstructures with long-ranged orientational order via E-field assisted liquid crystal assembly.

Most MOFs are non-cubic, with functionality dependent upon crystallographic direction, and are largely prepared as microcrystalline powders. Therefore, general methods to orient and assemble free-standing MOF crystals are especially important and urgently needed. This is addressed here through the novel strategy of E-field assisted liquid crystal assembly, applied to MIL-53-NH2(Al), MIL-68(In) and NU-1000 MOF crystals, with aspect ratios ranging from 10 to 1.2, to form highly oriented MOF superstructures which were photopolymerized to fix their long-ranged order. This new strategy for controlling MOF orientation and packing side-steps the traditional requirements of particle monodispersity, shape homogeneity and high aspect ratios (>4.7) typical of colloidal and liquid crystal assembly, and is applicable even to polydispersed MOF crystals, thereby paving the way towards the development of highly oriented MOF composites with improved functionality.